Antonio, Make a note that if a System has both a 10b9:5451 Audo (plus potential modem), and also 10b9:5457 Modem the 10b9:5451 most likely is not hosting a modem chip Presently I'll work this instruction into scanModem Dawitt, You need the ungrab-winmodem + slamr driver pair for service under your Ubuntu kernel 2.6.24-22-generic. There is a stock of driver installers at http://linmodems.technion.ac.il/packages/smartlink/Ubuntu/ but one has not been assembled for your particular 2.6.24-22-generic yet. But download the slamr-2.6.24-19-generic.tar.gz Next download from http://packages.ubuntu.com/hardy-updates/linux-image-2.6.24-19-generic the update kernel 2.6.24-19-generic . Install under Linux with: $ sudo dpkg -i linux*.deb Reboot under the new 2.6.24-19-generic kernel $ tar zxf slamr*.tar.gz $ cd slamr-2.6.24-19-generic $ ls Run the $ sudo ./setup Try to find out what the modem country code is for ETHIOPIA. It may be needed for a successful dialout. MarvS On Sat, Jan 3, 2009 at 11:20 AM, Antonio Olivares <olivares14031@xxxxxxxxx> wrote: > Dawitt, > > You have two possibilities one with SLMODEMD.gcc4.2.tar.gz, which I > would try first: > > Support type needed or chipset: slmodemd > > An ALSA (Advanced Linux Sound Architecture) modem driver: snd-ali5451 > provides Low Level support enabling contact with the modem hardware. > For all BUT Conexant chip soft modems (using hsfmodem software) > complementary High Level support is through a Smartlink utility: slmodemd > > Download from http://linmodems.technion.ac.il/packages/smartlink/ > the package SLMODEMD.gcc4.2.tar.gz having a compiled slmodemd. Unpack > under Linux with: > $ tar zxf SLMODEMD.gcc4.2.tar.gz > and read instructions therein. But briefly, the modem is setup with command: > sudo slmodemd -c YOUR_COUNTRY --alsa -shw:0,1 > reporting dynamic creation of ports: > /dev/ttySL0 --> /dev/pts/N , with N some number > Read DOCs/Smartlink.txt and Modem/DOCs/YourSystem.txt for follow > through guidance. > > and another with slamr + ungrab-winmodem. Try this one first and report back. > > Regards, > > Antonio > > On 1/3/09, Cruising Eagle <yemejemeria@xxxxxxxxx> wrote: >> >> >> >> >
