Jose, the no dialtone issue has to do with other things. If you pick up the phone, do you hear dialtone, if you do, then proceed to change the init parameters in wvdial.conf From Init2 = ATQ0 V1 E1 S0=0 &C1 &D2 +FCLASS=0 to Init2 = ATQ0 V1 E1 S0=0 X3 &C1 &D2 +MS=34 or Init2 = ATQ0 V1 E1 S0=0 X3 &C1 &D2 +MS=90 Try that and report back. Regards, Antonio On 1/1/09, jose <mifargo@xxxxxxxx> wrote: > I am using a laptop toshiba amiloxi1526 running Fedora 10. The modem in > the HDA Intel card works perfectly in windows XP and Vista reported as > Motorola sm56. However under GNULinux (either Ubuntu 8.10 or Fedora > 10)does not. The results after slmodemd are as follows : > > [root@localhost jose]# slmodemd -c SPAIN --alsa hw:0,6 > SmartLink Soft Modem: version 2.9.11 Dec 16 2008 22:54:51 > symbolic link `/dev/ttySL0' -> `/dev/pts/1' created. > modem `hw:0,6' created. TTY is `/dev/pts/1' > Use `/dev/ttySL0' as modem device, Ctrl+C for termination. > > [root@localhost jose]# wvdial > --> WvDial: Internet dialer version 1.60 > --> Cannot get information for serial port. > --> Initializing modem. > --> Sending: ATZ > ATZ > OK > --> Sending: ATQ0 V1 E1 S0=0 &C1 &D2 +FCLASS=0 > ATQ0 V1 E1 S0=0 &C1 &D2 +FCLASS=0 > OK > --> Modem initialized. > --> Sending: ATDT932345000 > --> Waiting for carrier. > ATDT932345000 > NO DIALTONE > --> No dial tone. > --> Disconnecting at Thu Jan 1 17:33:35 2009 > > The file /etc/wvdial.conf is : > > [Dialer Defaults] > Init2 = ATQ0 V1 E1 S0=0 &C1 &D2 +FCLASS=0 > Modem Type = Analog Modem > Phone = xxxxxxxxx > ISDN = 0 > Username = jose > Init1 = ATZ > Password = xxxx > Modem = /dev/ttySL0 > Baud = 460800 > Carrier Check = no > Stupid Mode = yes > > According to file bootup.txt of scanModem I tried options like running > unloading or add to /grub/menu.lst pci=routeirq or pollirq without > results. > > ModemData.txt generated by scanModem is attached > > > Regards >
