CPU0 CPU1
0: 712 24589 IO-APIC-edge timer
1: 5 820 IO-APIC-edge i8042
7: 1 0 IO-APIC-edge
8: 0 56 IO-APIC-edge rtc0
9: 1 1658 IO-APIC-fasteoi acpi
11: 0 3 IO-APIC-fasteoi ohci1394, mmc0
12: 7 1462 IO-APIC-edge i8042
14: 46 3625 IO-APIC-edge pata_amd
15: 0 0 IO-APIC-edge pata_amd
20: 15 1676 IO-APIC-fasteoi ehci_hcd:usb4
21: 8 1537 IO-APIC-fasteoi ehci_hcd:usb3, HDA Intel
22: 0 0 IO-APIC-fasteoi ohci_hcd:usb2
23: 29 15524 IO-APIC-fasteoi ohci_hcd:usb1
221: 128 34128 PCI-MSI-edge eth0
222: 45 13191 PCI-MSI-edge ahci
NMI: 0 0 Non-maskable interrupts
LOC: 28438 15220 Local timer interrupts
RES: 43532 33133 Rescheduling interrupts
CAL: 5355 5929 function call interrupts
TLB: 1904 728 TLB shootdowns
SPU: 0 0 Spurious interrupts
ERR: 1
MIS: 0
[ 0.000000] Initializing cgroup subsys cpuset
[ 0.000000] Initializing cgroup subsys cpu
[ 0.000000] Linux version 2.6.27-7-generic (buildd@rothera) (gcc version 4.3.2 (Ubuntu 4.3.2-1ubuntu10) ) #1 SMP Fri Oct 24 06:42:44 UTC 2008 (Ubuntu 2.6.27-7.14-generic)
[ 0.000000] BIOS-provided physical RAM map:
[ 0.000000] BIOS-e820: 0000000000000000 - 000000000009e000 (usable)
[ 0.000000] BIOS-e820: 000000000009e000 - 00000000000a0000 (reserved)
[ 0.000000] BIOS-e820: 00000000000d2000 - 0000000000100000 (reserved)
[ 0.000000] BIOS-e820: 0000000000100000 - 00000000aff50000 (usable)
[ 0.000000] BIOS-e820: 00000000aff50000 - 00000000aff65000 (ACPI data)
[ 0.000000] BIOS-e820: 00000000aff65000 - 00000000aff66000 (ACPI NVS)
[ 0.000000] BIOS-e820: 00000000aff66000 - 00000000c0000000 (reserved)
[ 0.000000] BIOS-e820: 00000000e0000000 - 00000000f0000000 (reserved)
[ 0.000000] BIOS-e820: 00000000fec00000 - 00000000fec10000 (reserved)
[ 0.000000] BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved)
[ 0.000000] BIOS-e820: 00000000fff80000 - 0000000100000000 (reserved)
[ 0.000000] last_pfn = 0xaff50 max_arch_pfn = 0x100000
[ 0.000000] kernel direct mapping tables up to 38000000 @ 7000-c000
[ 0.000000] RAMDISK: 7f7e7000 - 7ffefd34
[ 0.000000] Allocated new RAMDISK: 005c4000 - 00dccd34
[ 0.000000] Move RAMDISK from 000000007f7e7000 - 000000007ffefd33 to 005c4000 - 00dccd33
[ 0.000000] DMI present.
[ 0.000000] ACPI: RSDP 000F7CA0, 0024 (r2 ACRSYS)
[ 0.000000] ACPI: XSDT AFF5E30F, 005C (r1 ACRSYS ACRPRDCT 6040000 LTP 0)
[ 0.000000] ACPI: SLIC AFF64A8C, 0176 (r1 ACRSYS ACRPRDCT 6040000 LOHR 0)
[ 0.000000] ACPI: FACP AFF64C02, 00F4 (r3 NVIDIA MCP67-M 6040000 PTL_ F4240)
[ 0.000000] ACPI: DSDT AFF5E36B, 66AD (r1 NVIDIA MCP67 6040000 MSFT 3000000)
[ 0.000000] ACPI: FACS AFF65FC0, 0040
[ 0.000000] ACPI: SSDT AFF64CF6, 0206 (r1 PTLTD POWERNOW 6040000 LTP 1)
[ 0.000000] ACPI: MCFG AFF64EFC, 003C (r1 Nvidia NVDAACPI 6040000 NVDA 0)
[ 0.000000] ACPI: HPET AFF64F38, 0038 (r1 PTLTD HPETTBL 6040000 LTP 1)
[ 0.000000] ACPI: APIC AFF64F70, 0068 (r1 PTLTD APIC 6040000 LTP 0)
[ 0.000000] ACPI: BOOT AFF64FD8, 0028 (r1 PTLTD $SBFTBL$ 6040000 LTP 1)
[ 0.000000] ACPI: DMI detected: Acer
[ 0.000000] 1919MB HIGHMEM available.
[ 0.000000] 896MB LOWMEM available.
[ 0.000000] mapped low ram: 0 - 38000000
[ 0.000000] low ram: 00000000 - 38000000
[ 0.000000] bootmap 00008000 - 0000f000
[ 0.000000] (9 early reservations) ==> bootmem [0000000000 - 0038000000]
[ 0.000000] #0 [0000000000 - 0000001000] BIOS data page ==> [0000000000 - 0000001000]
[ 0.000000] #1 [0000001000 - 0000002000] EX TRAMPOLINE ==> [0000001000 - 0000002000]
[ 0.000000] #2 [0000006000 - 0000007000] TRAMPOLINE ==> [0000006000 - 0000007000]
[ 0.000000] #3 [0000100000 - 00005c0a20] TEXT DATA BSS ==> [0000100000 - 00005c0a20]
[ 0.000000] #4 [00005c1000 - 00005c4000] INIT_PG_TABLE ==> [00005c1000 - 00005c4000]
[ 0.000000] #5 [000009e000 - 0000100000] BIOS reserved ==> [000009e000 - 0000100000]
[ 0.000000] #6 [0000007000 - 0000008000] PGTABLE ==> [0000007000 - 0000008000]
[ 0.000000] #7 [00005c4000 - 0000dccd34] NEW RAMDISK ==> [00005c4000 - 0000dccd34]
[ 0.000000] #8 [0000008000 - 000000f000] BOOTMAP ==> [0000008000 - 000000f000]
[ 0.000000] found SMP MP-table at [c00f7c90] 000f7c90
[ 0.000000] Zone PFN ranges:
[ 0.000000] DMA 0x00000000 -> 0x00001000
[ 0.000000] Normal 0x00001000 -> 0x00038000
[ 0.000000] HighMem 0x00038000 -> 0x000aff50
[ 0.000000] Movable zone start PFN for each node
[ 0.000000] early_node_map[2] active PFN ranges
[ 0.000000] 0: 0x00000000 -> 0x0000009e
[ 0.000000] 0: 0x00000100 -> 0x000aff50
[ 0.000000] On node 0 totalpages: 720622
[ 0.000000] free_area_init_node: node 0, pgdat c048a500, node_mem_map c1000000
[ 0.000000] DMA zone: 3962 pages, LIFO batch:0
[ 0.000000] Normal zone: 223300 pages, LIFO batch:31
[ 0.000000] HighMem zone: 487025 pages, LIFO batch:31
[ 0.000000] Detected use of extended apic ids on hypertransport bus
[ 0.000000] ACPI: PM-Timer IO Port: 0x1008
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] enabled)
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1])
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1])
[ 0.000000] ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0])
[ 0.000000] IOAPIC[0]: apic_id 2, version 17, address 0xfec00000, GSI 0-23
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 low level)
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[ 0.000000] ACPI: IRQ0 used by override.
[ 0.000000] ACPI: IRQ2 used by override.
[ 0.000000] ACPI: IRQ9 used by override.
[ 0.000000] Enabling APIC mode: Flat. Using 1 I/O APICs
[ 0.000000] ACPI: HPET id: 0x10de8201 base: 0xfed00000
[ 0.000000] Using ACPI (MADT) for SMP configuration information
[ 0.000000] SMP: Allowing 2 CPUs, 0 hotplug CPUs
[ 0.000000] mapped APIC to ffffb000 (fee00000)
[ 0.000000] mapped IOAPIC to ffffa000 (fec00000)
[ 0.000000] PM: Registered nosave memory: 000000000009e000 - 00000000000a0000
[ 0.000000] PM: Registered nosave memory: 00000000000a0000 - 00000000000d2000
[ 0.000000] PM: Registered nosave memory: 00000000000d2000 - 0000000000100000
[ 0.000000] Allocating PCI resources starting at c2000000 (gap: c0000000:20000000)
[ 0.000000] PERCPU: Allocating 41628 bytes of per cpu data
[ 0.000000] NR_CPUS: 64, nr_cpu_ids: 2, nr_node_ids 1
[ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 714287
[ 0.000000] Kernel command line: root=UUID=66BA9E4ABA9E1721 loop=/ubuntu/disks/root.disk ro ROOTFLAGS=syncio quiet splash
[ 0.000000] Enabling fast FPU save and restore... done.
[ 0.000000] Enabling unmasked SIMD FPU exception support... done.
[ 0.000000] Initializing CPU#0
[ 0.000000] PID hash table entries: 4096 (order: 12, 16384 bytes)
[ 0.000000] Extended CMOS year: 2000
[ 0.000000] TSC: PIT calibration confirmed by PMTIMER.
[ 0.000000] TSC: using PIT calibration value
[ 0.000000] Detected 2000.216 MHz processor.
[ 0.004000] spurious 8259A interrupt: IRQ7.
[ 0.004000] Console: colour VGA+ 80x25
[ 0.004000] console [tty0] enabled
[ 0.004000] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
[ 0.004000] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
[ 0.004000] Memory: 2842128k/2882880k available (2572k kernel code, 39400k reserved, 1160k data, 424k init, 1965376k highmem)
[ 0.004000] virtual kernel memory layout:
[ 0.004000] fixmap : 0xffc77000 - 0xfffff000 (3616 kB)
[ 0.004000] pkmap : 0xff400000 - 0xff800000 (4096 kB)
[ 0.004000] vmalloc : 0xf8800000 - 0xff3fe000 ( 107 MB)
[ 0.004000] lowmem : 0xc0000000 - 0xf8000000 ( 896 MB)
[ 0.004000] .init : 0xc04ab000 - 0xc0515000 ( 424 kB)
[ 0.004000] .data : 0xc038329a - 0xc04a5680 (1160 kB)
[ 0.004000] .text : 0xc0100000 - 0xc038329a (2572 kB)
[ 0.004000] Checking if this processor honours the WP bit even in supervisor mode...Ok.
[ 0.004000] CPA: page pool initialized 1 of 1 pages preallocated
[ 0.004000] SLUB: Genslabs=12, HWalign=64, Order=0-3, MinObjects=0, CPUs=2, Nodes=1
[ 0.004000] hpet clockevent registered
[ 0.004000] Calibrating delay loop (skipped), value calculated using timer frequency.. 4000.43 BogoMIPS (lpj=8000864)
[ 0.004000] Security Framework initialized
[ 0.004000] SELinux: Disabled at boot.
[ 0.004000] AppArmor: AppArmor initialized
[ 0.004000] Mount-cache hash table entries: 512
[ 0.004000] Initializing cgroup subsys ns
[ 0.004000] Initializing cgroup subsys cpuacct
[ 0.004000] Initializing cgroup subsys memory
[ 0.004000] CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line)
[ 0.004000] CPU: L2 Cache: 512K (64 bytes/line)
[ 0.004000] CPU 0(2) -> Core 0
[ 0.004000] using C1E aware idle routine
[ 0.004000] Checking 'hlt' instruction... OK.
[ 0.017620] ACPI: Core revision 20080609
[ 0.019829] ACPI: Checking initramfs for custom DSDT
[ 0.376314] ENABLING IO-APIC IRQs
[ 0.376544] ..TIMER: vector=0x31 apic1=0 pin1=2 apic2=-1 pin2=-1
[ 0.417216] CPU0: AMD Turion(tm) 64 X2 Mobile Technology TL-60 stepping 02
[ 0.420026] Booting processor 1/1 ip 6000
[ 0.004000] Initializing CPU#1
[ 0.004000] Calibrating delay using timer specific routine.. 4000.74 BogoMIPS (lpj=8001493)
[ 0.004000] CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line)
[ 0.004000] CPU: L2 Cache: 512K (64 bytes/line)
[ 0.004000] CPU 1(2) -> Core 1
[ 0.504181] CPU1: AMD Turion(tm) 64 X2 Mobile Technology TL-60 stepping 02
[ 0.504209] Brought up 2 CPUs
[ 0.504212] Total of 2 processors activated (8001.17 BogoMIPS).
[ 0.504056] System has AMD C1E enabled
[ 0.504251] CPU0 attaching sched-domain:
[ 0.504072] Switch to broadcast mode on CPU1
[ 0.504260] domain 0: span 0-1 level CPU
[ 0.504262] groups: 0 1
[ 0.504269] CPU1 attaching sched-domain:
[ 0.504271] domain 0: span 0-1 level CPU
[ 0.504273] groups: 1 0
[ 0.504345] Switch to broadcast mode on CPU0
[ 0.504345] net_namespace: 840 bytes
[ 0.504345] Booting paravirtualized kernel on bare hardware
[ 0.504345] Time: 1:41:08 Date: 12/12/08
[ 0.504345] NET: Registered protocol family 16
[ 0.504345] EISA bus registered
[ 0.504345] ACPI: bus type pci registered
[ 0.504345] PCI: MCFG configuration 0: base e0000000 segment 0 buses 0 - 255
[ 0.504345] PCI: MCFG area at e0000000 reserved in E820
[ 0.504345] PCI: Using MMCONFIG for extended config space
[ 0.504345] PCI: Using configuration type 1 for base access
[ 0.504896] ACPI: EC: Look up EC in DSDT
[ 0.511953] ACPI: Interpreter enabled
[ 0.511956] ACPI: (supports S0 S3 S4 S5)
[ 0.511971] ACPI: Using IOAPIC for interrupt routing
[ 0.516056] ACPI: EC: non-query interrupt received, switching to interrupt mode
[ 0.616189] ACPI: EC: GPE = 0x10, I/O: command/status = 0x66, data = 0x62
[ 0.616189] ACPI: EC: driver started in interrupt mode
[ 0.616189] ACPI: PCI Root Bridge [PCI0] (0000:00)
[ 0.616189] PCI: 0000:00:01.0 reg 10 io port: [1d00, 1dff]
[ 0.616206] PCI: 0000:00:01.1 reg 10 io port: [3080, 30bf]
[ 0.616217] PCI: 0000:00:01.1 reg 20 io port: [3040, 307f]
[ 0.616222] PCI: 0000:00:01.1 reg 24 io port: [3000, 303f]
[ 0.616238] pci 0000:00:01.1: PME# supported from D3hot D3cold
[ 0.616244] pci 0000:00:01.1: PME# disabled
[ 0.616294] PCI: 0000:00:01.3 reg 10 32bit mmio: [d0500000, d057ffff]
[ 0.616369] PCI: 0000:00:02.0 reg 10 32bit mmio: [d0786000, d0786fff]
[ 0.616391] pci 0000:00:02.0: supports D1
[ 0.616393] pci 0000:00:02.0: supports D2
[ 0.616395] pci 0000:00:02.0: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.616399] pci 0000:00:02.0: PME# disabled
[ 0.616419] PCI: 0000:00:02.1 reg 10 32bit mmio: [d0789000, d07890ff]
[ 0.616445] pci 0000:00:02.1: supports D1
[ 0.616446] pci 0000:00:02.1: supports D2
[ 0.616449] pci 0000:00:02.1: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.616452] pci 0000:00:02.1: PME# disabled
[ 0.616475] PCI: 0000:00:04.0 reg 10 32bit mmio: [d0787000, d0787fff]
[ 0.616496] pci 0000:00:04.0: supports D1
[ 0.616498] pci 0000:00:04.0: supports D2
[ 0.616500] pci 0000:00:04.0: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.616504] pci 0000:00:04.0: PME# disabled
[ 0.616524] PCI: 0000:00:04.1 reg 10 32bit mmio: [d0789400, d07894ff]
[ 0.616550] pci 0000:00:04.1: supports D1
[ 0.616551] pci 0000:00:04.1: supports D2
[ 0.616554] pci 0000:00:04.1: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.616557] pci 0000:00:04.1: PME# disabled
[ 0.616588] PCI: 0000:00:06.0 reg 20 io port: [30c0, 30cf]
[ 0.616622] PCI: 0000:00:07.0 reg 10 32bit mmio: [d0780000, d0783fff]
[ 0.616647] pci 0000:00:07.0: PME# supported from D3hot D3cold
[ 0.616650] pci 0000:00:07.0: PME# disabled
[ 0.616702] PCI: 0000:00:09.0 reg 10 io port: [30f0, 30f7]
[ 0.616706] PCI: 0000:00:09.0 reg 14 io port: [30e4, 30e7]
[ 0.616710] PCI: 0000:00:09.0 reg 18 io port: [30e8, 30ef]
[ 0.616714] PCI: 0000:00:09.0 reg 1c io port: [30e0, 30e3]
[ 0.616718] PCI: 0000:00:09.0 reg 20 io port: [30d0, 30df]
[ 0.616722] PCI: 0000:00:09.0 reg 24 32bit mmio: [d0784000, d0785fff]
[ 0.616762] PCI: 0000:00:0a.0 reg 10 32bit mmio: [d0788000, d0788fff]
[ 0.616767] PCI: 0000:00:0a.0 reg 14 io port: [30f8, 30ff]
[ 0.616771] PCI: 0000:00:0a.0 reg 18 32bit mmio: [d0789c00, d0789cff]
[ 0.616775] PCI: 0000:00:0a.0 reg 1c 32bit mmio: [d0789800, d078980f]
[ 0.616793] pci 0000:00:0a.0: supports D1
[ 0.616795] pci 0000:00:0a.0: supports D2
[ 0.616797] pci 0000:00:0a.0: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.616802] pci 0000:00:0a.0: PME# disabled
[ 0.616830] pci 0000:00:0c.0: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.616833] pci 0000:00:0c.0: PME# disabled
[ 0.616852] PCI: 0000:00:12.0 reg 10 32bit mmio: [d2000000, d2ffffff]
[ 0.616856] PCI: 0000:00:12.0 reg 14 32bit mmio: [c0000000, cfffffff]
[ 0.616863] PCI: 0000:00:12.0 reg 1c 64bit mmio: [d1000000, d1ffffff]
[ 0.616869] PCI: 0000:00:12.0 reg 30 32bit mmio: [0, 1ffff]
[ 0.616973] PCI: 0000:01:04.0 reg 10 32bit mmio: [d0400000, d04007ff]
[ 0.617004] pci 0000:01:04.0: PME# supported from D0 D3hot D3cold
[ 0.617007] pci 0000:01:04.0: PME# disabled
[ 0.617028] PCI: 0000:01:04.1 reg 10 32bit mmio: [d0400800, d04008ff]
[ 0.617059] pci 0000:01:04.1: supports D1
[ 0.617061] pci 0000:01:04.1: supports D2
[ 0.617063] pci 0000:01:04.1: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.617067] pci 0000:01:04.1: PME# disabled
[ 0.617088] PCI: 0000:01:04.2 reg 10 32bit mmio: [d0400c00, d0400cff]
[ 0.617118] pci 0000:01:04.2: supports D1
[ 0.617120] pci 0000:01:04.2: supports D2
[ 0.617122] pci 0000:01:04.2: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.617126] pci 0000:01:04.2: PME# disabled
[ 0.617147] PCI: 0000:01:04.3 reg 10 32bit mmio: [d0401000, d04010ff]
[ 0.617178] pci 0000:01:04.3: supports D1
[ 0.617179] pci 0000:01:04.3: supports D2
[ 0.617181] pci 0000:01:04.3: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.617185] pci 0000:01:04.3: PME# disabled
[ 0.617206] PCI: 0000:01:04.4 reg 10 32bit mmio: [d0401400, d04014ff]
[ 0.617237] pci 0000:01:04.4: supports D1
[ 0.617239] pci 0000:01:04.4: supports D2
[ 0.617241] pci 0000:01:04.4: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.617245] pci 0000:01:04.4: PME# disabled
[ 0.617276] pci 0000:00:08.0: transparent bridge
[ 0.617280] PCI: bridge 0000:00:08.0 32bit mmio: [d0400000, d04fffff]
[ 0.617319] PCI: bridge 0000:00:0c.0 io port: [4000, 4fff]
[ 0.617322] PCI: bridge 0000:00:0c.0 32bit mmio: [d0200000, d03fffff]
[ 0.617327] PCI: bridge 0000:00:0c.0 64bit mmio pref: [d0000000, d01fffff]
[ 0.617333] bus 00 -> node 0
[ 0.617339] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
[ 0.617452] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P2P0._PRT]
[ 0.617477] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.XVR1._PRT]
[ 0.656299] ACPI: PCI Interrupt Link [LNK1] (IRQs 5 7 11) *10
[ 0.656567] ACPI: PCI Interrupt Link [LNK2] (IRQs 5 7 *11)
[ 0.656831] ACPI: PCI Interrupt Link [LNK3] (IRQs 5 7 11) *0, disabled.
[ 0.657104] ACPI: PCI Interrupt Link [LNK4] (IRQs 5 7 11) *0, disabled.
[ 0.657369] ACPI: PCI Interrupt Link [LK1E] (IRQs 16) *0, disabled.
[ 0.657632] ACPI: PCI Interrupt Link [LK2E] (IRQs 17) *0, disabled.
[ 0.657896] ACPI: PCI Interrupt Link [LK3E] (IRQs 18) *0, disabled.
[ 0.658159] ACPI: PCI Interrupt Link [LK4E] (IRQs 19) *0, disabled.
[ 0.658422] ACPI: PCI Interrupt Link [LSMB] (IRQs 20 21 22 23) *10
[ 0.658687] ACPI: PCI Interrupt Link [LUS0] (IRQs 20 21 22 23) *11
[ 0.658952] ACPI: PCI Interrupt Link [LUS2] (IRQs 20 21 22 23) *7
[ 0.659222] ACPI: PCI Interrupt Link [LMAC] (IRQs 20 21 22 23) *11
[ 0.659360] ACPI: PCI Interrupt Link [LAZA] (IRQs 20 21 22 23) *10
[ 0.659360] ACPI: PCI Interrupt Link [LGPU] (IRQs 17) *10
[ 0.659360] ACPI: PCI Interrupt Link [LPID] (IRQs 20 21 22 23) *0, disabled.
[ 0.659360] ACPI: PCI Interrupt Link [LSI0] (IRQs 20 21 22 23) *5
[ 0.659360] ACPI: PCI Interrupt Link [Z00N] (IRQs 20 21 22 23) *10
[ 0.659360] ACPI: PCI Interrupt Link [Z00O] (IRQs 20 21 22 23) *11
[ 0.659360] ACPI: PCI Interrupt Link [LPMU] (IRQs 18) *11
[ 0.660136] Linux Plug and Play Support v0.97 (c) Adam Belay
[ 0.660159] pnp: PnP ACPI init
[ 0.660159] ACPI: bus type pnp registered
[ 0.705332] pnp: PnP ACPI: found 13 devices
[ 0.705332] ACPI: ACPI bus type pnp unregistered
[ 0.705332] PnPBIOS: Disabled by ACPI PNP
[ 0.705332] PCI: Using ACPI for IRQ routing
[ 0.708044] NET: Registered protocol family 8
[ 0.708047] NET: Registered protocol family 20
[ 0.712040] NetLabel: Initializing
[ 0.712040] NetLabel: domain hash size = 128
[ 0.712040] NetLabel: protocols = UNLABELED CIPSOv4
[ 0.712055] NetLabel: unlabeled traffic allowed by default
[ 0.712063] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 31
[ 0.712069] hpet0: 3 32-bit timers, 25000000 Hz
[ 0.713683] tracer: 772 pages allocated for 65536 entries of 48 bytes
[ 0.713686] actual entries 65620
[ 0.713833] AppArmor: AppArmor Filesystem Enabled
[ 0.713861] ACPI: RTC can wake from S4
[ 0.716052] Switched to high resolution mode on CPU 0
[ 0.716065] Switched to high resolution mode on CPU 1
[ 0.716096] system 00:01: ioport range 0x360-0x361 has been reserved
[ 0.716099] system 00:01: ioport range 0x4d0-0x4d1 has been reserved
[ 0.716110] system 00:07: iomem range 0xe0000000-0xefffffff could not be reserved
[ 0.716118] system 00:0a: ioport range 0x1000-0x107f has been reserved
[ 0.716121] system 00:0a: ioport range 0x1080-0x10ff has been reserved
[ 0.716124] system 00:0a: ioport range 0x1400-0x147f has been reserved
[ 0.716127] system 00:0a: ioport range 0x1480-0x14ff has been reserved
[ 0.716130] system 00:0a: ioport range 0x1800-0x187f has been reserved
[ 0.716133] system 00:0a: ioport range 0x1880-0x18ff has been reserved
[ 0.716140] system 00:0c: iomem range 0xffc00000-0xffffffff could not be reserved
[ 0.716144] system 00:0c: iomem range 0xfec00000-0xfec00fff could not be reserved
[ 0.716147] system 00:0c: iomem range 0xfee00000-0xfeefffff could not be reserved
[ 0.716151] system 00:0c: iomem range 0xfed00000-0xfed00fff has been reserved
[ 0.716154] system 00:0c: iomem range 0xfef00000-0xfef00fff has been reserved
[ 0.751484] pci 0000:00:08.0: PCI bridge, secondary bus 0000:01
[ 0.751487] pci 0000:00:08.0: IO window: disabled
[ 0.751492] pci 0000:00:08.0: MEM window: 0xd0400000-0xd04fffff
[ 0.751495] pci 0000:00:08.0: PREFETCH window: disabled
[ 0.751499] pci 0000:00:0c.0: PCI bridge, secondary bus 0000:03
[ 0.751502] pci 0000:00:0c.0: IO window: 0x4000-0x4fff
[ 0.751506] pci 0000:00:0c.0: MEM window: 0xd0200000-0xd03fffff
[ 0.751509] pci 0000:00:0c.0: PREFETCH window: 0x000000d0000000-0x000000d01fffff
[ 0.751520] pci 0000:00:08.0: setting latency timer to 64
[ 0.751525] pci 0000:00:0c.0: setting latency timer to 64
[ 0.751529] bus: 00 index 0 io port: [0, ffff]
[ 0.751531] bus: 00 index 1 mmio: [0, ffffffff]
[ 0.751534] bus: 01 index 0 mmio: [0, 0]
[ 0.751536] bus: 01 index 1 mmio: [d0400000, d04fffff]
[ 0.751538] bus: 01 index 2 mmio: [0, 0]
[ 0.751540] bus: 01 index 3 io port: [0, ffff]
[ 0.751542] bus: 01 index 4 mmio: [0, ffffffff]
[ 0.751545] bus: 03 index 0 io port: [4000, 4fff]
[ 0.751547] bus: 03 index 1 mmio: [d0200000, d03fffff]
[ 0.751549] bus: 03 index 2 mmio: [d0000000, d01fffff]
[ 0.751552] bus: 03 index 3 mmio: [0, 0]
[ 0.751564] NET: Registered protocol family 2
[ 0.761074] IP route cache hash table entries: 32768 (order: 5, 131072 bytes)
[ 0.761383] TCP established hash table entries: 131072 (order: 8, 1048576 bytes)
[ 0.762157] TCP bind hash table entries: 65536 (order: 7, 524288 bytes)
[ 0.762557] TCP: Hash tables configured (established 131072 bind 65536)
[ 0.762561] TCP reno registered
[ 0.765111] NET: Registered protocol family 1
[ 0.765248] checking if image is initramfs... it is
[ 1.492802] Freeing initrd memory: 8227k freed
[ 1.492981] Simple Boot Flag at 0x36 set to 0x1
[ 1.494391] audit: initializing netlink socket (disabled)
[ 1.494406] type=2000 audit(1229046067.492:1): initialized
[ 1.500476] highmem bounce pool size: 64 pages
[ 1.500482] HugeTLB registered 4 MB page size, pre-allocated 0 pages
[ 1.503484] VFS: Disk quotas dquot_6.5.1
[ 1.503590] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
[ 1.503704] msgmni has been set to 1730
[ 1.503836] io scheduler noop registered
[ 1.503839] io scheduler anticipatory registered
[ 1.503841] io scheduler deadline registered
[ 1.503854] io scheduler cfq registered (default)
[ 1.503886] pci 0000:00:00.0: Enabling HT MSI Mapping
[ 1.504070] pci 0000:00:07.0: Enabling HT MSI Mapping
[ 1.504085] pci 0000:00:08.0: Enabling HT MSI Mapping
[ 1.504102] pci 0000:00:09.0: Enabling HT MSI Mapping
[ 1.504119] pci 0000:00:0a.0: Enabling HT MSI Mapping
[ 1.504135] pci 0000:00:0c.0: Enabling HT MSI Mapping
[ 1.504150] pci 0000:00:12.0: Boot video device
[ 1.504288] pcieport-driver 0000:00:0c.0: setting latency timer to 64
[ 1.504314] pcieport-driver 0000:00:0c.0: found MSI capability
[ 1.504338] pci_express 0000:00:0c.0:pcie00: allocate port service
[ 1.504400] pci_express 0000:00:0c.0:pcie03: allocate port service
[ 1.504807] isapnp: Scanning for PnP cards...
[ 1.857408] isapnp: No Plug & Play device found
[ 1.902029] hpet_resources: 0xfed00000 is busy
[ 1.902126] Serial: 8250/16550 driver4 ports, IRQ sharing enabled
[ 1.904859] brd: module loaded
[ 1.904934] input: Macintosh mouse button emulation as /devices/virtual/input/input0
[ 1.905095] PNP: PS/2 Controller [PNP0303:KBC0,PNP0f13:MSE0] at 0x60,0x64 irq 1,12
[ 1.945641] serio: i8042 KBD port at 0x60,0x64 irq 1
[ 1.945649] serio: i8042 AUX port at 0x60,0x64 irq 12
[ 1.946051] mice: PS/2 mouse device common for all mice
[ 1.946216] rtc_cmos 00:04: rtc core: registered rtc_cmos as rtc0
[ 1.946254] rtc0: alarms up to one year, y3k, hpet irqs
[ 1.946399] EISA: Probing bus 0 at eisa.0
[ 1.946405] Cannot allocate resource for EISA slot 1
[ 1.946411] Cannot allocate resource for EISA slot 3
[ 1.946413] Cannot allocate resource for EISA slot 4
[ 1.946425] EISA: Detected 0 cards.
[ 1.946429] cpuidle: using governor ladder
[ 1.946432] cpuidle: using governor menu
[ 1.946935] TCP cubic registered
[ 1.946962] Using IPI No-Shortcut mode
[ 1.947178] registered taskstats version 1
[ 1.947334] Magic number: 4:174:660
[ 1.947339] block ram13: hash matches
[ 1.947406] tty ptyeb: hash matches
[ 1.947652] rtc_cmos 00:04: setting system clock to 2008-12-12 01:41:09 UTC (1229046069)
[ 1.947656] BIOS EDD facility v0.16 2004-Jun-25, 0 devices found
[ 1.947658] EDD information not available.
[ 1.947970] Freeing unused kernel memory: 424k freed
[ 1.948047] Write protecting the kernel text: 2576k
[ 1.948088] Write protecting the kernel read-only data: 936k
[ 1.975538] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input1
[ 2.129217] fuse init (API version 7.9)
[ 2.211163] ACPI: processor limited to max C-state 1
[ 2.211357] ACPI: CPU0 (power states: C1[C1] C2[C2] C3[C3])
[ 2.211433] processor ACPI0007:00: registered as cooling_device0
[ 2.211438] ACPI: Processor [CPU0] (supports 8 throttling states)
[ 2.211530] processor ACPI0007:01: registered as cooling_device1
[ 2.290153] thermal LNXTHERM:01: registered as thermal_zone0
[ 2.361194] ACPI: Thermal Zone [THRM] (57 C)
[ 2.767268] usbcore: registered new interface driver usbfs
[ 2.767295] usbcore: registered new interface driver hub
[ 2.770484] usbcore: registered new device driver usb
[ 2.789186] ohci_hcd: 2006 August 04 USB 1.1 'Open' Host Controller (OHCI) Driver
[ 2.789665] ACPI: PCI Interrupt Link [LUS0] enabled at IRQ 23
[ 2.789677] ohci_hcd 0000:00:02.0: PCI INT A -> Link[LUS0] -> GSI 23 (level, low) -> IRQ 23
[ 2.789690] ohci_hcd 0000:00:02.0: setting latency timer to 64
[ 2.789693] ohci_hcd 0000:00:02.0: OHCI Host Controller
[ 2.789742] ohci_hcd 0000:00:02.0: new USB bus registered, assigned bus number 1
[ 2.789767] ohci_hcd 0000:00:02.0: irq 23, io mem 0xd0786000
[ 2.802014] No dock devices found.
[ 2.816804] SCSI subsystem initialized
[ 2.847168] usb usb1: configuration #1 chosen from 1 choice
[ 2.847203] hub 1-0:1.0: USB hub found
[ 2.847218] hub 1-0:1.0: 6 ports detected
[ 2.863778] libata version 3.00 loaded.
[ 3.053859] ACPI: PCI Interrupt Link [Z00N] enabled at IRQ 22
[ 3.053874] ohci_hcd 0000:00:04.0: PCI INT A -> Link[Z00N] -> GSI 22 (level, low) -> IRQ 22
[ 3.053890] ohci_hcd 0000:00:04.0: setting latency timer to 64
[ 3.053894] ohci_hcd 0000:00:04.0: OHCI Host Controller
[ 3.053939] ohci_hcd 0000:00:04.0: new USB bus registered, assigned bus number 2
[ 3.053965] ohci_hcd 0000:00:04.0: irq 22, io mem 0xd0787000
[ 3.110184] usb usb2: configuration #1 chosen from 1 choice
[ 3.110215] hub 2-0:1.0: USB hub found
[ 3.110227] hub 2-0:1.0: 6 ports detected
[ 3.212956] ACPI: PCI Interrupt Link [LUS2] enabled at IRQ 21
[ 3.212969] ehci_hcd 0000:00:02.1: PCI INT B -> Link[LUS2] -> GSI 21 (level, low) -> IRQ 21
[ 3.212984] ehci_hcd 0000:00:02.1: setting latency timer to 64
[ 3.212987] ehci_hcd 0000:00:02.1: EHCI Host Controller
[ 3.213015] ehci_hcd 0000:00:02.1: new USB bus registered, assigned bus number 3
[ 3.213045] ehci_hcd 0000:00:02.1: debug port 1
[ 3.213050] ehci_hcd 0000:00:02.1: cache line size of 64 is not supported
[ 3.213070] ehci_hcd 0000:00:02.1: irq 21, io mem 0xd0789000
[ 3.228093] usb 1-3: new full speed USB device using ohci_hcd and address 2
[ 3.376701] ehci_hcd 0000:00:02.1: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004
[ 3.376865] usb usb3: configuration #1 chosen from 1 choice
[ 3.376895] hub 3-0:1.0: USB hub found
[ 3.376906] hub 3-0:1.0: 6 ports detected
[ 3.432042] hub 1-0:1.0: unable to enumerate USB device on port 3
[ 3.601703] ACPI: PCI Interrupt Link [Z00O] enabled at IRQ 20
[ 3.601716] ehci_hcd 0000:00:04.1: PCI INT B -> Link[Z00O] -> GSI 20 (level, low) -> IRQ 20
[ 3.601730] ehci_hcd 0000:00:04.1: setting latency timer to 64
[ 3.601734] ehci_hcd 0000:00:04.1: EHCI Host Controller
[ 3.601760] ehci_hcd 0000:00:04.1: new USB bus registered, assigned bus number 4
[ 3.601788] ehci_hcd 0000:00:04.1: debug port 1
[ 3.601792] ehci_hcd 0000:00:04.1: cache line size of 64 is not supported
[ 3.601811] ehci_hcd 0000:00:04.1: irq 20, io mem 0xd0789400
[ 3.624038] ehci_hcd 0000:00:04.1: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004
[ 3.624171] usb usb4: configuration #1 chosen from 1 choice
[ 3.624198] hub 4-0:1.0: USB hub found
[ 3.624208] hub 4-0:1.0: 6 ports detected
[ 3.744922] pata_acpi 0000:00:06.0: setting latency timer to 64
[ 3.744956] pata_amd 0000:00:06.0: version 0.3.10
[ 3.744976] pata_amd 0000:00:06.0: setting latency timer to 64
[ 3.745377] scsi0 : pata_amd
[ 3.745751] scsi1 : pata_amd
[ 3.746249] ata1: PATA max UDMA/133 cmd 0x1f0 ctl 0x3f6 bmdma 0x30c0 irq 14
[ 3.746252] ata2: PATA max UDMA/133 cmd 0x170 ctl 0x376 bmdma 0x30c8 irq 15
[ 3.801034] usb 3-3: new high speed USB device using ehci_hcd and address 2
[ 3.908311] ata1.00: ATAPI: PIONEER DVD-RW DVRKD08RS, 1.02, max UDMA/33
[ 3.908325] ata1: nv_mode_filter: 0x739f&0x701f->0x701f, BIOS=0x7000 (0xc000c700) ACPI=0x701f (60:600:0x13)
[ 3.924325] ata1.00: configured for UDMA/33
[ 3.924364] ata2: port disabled. ignoring.
[ 3.930839] scsi 0:0:0:0: CD-ROM PIONEER DVD-RW DVRKD08RS 1.02 PQ: 0 ANSI: 5
[ 3.931481] ACPI: PCI Interrupt Link [LSI0] enabled at IRQ 23
[ 3.931487] pata_acpi 0000:00:09.0: PCI INT A -> Link[LSI0] -> GSI 23 (level, low) -> IRQ 23
[ 3.931521] pata_acpi 0000:00:09.0: setting latency timer to 64
[ 3.931532] pata_acpi 0000:00:09.0: PCI INT A disabled
[ 3.931606] forcedeth: Reverse Engineered nForce ethernet driver. Version 0.61.
[ 3.932029] ACPI: PCI Interrupt Link [LMAC] enabled at IRQ 22
[ 3.932033] forcedeth 0000:00:0a.0: PCI INT A -> Link[LMAC] -> GSI 22 (level, low) -> IRQ 22
[ 3.932038] forcedeth 0000:00:0a.0: setting latency timer to 64
[ 3.972470] usb 3-3: configuration #1 chosen from 1 choice
[ 4.600644] forcedeth 0000:00:0a.0: ifname eth0, PHY OUI 0x732 @ 1, addr 00:1b:38:e3:eb:7e
[ 4.600649] forcedeth 0000:00:0a.0: highdma pwrctl mgmt timirq gbit lnktim msi desc-v3
[ 4.608428] ACPI: PCI Interrupt Link [LNK1] enabled at IRQ 11
[ 4.608443] ohci1394 0000:01:04.0: PCI INT A -> Link[LNK1] -> GSI 11 (level, low) -> IRQ 11
[ 4.660182] ohci1394: fw-host0: OHCI-1394 1.0 (PCI): IRQ=[11] MMIO=[d0400000-d04007ff] Max Packet=[2048] IR/IT contexts=[4/4]
[ 4.665222] ahci 0000:00:09.0: version 3.0
[ 4.665240] ahci 0000:00:09.0: PCI INT A -> Link[LSI0] -> GSI 23 (level, low) -> IRQ 23
[ 4.665338] ahci 0000:00:09.0: AHCI 0001.0100 32 slots 4 ports 3 Gbps 0xf impl IDE mode
[ 4.665342] ahci 0000:00:09.0: flags: 64bit sntf led clo pmp pio slum part
[ 4.665346] ahci 0000:00:09.0: setting latency timer to 64
[ 4.665732] scsi2 : ahci
[ 4.665863] scsi3 : ahci
[ 4.670299] scsi4 : ahci
[ 4.670420] scsi5 : ahci
[ 4.670526] ata3: SATA max UDMA/133 abar m8192@0xd0784000 port 0xd0784100 irq 222
[ 4.670530] ata4: SATA max UDMA/133 abar m8192@0xd0784000 port 0xd0784180 irq 222
[ 4.670533] ata5: SATA max UDMA/133 abar m8192@0xd0784000 port 0xd0784200 irq 222
[ 4.670536] ata6: SATA max UDMA/133 abar m8192@0xd0784000 port 0xd0784280 irq 222
[ 5.152040] ata3: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[ 5.201481] ata3.00: ATA-8: WDC WD3200BEVT-22ZCT0, 11.01A11, max UDMA/133
[ 5.201485] ata3.00: 625142448 sectors, multi 16: LBA48 NCQ (depth 0/32)
[ 5.202343] ata3.00: configured for UDMA/133
[ 5.520031] ata4: SATA link down (SStatus 0 SControl 300)
[ 5.840030] ata5: SATA link down (SStatus 0 SControl 300)
[ 5.957771] ieee1394: Host added: ID:BUS[0-00:1023] GUID[00023f84ba4054d9]
[ 6.160036] ata6: SATA link down (SStatus 0 SControl 300)
[ 6.160164] scsi 2:0:0:0: Direct-Access ATA WDC WD3200BEVT-2 11.0 PQ: 0 ANSI: 5
[ 6.172783] scsi 0:0:0:0: Attached scsi generic sg0 type 5
[ 6.172826] scsi 2:0:0:0: Attached scsi generic sg1 type 0
[ 6.192817] Driver 'sd' needs updating - please use bus_type methods
[ 6.192959] sd 2:0:0:0: [sda] 625142448 512-byte hardware sectors (320073 MB)
[ 6.192978] sd 2:0:0:0: [sda] Write Protect is off
[ 6.192981] sd 2:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ 6.193014] sd 2:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 6.193092] sd 2:0:0:0: [sda] 625142448 512-byte hardware sectors (320073 MB)
[ 6.193117] sd 2:0:0:0: [sda] Write Protect is off
[ 6.193120] sd 2:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ 6.193160] sd 2:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 6.193166] sda:<4>Driver 'sr' needs updating - please use bus_type methods
[ 6.216987] sr0: scsi3-mmc drive: 24x/24x writer dvd-ram cd/rw xa/form2 cdda tray
[ 6.216993] Uniform CD-ROM driver Revision: 3.20
[ 6.217108] sr 0:0:0:0: Attached scsi CD-ROM sr0
[ 6.235837] sda1 sda2 sda3 sda4 < sda5 >
[ 6.260536] sd 2:0:0:0: [sda] Attached SCSI disk
[ 7.141196] loop: module loaded
[ 7.178307] kjournald starting. Commit interval 5 seconds
[ 7.178324] EXT3-fs: mounted filesystem with ordered data mode.
[ 7.564175] usb 1-2: new low speed USB device using ohci_hcd and address 3
[ 7.775552] usb 1-2: configuration #1 chosen from 1 choice
[ 10.393048] usb 4-2: new high speed USB device using ehci_hcd and address 2
[ 10.526931] usb 4-2: configuration #1 chosen from 1 choice
[ 12.507192] udevd version 124 started
[ 12.961313] input: Power Button (FF) as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input2
[ 12.988041] ACPI: Power Button (FF) [PWRF]
[ 12.988137] input: Lid Switch as /devices/LNXSYSTM:00/device:00/PNP0C0D:00/input/input3
[ 13.007575] ACPI: Lid Switch [LID]
[ 13.007662] input: Sleep Button (CM) as /devices/LNXSYSTM:00/device:00/PNP0C0E:00/input/input4
[ 13.025039] ACPI: Sleep Button (CM) [SLPB]
[ 13.025181] input: Power Button (CM) as /devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input5
[ 13.057026] ACPI: Power Button (CM) [PWRB]
[ 13.201124] ACPI: WMI: Mapper loaded
[ 13.443767] ACPI: AC Adapter [ACAD] (on-line)
[ 13.773093] ACPI: Battery Slot [BAT1] (battery absent)
[ 13.936156] usbcore: registered new interface driver hiddev
[ 13.967404] input: USB Mouse as /devices/pci0000:00/0000:00:02.0/usb1/1-2/1-2:1.0/input/input6
[ 13.988828] input,hidraw0: USB HID v1.11 Mouse [USB Mouse] on usb-0000:00:02.0-2
[ 13.988854] usbcore: registered new interface driver usbhid
[ 13.988858] usbhid: v2.6:USB HID core driver
[ 14.094257] Linux video capture interface: v2.00
[ 14.214729] ricoh-mmc: Ricoh MMC Controller disabling driver
[ 14.214733] ricoh-mmc: Copyright(c) Philip Langdale
[ 14.214769] ricoh-mmc: Ricoh MMC controller found at 0000:01:04.2 [1180:0843] (rev 12)
[ 14.214783] ricoh-mmc: Controller is now disabled.
[ 14.303785] uvcvideo: Found UVC 1.00 device Acer Crystal Eye webcam (064e:a103)
[ 14.319528] input: Acer Crystal Eye webcam as /devices/pci0000:00/0000:00:02.1/usb3/3-3/3-3:1.0/input/input7
[ 14.319571] usbcore: registered new interface driver uvcvideo
[ 14.319575] USB Video Class driver (v0.1.0)
[ 14.328866] sdhci: Secure Digital Host Controller Interface driver
[ 14.328870] sdhci: Copyright(c) Pierre Ossman
[ 14.357565] usbcore: registered new interface driver libusual
[ 14.386000] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[ 14.392375] Initializing USB Mass Storage driver...
[ 14.393913] scsi6 : SCSI emulation for USB Mass Storage devices
[ 14.394063] usbcore: registered new interface driver usb-storage
[ 14.394067] USB Mass Storage support registered.
[ 14.394074] usb-storage: device found at 2
[ 14.394076] usb-storage: waiting for device to settle before scanning
[ 14.421579] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
[ 14.423305] sdhci-pci 0000:01:04.1: SDHCI controller found [1180:0822] (rev 22)
[ 14.423751] ACPI: PCI Interrupt Link [LNK2] enabled at IRQ 11
[ 14.423756] sdhci-pci 0000:01:04.1: PCI INT B -> Link[LNK2] -> GSI 11 (level, low) -> IRQ 11
[ 14.426800] mmc0: SDHCI controller on PCI [0000:01:04.1] using PIO
[ 14.556631] input: PC Speaker as /devices/platform/pcspkr/input/input8
[ 14.891974] acer-wmi: Acer Laptop ACPI-WMI Extras
[ 15.281076] ACPI: PCI Interrupt Link [LAZA] enabled at IRQ 21
[ 15.281083] HDA Intel 0000:00:07.0: PCI INT A -> Link[LAZA] -> GSI 21 (level, low) -> IRQ 21
[ 15.281104] HDA Intel 0000:00:07.0: setting latency timer to 64
[ 15.320799] input: PS/2 Mouse as /devices/platform/i8042/serio1/input/input9
[ 15.403275] input: AlpsPS/2 ALPS GlidePoint as /devices/platform/i8042/serio1/input/input10
[ 16.600571] lp: driver loaded but no devices found
[ 17.335331] EXT3 FS on loop0, internal journal
[ 19.393207] usb-storage: device scan complete
[ 19.394688] scsi 6:0:0:0: Direct-Access JetFlash Transcend 4GB 8.07 PQ: 0 ANSI: 2
[ 19.403822] sd 6:0:0:0: [sdb] 7843840 512-byte hardware sectors (4016 MB)
[ 19.405542] sd 6:0:0:0: [sdb] Write Protect is off
[ 19.405546] sd 6:0:0:0: [sdb] Mode Sense: 03 00 00 00
[ 19.405548] sd 6:0:0:0: [sdb] Assuming drive cache: write through
[ 19.407042] sd 6:0:0:0: [sdb] 7843840 512-byte hardware sectors (4016 MB)
[ 19.408542] sd 6:0:0:0: [sdb] Write Protect is off
[ 19.408545] sd 6:0:0:0: [sdb] Mode Sense: 03 00 00 00
[ 19.408547] sd 6:0:0:0: [sdb] Assuming drive cache: write through
[ 19.408552] sdb: sdb1
[ 19.988957] sd 6:0:0:0: [sdb] Attached SCSI removable disk
[ 19.989093] sd 6:0:0:0: Attached scsi generic sg2 type 0
[ 29.545843] Adding 976552k swap on /host/ubuntu/disks/swap.disk. Priority:-1 extents:1 across:976552k
[ 29.748357] type=1505 audit(1229064097.360:2): operation="profile_load" name="/usr/share/gdm/guest-session/Xsession" name2="default" pid=4427
[ 29.948957] type=1505 audit(1229064097.560:3): operation="profile_load" name="/usr/lib/cups/backend/cups-pdf" name2="default" pid=4432
[ 29.949231] type=1505 audit(1229064097.564:4): operation="profile_load" name="/usr/sbin/cupsd" name2="default" pid=4432
[ 30.115788] ip_tables: (C) 2000-2006 Netfilter Core Team
[ 31.043020] powernow-k8: Found 1 AMD Turion(tm) 64 X2 Mobile Technology TL-60 processors (2 cpu cores) (version 2.20.00)
[ 31.043518] powernow-k8: 0 : fid 0xc (2000 MHz), vid 0x12
[ 31.043522] powernow-k8: 1 : fid 0xa (1800 MHz), vid 0x13
[ 31.043525] powernow-k8: 2 : fid 0x8 (1600 MHz), vid 0x14
[ 31.043528] powernow-k8: 3 : fid 0x0 (800 MHz), vid 0x1e
[ 31.615428] warning: `avahi-daemon' uses 32-bit capabilities (legacy support in use)
[ 31.652426] apm: BIOS not found.
[ 31.811555] ppdev: user-space parallel port driver
[ 33.384974] Bluetooth: Core ver 2.13
[ 33.386703] NET: Registered protocol family 31
[ 33.386714] Bluetooth: HCI device and connection manager initialized
[ 33.386724] Bluetooth: HCI socket layer initialized
[ 33.420571] Bluetooth: L2CAP ver 2.11
[ 33.420589] Bluetooth: L2CAP socket layer initialized
[ 33.468904] Bluetooth: RFCOMM socket layer initialized
[ 33.471619] Bluetooth: RFCOMM TTY layer initialized
[ 33.471647] Bluetooth: RFCOMM ver 1.10
[ 33.474307] Bluetooth: BNEP (Ethernet Emulation) ver 1.3
[ 33.474316] Bluetooth: BNEP filters: protocol multicast
[ 33.501041] Clocksource tsc unstable (delta = -147866260 ns)
[ 33.525533] Bridge firewalling registered
[ 33.525955] pan0: Dropping NETIF_F_UFO since no NETIF_F_HW_CSUM feature.
[ 33.570972] Bluetooth: SCO (Voice Link) ver 0.6
[ 33.570992] Bluetooth: SCO socket layer initialized
[ 37.683066] eth0: no link during initialization.
[ 59.743475] canberra-gtk-pl[5700]: segfault at 9a238c8 ip b71b584d sp b6f4efa0 error 6 in libpulse.so.0.4.1[b7176000+4e000]
[ 62.614817] CPU0 attaching NULL sched-domain.
[ 62.614853] CPU1 attaching NULL sched-domain.
[ 62.618659] CPU0 attaching sched-domain:
[ 62.618681] domain 0: span 0-1 level CPU
[ 62.618689] groups: 0 1
[ 62.618710] CPU1 attaching sched-domain:
[ 62.618715] domain 0: span 0-1 level CPU
[ 62.618721] groups: 1 0
[ 228.261046] CE: hpet increasing min_delta_ns to 15000 nsec
Module Size Used by
nls_iso8859_1 12032 1
nls_cp437 13696 1
vfat 18816 1
fat 57376 1 vfat
binfmt_misc 16904 1
sco 18308 2
bridge 56980 0
stp 10628 1 bridge
bnep 20480 2
rfcomm 44432 0
l2cap 30464 6 bnep,rfcomm
bluetooth 61924 6 sco,bnep,rfcomm,l2cap
ppdev 15620 0
powernow_k8 22148 1
cpufreq_userspace 11396 0
cpufreq_stats 13188 0
cpufreq_ondemand 14988 1
cpufreq_powersave 9856 0
cpufreq_conservative 14600 0
freq_table 12672 3 powernow_k8,cpufreq_stats,cpufreq_ondemand
pci_slot 12552 0
sbs 19464 0
container 11520 0
sbshc 13440 1 sbs
video 25104 0
output 11008 1 video
iptable_filter 10752 0
ip_tables 19600 1 iptable_filter
x_tables 22916 1 ip_tables
sbp2 29324 0
parport_pc 39204 0
lp 17156 0
parport 42604 3 ppdev,parport_pc,lp
joydev 18368 0
snd_hda_intel 381488 3
snd_pcm_oss 46848 0
snd_mixer_oss 22784 1 snd_pcm_oss
acer_wmi 18880 0
snd_pcm 83204 2 snd_hda_intel,snd_pcm_oss
led_class 12164 1 acer_wmi
snd_seq_dummy 10884 0
snd_seq_oss 38528 0
psmouse 45200 0
evdev 17696 11
serio_raw 13444 0
snd_seq_midi 14336 0
pcspkr 10624 0
snd_rawmidi 29824 1 snd_seq_midi
k8temp 12416 0
sdhci_pci 15360 0
shpchp 37908 0
usb_storage 81728 1
pci_hotplug 35236 1 shpchp
snd_seq_midi_event 15232 2 snd_seq_oss,snd_seq_midi
libusual 27156 1 usb_storage
sdhci 23940 1 sdhci_pci
mmc_core 58268 1 sdhci
uvcvideo 62728 0
snd_seq 57776 6 snd_seq_dummy,snd_seq_oss,snd_seq_midi,snd_seq_midi_event
ricoh_mmc 11904 0
compat_ioctl32 9344 1 uvcvideo
snd_timer 29960 2 snd_pcm,snd_seq
videodev 41344 1 uvcvideo
snd_seq_device 15116 5 snd_seq_dummy,snd_seq_oss,snd_seq_midi,snd_rawmidi,snd_seq
v4l1_compat 22404 2 uvcvideo,videodev
snd 63268 15 snd_hda_intel,snd_pcm_oss,snd_mixer_oss,snd_pcm,snd_seq_oss,snd_rawmidi,snd_seq,snd_timer,snd_seq_device
soundcore 15328 1 snd
usbhid 35840 0
snd_page_alloc 16136 2 snd_hda_intel,snd_pcm
hid 50560 1 usbhid
battery 18436 0
ac 12292 0
wmi 14504 1 acer_wmi
button 14224 0
ext3 133256 1
jbd 55444 1 ext3
mbcache 16004 1 ext3
loop 23180 2
sr_mod 22212 0
cdrom 43168 1 sr_mod
sd_mod 42264 4
crc_t10dif 9984 1 sd_mod
sg 39732 0
ata_generic 12932 0
ahci 37132 1
pata_amd 18692 0
ohci1394 37936 0
pata_acpi 12160 0
forcedeth 61328 0
ieee1394 96324 2 sbp2,ohci1394
libata 177312 4 ata_generic,ahci,pata_amd,pata_acpi
scsi_mod 155212 6 sbp2,usb_storage,sr_mod,sd_mod,sg,libata
dock 16656 1 libata
ehci_hcd 43276 0
ohci_hcd 31888 0
usbcore 148848 7 usb_storage,libusual,uvcvideo,usbhid,ehci_hcd,ohci_hcd
thermal 23708 0
processor 42156 3 powernow_k8,thermal
fan 12548 0
fbcon 47648 0
tileblit 10880 1 fbcon
font 16512 1 fbcon
bitblit 13824 1 fbcon
softcursor 9984 1 bitblit
fuse 60828 5
Only plain text email is forwarded by the Discuss@xxxxxxxxxxxxx List Server,
as HTML can contain viruses. Use as the email Subject Line:
YourName, YourCountry kernel 2.6.27-7-generic
With this Subject Line cogent experts will be alerted, and useful case names left in the Archive.
YourCountry will enable Country specific guidance. Linux experts in YourCountry
can be found through: http://www.linux.org/groups/index.html.
They will know your Country's modem code, which may be essential for dialup service.
Responses from Discuss@xxxxxxxxxxxxx are sometimes blocked by an Internet Provider mail filters.
So in a day, also check the Archived responses at http://www.linmodems.org
-------------------------- System information ----------------------------
CPU=i686,
Linux version 2.6.27-7-generic (buildd@rothera) (gcc version 4.3.2 (Ubuntu 4.3.2-1ubuntu10) ) #1 SMP Fri Oct 24 06:42:44 UTC 2008
scanModem update of: 2008_11_06
There are no blacklisted modem drivers in /etc/modprobe* files
Attached USB devices are:
ID 058f:6387 Alcor Micro Corp. Transcend JetFlash Flash Drive
ID 1d6b:0002 Linux Foundation 2.0 root hub
ID 064e:a103 Suyin Corp.
ID 1d6b:0002 Linux Foundation 2.0 root hub
ID 1d6b:0001 Linux Foundation 1.1 root hub
ID 04f3:0217 Elan Microelectronics Corp.
ID 1d6b:0001 Linux Foundation 1.1 root hub
USB modems not recognized
For candidate card in slot 00:07.0, firmware information and bootup diagnostics are:
PCI slot PCI ID SubsystemID Name
---------- --------- --------- --------------
00:07.0 10de:055c 1025:0126 Audio device: nVidia Corporation MCP67 High Definition Audio
Modem interrupt assignment and sharing:
21: 8 1537 IO-APIC-fasteoi ehci_hcd:usb3, HDA Intel
--- Bootup diagnostics for card in PCI slot 00:07.0 ----
[ 0.616622] PCI: 0000:00:07.0 reg 10 32bit mmio: [d0780000, d0783fff]
[ 0.616647] pci 0000:00:07.0: PME# supported from D3hot D3cold
[ 0.616650] pci 0000:00:07.0: PME# disabled
[ 1.504070] pci 0000:00:07.0: Enabling HT MSI Mapping
[ 15.281083] HDA Intel 0000:00:07.0: PCI INT A -> Link[LAZA] -> GSI 21 (level, low) -> IRQ 21
[ 15.281104] HDA Intel 0000:00:07.0: setting latency timer to 64
The PCI slot 00:07.0 of the modem card may be disabled early in
a bootup process, but then enabled later. If modem drivers load
but the modem is not responsive, read DOCs/Bootup.txt about possible fixes.
Send dmesg.txt along with ModemData.txt to discuss@xxxxxxxxxxxxx
if help is needed.
===== Advanced Linux Sound Architecture (ALSA) diagnostics =====
The ALSA packages provide audio support and also drivers for some modems.
ALSA diagnostics are written during bootup to /proc/asound/ folders.
The ALSA verion is 1.0.17
The modem cards detected by "aplay -l" are: None
The /proc/asound/pcm file reports:
-----------------------
00-00: ALC268 Analog : ALC268 Analog : playback 1 : capture 1
about /proc/asound/cards:
------------------------
0 [NVidia ]: HDA-Intel - HDA NVidia
HDA NVidia at 0xd0780000 irq 21
PCI slot 00:07.0 has a High Definition Audio Card
The drivers are in the kernel modules tree at:
/lib/modules/2.6.27-7-generic/kernel/sound/pci/hda/snd-hda-intel.ko
The modem codec file for the HDA card is: /proc/asound/card0/codec#1
--------------------------------------------------------
Codec: Conexant ID 2c06
Address: 1
Vendor Id: 0x14f12c06
Subsystem Id: 0x10250126
Revision Id: 0x100000
Modem Function Group: 0x2
The audio card hosts a softmodem chip: 0x14f12c06
14f1 is the Conexant Vendor ID, and 0x14f12c06 a softmodem chipset.
Get a hsfmodem package through http://www.linuxant.com
If not a Conexant modem, the driver hsfmodem-drivers with its dependent drivers:
----------
provide audio + modem support with the modem chip residing on the subsystem.
Any particular card can host any one of several soft modem chips.
=== Finished firmware and bootup diagnostics, next deducing cogent software. ===
Predictive diagnostics for card in bus 00:07.0:
Modem chipset detected on
NAME="Audio device: nVidia Corporation MCP67 High Definition Audio "
CLASS=0403
PCIDEV=10de:055c
SUBSYS=1025:0126
IRQ=21
HDA=10de:055c
SOFT=10de:055c.HDA
CHIP=0x14f12c06
CodecClass=14f1
IDENT=hsfmodem
Driver=hsfmodem-drivers
For candidate modem in: 00:07.0
0403 Audio device: nVidia Corporation MCP67 High Definition Audio
Primary device ID: 10de:055c
Subsystem PCI_id 1025:0126
Softmodem codec or chipset from diagnostics: 0x14f12c06
from Archives:
The HDA card softmodem chip is 0x14f12c06
Support type needed or chipset: hsfmodem
For owners of a Dell PCs with Conexant HSF modems, a driver source package with full speed enabled is available, but requires driver compiling. Read DOCs/Conexant.txt
Start at http://www.linuxant.com/drivers/hsf/downloads-license.php to find the
hsfmodem package matching your System. For several Linux distros, there are
precompiled drivers matched to specific kernels. These have within the FileName,
your KernelVersion: 2.6.27_7_generic
They can be found through http://www.linuxant.com/drivers/hsf/full/downloads.php
A more precise location may be given a few paragraphs below.
If an EXACT Match with your your KernelVersion is not found, one of the
"Generic packages with source" near the bottom of the page must be used.
Downloaded packages must be moved into the Linux partition (home folder is OK)
and unzipped with:
unzip hsf*.zip
The installation command for a .deb suffic packages is, with root/adm permission:
sudo dpkg -i hsf*.deb
while for .rpm suffix it is, with:
rpm -i hsf*.rpm
Support for Conexant chips hosted on High Definition Audio cards may require
installation of additional packages, one of the alsa-driver-linuxant packages
on http://www.linuxant.com/alsa-driver/ At the same time download the
alsa-driver-1.0.17-1.patch , in case it prove to be later needed. During the
hsfmodem install, there will be a message if there is necessary installation of
alsa-driver-linuxant
The installation command for a .deb suffic packages is, with root/adm permission:
sudo alsa* -i hsf*.deb
while for .rpm suffix it is, with:
rpm -i hsf*.rpm
There may a message that "Dependencies" are not satisfied. In this case the Ubuntu/Debian packages to be installed are linux-libc-dev & libc6-dev. Package
names may be different for other Linuxes. If not on your install CD, these
packages can be searched for at http://packages.ubuntu.com. After download,
they can be coinstalled with:
sudo dpkg -i li*.deb
Again try the alsa-driver-linuxant
There may be a message that the patch must be applied. In this case get the
ftp://ftp.alsa-project.org/pub/driver/alsa-driver-1.0.17.tar.bz2
Under Linux, this package is unpacked with:
$ tar jxf alsa*.tar.bz2
Next the patch is applied with:
$ patch -p0 < alsa-driver-1.0.17-1.patch
See http://linmodems.technion.ac.il/bigarch/archive-eighth/msg00838.html
for details on compiling and installing replacement snd-hda-intel + its
dependent drivers.
After the installation is completed, rerun the hsfmodem installation.
Reboot and try to detect the modem with Root permission:
sudo wvdialconf /etc/wvdial.conf
From http://www.linuxant.com/drivers/hsf/full/downloads-ubuntu-x86.php
download hsfmodem-7.68.00.12full_k2.6.27_7_generic_ubuntu_i386.deb.zip
Under Linux unpack with:
$ unzip hsfmodem*.zip
Then install with:
$ sudo dpkg -i hsfmodem*.deb
Subsequently, the modem should be found with
$ sudo wvdialconf /etc/wvdial.conf
Edit in your personal information with:
$ sudo gedit /etc/wvdial.conf
and try dialing out with:
$ sudo wvdial.
See DOCs/Testing.txt for details.
Read DOCs/Conexant.txt
Writing DOCs/Conexant.txt
Completed candidate modem analyses.
The base of the UDEV device file system is: /dev/.udev
Versions adequately match for the compiler installed: 4.3.2
and the compiler used in kernel assembly: 4.3.2
Minimal compiling resources appear complete:
make utility - /usr/bin/make
Compiler version 4.3
linuc_headers base folder /lib/modules/2.6.27-7-generic/build
However some compilations and executable functions may need additional files,
in the FileNames.h (so called kernel "h"eaders) collection installed in /usr/include/ .
For martian_modem, additional required packages are needed. The also required headers of package libc6 are commonly installed by default.
Compiling hsfmodem drivers does require linux-libc-dev and libc6-dev packages, for kernels 2.6.24 and later versions.
In not included on your install CD, search for them at http://packages.ubuntu.com
or comparable Repository for other Linux distros.
When compiling ALSA drivers, the utility "patch" will also be needed.
If a driver compilation fails, with message including some lack of some FileName.h (stdio.h for example), then
Some additional kernel-header files need installation to /usr/include. The minimal additional packages are libc6-dev
and any of its dependents, under Ubuntu linux-libc-dev
If an alternate ethernet connection is available,
$ apt-get update
$ apt-get -s install linux-kernel-devel
will install needed packages.
For Debian/Ubuntu related distributions, run the following command to display the needed package list:
Otherwise packages have to be found through http://packages.ubuntu.com
Once downloaded and transferred into a Linux partition,
they can be installed alltogether with:
$ sudo dpkg -i *.deb
Checking pppd properties:
-rwsr-xr-- 1 root dip 273064 2008-10-15 21:51 /usr/sbin/pppd
In case of an "error 17" "serial loopback" problem, see:
http://linmodems.technion.ac.il/linmodems/archive-sixth/msg02637.html
To enable dialout without Root permission do:
$ su - root (not for Ubuntu)
sudo chmod a+x /usr/sbin/pppd
or under Ubuntu related Linuxes
sudo chmod a+x /usr/sbin/pppd
Checking settings of: /etc/ppp/options
asyncmap 0
noauth
crtscts
lock
hide-password
modem
proxyarp
lcp-echo-interval 30
lcp-echo-failure 4
noipx
In case of a message like:
Warning: Could not modify /etc/ppp/pap-secrets: Permission denied
see http://linmodems.technion.ac.il/bigarch/archive-sixth/msg04656.html
Read Modem/DOCs/YourSystem.txt concerning other COMM channels: eth0
Which can interfere with Browser naviagation.
Don't worry about the following, it is for experts should trouble shooting be necessary.
==========================================================
Checking for modem support lines:
--------------------------------------
/device/modem symbolic link:
slmodemd created symbolic link /dev/ttySL0:
Within /etc/udev/ files:
Within /etc/modprobe.conf files:
/etc/modprobe.d/alsa-base:options snd-atiixp-modem index=-2
/etc/modprobe.d/alsa-base:options snd-via82xx-modem index=-2
/etc/modprobe.d/blacklist-modem:# Uncomment these entries in order to blacklist unwanted modem drivers
/etc/modprobe.d/blacklist-modem:# blacklist snd-atiixp-modem
/etc/modprobe.d/blacklist-modem:# blacklist snd-via82xx-modem
Within any ancient /etc/devfs files:
Within ancient kernel 2.4.n /etc/module.conf files:
--------- end modem support lines --------
