Luis, scanModem recommends hsfmodem driver: Support type needed or chipset: hsfmodem For owners of a Dell PCs with Conexant HSF modems, a driver source package with full speed enabled is available, but requires driver compiling. Read DOCs/Conexant.txt Support for the 14f1:2f50 and 14f1:2215 HSF modems is projected early in 2007 from Linuxant. Start at http://www.linuxant.com/drivers/hsf/downloads-license.php to find the hsfmodem package matching your System. For several Linux distros, there are precompiled drivers matched to specific kernels. These have within the FileName, your KernelVersion: 2.6.27_7_generic They can be found through http://www.linuxant.com/drivers/hsf/full/downloads.php A more precise location may be given a few paragraphs below. If an EXACT Match with your your KernelVersion is not found, one of the "Generic packages with source" near the bottom of the page must be used. Downloaded packages must be moved into the Linux partition (home folder is OK) and unzipped with: unzip hsf*.zip The installation command for a .deb suffic packages is, with root/adm permission: sudo dpkg -i hsf*.deb while for .rpm suffix it is, with: rpm -i hsf*.rpm From http://www.linuxant.com/drivers/hsf/full/downloads-ubuntu-x86.php download hsfmodem-7.68.00.12full_k2.6.27_7_generic_ubuntu_i386.deb.zip Under Linux unpack with: $ unzip hsfmodem*.zip Then install with: $ sudo dpkg -i hsfmodem*.deb Subsequently, the modem should be found with $ sudo wvdialconf /etc/wvdial.conf Edit in your personal information with: $ sudo gedit /etc/wvdial.conf and try dialing out with: $ sudo wvdial. See DOCs/Testing.txt for details. Read DOCs/Conexant.txt Regards, Antonio On 12/30/08, "Ing. Luis Manuel Garcés Socarrás" <lmgarcess@xxxxxxxxxxxxxxxxxxxxxx> wrote: > -------------------------- System information ---------------------------- > CPU=i686, > Linux version 2.6.27-7-generic (buildd@rothera) (gcc version 4.3.2 > (Ubuntu 4.3.2-1ubuntu10) ) #1 SMP Fri Oct 24 06:42:44 UTC 2008 > scanModem update of: 2008_10_24 > > There are no blacklisted modem drivers in /etc/modprobe* files > Attached USB devices are: > ID 1d6b:0002 Linux Foundation 2.0 root hub > ID 1d6b:0001 Linux Foundation 1.1 root hub > ID 10d6:1100 Actions Semiconductor Co., Ltd MPMan MP-Ki 128 MP3 > Player/Recorder > ID 1d6b:0001 Linux Foundation 1.1 root hub > ID 1d6b:0001 Linux Foundation 1.1 root hub > > USB modems not recognized > > For candidate card in slot 01:02.0, firmware information and bootup > diagnostics are: > PCI slot PCI ID SubsystemID Name > ---------- --------- --------- -------------- > 01:02.0 14f1:2f50 14f1:205f Serial controller: Conexant > Systems, Inc. Conexant SoftK56 Data/Fax Modem > > Modem interrupt assignment and sharing: > --- Bootup diagnostics for card in PCI slot 01:02.0 ---- > [ 0.504664] PCI: 0000:01:02.0 reg 10 32bit mmio: [e0000000, e000ffff] > [ 0.504672] PCI: 0000:01:02.0 reg 14 io port: [c000, c007] > [ 0.504709] pci 0000:01:02.0: PME# supported from D3hot D3cold > [ 0.504714] pci 0000:01:02.0: PME# disabled > [ 1.812214] serial 0000:01:02.0: PCI INT A -> GSI 22 (level, low) -> > IRQ 22 > > The PCI slot 01:02.0 of the modem card may be disabled early in > a bootup process, but then enabled later. If modem drivers load > but the modem is not responsive, read DOCs/Bootup.txt about possible > fixes. > Send dmesg.txt along with ModemData.txt to discuss@xxxxxxxxxxxxx > if help is needed. > > > === Finished firmware and bootup diagnostics, next deducing cogent > software. === > > Predictive diagnostics for card in bus 01:02.0: > Modem chipset detected on > NAME="Serial controller: Conexant Systems, Inc. Conexant SoftK56 > Data/Fax Modem " > CLASS=0700 > PCIDEV=14f1:2f50 > SUBSYS=14f1:205f > IRQ=22 > IDENT=hsfmodem > Driver=hsfmodem-drivers > > For candidate modem in: 01:02.0 > 0700 Serial controller: Conexant Systems, Inc. Conexant SoftK56 > Data/Fax Modem > Primary device ID: 14f1:2f50 > Support type needed or chipset: hsfmodem > > > > For owners of a Dell PCs with Conexant HSF modems, a driver source > package with full speed enabled is available, but requires driver > compiling. Read DOCs/Conexant.txt > > Support for the 14f1:2f50 and 14f1:2215 HSF modems is projected early > in 2007 from Linuxant. > > Start at http://www.linuxant.com/drivers/hsf/downloads-license.php to > find the > hsfmodem package matching your System. For several Linux distros, there are > precompiled drivers matched to specific kernels. These have within the > FileName, > your KernelVersion: 2.6.27_7_generic > They can be found through > http://www.linuxant.com/drivers/hsf/full/downloads.php > A more precise location may be given a few paragraphs below. > If an EXACT Match with your your KernelVersion is not found, one of the > "Generic packages with source" near the bottom of the page must be used. > Downloaded packages must be moved into the Linux partition (home folder > is OK) > and unzipped with: > unzip hsf*.zip > The installation command for a .deb suffic packages is, with root/adm > permission: > sudo dpkg -i hsf*.deb > while for .rpm suffix it is, with: > rpm -i hsf*.rpm > From http://www.linuxant.com/drivers/hsf/full/downloads-ubuntu-x86.php > download hsfmodem-7.68.00.12full_k2.6.27_7_generic_ubuntu_i386.deb.zip > Under Linux unpack with: > $ unzip hsfmodem*.zip > Then install with: > $ sudo dpkg -i hsfmodem*.deb > Subsequently, the modem should be found with > $ sudo wvdialconf /etc/wvdial.conf > Edit in your personal information with: > $ sudo gedit /etc/wvdial.conf > and try dialing out with: > $ sudo wvdial. > See DOCs/Testing.txt for details. > > Read DOCs/Conexant.txt > > Writing DOCs/Conexant.txt > > > Completed candidate modem analyses. > > The base of the UDEV device file system is: /dev/.udev > > Versions adequately match for the compiler installed: 4.3.2 > and the compiler used in kernel assembly: 4.3.2 > > > > Minimal compiling resources appear complete: > make utility - /usr/bin/make > Compiler version 4.3 > linuc_headers base folder /lib/modules/2.6.27-7-generic/build > > However some compilations and executable functions may need additional > files, > in the FileNames.h (so called kernel "h"eaders) collection installed > in /usr/include/ . > For martian_modem, additional required packages are needed. The also > required headers of package libc6 are commonly installed by default. > Compiling hsfmodem drivers does require linux-libc-dev and libc6-dev > packages, for kernels 2.6.24 and later versions. > In not included on your install CD, search for them at > http://packages.ubuntu.com > or comparable Repository for other Linux distros. > When compiling ALSA drivers, the utility "patch" will also be needed. > > > > > If a driver compilation fails, with message including some lack of some > FileName.h (stdio.h for example), then > Some additional kernel-header files need installation to /usr/include. > The minimal additional packages are libc6-dev > and any of its dependents, under Ubuntu linux-libc-dev > > If an alternate ethernet connection is available, > $ apt-get update > $ apt-get -s install linux-kernel-devel > will install needed packages. > For Debian/Ubuntu related distributions, run the following command to > display the needed package list: > > Otherwise packages have to be found through http://packages.ubuntu.com > Once downloaded and transferred into a Linux partition, > they can be installed alltogether with: > $ sudo dpkg -i *.deb > > > Checking pppd properties: > -rwsr-xr-- 1 root dip 273064 2008-10-15 21:51 /usr/sbin/pppd > > In case of an "error 17" "serial loopback" problem, see: > http://linmodems.technion.ac.il/linmodems/archive-sixth/msg02637.html > > To enable dialout without Root permission do: > $ su - root (not for Ubuntu) > sudo chmod a+x /usr/sbin/pppd > or under Ubuntu related Linuxes > sudo chmod a+x /usr/sbin/pppd > > Checking settings of: /etc/ppp/options > asyncmap 0 > noauth > crtscts > lock > hide-password > modem > proxyarp > lcp-echo-interval 30 > lcp-echo-failure 4 > noipx > > In case of a message like: > Warning: Could not modify /etc/ppp/pap-secrets: Permission denied > see http://linmodems.technion.ac.il/bigarch/archive-sixth/msg04656.html > > Read Modem/DOCs/YourSystem.txt concerning other COMM channels: eth0 > Which can interfere with Browser naviagation. > > Don't worry about the following, it is for experts should trouble > shooting be necessary. > ========================================================== > > Checking for modem support lines: > -------------------------------------- > /device/modem symbolic link: > slmodemd created symbolic link /dev/ttySL0: > Within /etc/udev/ files: > > Within /etc/modprobe.conf files: > /etc/modprobe.d/blacklist-modem:# Uncomment these entries in order to > blacklist unwanted modem drivers > /etc/modprobe.d/blacklist-modem:# blacklist snd-atiixp-modem > /etc/modprobe.d/blacklist-modem:# blacklist snd-via82xx-modem > /etc/modprobe.d/alsa-base:options snd-atiixp-modem index=-2 > /etc/modprobe.d/alsa-base:options snd-via82xx-modem index=-2 > Within any ancient /etc/devfs files: > > Within ancient kernel 2.4.n /etc/module.conf files: > > --------- end modem support lines -------- > > VI Conferencia Internacional de Energía Renovable, Ahorro de Energía y > Educación Energética > 9 - 12 de Junio 2009, Palacio de las Convenciones > ...Por una cultura energética sustentable > www.ciercuba.com >
