RE: > Carrier Check = mp Don't know what mp does. Recheck with: Carrier Check = no MarvS On Sun, Dec 21, 2008 at 10:37 AM, Sebastian Felber <sf-freital@xxxxxx> wrote: > Hi, > > I did as you said and used the slusb64bit-2.9.11-20070813.tar.gz on > 2.6.24-19-generic kernel. > > Here are the outputs. > > $ sudo modprobe slusb debug=3 > [ 1888.421290] Symbol usb_register_driver is being used by a non-GPL > module, which will not be allowed in the future > [ 1888.421295] Please see the file > Documentation/feature-removal-schedule.txt in the kernel > source tree for more details. > [ 1888.421393] Symbol usb_deregister is being used by a non-GPL module, > which will not be allowed in the future > [ 1888.421395] Please see the file > Documentation/feature-removal-schedule.txt in the kernel > source tree for more details. > [ 1888.422569] ST7554 USB Modem. > [ 1888.440614] <6>slusb: slusb0 is found. > [ 1888.440640] usbcore: registered new interface driver ST7554 USB Modem > > $ sudo slmodemd -d1 -c GERMANY /dev/slusb0 > > $ sudo wvdialconf wvtest > Editing `wvtest'. > > Scanning your serial ports for a modem. > > Modem Port Scan<*1>: S0 S1 S2 S3 > WvModem<*1>: Cannot get information for serial port. > ttySL0<*1>: ATQ0 V1 E1 -- OK > ttySL0<*1>: ATQ0 V1 E1 Z -- OK > ttySL0<*1>: ATQ0 V1 E1 S0=0 -- OK > ttySL0<*1>: ATQ0 V1 E1 S0=0 &C1 -- OK > ttySL0<*1>: ATQ0 V1 E1 S0=0 &C1 &D2 -- OK > ttySL0<*1>: ATQ0 V1 E1 S0=0 &C1 &D2 +FCLASS=0 -- OK > ttySL0<*1>: Modem Identifier: ATI -- SmartLink Soft Modem > ttySL0<*1>: Speed 4800: AT -- OK > ttySL0<*1>: Speed 9600: AT -- OK > ttySL0<*1>: Speed 19200: AT -- OK > ttySL0<*1>: Speed 38400: AT -- OK > ttySL0<*1>: Speed 57600: AT -- OK > ttySL0<*1>: Speed 115200: AT -- OK > ttySL0<*1>: Speed 230400: AT -- OK > ttySL0<*1>: Speed 460800: AT -- OK > ttySL0<*1>: Max speed is 460800; that should be safe. > ttySL0<*1>: ATQ0 V1 E1 S0=0 &C1 &D2 +FCLASS=0 -- OK > > Found a modem on /dev/ttySL0. > Modem configuration written to wvtest. > ttySL0<Info>: Speed 460800; init "ATQ0 V1 E1 S0=0 &C1 &D2 +FCLASS=0" > > $ modified wvtest > [Dialer Defaults] > Init1 = ATZ > Init2 = ATQ0 V1 E1 S0=0 &C1 &D2 +FCLASS=0 > Modem Type = Analog Modem > ISDN = 0 > Modem = /dev/ttySL0 > Baud = 460800 > Carrier Check = mp > Phone = 01920782 > Username = arcor > Password = internet > > $ sudo wvdial --config=wvtest > --> WvDial: Internet dialer version 1.60 > --> Cannot get information for serial port. > --> Initializing modem. > --> Sending: ATZ > ATZ > OK > --> Sending: ATQ0 V1 E1 S0=0 &C1 &D2 +FCLASS=0 > ATQ0 V1 E1 S0=0 &C1 &D2 +FCLASS=0 > OK > --> Modem initialized. > --> Sending: ATDT01920782 > --> Waiting for carrier. > ATDT01920782 > --> Timed out while dialing. Trying again. > --> Sending: ATDT01920782 > --> Waiting for carrier. > NO CARRIER > ATDT01920782 > --> No Carrier! Trying again. > --> Sending: ATDT01920782 > --> Waiting for carrier. > NO CARRIER > ATDT01920782 > --> No Carrier! Trying again. > --> Sending: ATDT01920782 > --> Waiting for carrier. > NO CARRIER > until i press CTRL-C > > and the debug output of slmodemd > <126.525061> main: termios changed. > <126.525068> slusb0: update termios... > <126.525073> main: pty closed. > <250.524864> main: termios changed. > <250.524880> slusb0: update termios... > <250.524981> slusb0: run cmd: ATZ > <250.524991> slusb0: modem reset... > <250.524994> slusb0: modem set state: 1 --> 1... > <250.524999> slusb0: modem set mode: -> 0... > <250.525004> slusb0: modem report result: 0 (OK) > <250.624986> slusb0: run cmd: ATQ0V1E1S0=0&C1&D2+FCLASS=0 > <250.624997> slusb0: modem set mode: -> 0... > <250.625008> slusb0: modem report result: 0 (OK) > <250.724968> slusb0: run cmd: ATDT01920782 > <250.724973> slusb0: modem dial: T01920782... > <250.724978> slusb0: modem_dial_start... > <250.724994> slusb0: modem_start.. > <250.725006> slusb0: modem set state: 1 --> 2... > <250.725011> slusb0: new state: DP_ESTAB > <250.725013> main: modemap_ioctl: cmd 8, arg 3... > <250.725034> slusb0: modem set hook: 0 --> 1... > <250.725043> main: modemap_ioctl: cmd 2, arg 1... > <250.726210> main: modemap_ioctl: cmd 11, arg 0... > <250.726245> main: modemap_ioctl: cmd 4, arg 2580... > <250.726254> main: modemap_ioctl: cmd 7, arg 30... > <250.726260> main: modemap_start... > > <--- if it work comes something like this > change dp ---> 8 > change dp ---> 90 > <--- and other stuff > > <310.184884> slusb0: modem_tty_write: hangup... > <310.184898> slusb0: modem_hup... > <310.184901> slusb0: modem set state: 2 --> 9... > <310.184904> slusb0: new state: DP_DISC > <310.189619> slusb0: modem_stop.. > <310.189625> main: modemap_stop... > <310.192619> slusb0: modem set hook: 1 --> 0... > <310.192637> main: modemap_ioctl: cmd 2, arg 0... > <310.193601> main: modemap_ioctl: cmd 8, arg 0... > <310.193622> slusb0: modem set state: 9 --> 1... > <310.193626> slusb0: new state: MODEM_IDLE > <310.193629> slusb0: modem report result: 3 (NO CARRIER) > <310.193743> slusb0: run cmd: ATDT01920782 > <310.193748> slusb0: modem dial: T01920782... > <310.193751> slusb0: modem_dial_start... > <310.193765> slusb0: modem_start.. > <310.193767> slusb0: modem set state: 1 --> 2... > <310.193770> slusb0: new state: DP_ESTAB > <310.193773> main: modemap_ioctl: cmd 8, arg 3... > <310.193783> slusb0: modem set hook: 0 --> 1... > <310.193786> main: modemap_ioctl: cmd 2, arg 1... > <310.194600> main: modemap_ioctl: cmd 11, arg 0... > <310.194629> main: modemap_ioctl: cmd 4, arg 2580... > <310.194634> main: modemap_ioctl: cmd 7, arg 30... > <310.194639> main: modemap_start... > <310.492880> slusb0: modem_tty_write: hangup... > <310.492895> slusb0: modem_hup... > <310.492899> slusb0: modem set state: 2 --> 9... > <310.492903> slusb0: new state: DP_DISC > <310.494635> slusb0: modem_stop.. > <310.494643> main: modemap_stop... > <310.498637> slusb0: modem set hook: 1 --> 0... > <310.498649> main: modemap_ioctl: cmd 2, arg 0... > <310.499621> main: modemap_ioctl: cmd 8, arg 0... > <310.499642> slusb0: modem set state: 9 --> 1... > <310.499652> slusb0: new state: MODEM_IDLE > <310.499655> slusb0: modem report result: 3 (NO CARRIER) > and so on. > > Regards, > > Sebastian > >
