Sebastian, which kernel are you running now? This makes a difference because slusb won't run under kernels >= 2.6.25. It would be nice if you put in $ uname -r and $ subo lsusb or $ su - password: # lsusb AMD 64 slusb runs, but is different did you read the documentation http://linmodems.technion.ac.il/packages/smartlink/slusb64bit.txt Regards, Antonio On Thu, Dec 18, 2008 at 11:02 AM, Sebastian Felber <sf-freital@xxxxxx> wrote: > Hiya, > > i switched from ubuntu intrepid i386 to amd64. I have an Smartlink 56K USB Softmodem. While i used i386 the modem worked well, but in amd64 it don't connect. The driver slmodem-2.9.11-20080818 compiles well, after installing the ia32 libraries and development packages provided by ubuntu. > > But the modem won't connect. > > dmesg outputs > [ 4152.212067] ioctl32(slmodemd:9044): Unknown cmd fd(3) cmd(00000008){t:00;sz:0} arg(00000000) on /dev/slusb0 > > Then i googled for this error message, but didn't found some useful stuff. > Then i played around with initstrings, and it worked, the modem connected like in i386. jibeeeeee. Thought i found the right initstring, but after an reboot, the same problem, it won't connect. > Again, played around with initstrings, nothing works, but suddenly, it connect's again, jibeeeee. After reboot, it wont't connect. > > I realized that the ioctl32 error message only appears when the modem won't connect, if it connect's no error messages appear. I don't know why, it couldn't be the initstrings. > > My wvdial.conf > [Dialer Defaults] > Init1 = "ATZ" > #Init2 = "AT&A7&F&C1&D2+MS=92,0,32000,48000" > Init2 = "AT&FE0V1&A3&D2&C1S0=0&H1\N3N1X3%E0%C3" > Dial Command = ATM0DT > Modem Type = Analog Modem > #Baud = 460800 > Baud = 115200 > New PPPD = yes > Modem = /dev/modem > ISDN = off > Stupid Mode = on > Carrier Check = no > Auto Reconnect = off > Auto DNS = off > Abort on Busy = off > Abort on No Dialtone = off > Check Def Route = off > Idle Seconds = 0 > Phone = *** > Username = *** > Password = *** > > I would thank you for any help. > > Sebastian > > PS: I'm german, that's why the broken english. > -- > Psssst! Schon vom neuen GMX MultiMessenger gehört? Der kann`s mit allen: http://www.gmx.net/de/go/multimessenger >
