Re: 11c11040 under Ubuntu Intrepid Re: Fwd: need help for modem

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



שלום אילן !

In view of what you wrote, since you just want to make the modem work for the fun/sport, you may consider using an older Ubuntu Live CD. Just follow the instructions which I sent you. With an 8 GB disk on key you can use the Live CD keeping files when you power off.

Jacques
יעקב גולדברג, הטכניון, חיפה

Ilan Tal wrote:
Marvin and Jacques,
First of all, thanks for the detailed answers.
It is a great feeling that there are humans behind all these computers.
I am trying to learn as much as I can from your instructions.

If I understand correctly, this works only on the old kernel.
My guy feeling is to stay with the latest kernel and not drop back.
Perhaps I don't understand enough to know how it all fits together.

In any case, I don't really need the modem on my laptop.
It is just an exercise to help a friend with his computer (a totally
different computer
with an actual physical PCI modem card).
I tell my friends that when they get fed up with Windows and all its nonsense,
I'll help them to install a real operating system where they can enjoy
the computer.
In this particular case they want Open Office to have Hebrew menus.
This is no problem for Ubuntu, but it doesn't work for XP (English version).
I couldn't make Linux modem dial, but I said there is no way where
Ubuntu would fall down on such an issue. I didn't know what the answer was
but there were good people who would help me.

To start the process I decided to see if I could get my laptop to dial and then
progress on to his machine. If I have to drop back to an old kernel on my laptop
(this may not be a serious problem, but I don't have enough experience to know),
then I will stop the exercise on my laptop and continue with his computer.

Thanks again, and please let me know if my gut feelings are wrong.

Ilan


On Sun, Dec 14, 2008 at 9:26 PM, Marvin Stodolsky
<marvin.stodolsky@xxxxxxxxx> wrote:
Jacques and Antonio,

Please copy the additional information below to any further cases of
the 11c11040 under Ubuntu Intrepid, with  2.6.27 series kernels.
Returning home to my Linux box tomorrow,
I'll soon do a scanModem update which will output this temporary
guidance automatically. Bjorn is traveling for a couple of weeks and
will thus not be responding much to the 11c11040 chipset sector

Ilan,

Additionally, others have reported problems with the necessary
patching of snd-hda-intel driver as provided by Ubuntu.  Read recent
posts about the 11c11040 chipset problems under Ubuntu
When there is a solution under Intrepid kernels, it will be posted

If is possible under Intrepid to install an older linux-image-2.6.24,
starting from http://packages.ubuntu.com/hardy-updates/linux-image-2.6.24-19-generic
Also download from  http://linmodems.technion.ac.il/packages/ltmodem/11c11040/
the agrsm-ubuntu8.04.1-2.6.24-19-generic.tar.gz  which has precompiled drivers.

First install the older kernel package, within the Linux folder to
which it is copied (home folder or Desktop is OK):
$ sudo dpkg -i  linux-image*.deb

Then reboot under the 2.6.24-19-generic  kernel and unpack the driver resource:
$ tar zxf  agrsm*.tar.gz
$ cd agrsm-ubuntu8.04.1-2.6.24-19-generic
Browse the files therein and then run the
$ sudo  ./setup
You may have to reboot before the modem will be detected.
Do specifically read the agrsm_howto.txt on loading the drivers
manually and setting the symbolic links, before checking for modem
detection with:
$ sudo wvdialconf  /etc/wvdial.conf

MarvS
scanModem maintainer

On Sun, Dec 14, 2008 at 10:13 AM, Jacques Goldberg
<Jacques.Goldberg@xxxxxxx> wrote:
Ilan,

Your first post has not made its way to the list, at least I did not see it.

Your ModemData.txt (bravo for putting it in text) shows that your modem is
supported. Such soft modems require a driver without which Linux will not
discover them.

Please see http://linmodems.technion.ac.il/packages/ltmodem/11c11040/
on how to find and  install the driver which you need.

To connect to the Internet with such a modem you of course need an ISP.
We strongly recommend using   wvdial
(http://linmodems.technion.ac.il/wvdial.html)  at least until everything
works, rather than more attractive but less informative diallers such as
Kppp and the like.

Best regards
Jacques

Ilan Tal wrote:
It keeps bouncing - what a pain this is....

---------- Forwarded message ----------
From: Ilan Tal <ilan.tal@xxxxxxxxx>
Date: Sun, Dec 14, 2008 at 7:33 PM
Subject: Fwd: need help for modem
To: discuss <discuss@xxxxxxxxxxxxx>


It bounced for some strange reason - so I made modem.txt actual text

---------- Forwarded message ----------
From: Ilan Tal <ilan.tal@xxxxxxxxx>
Date: Sun, Dec 14, 2008 at 7:29 PM
Subject: Fwd: need help for modem
To: Discuss@xxxxxxxxxxxxx


I wrote this a few days ago and no one has answered.
Did it arrive?
Does anyone know if I have a modem, or just think I do?

Thanks,
Ilan

---------- Forwarded message ----------
From: Ilan Tal <ilan.tal@xxxxxxxxx>
Date: Fri, Dec 12, 2008 at 12:58 PM
Subject: need help for modem
To: discuss-subscribe@xxxxxxxxxxxxx


I've got a modem on my laptop, but I don't know if it is detected or
not. First I thought it may be ALSA, but that reports no modem.
I'm doing this for a friend where I installed Ubuntu 8.10, but he needs
to dial up to the Internet (for the moment, at least).
If I can learn on my laptop, maybe I can help him.

So I need 2 things:
1) what modem do I have, and does it need a driver?
2) how do I do the dialup to the Internet?

Attached is the modem.txt from scanModem.
Thanks,
Ilan



 Only plain text email is forwarded by the  Discuss@xxxxxxxxxxxxx List
Server,
 as HTML can contain viruses. Use as the email Subject Line:
          YourName, YourCountry  kernel 2.6.27-9-generic

 With this Subject Line cogent experts will be alerted, and useful
case names left in the Archive.
 YourCountry will enable Country specific guidance. Linux experts in
YourCountry
 can be found through: http://www.linux.org/groups/index.html.

They will know your Country's modem code, which may be essential for
dialup service.
Responses from Discuss@xxxxxxxxxxxxx are sometimes blocked by an
Internet Provider mail filters.
 So in a day, also check the Archived responses at
http://www.linmodems.org

--------------------------  System information
----------------------------
CPU=i686,
Linux version 2.6.27-9-generic (buildd@rothera) (gcc version 4.3.2
(Ubuntu 4.3.2-1ubuntu11) ) #1 SMP Thu Nov 20 21:57:00 UTC 2008

 scanModem update of:  2008_11_06

 There are no blacklisted modem drivers in /etc/modprobe*  files
Attached USB devices are:
 ID 1d6b:0002 Linux Foundation 2.0 root hub
 ID 0c45:62c0 Microdia Pavilion Webcam

 ID 1d6b:0002 Linux Foundation 2.0 root hub
 ID 1d6b:0001 Linux Foundation 1.1 root hub
 ID 1d6b:0001 Linux Foundation 1.1 root hub
 ID 045e:0084 Microsoft Corp. Basic Optical Mouse
 ID 1d6b:0001 Linux Foundation 1.1 root hub

 ID 1d6b:0001 Linux Foundation 1.1 root hub
 ID 1d6b:0001 Linux Foundation 1.1 root hub

USB modems not recognized

For candidate card in slot 00:1b.0, firmware information and bootup
diagnostics are:
 PCI slot       PCI ID          SubsystemID     Name

 ----------     ---------       ---------       --------------
 00:1b.0        8086:284b       1462:3fea       Audio device: Intel
Corporation 82801H

 Modem interrupt assignment and sharing:
 21:        885        807   IO-APIC-fasteoi   uhci_hcd:usb2, HDA Intel

 --- Bootup diagnostics for card in PCI slot 00:1b.0 ----
[    0.552300] PCI: 0000:00:1b.0 reg 10 64bit mmio: [f9ff8000, f9ffbfff]
[    0.552362] pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold
[    0.552367] pci 0000:00:1b.0: PME# disabled

[   13.149926] HDA Intel 0000:00:1b.0: PCI INT A -> GSI 21 (level,
low) -> IRQ 21
[   13.149952] HDA Intel 0000:00:1b.0: setting latency timer to 64

 The PCI slot 00:1b.0 of the modem card may be disabled early in

 a bootup process,  but then enabled later. If modem drivers load
 but the  modem is not responsive, read DOCs/Bootup.txt about possible
fixes.
 Send dmesg.txt along with ModemData.txt to discuss@xxxxxxxxxxxxx

 if help is needed.



===== Advanced Linux Sound Architecture (ALSA) diagnostics =====
The ALSA packages provide audio support and also drivers for some modems.
ALSA diagnostics are written during bootup to /proc/asound/ folders.


The ALSA verion is 1.0.17
The modem cards detected by "aplay -l"  are: None


The /proc/asound/pcm file reports:
-----------------------
00-02: ALC888 Analog : ALC888 Analog : capture 1

00-01: ALC888 Digital : ALC888 Digital : playback 1
00-00: ALC888 Analog : ALC888 Analog : playback 1 : capture 1

about /proc/asound/cards:
------------------------
 0 [Intel          ]: HDA-Intel - HDA Intel

                     HDA Intel at 0xf9ff8000 irq 21

 PCI slot 00:1b.0 has a High Definition Audio Card
 The drivers are in the kernel modules tree at:
 /lib/modules/2.6.27-9-generic/kernel/sound/pci/hda/snd-hda-intel.ko

/lib/modules/2.6.27-7-generic/kernel/sound/pci/hda/snd-hda-intel.ko
 The modem codec file for the HDA card is: /proc/asound/card0/codec#1
--------------------------------------------------------
Codec: LSI ID 1040

Address: 1
Vendor Id: 0x11c11040
Subsystem Id: 0x11c10001
Revision Id: 0x100200
Modem Function Group: 0x1

 The audio card hosts a softmodem chip:  0x11c11040
If not a Conexant modem, the driver
agrmodem+agrserial+patched_snd-hda-intel with its dependent drivers:


----------
provide audio + modem support with the modem chip residing on the
subsystem.
Any particular card can host any one of several soft modem chips.

=== Finished firmware and bootup diagnostics, next deducing cogent
software. ===


Predictive  diagnostics for card in bus 00:1b.0:
       Modem chipset  detected on
NAME="Audio device: Intel Corporation 82801H "
CLASS=0403
PCIDEV=8086:284b
SUBSYS=1462:3fea
IRQ=21
HDA=8086:284b

SOFT=8086:284b.HDA
CHIP=0x11c11040
IDENT=11c11040
Driver=agrmodem+agrserial+patched_snd-hda-intel

 For candidate modem in:  00:1b.0
  0403 Audio device: Intel Corporation 82801H
     Primary device ID:  8086:284b

   Subsystem PCI_id  1462:3fea
   Softmodem codec or chipset from diagnostics: 0x11c11040
                              from    Archives:
                       The HDA card softmodem chip is 0x11c11040



Support type needed or chipset: 11c11040

----------------end Softmodem section --------------

Writing DOCs/Intel.txt

 Vendor 11c1 is Lucent Technologies with modem technology now under LSI
Inc.

Their Linux  code developer/maintainer is Soumyendu Sarkar. Support
for a chipset and its
 continued maintenance is only initiated at the request of a major
chipset buyer,
 or comparable sponsor. Several different  modem chipset types  are
produced:

 with varying support under Linux.
 Device ID   Support        Name           Comment
 ---------   -------------  -----------    -----------------------------
 0480        serial_drivers Venus           controller chipset 1673JV7

 0440-045d   martian        Mars/Apollo     DSP (digital signal
processing) chipsets
 0462        none           56K.V90/ADSL Wildwire
 048d none                  SV2P            soft modem
 048(c or f) AGRSM          SV2P            soft modem

 0600        none           soft modem, very few in the field.
 0620        AGRSM          Pinball  soft modem, in some HP desktop PCs
 011c11040   AGRSM          hosted on High Definition Audio cards
 062(1-3)    none           SV92PP,Pinball  soft modem, in some HP desktop
PCs


martian - At
http://linmodems.technion.ac.il/packages/ltmodem/kernel-2.6/martian/
AGRSM - At http://linmodems.technion.ac.il/packages/ltmodem/11c11040/

 Compiling resources for a driver module pair: agrmodem.ko + agrserial.ko
 Use the  agrsm-HDA-20080721-ALSA15.tar.bz2 or agrsm-HDA-20080721.tar.bz2
 Read the agrsm_howto.txt.  For 11c11040 chips, also the
HOWTO-Agere-11c11040-HDA.html


-------------- end Agere Systems section -------------------

 Completed candidate modem analyses.

 The base of the UDEV device file system is: /dev/.udev

 Versions adequately match for the compiler installed: 4.3.2

            and the compiler used in kernel assembly: 4.3.2



 Minimal compiling resources appear complete:
  make utility - /usr/bin/make
  Compiler version 4.3
  linuc_headers base folder /lib/modules/2.6.27-9-generic/build


 However some compilations and executable functions may need additional
files,
 in the FileNames.h (so called kernel "h"eaders) collection installed
in  /usr/include/ .
 For martian_modem, additional required packages are needed. The also
required headers of package libc6 are commonly installed by default.

 Compiling hsfmodem drivers does require linux-libc-dev and libc6-dev
packages, for kernels 2.6.24 and later versions.
 In not included on your install CD, search for them at
http://packages.ubuntu.com

 or comparable Repository for other Linux distros.
 When compiling ALSA drivers, the utility "patch" will also be needed.




If a driver compilation fails, with message including some lack of
some FileName.h (stdio.h for example), then

Some additional kernel-header files need installation to /usr/include.
The minimal additional packages are libc6-dev
and any of its dependents, under Ubuntu linux-libc-dev

If an alternate ethernet connection is available,

$  apt-get update
$  apt-get -s install linux-kernel-devel
will install needed packages.
For Debian/Ubuntu related distributions, run the following command to
display the needed package list:

Otherwise packages have to be found through http://packages.ubuntu.com

Once downloaded and transferred into a Linux partition,
they can be installed alltogether with:
$ sudo dpkg -i *.deb

Checking settings of:   /etc/ppp/options
asyncmap 0
noauth
crtscts
lock
hide-password

modem
proxyarp
lcp-echo-interval 30
lcp-echo-failure 4
noipx

In case of a message like:
  Warning: Could not modify /etc/ppp/pap-secrets: Permission denied
see http://linmodems.technion.ac.il/bigarch/archive-sixth/msg04656.html


Read Modem/DOCs/YourSystem.txt concerning other COMM channels: eth0
wlan0 wmaster0
Which can interfere with Browser naviagation.

 Don't worry about the following, it is for experts should trouble
shooting be necessary.

==========================================================

 Checking for modem support lines:
 --------------------------------------
    /device/modem symbolic link:
slmodemd created symbolic link /dev/ttySL0:

    Within /etc/udev/ files:

    Within /etc/modprobe.conf files:
/etc/modprobe.d/blacklist-modem:# Uncomment these entries in order to
blacklist unwanted modem drivers
/etc/modprobe.d/blacklist-modem:# blacklist snd-atiixp-modem

/etc/modprobe.d/blacklist-modem:# blacklist snd-via82xx-modem
/etc/modprobe.d/alsa-base:options snd-atiixp-modem index=-2
/etc/modprobe.d/alsa-base:options snd-via82xx-modem index=-2
    Within any ancient /etc/devfs files:


    Within ancient kernel 2.4.n /etc/module.conf files:

--------- end modem support lines --------

[Index of Archives]     [Linux Media Development]     [Asterisk]     [DCCP]     [Netdev]     [X.org]     [Xfree86]     [Fedora Women]     [Linux USB]

  Powered by Linux