Try to read here a bit: http://www20.brinkster.com/olivares/slmodemd-setup-1.html Add a line to /etc/modprobe.conf first install slamr modprobe --ignore-install ungrab-winmodem ; modprobe--ignore-install slamr; test -e /dev/slamr0 || (/bin/mknod -m 660/dev/slamr0 c 242 0 2>/dev/null && chgrp uucp /dev/slamr0) as a whole line no spaces, otherwise you will see error message. Modify start{procedure to add the following: /* start() procedure from slmodemd script /etc/rc.d/init.d/slmodemdstart() { modprobe ungrab-winmodem <=== add this and modprobe slamr <=== this echo -n "Starting SmartLink Modem driver for $SLMODEMD_DEVICE: " $prog /dev/null 2>/dev/null \ --country=$SLMODEMD_COUNTRY $SLMODEMD_OPTS /dev/$SLMODEMD_DEVICE & RETVAL=$? [ $RETVAL -eq 0 ] && success $"$prog startup" || failure$"$prog startup" echo [ $RETVAL -eq 0 ] && touch /var/lock/subsys/$prog return $RETVAL} Otherwise might be that this is chipset is not supported by slamr driver? Regards, Antonio On 12/6/08, hogat allah shahamiri <hogat_allah_sh@xxxxxxxxx> wrote:> i act this but befor see this please> -----> [root@localhost ~]#gedit /etc/rc.modules ------> I insert to it> modprobe slamr> [root@localhost ~]#cd /root/Desktop/m/slmodem-2.9.11-20080126> #[root@localhost /root/Desktop/m/slmodem-2.9.11-20080126]cp scripts/slmodemd> /etc/init.d/> [root@localhost ~]# chkconfig -- add slmodemd> chkconfig version 1.3.34 - Copyright (C) 1997-2000 Red Hat, Inc.> This may be freely redistributed under the terms of the GNU Public License.>> usage: chkconfig --list [name]> chkconfig --add <name>> chkconfig --del <name>> chkconfig --override <name>> chkconfig [--level <levels>] <name> <on|off|reset|resetpriorities>> [root@localhost ~]# chkconfig slmodemd on> [root@localhost ~]# service slmodemd start> Starting SmartLink Modem driver for slamr0: [ OK ]> [root@localhost ~]#> ---------------->> [root@localhost ~]# modprobe ungrab-winmodem> [root@localhost ~]# modprobe slamr> [root@localhost ~]# /usr/sbin/slmodemd --country=USA /dev/slamr0> error: mdm setup: cannot stat `/dev/slamr0': No such file or directory> error: cannot setup device `/dev/slamr0'> [root@localhost ~]# dmesg | grep slamr> slamr: module license 'Smart Link Ltd.' taints kernel.> slamr: SmartLink AMRMO modem.> slamr: probe 2000:2800 ï؟½\$ ï؟½ï؟½ï؟½ï؟½ï؟½ï؟½t$ ï؟½|$ ï؟½ï؟½ ï؟½ï؟½G 0> card...> slamr: cannot create card.> slamr: probe of 0000:04:01.0 failed with error -12> [root@localhost ~]#>> ---------------> what is your opinion> regard>>> --- On Sat, 6/12/08, Antonio Olivares <olivares14031@xxxxxxxxx> wrote:>>> From: Antonio Olivares <olivares14031@xxxxxxxxx>>> Subject: Re: my modem is smartHCF or smart link ltd how install it on>> fedora7 and fedora9?>> To: hogat_allah_sh@xxxxxxxxx>> Cc: discuss@xxxxxxxxxxxxx, marvin.stodolsky@xxxxxxxxx>> Date: Saturday, 6 December, 2008, 6:22 PM>> Hogat,>>>> First login as a regular user, then open a terminal and try>> the commands:>>>> $ su ->> passwd:>> # modprobe ungrab-winmodem>> # modprobe slamr>> # slmodemd -c USA /dev/slamr0>>>> if last step fails try putting in>> # mknod -m 600 /dev/slamr0 c 242 0>> then this one again>> # slmodemd -c USA /dev/slamr0>>>> Should you run into trouble, please write and show us your>> steps to fix this.>>>> Regards,>>>> Antonio>>>> On Sat, Dec 6, 2008 at 2:12 AM, hogat allah shahamiri>> <hogat_allah_sh@xxxxxxxxx> wrote:>> > hi>> > i am now and at first login as root user>> > and this resault of your code:>> >>> > [root@localhost ~]# exit ---> terminal>> closed .>> > [root@localhost ~]# su ->> > [root@localhost ~]# modprobe ungrab-winmodem>> > [root@localhost ~]# modprobe slamr>> > [root@localhost ~]# /usr/sbin/slmodemd --country=USA>> /dev/slamr0>> > error: mdm setup: cannot stat `/dev/slamr0': No>> such file or directory>> > error: cannot setup device `/dev/slamr0'>> > [root@localhost ~]#>> > --------------with other user>> > [ommat@localhost ~]$ su ->> > Password:>> > [root@localhost ~]# modprobe ungrab-winmodem>> > [root@localhost ~]# modprobe slamr>> > [root@localhost ~]# /usr/sbin/slmodemd --country=USA>> /dev/slamr0>> > error: mdm setup: cannot stat `/dev/slamr0': No>> such file or directory>> > error: cannot setup device `/dev/slamr0'>> > [root@localhost ~]#>> > -------------->> > now what i would doing?>> > thanks>> > hogat.>> >>> >>> >>> >>> >>> >> type exit>> >> and then you get back to $>> >> then>> >> $ su ->> >> password:>> >> # modprobe ungrab-winmodem>> >> # modprobe slamr>> >> then do>> >> # /usr/sbin/slmodemd --country=USA /dev/slamr0>> >>>> >> You should get it working.>> >>>> >> Regards,>> >>> >>> >>> > New Email addresses available on Yahoo!>> > Get the Email name you've always wanted on the new>> @ymail and @rocketmail.>> > Hurry before someone else does!>> > http://mail.promotions.yahoo.com/newdomains/aa/>> >>> >>>> New Email names for you!> Get the Email name you've always wanted on the new @ymail and> @rocketmail.> Hurry before someone else does!> http://mail.promotions.yahoo.com/newdomains/aa/>>
