fs, I feel bad, but no support for this modem : Under Linux 2.6.n kernels, the chipset is NOT SUPPORTED . Read DOCs/InfoGeneral.txt about alternatives. Regards, Antonio --- On Fri, 12/5/08, fs <fsk.free@xxxxxxx> wrote: > From: fs <fsk.free@xxxxxxx> > Subject: Communication controller: 3Com Corporation Mini PCI 56k Winmodem > To: discuss@xxxxxxxxxxxxx > Date: Friday, December 5, 2008, 5:23 AM > Hi, > is there any help possible ? > I'm using a note book Dell Latitude Pentium III but the > dialup modem 3Com Corporation Mini PCI 56k Winmodem is not > recognized .... !! > Thank's a lot > > beelow : ModemData.txt and dmesg.txt > > *ModemData.txt* > ------------------------------------------------------------------------ > Only plain text email is forwarded by the > Discuss@xxxxxxxxxxxxx List Server, > as HTML can contain viruses. Use as the email Subject Line: > YourName, YourCountry kernel 2.6.27-7-generic > With this Subject Line cogent experts will be alerted, and > useful case names left in the Archive. > YourCountry will enable Country specific guidance. Linux > experts in YourCountry > can be found through: > http://www.linux.org/groups/index.html. > They will know your Country's modem code, which may be > essential for dialup service. > Responses from Discuss@xxxxxxxxxxxxx are sometimes blocked > by an Internet Provider mail filters. > So in a day, also check the Archived responses at > http://www.linmodems.org > -------------------------- System information > ---------------------------- > CPU=i686, Linux version 2.6.27-7-generic (buildd@rothera) > (gcc version 4.3.2 (Ubuntu 4.3.2-1ubuntu10) ) #1 SMP Fri Oct > 24 06:42:44 UTC 2008 > scanModem update of: 2008_11_06 > > There are no blacklisted modem drivers in /etc/modprobe* > files > Attached USB devices are: > ID 090c:1000 Feiya Technology Corp. Memory Bar > ID 1d6b:0001 Linux Foundation 1.1 root hub > > USB modems not recognized > > For candidate card in slot 02:06.1, firmware information > and bootup diagnostics are: > PCI slot PCI ID SubsystemID Name > ---------- --------- --------- -------------- > 02:06.1 10b7:1007 10b7:615b Communication > controller: 3Com Corporation Mini PCI 56k Winmodem > > Modem interrupt assignment and sharing: > 10: 2736 XT-PIC-XT ohci1394, uhci_hcd:usb1, > yenta, yenta, eth0 > --- Bootup diagnostics for card in PCI slot 02:06.1 ---- > [ 0.826963] PCI: 0000:02:06.1 reg 10 io port: [e400, > e4ff] > [ 0.826973] PCI: 0000:02:06.1 reg 14 32bit mmio: > [f8ffd400, f8ffd4ff] > [ 0.826984] PCI: 0000:02:06.1 reg 18 32bit mmio: > [f8ffd000, f8ffd07f] > [ 0.827021] pci 0000:02:06.1: supports D2 > [ 0.827025] pci 0000:02:06.1: PME# supported from D2 > D3hot D3cold > [ 0.827032] pci 0000:02:06.1: PME# disabled > > The PCI slot 02:06.1 of the modem card may be disabled > early in > a bootup process, but then enabled later. If modem drivers > load > but the modem is not responsive, read DOCs/Bootup.txt > about possible fixes. > Send dmesg.txt along with ModemData.txt to > discuss@xxxxxxxxxxxxx > if help is needed. > > > === Finished firmware and bootup diagnostics, next deducing > cogent software. === > > Predictive diagnostics for card in bus 02:06.1: > Modem chipset detected on > NAME="Communication controller: 3Com Corporation Mini > PCI 56k Winmodem " > CLASS=0780 > PCIDEV=10b7:1007 > SUBSYS=10b7:615b > IRQ=10 > IDENT=3COM.winmodem > > For candidate modem in: 02:06.1 > 0780 Communication controller: 3Com Corporation Mini PCI > 56k Winmodem > Primary device ID: 10b7:1007 > Support type needed or chipset: 3COM.winmodem > Under Linux 2.6.n kernels, the chipset is NOT SUPPORTED . > Read DOCs/InfoGeneral.txt about alternatives. > > ----------------end Softmodem section -------------- > Vendor 10b7 3COM Inc. purchased the vendor 12b9 US Robotics > modem technology. > Their winmodems have no Linux support. Their controller > chipset modems > are supported by the Linux serial drivers. > The PCI id 10b7:1007 modem is Not_Supported. > > PCI ID Name > Support status > ------------------------------------------------------------------------------- > 10b7:1006 3COM 0038TA AC101 - TF Mini-PCI > winmodem, not supported > 10b7:1007 3COM 3C556 V.90 Mini-PCI winmodem, not > supported > 12b9:1006 US Robotics 3cp803598 Voice winmodem, > not supported > 12b9:1007 US Robotics ERL3263A-0 DF GWPCI PC99 > winmodem, not supported > > 12b9:0062 US Robotics erk41926a-0.6 usr 56k serial > driver supported > 12b9:1008 US Robotics 3cp803598 > serial driver supported > ====== end 3COM section ======= > > Completed candidate modem analyses. > > The base of the UDEV device file system is: /dev/.udev > > Versions adequately match for the compiler installed: 4.3.2 > and the compiler used in kernel assembly: 4.3.2 > > > > Minimal compiling resources appear complete: > make utility - /usr/bin/make > Compiler version 4.3 > linuc_headers base folder > /lib/modules/2.6.27-7-generic/build > > However some compilations and executable functions may need > additional files, > in the FileNames.h (so called kernel "h"eaders) > collection installed in /usr/include/ . > For martian_modem, additional required packages are needed. > The also required headers of package libc6 are commonly > installed by default. > Compiling hsfmodem drivers does require linux-libc-dev and > libc6-dev packages, for kernels 2.6.24 and later versions. > In not included on your install CD, search for them at > http://packages.ubuntu.com > or comparable Repository for other Linux distros. > When compiling ALSA drivers, the utility "patch" > will also be needed. > > > > > If a driver compilation fails, with message including some > lack of some FileName.h (stdio.h for example), then > Some additional kernel-header files need installation to > /usr/include. The minimal additional packages are libc6-dev > and any of its dependents, under Ubuntu linux-libc-dev > > If an alternate ethernet connection is available, > $ apt-get update > $ apt-get -s install linux-kernel-devel > will install needed packages. > For Debian/Ubuntu related distributions, run the following > command to display the needed package list: > > Otherwise packages have to be found through > http://packages.ubuntu.com > Once downloaded and transferred into a Linux partition, > they can be installed alltogether with: > $ sudo dpkg -i *.deb > > Checking settings of: /etc/ppp/options > asyncmap 0 > noauth > crtscts > lock > hide-password > modem > proxyarp > lcp-echo-interval 30 > lcp-echo-failure 4 > noipx > > In case of a message like: > Warning: Could not modify /etc/ppp/pap-secrets: > Permission denied > see > http://linmodems.technion.ac.il/bigarch/archive-sixth/msg04656.html > > Read Modem/DOCs/YourSystem.txt concerning other COMM > channels: eth0 > Which can interfere with Browser naviagation. > > Don't worry about the following, it is for experts > should trouble shooting be necessary. > ========================================================== > > Checking for modem support lines: > -------------------------------------- > /device/modem symbolic link: slmodemd created symbolic > link /dev/ttySL0: Within /etc/udev/ files: > > Within /etc/modprobe.conf files: > /etc/modprobe.d/alsa-base:options snd-atiixp-modem index=-2 > /etc/modprobe.d/alsa-base:options snd-via82xx-modem > index=-2 > /etc/modprobe.d/blacklist-modem:# Uncomment these entries > in order to blacklist unwanted modem drivers > /etc/modprobe.d/blacklist-modem:# blacklist > snd-atiixp-modem > /etc/modprobe.d/blacklist-modem:# blacklist > snd-via82xx-modem > Within any ancient /etc/devfs files: > > Within ancient kernel 2.4.n /etc/module.conf files: > > --------- end modem support lines -------- > > ------------------------------------------------------------------------ > *dmesg.txt* > ------------------------------------------------------------------------ > CPU0 > 0: 66836 XT-PIC-XT timer > 1: 80 XT-PIC-XT i8042 > 2: 0 XT-PIC-XT cascade > 3: 3 XT-PIC-XT 4: 6 XT-PIC-XT > 5: 564 XT-PIC-XT Maestro3 > 7: 1 XT-PIC-XT parport0 > 8: 2 XT-PIC-XT rtc0 > 9: 1 XT-PIC-XT acpi > 10: 2736 XT-PIC-XT ohci1394, uhci_hcd:usb1, > yenta, yenta, eth0 > 11: 4 XT-PIC-XT 12: 156483 XT-PIC-XT > i8042 > 14: 28876 XT-PIC-XT ata_piix > 15: 0 XT-PIC-XT ata_piix > NMI: 0 Non-maskable interrupts > LOC: 0 Local timer interrupts > RES: 0 Rescheduling interrupts > CAL: 0 function call interrupts > TLB: 0 TLB shootdowns > SPU: 0 Spurious interrupts > ERR: 0 > MIS: 0 > > [ 0.000000] Initializing cgroup subsys cpuset > [ 0.000000] Initializing cgroup subsys cpu > [ 0.000000] Linux version 2.6.27-7-generic > (buildd@rothera) (gcc version 4.3.2 (Ubuntu 4.3.2-1ubuntu10) > ) #1 SMP Fri Oct 24 06:42:44 UTC 2008 (Ubuntu > 2.6.27-7.14-generic) > [ 0.000000] BIOS-provided physical RAM map: > [ 0.000000] BIOS-e820: 0000000000000000 - > 000000000009fc00 (usable) > [ 0.000000] BIOS-e820: 000000000009fc00 - > 00000000000a0000 (reserved) > [ 0.000000] BIOS-e820: 0000000000100000 - > 000000000ffea800 (usable) > [ 0.000000] BIOS-e820: 000000000ffea800 - > 0000000010000000 (reserved) > [ 0.000000] BIOS-e820: 00000000feea0000 - > 00000000fef00000 (reserved) > [ 0.000000] BIOS-e820: 00000000ffb80000 - > 0000000100000000 (reserved) > [ 0.000000] last_pfn = 0xffea max_arch_pfn = 0x100000 > [ 0.000000] kernel direct mapping tables up to ffea000 @ > 7000-d000 > [ 0.000000] RAMDISK: 0f810000 - 0ffda4d9 > [ 0.000000] DMI 2.3 present. > [ 0.000000] ACPI: RSDP 000FDE50, 0014 (r0 DELL ) > [ 0.000000] ACPI: RSDT 000FDE64, 0028 (r1 DELL CPi R > 27D1090D ASL 61) > [ 0.000000] ACPI: FACP 000FDE90, 0074 (r1 DELL CPi R > 27D1090D ASL 61) > [ 0.000000] ACPI: DSDT FFFE4000, 2BB7 (r1 INT430 > SYSFexxx 1001 MSFT 100000D) > [ 0.000000] ACPI: FACS 0FFFF800, 0040 > [ 0.000000] 0MB HIGHMEM available. > [ 0.000000] 255MB LOWMEM available. > [ 0.000000] mapped low ram: 0 - 0ffea000 > [ 0.000000] low ram: 00000000 - 0ffea000 > [ 0.000000] bootmap 00002000 - 00004000 > [ 0.000000] (9 early reservations) ==> bootmem > [0000000000 - 000ffea000] > [ 0.000000] #0 [0000000000 - 0000001000] BIOS data > page ==> [0000000000 - 0000001000] > [ 0.000000] #1 [0000001000 - 0000002000] EX > TRAMPOLINE ==> [0000001000 - 0000002000] > [ 0.000000] #2 [0000006000 - 0000007000] > TRAMPOLINE ==> [0000006000 - 0000007000] > [ 0.000000] #3 [0000100000 - 00005c0a20] TEXT DATA > BSS ==> [0000100000 - 00005c0a20] > [ 0.000000] #4 [000f810000 - 000ffda4d9] > RAMDISK ==> [000f810000 - 000ffda4d9] > [ 0.000000] #5 [00005c1000 - 00005c4000] > INIT_PG_TABLE ==> [00005c1000 - 00005c4000] > [ 0.000000] #6 [000009fc00 - 0000100000] BIOS > reserved ==> [000009fc00 - 0000100000] > [ 0.000000] #7 [0000007000 - 0000009000] > PGTABLE ==> [0000007000 - 0000009000] > [ 0.000000] #8 [0000002000 - 0000004000] > BOOTMAP ==> [0000002000 - 0000004000] > [ 0.000000] Zone PFN ranges: > [ 0.000000] DMA 0x00000000 -> 0x00001000 > [ 0.000000] Normal 0x00001000 -> 0x0000ffea > [ 0.000000] HighMem 0x0000ffea -> 0x0000ffea > [ 0.000000] Movable zone start PFN for each node > [ 0.000000] early_node_map[2] active PFN ranges > [ 0.000000] 0: 0x00000000 -> 0x0000009f > [ 0.000000] 0: 0x00000100 -> 0x0000ffea > [ 0.000000] On node 0 totalpages: 65417 > [ 0.000000] free_area_init_node: node 0, pgdat c048a500, > node_mem_map c1000000 > [ 0.000000] DMA zone: 3963 pages, LIFO batch:0 > [ 0.000000] Normal zone: 60878 pages, LIFO batch:15 > [ 0.000000] ACPI: PM-Timer IO Port: 0x808 > [ 0.000000] SMP: Allowing 1 CPUs, 0 hotplug CPUs > [ 0.000000] Local APIC disabled by BIOS -- you can > enable it with "lapic" > [ 0.000000] mapped APIC to ffffb000 (01241000) > [ 0.000000] PM: Registered nosave memory: > 000000000009f000 - 00000000000a0000 > [ 0.000000] PM: Registered nosave memory: > 00000000000a0000 - 0000000000100000 > [ 0.000000] Allocating PCI resources starting at > 20000000 (gap: 10000000:eeea0000) > [ 0.000000] PERCPU: Allocating 41628 bytes of per cpu > data > [ 0.000000] NR_CPUS: 64, nr_cpu_ids: 1, nr_node_ids 1 > [ 0.000000] Built 1 zonelists in Zone order, mobility > grouping on. Total pages: 64841 > [ 0.000000] Kernel command line: > root=UUID=59bee0e4-ea08-443f-888a-53fe8182fa3a ro quiet > splash > [ 0.000000] Enabling fast FPU save and restore... done. > [ 0.000000] Enabling unmasked SIMD FPU exception > support... done. > [ 0.000000] Initializing CPU#0 > [ 0.000000] PID hash table entries: 1024 (order: 10, > 4096 bytes) > [ 0.000000] TSC: PIT calibration confirmed by PMTIMER. > [ 0.000000] TSC: using PMTIMER calibration value > [ 0.000000] Detected 1129.563 MHz processor. > [ 0.004000] Console: colour VGA+ 80x25 > [ 0.004000] console [tty0] enabled > [ 0.004000] Dentry cache hash table entries: 32768 > (order: 5, 131072 bytes) > [ 0.004000] Inode-cache hash table entries: 16384 > (order: 4, 65536 bytes) > [ 0.004000] Memory: 246084k/262056k available (2572k > kernel code, 15456k reserved, 1160k data, 424k init, 0k > highmem) > [ 0.004000] virtual kernel memory layout: > [ 0.004000] fixmap : 0xffc77000 - 0xfffff000 > (3616 kB) > [ 0.004000] pkmap : 0xff400000 - 0xff800000 > (4096 kB) > [ 0.004000] vmalloc : 0xd0800000 - 0xff3fe000 ( > 747 MB) > [ 0.004000] lowmem : 0xc0000000 - 0xcffea000 ( > 255 MB) > [ 0.004000] .init : 0xc04ab000 - 0xc0515000 ( > 424 kB) > [ 0.004000] .data : 0xc038329a - 0xc04a5680 > (1160 kB) > [ 0.004000] .text : 0xc0100000 - 0xc038329a > (2572 kB) > [ 0.004000] Checking if this processor honours the WP > bit even in supervisor mode...Ok. > [ 0.004000] CPA: page pool initialized 1 of 1 pages > preallocated > [ 0.004000] SLUB: Genslabs=12, HWalign=32, Order=0-3, > MinObjects=0, CPUs=1, Nodes=1 > [ 0.004018] Calibrating delay loop (skipped), value > calculated using timer frequency.. 2259.12 BogoMIPS > (lpj=4518252) > [ 0.004058] Security Framework initialized > [ 0.004075] SELinux: Disabled at boot. > [ 0.004123] AppArmor: AppArmor initialized > [ 0.004140] Mount-cache hash table entries: 512 > [ 0.004466] Initializing cgroup subsys ns > [ 0.004475] Initializing cgroup subsys cpuacct > [ 0.004481] Initializing cgroup subsys memory > [ 0.004512] CPU: L1 I cache: 16K, L1 D cache: 16K > [ 0.004518] CPU: L2 cache: 512K > [ 0.004544] Checking 'hlt' instruction... OK. > [ 0.020672] SMP alternatives: switching to UP code > [ 0.028022] Freeing SMP alternatives: 11k freed > [ 0.028029] ACPI: Core revision 20080609 > [ 0.043437] ACPI: Checking initramfs for custom DSDT > [ 0.657881] ACPI: setting ELCR to 0200 (from 0c20) > [ 0.659162] weird, boot CPU (#0) not listedby the BIOS. > [ 0.659168] SMP motherboard not detected. > [ 0.659174] Local APIC not detected. Using dummy APIC > emulation. > [ 0.659179] SMP disabled > [ 0.659331] Brought up 1 CPUs > [ 0.659336] Total of 1 processors activated (2259.12 > BogoMIPS). > [ 0.659361] CPU0 attaching sched-domain: > [ 0.659368] domain 0: span 0 level CPU > [ 0.659374] groups: 0 > [ 0.659905] net_namespace: 840 bytes > [ 0.659930] Booting paravirtualized kernel on bare > hardware > [ 0.660408] Time: 11:33:53 Date: 12/04/08 > [ 0.660474] NET: Registered protocol family 16 > [ 0.661215] EISA bus registered > [ 0.661245] ACPI: bus type pci registered > [ 0.684204] PCI: PCI BIOS revision 2.10 entry at > 0xfc06e, last bus=2 > [ 0.684212] PCI: Using configuration type 1 for base > access > [ 0.687379] ACPI: EC: Look up EC in DSDT > [ 0.752084] ACPI: Interpreter enabled > [ 0.752092] ACPI: (supports S0 S1 S3 S4 S5) > [ 0.752128] ACPI: Using PIC for interrupt routing > [ 0.826060] ACPI: PCI Root Bridge [PCI0] (0000:00) > [ 0.826213] PCI: 0000:00:00.0 reg 10 32bit mmio: > [e8000000, ebffffff] > [ 0.826404] pci 0000:00:1f.0: quirk: region 0800-087f > claimed by ICH4 ACPI/GPIO/TCO > [ 0.826412] pci 0000:00:1f.0: quirk: region 0880-08bf > claimed by ICH4 GPIO > [ 0.826458] PCI: 0000:00:1f.1 reg 20 io port: [bfa0, > bfaf] > [ 0.826525] PCI: 0000:00:1f.2 reg 20 io port: [dce0, > dcff] > [ 0.826592] PCI: 0000:01:00.0 reg 10 32bit mmio: > [fc000000, fcffffff] > [ 0.826602] PCI: 0000:01:00.0 reg 14 32bit mmio: > [e0000000, e7ffffff] > [ 0.826627] PCI: 0000:01:00.0 reg 30 32bit mmio: [0, > ffff] > [ 0.826682] PCI: bridge 0000:00:01.0 io port: [c000, > cfff] > [ 0.826689] PCI: bridge 0000:00:01.0 32bit mmio: > [fc000000, fdffffff] > [ 0.826696] PCI: bridge 0000:00:01.0 32bit mmio pref: > [e0000000, e7ffffff] > [ 0.826743] PCI: 0000:02:03.0 reg 10 io port: [ec00, > ecff] > [ 0.826754] PCI: 0000:02:03.0 reg 14 32bit mmio: > [f8ffe000, f8ffffff] > [ 0.826800] pci 0000:02:03.0: supports D1 > [ 0.826804] pci 0000:02:03.0: supports D2 > [ 0.826810] pci 0000:02:03.0: PME# supported from D1 D2 > D3hot > [ 0.826817] pci 0000:02:03.0: PME# disabled > [ 0.826852] PCI: 0000:02:06.0 reg 10 io port: [e800, > e8ff] > [ 0.826862] PCI: 0000:02:06.0 reg 14 32bit mmio: > [f8ffdc00, f8ffdc7f] > [ 0.826873] PCI: 0000:02:06.0 reg 18 32bit mmio: > [f8ffd800, f8ffd87f] > [ 0.826897] PCI: 0000:02:06.0 reg 30 32bit mmio: > [f9000000, f901ffff] > [ 0.826915] pci 0000:02:06.0: supports D1 > [ 0.826919] pci 0000:02:06.0: supports D2 > [ 0.826923] pci 0000:02:06.0: PME# supported from D1 D2 > D3hot D3cold > [ 0.826931] pci 0000:02:06.0: PME# disabled > [ 0.826963] PCI: 0000:02:06.1 reg 10 io port: [e400, > e4ff] > [ 0.826973] PCI: 0000:02:06.1 reg 14 32bit mmio: > [f8ffd400, f8ffd4ff] > [ 0.826984] PCI: 0000:02:06.1 reg 18 32bit mmio: > [f8ffd000, f8ffd07f] > [ 0.827021] pci 0000:02:06.1: supports D2 > [ 0.827025] pci 0000:02:06.1: PME# supported from D2 > D3hot D3cold > [ 0.827032] pci 0000:02:06.1: PME# disabled > [ 0.827084] PCI: 0000:02:0f.0 reg 10 32bit mmio: [0, > fff] > [ 0.827103] pci 0000:02:0f.0: supports D1 > [ 0.827107] pci 0000:02:0f.0: supports D2 > [ 0.827111] pci 0000:02:0f.0: PME# supported from D0 D1 > D2 D3hot D3cold > [ 0.827119] pci 0000:02:0f.0: PME# disabled > [ 0.827153] PCI: 0000:02:0f.1 reg 10 32bit mmio: [0, > fff] > [ 0.827172] pci 0000:02:0f.1: supports D1 > [ 0.827176] pci 0000:02:0f.1: supports D2 > [ 0.827180] pci 0000:02:0f.1: PME# supported from D0 D1 > D2 D3hot D3cold > [ 0.827188] pci 0000:02:0f.1: PME# disabled > [ 0.827222] PCI: 0000:02:0f.2 reg 10 32bit mmio: > [f8ffc800, f8ffcfff] > [ 0.827233] PCI: 0000:02:0f.2 reg 14 32bit mmio: > [f8ff8000, f8ffbfff] > [ 0.827278] pci 0000:02:0f.2: supports D2 > [ 0.827282] pci 0000:02:0f.2: PME# supported from D2 > D3hot > [ 0.827289] pci 0000:02:0f.2: PME# disabled > [ 0.827320] pci 0000:00:1e.0: transparent bridge > [ 0.827327] PCI: bridge 0000:00:1e.0 io port: [e000, > ffff] > [ 0.827334] PCI: bridge 0000:00:1e.0 32bit mmio: > [f4000000, fbffffff] > [ 0.827387] bus 00 -> node 0 > [ 0.827400] ACPI: PCI Interrupt Routing Table > [\_SB_.PCI0._PRT] > [ 0.827538] ACPI: PCI Interrupt Routing Table > [\_SB_.PCI0.AGP_._PRT] > [ 0.827578] ACPI: PCI Interrupt Routing Table > [\_SB_.PCI0.PCIE._PRT] > [ 0.886464] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 > 6 7 9 10 *11 12 14 15) > [ 0.886963] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 *5 > 6 7 9 10 11 12 14 15) > [ 0.887373] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 > 6 7 9 10 11 12 14 15) *0, disabled. > [ 0.887871] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 > 6 7 9 *10 11 12 14 15) > [ 0.888230] ACPI: Power Resource [PADA] (on) > [ 0.888341] Linux Plug and Play Support v0.97 (c) Adam > Belay > [ 0.888427] pnp: PnP ACPI init > [ 0.888446] ACPI: bus type pnp registered > [ 0.936890] pnp 00:02: io resource (0x800-0x805) > overlaps 0000:00:1f.0 BAR 7 (0x800-0x87f), disabling > [ 0.936898] pnp 00:02: io resource (0x808-0x80f) > overlaps 0000:00:1f.0 BAR 7 (0x800-0x87f), disabling > [ 0.937118] pnp 00:03: io resource (0x806-0x807) > overlaps 0000:00:1f.0 BAR 7 (0x800-0x87f), disabling > [ 0.937126] pnp 00:03: io resource (0x810-0x85f) > overlaps 0000:00:1f.0 BAR 7 (0x800-0x87f), disabling > [ 0.937134] pnp 00:03: io resource (0x860-0x87f) > overlaps 0000:00:1f.0 BAR 7 (0x800-0x87f), disabling > [ 0.938472] pnp 00:04: io resource (0xf000-0xf0fe) > overlaps 0000:00:1e.0 BAR 7 (0xe000-0xffff), disabling > [ 0.938480] pnp 00:04: io resource (0xf100-0xf1fe) > overlaps 0000:00:1e.0 BAR 7 (0xe000-0xffff), disabling > [ 0.938488] pnp 00:04: io resource (0xf200-0xf2fe) > overlaps 0000:00:1e.0 BAR 7 (0xe000-0xffff), disabling > [ 0.938495] pnp 00:04: io resource (0xf400-0xf4fe) > overlaps 0000:00:1e.0 BAR 7 (0xe000-0xffff), disabling > [ 0.938503] pnp 00:04: io resource (0xf500-0xf5fe) > overlaps 0000:00:1e.0 BAR 7 (0xe000-0xffff), disabling > [ 0.938511] pnp 00:04: io resource (0xf600-0xf6fe) > overlaps 0000:00:1e.0 BAR 7 (0xe000-0xffff), disabling > [ 0.938518] pnp 00:04: io resource (0xf800-0xf8fe) > overlaps 0000:00:1e.0 BAR 7 (0xe000-0xffff), disabling > [ 0.938526] pnp 00:04: io resource (0xf900-0xf9fe) > overlaps 0000:00:1e.0 BAR 7 (0xe000-0xffff), disabling > [ 0.938533] pnp 00:04: io resource (0xfa00-0xfafe) > overlaps 0000:00:1e.0 BAR 7 (0xe000-0xffff), disabling > [ 0.938541] pnp 00:04: io resource (0xfc00-0xfcfe) > overlaps 0000:00:1e.0 BAR 7 (0xe000-0xffff), disabling > [ 0.938549] pnp 00:04: io resource (0xfd00-0xfdfe) > overlaps 0000:00:1e.0 BAR 7 (0xe000-0xffff), disabling > [ 0.938556] pnp 00:04: io resource (0xfe00-0xfefe) > overlaps 0000:00:1e.0 BAR 7 (0xe000-0xffff), disabling > [ 0.938564] pnp 00:04: mem resource > (0xfa000000-0xfbffffff) overlaps 0000:00:1e.0 BAR 8 > (0xf4000000-0xfbffffff), disabling > [ 1.044983] pnp: PnP ACPI: found 15 devices > [ 1.044989] ACPI: ACPI bus type pnp unregistered > [ 1.044998] PnPBIOS: Disabled by ACPI PNP > [ 1.045871] PCI: Using ACPI for IRQ routing > [ 1.046099] NET: Registered protocol family 8 > [ 1.046099] NET: Registered protocol family 20 > [ 1.046099] NetLabel: Initializing > [ 1.046099] NetLabel: domain hash size = 128 > [ 1.046099] NetLabel: protocols = UNLABELED CIPSOv4 > [ 1.046099] NetLabel: unlabeled traffic allowed by > default > [ 1.046099] tracer: 772 pages allocated for 65536 > entries of 48 bytes > [ 1.046099] actual entries 65620 > [ 1.046099] AppArmor: AppArmor Filesystem Enabled > [ 1.046099] system 00:00: iomem range 0x0-0x9fbff could > not be reserved > [ 1.046099] system 00:00: iomem range 0x9fc00-0x9ffff > could not be reserved > [ 1.046099] system 00:00: iomem range 0xc0000-0xd3fff > could not be reserved > [ 1.046099] system 00:00: iomem range 0xe0000-0xfffff > could not be reserved > [ 1.046099] system 00:00: iomem range 0x100000-0xffeffff > could not be reserved > [ 1.046099] system 00:00: iomem range > 0xfff0000-0xfffffff could not be reserved > [ 1.046099] system 00:00: iomem range > 0xfeea0000-0xfeefffff could not be reserved > [ 1.046099] system 00:00: iomem range > 0xfff80000-0xffffffff could not be reserved > [ 1.046099] system 00:02: ioport range 0x4d0-0x4d1 has > been reserved > [ 1.046099] system 00:03: ioport range 0x880-0x8bf has > been reserved > [ 1.046099] system 00:03: ioport range 0x8c0-0x8ff has > been reserved > [ 1.046099] system 00:03: ioport range 0x600-0x67f has > been reserved > [ 1.046099] system 00:03: ioport range 0x680-0x6ff has > been reserved > [ 1.046099] system 00:09: ioport range 0x900-0x91f has > been reserved > [ 1.046099] system 00:09: ioport range 0x3f0-0x3f1 has > been reserved > [ 1.083531] pci 0000:00:01.0: PCI bridge, secondary bus > 0000:01 > [ 1.083540] pci 0000:00:01.0: IO window: 0xc000-0xcfff > [ 1.083549] pci 0000:00:01.0: MEM window: > 0xfc000000-0xfdffffff > [ 1.083556] pci 0000:00:01.0: PREFETCH window: > 0x000000e0000000-0x000000e7ffffff > [ 1.083581] pci 0000:02:0f.0: CardBus bridge, secondary > bus 0000:03 > [ 1.083587] pci 0000:02:0f.0: IO window: > 0x00e000-0x00e0ff > [ 1.083594] pci 0000:02:0f.0: IO window: > 0x00f000-0x00f0ff > [ 1.083602] pci 0000:02:0f.0: PREFETCH window: > 0x20000000-0x23ffffff > [ 1.083610] pci 0000:02:0f.0: MEM window: > 0xf4000000-0xf7ffffff > [ 1.083618] pci 0000:02:0f.1: CardBus bridge, secondary > bus 0000:07 > [ 1.083623] pci 0000:02:0f.1: IO window: > 0x00f400-0x00f4ff > [ 1.083630] pci 0000:02:0f.1: IO window: > 0x00f800-0x00f8ff > [ 1.083638] pci 0000:02:0f.1: PREFETCH window: > 0x24000000-0x27ffffff > [ 1.083645] pci 0000:02:0f.1: MEM window: > 0x2c000000-0x2fffffff > [ 1.083653] pci 0000:00:1e.0: PCI bridge, secondary bus > 0000:02 > [ 1.083660] pci 0000:00:1e.0: IO window: 0xe000-0xffff > [ 1.083668] pci 0000:00:1e.0: MEM window: > 0xf4000000-0xfbffffff > [ 1.083676] pci 0000:00:1e.0: PREFETCH window: > 0x00000020000000-0x00000029ffffff > [ 1.083706] pci 0000:00:1e.0: setting latency timer to > 64 > [ 1.083720] pci 0000:02:0f.0: enabling device (0000 > -> 0003) > [ 1.084496] ACPI: PCI Interrupt Link [LNKD] enabled at > IRQ 10 > [ 1.084503] PCI: setting IRQ 10 as level-triggered > [ 1.084511] pci 0000:02:0f.0: PCI INT A -> Link[LNKD] > -> GSI 10 (level, low) -> IRQ 10 > [ 1.084528] pci 0000:02:0f.1: enabling device (0000 > -> 0003) > [ 1.084538] pci 0000:02:0f.1: PCI INT A -> Link[LNKD] > -> GSI 10 (level, low) -> IRQ 10 > [ 1.084550] bus: 00 index 0 io port: [0, ffff] > [ 1.084555] bus: 00 index 1 mmio: [0, ffffffff] > [ 1.084560] bus: 01 index 0 io port: [c000, cfff] > [ 1.084564] bus: 01 index 1 mmio: [fc000000, fdffffff] > [ 1.084569] bus: 01 index 2 mmio: [e0000000, e7ffffff] > [ 1.084574] bus: 01 index 3 mmio: [0, 0] > [ 1.084578] bus: 02 index 0 io port: [e000, ffff] > [ 1.084583] bus: 02 index 1 mmio: [f4000000, fbffffff] > [ 1.084588] bus: 02 index 2 mmio: [20000000, 29ffffff] > [ 1.084593] bus: 02 index 3 io port: [0, ffff] > [ 1.084597] bus: 02 index 4 mmio: [0, ffffffff] > [ 1.084602] bus: 03 index 0 io port: [e000, e0ff] > [ 1.084607] bus: 03 index 1 io port: [f000, f0ff] > [ 1.084611] bus: 03 index 2 mmio: [20000000, 23ffffff] > [ 1.084616] bus: 03 index 3 mmio: [f4000000, f7ffffff] > [ 1.084621] bus: 07 index 0 io port: [f400, f4ff] > [ 1.084626] bus: 07 index 1 io port: [f800, f8ff] > [ 1.084630] bus: 07 index 2 mmio: [24000000, 27ffffff] > [ 1.084635] bus: 07 index 3 mmio: [2c000000, 2fffffff] > [ 1.084665] NET: Registered protocol family 2 > [ 1.085013] IP route cache hash table entries: 2048 > (order: 1, 8192 bytes) > [ 1.085582] TCP established hash table entries: 8192 > (order: 4, 65536 bytes) > [ 1.085785] TCP bind hash table entries: 8192 (order: 4, > 65536 bytes) > [ 1.085982] TCP: Hash tables configured (established > 8192 bind 8192) > [ 1.085989] TCP reno registered > [ 1.086187] NET: Registered protocol family 1 > [ 1.086462] checking if image is > initramfs...<7>Switched to high resolution mode on CPU > 0 > [ 1.672174] it is > [ 2.420004] Freeing initrd memory: 7977k freed > [ 2.421714] audit: initializing netlink socket > (disabled) > [ 2.421755] type=2000 audit(1228390435.420:1): > initialized > [ 2.432573] HugeTLB registered 4 MB page size, > pre-allocated 0 pages > [ 2.438791] VFS: Disk quotas dquot_6.5.1 > [ 2.439039] Dquot-cache hash table entries: 1024 (order > 0, 4096 bytes) > [ 2.439320] msgmni has been set to 496 > [ 2.439660] io scheduler noop registered > [ 2.439666] io scheduler anticipatory registered > [ 2.439671] io scheduler deadline registered > [ 2.439708] io scheduler cfq registered (default) > [ 2.439787] pci 0000:01:00.0: Boot video device > [ 2.441130] isapnp: Scanning for PnP cards... > [ 2.793815] isapnp: No Plug & Play device found > [ 2.890263] Serial: 8250/16550 driver4 ports, IRQ > sharing enabled > [ 2.890466] serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is > a 16550A > [ 2.892137] 00:0d: ttyS0 at I/O 0x3f8 (irq = 4) is a > 16550A > [ 2.896545] brd: module loaded > [ 2.896725] input: Macintosh mouse button emulation as > /devices/virtual/input/input0 > [ 2.897045] PNP: PS/2 Controller > [PNP0303:KBC,PNP0f13:PS2M] at 0x60,0x64 irq 1,12 > [ 2.902546] serio: i8042 KBD port at 0x60,0x64 irq 1 > [ 2.902562] serio: i8042 AUX port at 0x60,0x64 irq 12 > [ 2.903456] mice: PS/2 mouse device common for all mice > [ 2.903801] rtc_cmos 00:07: rtc core: registered > rtc_cmos as rtc0 > [ 2.903831] rtc0: alarms up to one day > [ 2.904203] EISA: Probing bus 0 at eisa.0 > [ 2.904241] EISA: Detected 0 cards. > [ 2.904248] cpuidle: using governor ladder > [ 2.904253] cpuidle: using governor menu > [ 2.905576] TCP cubic registered > [ 2.905647] Using IPI No-Shortcut mode > [ 2.906248] registered taskstats version 1 > [ 2.906501] Magic number: 4:531:579 > [ 2.906791] mem kmem: hash matches > [ 2.906808] pci_bus 0000:00: hash matches > [ 2.906865] rtc_cmos 00:07: setting system clock to > 2008-12-04 11:33:56 UTC (1228390436) > [ 2.906873] BIOS EDD facility v0.16 2004-Jun-25, 0 > devices found > [ 2.906878] EDD information not available. > [ 2.907811] Freeing unused kernel memory: 424k freed > [ 2.907926] Write protecting the kernel text: 2576k > [ 2.908000] Write protecting the kernel read-only data: > 936k > [ 2.912271] input: AT Translated Set 2 keyboard as > /devices/platform/i8042/serio0/input/input1 > [ 3.259794] fuse init (API version 7.9) > [ 3.558633] ACPI: CPU0 (power states: C1[C1] C2[C2]) > [ 3.563726] processor ACPI0007:00: registered as > cooling_device0 > [ 3.593164] thermal LNXTHERM:01: registered as > thermal_zone0 > [ 3.612301] ACPI: Thermal Zone [THM] (25 C) > [ 4.870224] ACPI: ACPI Dock Station Driver > [ 5.010128] 3c59x 0000:02:06.0: PCI INT A -> > Link[LNKD] -> GSI 10 (level, low) -> IRQ 10 > [ 5.010149] 3c59x: Donald Becker and others. > [ 5.010161] 0000:02:06.0: 3Com PCI 3c556 Laptop Tornado > at d0826c00. > [ 5.333898] SCSI subsystem initialized > [ 5.334836] ohci1394 0000:02:0f.2: PCI INT A -> > Link[LNKD] -> GSI 10 (level, low) -> IRQ 10 > [ 5.385709] ohci1394: fw-host0: OHCI-1394 1.0 (PCI): > IRQ=[10] MMIO=[f8ffc800-f8ffcfff] Max Packet=[2048] IR/IT > contexts=[4/4] > [ 5.505177] usbcore: registered new interface driver > usbfs > [ 5.505239] usbcore: registered new interface driver hub > [ 5.505361] usbcore: registered new device driver usb > [ 5.518183] USB Universal Host Controller Interface > driver v3.0 > [ 5.518310] uhci_hcd 0000:00:1f.2: PCI INT D -> > Link[LNKD] -> GSI 10 (level, low) -> IRQ 10 > [ 5.518330] uhci_hcd 0000:00:1f.2: setting latency timer > to 64 > [ 5.518338] uhci_hcd 0000:00:1f.2: UHCI Host Controller > [ 5.518450] uhci_hcd 0000:00:1f.2: new USB bus > registered, assigned bus number 1 > [ 5.518489] uhci_hcd 0000:00:1f.2: irq 10, io base > 0x0000dce0 > [ 5.518892] usb usb1: configuration #1 chosen from 1 > choice > [ 5.518956] hub 1-0:1.0: USB hub found > [ 5.518974] hub 1-0:1.0: 2 ports detected > [ 5.520984] libata version 3.00 loaded. > [ 5.620780] pata_acpi 0000:00:1f.1: setting latency > timer to 64 > [ 5.631544] ata_piix 0000:00:1f.1: version 2.12 > [ 5.631638] ata_piix 0000:00:1f.1: setting latency timer > to 64 > [ 5.632367] scsi0 : ata_piix > [ 5.632729] scsi1 : ata_piix > [ 5.633138] ata1: PATA max UDMA/100 cmd 0x1f0 ctl 0x3f6 > bmdma 0xbfa0 irq 14 > [ 5.633145] ata2: PATA max UDMA/100 cmd 0x170 ctl 0x376 > bmdma 0xbfa8 irq 15 > [ 5.804745] ata1.00: ATA-5: IC25N020ATDA04-0, DA3OA70A, > max UDMA/100 > [ 5.804756] ata1.00: 39070080 sectors, multi 8: LBA > [ 5.804788] ata1.01: ATAPI: SAMSUNG CD-ROM SN-124, N001, > max UDMA/33, CDB intr > [ 5.804808] ata1.01: device is on DMA blacklist, > disabling DMA > [ 5.820617] ata1.00: configured for UDMA/100 > [ 5.836375] ata1.01: configured for PIO4 > [ 5.992491] scsi 0:0:0:0: Direct-Access ATA > IC25N020ATDA04-0 DA3O PQ: 0 ANSI: 5 > [ 5.993091] scsi 0:0:1:0: CD-ROM SAMSUNG > CD-ROM SN-124 N001 PQ: 0 ANSI: 5 > [ 6.536740] scsi 0:0:0:0: Attached scsi generic sg0 type > 0 > [ 6.536828] scsi 0:0:1:0: Attached scsi generic sg1 type > 5 > [ 6.595706] Driver 'sd' needs updating - please > use bus_type methods > [ 6.595985] sd 0:0:0:0: [sda] 39070080 512-byte hardware > sectors (20004 MB) > [ 6.596063] sd 0:0:0:0: [sda] Write Protect is off > [ 6.596069] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00 > [ 6.596161] sd 0:0:0:0: [sda] Write cache: enabled, read > cache: enabled, doesn't support DPO or FUA > [ 6.596335] sd 0:0:0:0: [sda] 39070080 512-byte hardware > sectors (20004 MB) > [ 6.596384] sd 0:0:0:0: [sda] Write Protect is off > [ 6.596391] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00 > [ 6.596480] sd 0:0:0:0: [sda] Write cache: enabled, read > cache: enabled, doesn't support DPO or FUA > [ 6.596490] sda:<4>Driver 'sr' needs > updating - please use bus_type methods > [ 6.615227] sda1 sda2 <Marking TSC unstable due to > TSC halts in idle > [ 6.640212] sda5 > > [ 6.640570] sd 0:0:0:0: [sda] Attached SCSI disk > [ 6.657982] sr0: scsi3-mmc drive: 24x/24x cd/rw xa/form2 > cdda tray > [ 6.657995] Uniform CD-ROM driver Revision: 3.20 > [ 6.658228] sr 0:0:1:0: Attached scsi CD-ROM sr0 > [ 6.781763] ieee1394: Host added: ID:BUS[0-00:1023] > GUID[464fc00004d52810] > [ 7.053458] PM: Starting manual resume from disk > [ 7.053467] PM: Resume from partition 8:5 > [ 7.053470] PM: Checking hibernation image. > [ 7.053711] PM: Resume from disk failed. > [ 7.159283] kjournald starting. Commit interval 5 > seconds > [ 7.159320] EXT3-fs: mounted filesystem with ordered > data mode. > [ 17.967006] udevd version 124 started > [ 19.516917] pci_hotplug: PCI Hot Plug PCI Core version: > 0.5 > [ 19.626987] shpchp: Standard Hot Plug PCI Controller > Driver version: 0.4 > [ 19.689428] iTCO_vendor_support: vendor-support=0 > [ 19.754034] iTCO_wdt: Intel TCO WatchDog Timer Driver > v1.03 (30-Apr-2008) > [ 19.754974] iTCO_wdt: Found a ICH2-M TCO device > (Version=1, TCOBASE=0x0860) > [ 19.755274] iTCO_wdt: initialized. heartbeat=30 sec > (nowayout=0) > [ 19.845164] Linux agpgart interface v0.103 > [ 19.935192] agpgart-intel 0000:00:00.0: Intel i815 > Chipset > [ 19.961137] agpgart-intel 0000:00:00.0: AGP aperture is > 64M @ 0xe8000000 > [ 20.027157] intel_rng: FWH not detected > [ 20.243501] input: PC Speaker as > /devices/platform/pcspkr/input/input2 > [ 20.749450] ACPI: AC Adapter [AC] (on-line) > [ 21.266774] ACPI: Battery Slot [BAT0] (battery absent) > [ 22.769885] ACPI: Battery Slot [BAT1] (battery present) > [ 22.770159] input: Lid Switch as > /devices/LNXSYSTM:00/device:00/PNP0C0D:00/input/input3 > [ 22.770886] ACPI: Lid Switch [LID] > [ 22.771097] input: Power Button (CM) as > /devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input4 > [ 22.780137] ACPI: Power Button (CM) [PBTN] > [ 22.780456] input: Sleep Button (CM) as > /devices/LNXSYSTM:00/device:00/PNP0C0E:00/input/input5 > [ 22.796065] ACPI: Sleep Button (CM) [SBTN] > [ 23.579737] parport_pc 00:0e: reported by Plug and Play > ACPI > [ 23.579795] parport0: PC-style at 0x378 (0x778), irq 7, > dma 3 [PCSPP,TRISTATE,COMPAT,ECP,DMA] > [ 24.109334] input: Video Bus as > /devices/LNXSYSTM:00/device:00/PNP0A03:00/device:09/device:0a/input/input6 > [ 24.120102] ACPI: Video Device [VID] (multi-head: yes > rom: no post: no) > [ 24.225898] Yenta: CardBus bridge found at 0000:02:0f.0 > [1028:00e5] > [ 24.225927] Yenta: Using CSCINT to route CSC interrupts > to PCI > [ 24.225932] Yenta: Routing CardBus interrupts to PCI > [ 24.225941] Yenta TI: socket 0000:02:0f.0, mfunc > 0x05033002, devctl 0x64 > [ 24.456910] Yenta: ISA IRQ mask 0x0838, PCI irq 10 > [ 24.456920] Socket status: 30000006 > [ 24.456928] pcmcia: parent PCI bridge I/O window: 0xe000 > - 0xffff > [ 24.456935] cs: IO port probe 0xe000-0xffff: clean. > [ 24.457743] pcmcia: parent PCI bridge Memory window: > 0xf4000000 - 0xfbffffff > [ 24.457749] pcmcia: parent PCI bridge Memory window: > 0x20000000 - 0x29ffffff > [ 24.458573] Yenta: CardBus bridge found at 0000:02:0f.1 > [1028:00e5] > [ 24.458596] Yenta: Using CSCINT to route CSC interrupts > to PCI > [ 24.458601] Yenta: Routing CardBus interrupts to PCI > [ 24.458609] Yenta TI: socket 0000:02:0f.1, mfunc > 0x05033002, devctl 0x64 > [ 24.688698] Yenta: ISA IRQ mask 0x0838, PCI irq 10 > [ 24.688707] Socket status: 30000006 > [ 24.688715] pcmcia: parent PCI bridge I/O window: 0xe000 > - 0xffff > [ 24.688722] cs: IO port probe 0xe000-0xffff: clean. > [ 24.689529] pcmcia: parent PCI bridge Memory window: > 0xf4000000 - 0xfbffffff > [ 24.689536] pcmcia: parent PCI bridge Memory window: > 0x20000000 - 0x29ffffff > [ 24.978970] ACPI: PCI Interrupt Link [LNKB] enabled at > IRQ 5 > [ 24.978981] PCI: setting IRQ 5 as level-triggered > [ 24.978989] Maestro3 0000:02:03.0: PCI INT A -> > Link[LNKB] -> GSI 5 (level, low) -> IRQ 5 > [ 24.979003] firmware: requesting > ess/maestro3_assp_kernel.fw > [ 24.990244] Synaptics Touchpad, model: 1, fw: 5.7, id: > 0x8146b1, caps: 0x804793/0x0 > [ 24.990255] serio: Synaptics pass-through port at > isa0060/serio1/input0 > [ 25.032093] input: SynPS/2 Synaptics TouchPad as > /devices/platform/i8042/serio1/input/input7 > [ 25.555234] dcdbas dcdbas: Dell Systems Management Base > Driver (version 5.6.0-3.2) > [ 29.024237] firmware: requesting > ess/maestro3_assp_minisrc.fw > [ 29.502411] cs: IO port probe 0x100-0x3af: excluding > 0x200-0x207 > [ 29.503371] cs: IO port probe 0x3e0-0x4ff: clean. > [ 29.503809] cs: IO port probe 0x820-0x8ff: clean. > [ 29.503917] cs: IO port probe 0xc00-0xcf7: clean. > [ 29.504603] cs: IO port probe 0xa00-0xaff: clean. > [ 29.556217] cs: IO port probe 0x100-0x3af: excluding > 0x200-0x207 > [ 29.557175] cs: IO port probe 0x3e0-0x4ff: clean. > [ 29.557611] cs: IO port probe 0x820-0x8ff: clean. > [ 29.557718] cs: IO port probe 0xc00-0xcf7: clean. > [ 29.558377] cs: IO port probe 0xa00-0xaff: clean. > [ 30.222349] IBM TrackPoint firmware: 0x0b, buttons: 2/3 > [ 30.512972] input: TPPS/2 IBM TrackPoint as > /devices/platform/i8042/serio1/serio2/input/input8 > [ 31.223184] lp0: using parport0 (interrupt-driven). > [ 31.609335] Adding 746980k swap on /dev/sda5. > Priority:-1 extents:1 across:746980k > [ 32.328408] EXT3 FS on sda1, internal journal > [ 33.917035] type=1505 audit(1228390467.200:2): > operation="profile_load" > name="/usr/share/gdm/guest-session/Xsession" > name2="default" pid=3953 > [ 34.371389] type=1505 audit(1228390467.652:3): > operation="profile_load" > name="/usr/lib/cups/backend/cups-pdf" > name2="default" pid=3958 > [ 34.372316] type=1505 audit(1228390467.656:4): > operation="profile_load" > name="/usr/sbin/cupsd" name2="default" > pid=3958 > [ 34.618250] ip_tables: (C) 2000-2006 Netfilter Core Team > [ 35.925827] ACPI: WMI: Mapper loaded > [ 37.829809] warning: `avahi-daemon' uses 32-bit > capabilities (legacy support in use) > [ 37.969318] apm: BIOS version 1.2 Flags 0x03 (Driver > version 1.16ac) > [ 37.969334] apm: overridden by ACPI. > [ 38.300167] ppdev: user-space parallel port driver > [ 38.970329] ondemand governor failed, too long > transition latency of HW, fallback to performance governor > [ 40.879639] Bluetooth: Core ver 2.13 > [ 40.884479] NET: Registered protocol family 31 > [ 40.884503] Bluetooth: HCI device and connection manager > initialized > [ 40.884511] Bluetooth: HCI socket layer initialized > [ 40.940319] Bluetooth: L2CAP ver 2.11 > [ 40.940339] Bluetooth: L2CAP socket layer initialized > [ 40.991542] Bluetooth: RFCOMM socket layer initialized > [ 41.000531] Bluetooth: RFCOMM TTY layer initialized > [ 41.000558] Bluetooth: RFCOMM ver 1.10 > [ 41.008543] Bluetooth: SCO (Voice Link) ver 0.6 > [ 41.008562] Bluetooth: SCO socket layer initialized > [ 41.045783] Bluetooth: BNEP (Ethernet Emulation) ver 1.3 > [ 41.045799] Bluetooth: BNEP filters: protocol multicast > [ 41.127099] Bridge firewalling registered > [ 41.130058] pan0: Dropping NETIF_F_UFO since no > NETIF_F_HW_CSUM feature. > [ 45.261304] eth0: setting half-duplex. > [ 144.208367] ppdev0: registered pardevice > [ 144.256269] ppdev0: unregistered pardevice > [ 145.940107] type=1503 audit(1228390579.224:5): > operation="inode_permission" > requested_mask="r::" denied_mask="r::" > fsuid=7 name="/proc/5468/net/" pid=5468 > profile="/usr/sbin/cupsd" > [ 146.114677] NET: Registered protocol family 10 > [ 146.118597] lo: Disabled Privacy Extensions > [ 146.121578] ADDRCONF(NETDEV_UP): eth0: link is not ready > [ 146.124577] type=1503 audit(1228390579.408:6): > operation="socket_create" family="ax25" > sock_type="dgram" protocol=0 pid=5468 > profile="/usr/sbin/cupsd" > [ 146.124611] type=1503 audit(1228390579.408:7): > operation="socket_create" > family="netrom" sock_type="seqpacket" > protocol=0 pid=5468 profile="/usr/sbin/cupsd" > [ 146.124627] type=1503 audit(1228390579.408:8): > operation="socket_create" family="rose" > sock_type="dgram" protocol=0 pid=5468 > profile="/usr/sbin/cupsd" > [ 146.124642] type=1503 audit(1228390579.408:9): > operation="socket_create" family="ipx" > sock_type="dgram" protocol=0 pid=5468 > profile="/usr/sbin/cupsd" > [ 146.124657] type=1503 audit(1228390579.408:10): > operation="socket_create" > family="appletalk" sock_type="dgram" > protocol=0 pid=5468 profile="/usr/sbin/cupsd" > [ 146.124673] type=1503 audit(1228390579.408:11): > operation="socket_create" > family="econet" sock_type="dgram" > protocol=0 pid=5468 profile="/usr/sbin/cupsd" > [ 146.124688] type=1503 audit(1228390579.408:12): > operation="socket_create" family="ash" > sock_type="dgram" protocol=0 pid=5468 > profile="/usr/sbin/cupsd" > [ 146.124703] type=1503 audit(1228390579.408:13): > operation="socket_create" family="x25" > sock_type="seqpacket" protocol=0 pid=5468 > profile="/usr/sbin/cupsd" > [ 146.152221] type=1503 audit(1228390579.436:14): > operation="inode_permission" > requested_mask="::r" denied_mask="::r" > fsuid=7 name="/proc/5468/net/dev" pid=5468 > profile="/usr/sbin/cupsd" > [ 146.240186] ppdev0: registered pardevice > [ 146.288060] ppdev0: unregistered pardevice > [ 146.310010] ppdev0: registered pardevice > [ 146.360455] ppdev0: unregistered pardevice > [ 414.784052] usb 1-1: new full speed USB device using > uhci_hcd and address 2 > [ 415.526077] usb 1-1: configuration #1 chosen from 1 > choice > [ 415.767495] usbcore: registered new interface driver > libusual > [ 415.810252] Initializing USB Mass Storage driver... > [ 415.814078] scsi2 : SCSI emulation for USB Mass Storage > devices > [ 415.823953] usbcore: registered new interface driver > usb-storage > [ 415.824631] USB Mass Storage support registered. > [ 415.826973] usb-storage: device found at 2 > [ 415.826984] usb-storage: waiting for device to settle > before scanning > [ 420.826185] usb-storage: device scan complete > [ 420.831138] scsi 2:0:0:0: Direct-Access USB > DISK 2.0 0403 PQ: 0 ANSI: 0 CCS > [ 420.845092] sd 2:0:0:0: [sdb] 7962624 512-byte hardware > sectors (4077 MB) > [ 420.851071] sd 2:0:0:0: [sdb] Write Protect is off > [ 420.851085] sd 2:0:0:0: [sdb] Mode Sense: 43 00 00 00 > [ 420.851091] sd 2:0:0:0: [sdb] Assuming drive cache: > write through > [ 420.870178] sd 2:0:0:0: [sdb] 7962624 512-byte hardware > sectors (4077 MB) > [ 420.895188] sd 2:0:0:0: [sdb] Write Protect is off > [ 420.895209] sd 2:0:0:0: [sdb] Mode Sense: 43 00 00 00 > [ 420.895215] sd 2:0:0:0: [sdb] Assuming drive cache: > write through > [ 420.895232] sdb: sdb1 > [ 420.910651] sd 2:0:0:0: [sdb] Attached SCSI removable > disk > [ 420.910986] sd 2:0:0:0: Attached scsi generic sg2 type 0 > > Module Size Used by > nls_iso8859_1 12032 1 > nls_cp437 13696 1 > vfat 18816 1 > fat 57376 1 vfat > usb_storage 81728 1 > libusual 27156 1 usb_storage > ipv6 263972 8 > binfmt_misc 16904 1 > bridge 56980 0 > stp 10628 1 bridge > bnep 20480 2 > sco 18308 2 > rfcomm 44432 0 > l2cap 30464 6 bnep,rfcomm > bluetooth 61924 6 bnep,sco,rfcomm,l2cap > ppdev 15620 0 > speedstep_smi 12560 0 > speedstep_lib 12676 1 speedstep_smi > cpufreq_powersave 9856 0 > cpufreq_stats 13188 0 > cpufreq_userspace 11396 0 > cpufreq_conservative 14600 0 > cpufreq_ondemand 14988 0 > freq_table 12672 3 > speedstep_smi,cpufreq_stats,cpufreq_ondemand > container 11520 0 > wmi 14504 0 > pci_slot 12552 0 > sbs 19464 0 > sbshc 13440 1 sbs > iptable_filter 10752 0 > ip_tables 19600 1 iptable_filter > x_tables 22916 1 ip_tables > sbp2 29324 0 > lp 17156 0 > joydev 18368 0 > pcmcia 43052 0 > dcdbas 15008 0 > evdev 17696 10 > snd_maestro3 27524 3 > snd_ac97_codec 111652 1 snd_maestro3 > ac97_bus 9856 1 snd_ac97_codec > snd_pcm_oss 46848 0 > snd_mixer_oss 22784 1 snd_pcm_oss > snd_pcm 83204 3 > snd_maestro3,snd_ac97_codec,snd_pcm_oss > snd_page_alloc 16136 1 snd_pcm > psmouse 45200 0 > serio_raw 13444 0 > snd_seq_dummy 10884 0 > yenta_socket 31756 2 > rsrc_nonstatic 19072 1 yenta_socket > pcmcia_core 43412 3 > pcmcia,yenta_socket,rsrc_nonstatic > video 25104 0 > output 11008 1 video > parport_pc 39204 1 > parport 42604 3 ppdev,lp,parport_pc > snd_seq_oss 38528 0 > snd_seq_midi 14336 0 > snd_rawmidi 29824 1 snd_seq_midi > snd_seq_midi_event 15232 2 snd_seq_oss,snd_seq_midi > snd_seq 57776 6 > snd_seq_dummy,snd_seq_oss,snd_seq_midi,snd_seq_midi_event > snd_timer 29960 2 snd_pcm,snd_seq > snd_seq_device 15116 5 > snd_seq_dummy,snd_seq_oss,snd_seq_midi,snd_rawmidi,snd_seq > snd 63268 16 > snd_maestro3,snd_ac97_codec,snd_pcm_oss,snd_mixer_oss,snd_pcm,snd_seq_oss,snd_rawmidi,snd_seq,snd_timer,snd_seq_device > soundcore 15328 1 snd > button 14224 0 > battery 18436 0 > ac 12292 0 > pcspkr 10624 0 > intel_agp 33724 1 > agpgart 42184 1 intel_agp > iTCO_wdt 18596 0 > iTCO_vendor_support 11652 1 iTCO_wdt > shpchp 37908 0 > pci_hotplug 35236 1 shpchp > ext3 133256 1 > jbd 55444 1 ext3 > mbcache 16004 1 ext3 > sr_mod 22212 0 > cdrom 43168 1 sr_mod > sd_mod 42264 5 > crc_t10dif 9984 1 sd_mod > sg 39732 0 > ata_generic 12932 0 > ata_piix 24580 2 > pata_acpi 12160 0 > uhci_hcd 30736 0 > libata 177312 3 > ata_generic,ata_piix,pata_acpi > usbcore 148848 4 > usb_storage,libusual,uhci_hcd > ohci1394 37936 0 > scsi_mod 155212 6 > usb_storage,sbp2,sr_mod,sd_mod,sg,libata > ieee1394 96324 2 sbp2,ohci1394 > 3c59x 48936 0 > mii 13440 1 3c59x > dock 16656 1 libata > thermal 23708 0 > processor 42156 2 thermal > fan 12548 0 > fbcon 47648 0 > tileblit 10880 1 fbcon > font 16512 1 fbcon > bitblit 13824 1 fbcon > softcursor 9984 1 bitblit > fuse 60828 3 > ------------------------------------------------------------------------
