hi
Would like to now how to setup dialup using Fedora 8 in Compaq nx7400.
Have attached the ScanModem outputs
thanks
Best Regards
Binodc
Only plain text email is forwarded by the Discuss@xxxxxxxxxxxxx List Server,
as HTML can contain viruses. Use as the email Subject Line:
YourName, YourCountry kernel 2.6.26.5-28.fc8
With this Subject Line cogent experts will be alerted, and useful case names left in the Archive.
YourCountry will enable Country specific guidance. Linux experts in YourCountry
can be found through: http://www.linux.org/groups/index.html.
They will know your Country's modem code, which may be essential for dialup service.
Responses from Discuss@xxxxxxxxxxxxx are sometimes blocked by an Internet Provider mail filters.
So in a day, also check the Archived responses at http://www.linmodems.org
-------------------------- System information ----------------------------
CPU=i686,
Linux version 2.6.26.5-28.fc8 (mockbuild@xxxxxxxxxxxxxxxxxxxxxxxxxxx) (gcc version 4.1.2 20070925 (Red Hat 4.1.2-33)) #1 SMP Sat Sep 20 09:32:58 EDT 2008
scanModem update of: 2008_11_06
There are no blacklisted modem drivers in /etc/modprobe* files
Attached USB devices are:
ID 1d6b:0002
ID 1d6b:0001
ID 0fce:e030 Sony Ericsson Mobile Communications AB
ID 1d6b:0001
ID 1d6b:0001
ID 1d6b:0001
USB modems not recognized
For candidate card in slot 00:1b.0, firmware information and bootup diagnostics are:
PCI slot PCI ID SubsystemID Name
---------- --------- --------- --------------
00:1b.0 8086:27d8 103c:30a2 Audio device: Intel Corporation 82801G
Modem interrupt assignment and sharing:
16: 322 0 IO-APIC-fasteoi HDA Intel, eth0, i915@pci:0000:00:02.0
--- Bootup diagnostics for card in PCI slot 00:1b.0 ----
ACPI: PCI Interrupt 0000:00:1b.0[A] -> GSI 16 (level, low) -> IRQ 16
PCI: Setting latency timer of device 0000:00:1b.0 to 64
===== Advanced Linux Sound Architecture (ALSA) diagnostics =====
The ALSA packages provide audio support and also drivers for some modems.
ALSA diagnostics are written during bootup to /proc/asound/ folders.
The ALSA verion is 1.0.16
The modem cards detected by "aplay -l" are:
card 0: Intel [HDA Intel], device 6: Si3054 Modem [Si3054 Modem]
The /proc/asound/pcm file reports:
-----------------------
00-06: Si3054 Modem : Si3054 Modem : playback 1 : capture 1
00-00: AD198x Analog : AD198x Analog : playback 1 : capture 1
about /proc/asound/cards:
------------------------
0 [Intel ]: HDA-Intel - HDA Intel
HDA Intel at 0xf4580000 irq 16
PCI slot 00:1b.0 has a High Definition Audio Card
The drivers are in the kernel modules tree at:
/lib/modules/2.6.26.5-28.fc8/kernel/sound/pci/hda/snd-hda-intel.ko
/lib/modules/2.6.23.1-42.fc8/kernel/sound/pci/hda/snd-hda-intel.ko
/lib/modules/2.6.21.7-5.fc8xen/kernel/sound/pci/hda/snd-hda-intel.ko
The modem codec file for the HDA card is: /proc/asound/card0/codec#1
--------------------------------------------------------
Codec: LSI Si3054
Address: 1
Vendor Id: 0x11c13026
Subsystem Id: 0x103c30a2
Revision Id: 0x100700
Modem Function Group: 0x1
The audio card hosts a softmodem chip: 0x11c13026
The softmodem chip 0x11c13026 is in principle supported by the COMM support of slmodemd
and the joint snd-hda-intel audio+modem driver, begun with ALSA version 1.0.13.
For HDA cards with ALC883 chips, an upgrade to ALSA verions 1.0.15 way be necessary. Instructions for Upgrading snd-hda-intel and its dependent driver set are at:
http://linmodems.technion.ac.il/bigarch/archive-eighth/msg00838.html
If not a Conexant modem, the driver snd-hda-intel with its dependent drivers:
snd_hda_intel 331001 4
snd_pcm 61509 2 snd_hda_intel,snd_pcm_oss
snd_page_alloc 11337 2 snd_hda_intel,snd_pcm
snd_hwdep 10309 1 snd_hda_intel
snd 46437 15 snd_hda_intel,snd_seq_oss,snd_seq,snd_seq_device,snd_pcm_oss,snd_mixer_oss,snd_pcm,snd_timer,snd_hwdep
----------
provide audio + modem support with the modem chip residing on the subsystem.
Any particular card can host any one of several soft modem chips.
=== Finished firmware and bootup diagnostics, next deducing cogent software. ===
Predictive diagnostics for card in bus 00:1b.0:
Modem chipset detected on
NAME="Audio device: Intel Corporation 82801G "
CLASS=0403
PCIDEV=8086:27d8
SUBSYS=103c:30a2
IRQ=16
HDA=8086:27d8
SOFT=8086:27d8.HDA
CHIP=0x11c13026
IDENT=11c11040
SLMODEMD_DEVICE=hw:0,6
Driver=agrmodem+agrserial+patched_snd-hda-intel
For candidate modem in: 00:1b.0
0403 Audio device: Intel Corporation 82801G
Primary device ID: 8086:27d8
Subsystem PCI_id 103c:30a2
Softmodem codec or chipset from diagnostics: 0x11c13026
from Archives:
The HDA card softmodem chip is 0x11c13026
Support type needed or chipset: 11c11040
----------------end Softmodem section --------------
Writing DOCs/Intel.txt
Vendor 11c1 is Lucent Technologies with modem technology now under LSI Inc.
Their Linux code developer/maintainer is Soumyendu Sarkar. Support for a chipset and its
continued maintenance is only initiated at the request of a major chipset buyer,
or comparable sponsor. Several different modem chipset types are produced:
with varying support under Linux.
Device ID Support Name Comment
--------- ------------- ----------- -----------------------------
0480 serial_drivers Venus controller chipset 1673JV7
0440-045d martian Mars/Apollo DSP (digital signal processing) chipsets
0462 none 56K.V90/ADSL Wildwire
048d none SV2P soft modem
048(c or f) AGRSM SV2P soft modem
0600 none soft modem, very few in the field.
0620 AGRSM Pinball soft modem, in some HP desktop PCs
011c11040 AGRSM hosted on High Definition Audio cards
062(1-3) none SV92PP,Pinball soft modem, in some HP desktop PCs
martian - At http://linmodems.technion.ac.il/packages/ltmodem/kernel-2.6/martian/
AGRSM - At http://linmodems.technion.ac.il/packages/ltmodem/11c11040/
Compiling resources for a driver module pair: agrmodem.ko + agrserial.ko
Use the agrsm-HDA-20080721-ALSA15.tar.bz2 or agrsm-HDA-20080721.tar.bz2
Read the agrsm_howto.txt. For 11c11040 chips, also the HOWTO-Agere-11c11040-HDA.html
-------------- end Agere Systems section -------------------
Completed candidate modem analyses.
The base of the UDEV device file system is: /dev/.udev
Versions adequately match for the compiler installed: 4.1.2
and the compiler used in kernel assembly: 4.1.2
Minimal compiling resources appear complete:
make utility - /usr/bin/make
Compiler version 4.1
linuc_headers base folder /lib/modules/2.6.26.5-28.fc8/build
However some compilations and executable functions may need additional files,
in the FileNames.h (so called kernel "h"eaders) collection installed in /usr/include/ .
For martian_modem, additional required packages are needed. The also required headers of package libc6 are commonly installed by default.
Compiling hsfmodem drivers does require linux-libc-dev and libc6-dev packages, for kernels 2.6.24 and later versions.
In not included on your install CD, search for them at http://packages.ubuntu.com
or comparable Repository for other Linux distros.
When compiling ALSA drivers, the utility "patch" will also be needed.
If a driver compilation fails, with message including some lack of some FileName.h (stdio.h for example), then
Some additional kernel-header files need installation to /usr/include. The minimal additional packages are libc6-dev
and any of its dependents, under Ubuntu linux-libc-dev
If an alternate ethernet connection is available,
$ apt-get update
$ apt-get -s install linux-kernel-devel
will install needed packages.
For Debian/Ubuntu related distributions, run the following command to display the needed package list:
Otherwise packages have to be found through http://packages.ubuntu.com
Once downloaded and transferred into a Linux partition,
they can be installed alltogether with:
$ sudo dpkg -i *.deb
Checking pppd properties:
-r-xr-xr-x 1 root root 312332 2006-12-01 18:24 /usr/sbin/pppd
In case of an "error 17" "serial loopback" problem, see:
http://linmodems.technion.ac.il/linmodems/archive-sixth/msg02637.html
To enable dialout without Root permission do:
$ su - root (not for Ubuntu)
chmod a+x /usr/sbin/pppd
or under Ubuntu related Linuxes
chmod a+x /usr/sbin/pppd
Checking settings of: /etc/ppp/options
lock
In case of a message like:
Warning: Could not modify /etc/ppp/pap-secrets: Permission denied
see http://linmodems.technion.ac.il/bigarch/archive-sixth/msg04656.html
Read Modem/DOCs/YourSystem.txt concerning other COMM channels: eth0 virbr0
Which can interfere with Browser naviagation.
Don't worry about the following, it is for experts should trouble shooting be necessary.
==========================================================
Checking for modem support lines:
--------------------------------------
/device/modem symbolic link:
slmodemd created symbolic link /dev/ttySL0:
Within /etc/udev/ files:
/etc/udev/rules.d/50-udev-default.rules:KERNEL=="mwave", NAME="modems/mwave", GROUP="uucp"
Within /etc/modprobe.conf files:
Within any ancient /etc/devfs files:
Within ancient kernel 2.4.n /etc/module.conf files:
--------- end modem support lines --------
