Hello,
I am using Ubuntu Hardy, am trying to use eFax-Gtk and receive the
message "No Response from Modem".
I downloaded
http://linmodems.technion.ac.il/pctel-linux/pctel-0.9.7-9-rht-9.tar.gz ,
Extract Here and tried Run, Display in Terminal but my fax still doesn't
work.
Have really done tons of stuff over the last few months and not sure
what to do now.
Below is the printout from ModemData prior to "installing"
pctel-0.9.7-9-rht-9.tar.gz (if that actually happened by clicking on "Run).
Any help you can give would be appreciated. Thank you.
Sharon
-------------------------- System information ----------------------------
CPU=i686,
Linux version 2.6.24-21-generic (buildd@palmer) (gcc version 4.2.3 (Ubuntu 4.2.3-2ubuntu7)) #1 SMP Tue Oct 21 23:43:45 UTC 2008
scanModem update of: 2008_11_06
The modem symbolic link is /dev/modem -> ttySL0
There are no blacklisted modem drivers in /etc/modprobe* files
Attached USB devices are:
ID 1668:6010 Actiontec Electronics, Inc. [hex]
ID 04b8:0820 Seiko Epson Corp.
ID 04b4:6560 Cypress Semiconductor Corp. CY7C65640 USB-2.0 "TetraHub"
ID 0451:2046 Texas Instruments, Inc. TUSB2046 Hub
USB modems not recognized
For candidate card in slot 01:0a.0, firmware information and bootup diagnostics are:
PCI slot PCI ID SubsystemID Name
---------- --------- --------- --------------
01:0a.0 134d:7897 134d:0001 Modem: PCTel Inc HSP MicroModem 56
Modem interrupt assignment and sharing:
11: 302206 XT-PIC-XT uhci_hcd:usb1
--- Bootup diagnostics for card in PCI slot 01:0a.0 ----
[ 24.966284] PCI: Enabling device 0000:01:0a.0 (0000 -> 0001)
[ 24.966913] ACPI: PCI Interrupt 0000:01:0a.0[A] -> Link [LNKC] -> GSI 11 (level, low) -> IRQ 11
=== Finished firmware and bootup diagnostics, next deducing cogent software. ===
Predictive diagnostics for card in bus 01:0a.0:
Modem chipset detected on
NAME="Modem: PCTel Inc HSP MicroModem 56 "
CLASS=0703
PCIDEV=134d:7897
SUBSYS=134d:0001
IRQ=11
IDENT=PCTEL
For candidate modem in: 01:0a.0
0703 Modem: PCTel Inc HSP MicroModem 56
Primary device ID: 134d:7897
Support type needed or chipset: PCTEL
----------------end Softmodem section --------------
At http://linmodems.technion.ac.il/pctel-linux
Get the pctel-0.9.7-9-rht-9.tar.gz
Unpack under Linux with:
tar zxf pctel*.tar.gz
and read instuctions therein.
Read DOCs/Pctel.txt and Modem/DOCs/YourSystem.txt for follow through guidance.
Writing DOCs/Pctel.txt
Completed candidate modem analyses.
The base of the UDEV device file system is: /dev/.udev
Versions adequately match for the compiler installed: 4.2.3
and the compiler used in kernel assembly: 4.2.4
Minimal compiling resources appear complete:
make utility - /usr/bin/make
Compiler version 4.2
linuc_headers base folder /lib/modules/2.6.24-21-generic/build
However some compilations and executable functions may need additional files,
in the FileNames.h (so called kernel "h"eaders) collection installed in /usr/include/ .
For martian_modem, additional required packages are needed. The also required headers of package libc6 are commonly installed by default.
Compiling hsfmodem drivers does require linux-libc-dev and libc6-dev packages, for kernels 2.6.24 and later versions.
In not included on your install CD, search for them at http://packages.ubuntu.com
or comparable Repository for other Linux distros.
When compiling ALSA drivers, the utility "patch" will also be needed.
Compressed files at: /usr/src/sl-modem.tar.bz2
If a driver compilation fails, with message including some lack of some FileName.h (stdio.h for example), then
Some additional kernel-header files need installation to /usr/include. The minimal additional packages are libc6-dev
and any of its dependents, under Ubuntu linux-libc-dev
If an alternate ethernet connection is available,
$ apt-get update
$ apt-get -s install linux-kernel-devel
will install needed packages.
For Debian/Ubuntu related distributions, run the following command to display the needed package list:
Otherwise packages have to be found through http://packages.ubuntu.com
Once downloaded and transferred into a Linux partition,
they can be installed alltogether with:
$ sudo dpkg -i *.deb
Checking pppd properties:
-rwsr-xr-- 1 root dip 269256 2007-10-04 12:57 /usr/sbin/pppd
In case of an "error 17" "serial loopback" problem, see:
http://linmodems.technion.ac.il/linmodems/archive-sixth/msg02637.html
To enable dialout without Root permission do:
$ su - root (not for Ubuntu)
sudo chmod a+x /usr/sbin/pppd
or under Ubuntu related Linuxes
sudo chmod a+x /usr/sbin/pppd
Checking settings of: /etc/ppp/options
asyncmap 0
noauth
crtscts
lock
hide-password
modem
proxyarp
lcp-echo-interval 30
lcp-echo-failure 4
noipx
In case of a message like:
Warning: Could not modify /etc/ppp/pap-secrets: Permission denied
see http://linmodems.technion.ac.il/bigarch/archive-sixth/msg04656.html
Read Modem/DOCs/YourSystem.txt concerning other COMM channels: eth0
Which can interfere with Browser naviagation.
Don't worry about the following, it is for experts should trouble shooting be necessary.
==========================================================
# start/stop the daemon when the USB modem is connected
KERNEL=="slusb[0-9]*", GROUP="dialout", RUN+="/etc/init.d/sl-modem-daemon"
Checking for modem support lines:
--------------------------------------
/device/modem symbolic link: lrwxrwxrwx 1 root root 6 2008-11-25 10:00 /dev/modem -> ttySL0
slmodemd created symbolic link /dev/ttySL0:
Within /etc/udev/ files:
/etc/udev/rules.d/030_sl-modem-daemon.rules:# start/stop the daemon when the USB modem is connected
/etc/udev/rules.d/030_sl-modem-daemon.rules:KERNEL=="slusb[0-9]*", GROUP="dialout", RUN+="/etc/init.d/sl-modem-daemon"
/etc/udev/sl-modem-daemon.rules:# start/stop the daemon when the USB modem is connected
/etc/udev/sl-modem-daemon.rules:KERNEL=="slusb[0-9]*", GROUP="dialout", RUN+="/etc/init.d/sl-modem-daemon"
Within /etc/modprobe.conf files:
/etc/modprobe.d/alsa-base:options snd-atiixp-modem index=-2
/etc/modprobe.d/alsa-base:options snd-via82xx-modem index=-2
/etc/modprobe.d/blacklist-modem:# Uncomment these entries in order to blacklist unwanted modem drivers
/etc/modprobe.d/blacklist-modem:# blacklist snd-atiixp-modem
/etc/modprobe.d/blacklist-modem:# blacklist snd-via82xx-modem
/etc/modprobe.d/sl-modem-daemon.modutils:install slamr modprobe --ignore-install ungrab-winmodem ; modprobe --ignore-install slamr; test -e /dev/slamr0 || (/bin/mknod -m 660 /dev/slamr0 c 242 0 2>/dev/null && chgrp dialout /dev/slamr0)
Within any ancient /etc/devfs files:
Within ancient kernel 2.4.n /etc/module.conf files:
--------- end modem support lines --------
