Antonio, I've maked that changes to wvdial.conf but the result is the same: No Carrier! [Dialer Defaults] Init1 = ATX3 Init2 = ATQ0 V1 E1 S0=0 X3 &C1 &D2 +FCLASS=0 +MS=34 Init3 = ATX3 Stupid Mode = yes Modem Type = Analog Modem ISDN = 0 New PPPD = on Phone = 7020187187 Modem = /dev/ttySL0 Username = **** Password = **** Baud = 115200 Carrier Check = no This is my wvdial.out: ----------------------------------------------------------- --> WvDial: Internet dialer version 1.60 --> Cannot get information for serial port. --> Initializing modem. --> Sending: ATX3 ATX3 OK --> Sending: ATQ0 V1 E1 S0=0 &C1 &D2 +FCLASS=0 +MS=34 ATQ0 V1 E1 S0=0 &C1 &D2 +FCLASS=0 +MS=34 OK --> Sending: ATX3 ATX3 OK --> Modem initialized. --> Sending: ATDT7020187187 --> Waiting for carrier. ATDT7020187187 NO CARRIER --> No Carrier! Trying again. --> Sending: ATDT7020187187 --> Waiting for carrier. ATDT7020187187 NO CARRIER --> No Carrier! Trying again. --> Sending: ATDT7020187187 --> Waiting for carrier. ATDT7020187187 NO CARRIER --> No Carrier! Trying again. --> Sending: ATDT7020187187 --> Waiting for carrier. ATDT7020187187 ----------------------------------------------------------- And this is the output of "tail -f /var/log/messages": ----------------------------------------------------------- root@****:/home/****# tail -f /var/log/messages Nov 26 12:34:23 **** kernel: [ 32.163896] This symbol will go away in the future. Nov 26 12:34:23 **** kernel: [ 32.163899] Please evalute if this is the right api to use and if it really is, submit a report the linux kernel mailinglist together with submitting your code for inclusion. Nov 26 12:34:23 **** kernel: [ 32.234866] iwlagn: Radio disabled by HW RF Kill switch Nov 26 12:34:23 **** kernel: [ 32.238109] ADDRCONF(NETDEV_UP): wlan0: link is not ready Nov 26 12:34:23 **** kernel: [ 32.343629] bridge-eth0: already up Nov 26 12:34:23 **** kernel: [ 32.381948] NET: Registered protocol family 17 Nov 26 12:34:59 **** pulseaudio[6203]: ltdl-bind-now.c: Failed to find original dlopen loader. Nov 26 12:34:59 **** pulseaudio[6205]: main.c: setrlimit(RLIMIT_NICE, (31, 31)) failed: Funzione non permessa Nov 26 12:34:59 **** pulseaudio[6205]: main.c: setrlimit(RLIMIT_RTPRIO, (9, 9)) failed: Funzione non permessa Nov 26 12:36:49 **** kernel: [ 177.852034] hda-intel: IRQ timing workaround is activated for card #0. Suggest a bigger bdl_pos_adj. ----------------------------------------------------------- Thanks, Simone > Date: Tue, 25 Nov 2008 19:29:52 -0600 > From: olivares14031@xxxxxxxxx > To: jonlord84@xxxxxxxxxxx > Subject: Re: Motorola Si3054 - No Carrier Error > CC: discuss@xxxxxxxxxxxxx > > Simeone, > > Could you modify the wvdial.conf file > from > > [Dialer Defaults] > Init1 = ATX3 > Init2 = ATQ0 V1 E1 S0=0 &C1 &D2 +FCLASS=0 +MS=90 > Stupid Mode = on > Modem Type = Analog Modem > ISDN = 0 > New PPPD = on > Phone = 7020187187 > Modem = /dev/ttySL0 > Username = telecom > Password = telecom > Baud = 460800 > Carrier Check = off > > To > > [Dialer Defaults] > Init1 = ATX3 > Init2 = ATQ0 V1 E1 S0=0 X3 &C1 &D2 +FCLASS=0 +MS=34 > Init3 = ATX3 <=== add this to check if it works > Stupid Mode = yes <=== change on to yes > Modem Type = Analog Modem > ISDN = 0 > New PPPD = on > Phone = 7020187187 > Modem = /dev/ttySL0 > Username = telecom > Password = telecom > Baud = 115200 <=== change this from 460800 > Carrier Check = no > > Also take a look here, if you have not done so: > > http://linmodems.technion.ac.il/bigarch/archive-seventh/msg03119.html > > If all else fails, please try to do the following, with the exception > that you put *** in place of password and/or username to prevent > abuse. Also please make a log file and attach it to next mail in case > of failure > > ## To make a logfile wvdial.out > > # wvdial 2>&1 | tee wvdial.out > or > $ sudo wvdial 2>&1 | tee wvdial.out > > Attach it along with output of > $ sudo tail -f /var/log/messages > > HTH, > > Antonio > > > On Tue, Nov 25, 2008 at 7:00 PM, Simone Veronese wrote: >> >> I've tried but it's the same... :( >> >> Simone >> >>> Date: Tue, 25 Nov 2008 16:57:40 -0600 >>> From: olivares14031@xxxxxxxxx >>> To: jonlord84@xxxxxxxxxxx >>> Subject: Re: Motorola Si3054 - No Carrier Error >>> CC: discuss@xxxxxxxxxxxxx >>> >>> Simone, >>> >>> Try Carrier Check = no >>> >>> Carrier Check = no >>> >>> From http://linmodems.technion.ac.il/wvdial.html >>> and >>> http://linmodems.technion.ac.il/post-install.html >>> >>> HTH, >>> >>> Antonio >>> >>> On Tue, Nov 25, 2008 at 2:03 PM, Simone Veronese wrote: >>>> >>>> Hello everybody, >>>> I'm trying to use my Motorola Si3054 modem on my laptop (HP Pavillion dv6599el) with Ubuntu 8.10 >>>> (kernel version 2.6.27-8-generic). >>>> I suppose I have installed and configured correctly the sl-modem-daemon and sure enough >>>> wvdialconfig find the modem and create a symbolic link between /dev/pts/0 (or '1' or '2') and >>>> /dev/ttySL0 (I also manually create another simbolic link between /dev/ttySL0 and /dev/modem). >>>> The problem is that when I try to run wvdial the modem doesn't work, I always get this message: >>>> NO CARRIER >>>> No Carrier! Try Again >>>> The modem loops endlessly: it tries to dial the number of the provider but nothing happens! >>>> I've tried a lot of init string but nothing seems to change. >>>> The (not so) funny thing is that a few days ago the modem worked for one hour and then suddenly >>>> stopped (I'm sure I haven't changed a setting) and it also worked just 10 minutes ago and >>>> then stopped again. >>>> I have another problem: neither kppp nor gnome-ppp can find the modem on /dev/ttySL0 (or >>>> /dev/modem). >>>> It very seems to work randomly... What should I do? >>>> Thanks, >>>> Simone. >>>> >>>> The following are my wvdial.conf and modemData.txt: >>>> >>>> >>>> ----------- wvdial.conf ----------------- >>>> >>>> [Dialer Defaults] >>>> Init1 = ATX3 >>>> Init2 = ATQ0 V1 E1 S0=0 &C1 &D2 +FCLASS=0 +MS=90 >>>> Stupid Mode = on >>>> Modem Type = Analog Modem >>>> ISDN = 0 >>>> New PPPD = on >>>> Phone = 7020187187 >>>> Modem = /dev/ttySL0 >>>> Username = telecom >>>> Password = telecom >>>> Baud = 460800 >>>> Carrier Check = off >>>> >>>> ------------------------------------------ >>>> >>>> >>>> >>>> ----------- modemData.txt ---------------- >>>> >>>> Only plain text email is forwarded by the Discuss@xxxxxxxxxxxxx List Server, >>>> as HTML can contain viruses. Use as the email Subject Line: >>>> YourName, YourCountry kernel 2.6.27-8-generic >>>> With this Subject Line cogent experts will be alerted, and useful case names left in the Archive. >>>> YourCountry will enable Country specific guidance. Linux experts in YourCountry >>>> can be found through: http://www.linux.org/groups/index.html. >>>> They will know your Country's modem code, which may be essential for dialup service. >>>> Responses from Discuss@xxxxxxxxxxxxx are sometimes blocked by an Internet Provider mail filters. >>>> So in a day, also check the Archived responses at http://www.linmodems.org >>>> -------------------------- System information ---------------------------- >>>> CPU=i686, >>>> Linux version 2.6.27-8-generic (buildd@rothera) (gcc version 4.3.2 (Ubuntu 4.3.2-1ubuntu11) ) #1 SMP Thu Nov 6 17:33:54 UTC 2008 >>>> scanModem update of: 2008_11_06 >>>> The modem symbolic link is /dev/modem -> ttySL0 >>>> There are no blacklisted modem drivers in /etc/modprobe* files >>>> Attached USB devices are: >>>> ID 04f2:b015 Chicony Electronics Co., Ltd >>>> ID 1d6b:0002 Linux Foundation 2.0 root hub >>>> ID 03f0:171d Hewlett-Packard Wireless (Bluetooth + WLAN) Interface [Integrated Module] >>>> ID 1d6b:0001 Linux Foundation 1.1 root hub >>>> ID 1d6b:0001 Linux Foundation 1.1 root hub >>>> ID 1d6b:0002 Linux Foundation 2.0 root hub >>>> ID 08ff:2580 AuthenTec, Inc. AES2501 Fingerprint Sensor >>>> ID 1d6b:0001 Linux Foundation 1.1 root hub >>>> ID 045e:0084 Microsoft Corp. Basic Optical Mouse >>>> ID 1d6b:0001 Linux Foundation 1.1 root hub >>>> ID 1d6b:0001 Linux Foundation 1.1 root hub >>>> USB modems not recognized >>>> For candidate card in slot 00:1b.0, firmware information and bootup diagnostics are: >>>> PCI slot PCI ID SubsystemID Name >>>> ---------- --------- --------- -------------- >>>> 00:1b.0 8086:284b 103c:30cc Audio device: Intel Corporation 82801H >>>> Modem interrupt assignment and sharing: >>>> 22: 383 373 IO-APIC-fasteoi HDA Intel >>>> --- Bootup diagnostics for card in PCI slot 00:1b.0 ---- >>>> [ 0.516465] PCI: 0000:00:1b.0 reg 10 64bit mmio: [f8400000, f8403fff] >>>> [ 0.516523] pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold >>>> [ 0.516528] pci 0000:00:1b.0: PME# disabled >>>> [ 17.072230] HDA Intel 0000:00:1b.0: PCI INT A -> GSI 22 (level, low) -> IRQ 22 >>>> [ 17.072259] HDA Intel 0000:00:1b.0: setting latency timer to 64 >>>> The PCI slot 00:1b.0 of the modem card may be disabled early in >>>> a bootup process, but then enabled later. If modem drivers load >>>> but the modem is not responsive, read DOCs/Bootup.txt about possible fixes. >>>> Send dmesg.txt along with ModemData.txt to discuss@xxxxxxxxxxxxx >>>> if help is needed. >>>> >>>> >>>> ===== Advanced Linux Sound Architecture (ALSA) diagnostics ===== >>>> The ALSA packages provide audio support and also drivers for some modems. >>>> ALSA diagnostics are written during bootup to /proc/asound/ folders. >>>> The ALSA verion is 1.0.17 >>>> The modem cards detected by "aplay -l" are: >>>> scheda 0: Intel [HDA Intel], dispositivo 6: Si3054 Modem [Si3054 Modem] >>>> The /proc/asound/pcm file reports: >>>> ----------------------- >>>> 00-06: Si3054 Modem : Si3054 Modem : playback 1 : capture 1 >>>> 00-00: ALC268 Analog : ALC268 Analog : playback 1 : capture 1 >>>> about /proc/asound/cards: >>>> ------------------------ >>>> 0 [Intel ]: HDA-Intel - HDA Intel >>>> HDA Intel at 0xf8400000 irq 22 >>>> PCI slot 00:1b.0 has a High Definition Audio Card >>>> The drivers are in the kernel modules tree at: >>>> /lib/modules/2.6.24-21-generic/kernel/sound/pci/hda/snd-hda-intel.ko >>>> /lib/modules/2.6.24-21-generic/ubuntu/sound/alsa-driver/pci/hda/snd-hda-intel.ko >>>> /lib/modules/2.6.27-8-generic/kernel/sound/pci/hda/snd-hda-intel.ko >>>> /lib/modules/2.6.27-7-generic/kernel/sound/pci/hda/snd-hda-intel.ko >>>> The modem codec file for the HDA card is: /proc/asound/card0/codec#1 >>>> -------------------------------------------------------- >>>> Codec: Motorola Si3054 >>>> Address: 1 >>>> Vendor Id: 0x10573055 >>>> Subsystem Id: 0x10573055 >>>> Revision Id: 0x100700 >>>> Modem Function Group: 0x1 >>>> The audio card hosts a softmodem chip: 0x10573055 >>>> The softmodem chip 0x10573055 is in principle supported by the COMM support of slmodemd >>>> and the joint snd-hda-intel audio+modem driver, begun with ALSA version 1.0.13. >>>> For HDA cards with ALC883 chips, an upgrade to ALSA verions 1.0.15 way be necessary. Instructions for Upgrading snd-hda-intel and its dependent driver set are at: >>>> http://linmodems.technion.ac.il/bigarch/archive-eighth/msg00838.html >>>> If not a Conexant modem, the driver snd-hda-intel with its dependent drivers: >>>> snd_hda_intel 381616 3 >>>> snd_pcm 83204 6 snd_atiixp_modem,snd_via82xx_modem,snd_intel8x0m,snd_ac97_codec,snd_hda_intel,snd_pcm_oss >>>> snd 63268 19 snd_atiixp_modem,snd_via82xx_modem,snd_intel8x0m,snd_ac97_codec,snd_hda_intel,snd_pcm_oss,snd_mixer_oss,snd_pcm,snd_seq_oss,snd_rawmidi,snd_seq,snd_timer,snd_seq_device >>>> snd_page_alloc 16136 5 snd_atiixp_modem,snd_via82xx_modem,snd_intel8x0m,snd_hda_intel,snd_pcm >>>> ---------- >>>> provide audio + modem support with the modem chip residing on the subsystem. >>>> Any particular card can host any one of several soft modem chips. >>>> === Finished firmware and bootup diagnostics, next deducing cogent software. === >>>> Predictive diagnostics for card in bus 00:1b.0: >>>> Modem chipset detected on >>>> NAME="Audio device: Intel Corporation 82801H " >>>> CLASS=0403 >>>> PCIDEV=8086:284b >>>> SUBSYS=103c:30cc >>>> IRQ=22 >>>> HDA=8086:284b >>>> SOFT=8086:284b.HDA >>>> CHIP=0x10573055 >>>> IDENT=slmodemd >>>> SLMODEMD_DEVICE=hw:0,6 >>>> Driver=snd-hda-intel >>>> For candidate modem in: 00:1b.0 >>>> 0403 Audio device: Intel Corporation 82801H >>>> Primary device ID: 8086:284b >>>> Subsystem PCI_id 103c:30cc >>>> Softmodem codec or chipset from diagnostics: 0x10573055 >>>> from Archives: >>>> The HDA card softmodem chip is 0x10573055 >>>> >>>> Support type needed or chipset: slmodemd supporting the snd-hda-intel audio+modem driver >>>> An ALSA (Advanced Linux Sound Architecture) modem driver: snd-hda-intel >>>> provides Low Level support enabling contact with the modem hardware. >>>> For all BUT Conexant chip soft modems (using hsfmodem software) >>>> complementary High Level support is through a Smartlink utility: slmodemd >>>> Download from http://linmodems.technion.ac.il/packages/smartlink/ >>>> the package SLMODEMD.gcc4.3.tar.gz having a compiled slmodemd. Unpack under Linux with: >>>> $ tar zxf SLMODEMD.gcc4.3.tar.gz >>>> and read instructions therein. But briefly, the modem is setup with command: >>>> sudo slmodemd -c YOUR_COUNTRY --alsa hw:0,6 >>>> reporting dynamic creation of ports: >>>> /dev/ttySL0 --> /dev/pts/N , with N some number >>>> Read DOCs/Smartlink.txt and Modem/DOCs/YourSystem.txt for follow through guidance. >>>> ----------------end Softmodem section -------------- >>>> Writing DOCs/Intel.txt >>>> Writing DOCs/Smartlink.txt >>>> ============ end Smartlink section ===================== >>>> Completed candidate modem analyses. >>>> The base of the UDEV device file system is: /dev/.udev >>>> Versions adequately match for the compiler installed: 4.3.2 >>>> and the compiler used in kernel assembly: 4.3.2 >>>> >>>> >>>> Minimal compiling resources appear complete: >>>> make utility - /usr/bin/make >>>> Compiler version 4.3 >>>> linuc_headers base folder /lib/modules/2.6.27-8-generic/build >>>> However some compilations and executable functions may need additional files, >>>> in the FileNames.h (so called kernel "h"eaders) collection installed in /usr/include/ . >>>> For martian_modem, additional required packages are needed. The also required headers of package libc6 are commonly installed by default. >>>> Compiling hsfmodem drivers does require linux-libc-dev and libc6-dev packages, for kernels 2.6.24 and later versions. >>>> In not included on your install CD, search for them at http://packages.ubuntu.com >>>> or comparable Repository for other Linux distros. >>>> When compiling ALSA drivers, the utility "patch" will also be needed. >>>> >>>> Compressed files at: /usr/src/open-vm.tar.bz2 /usr/src/sl-modem.tar.bz2 >>>> >>>> If a driver compilation fails, with message including some lack of some FileName.h (stdio.h for example), then >>>> Some additional kernel-header files need installation to /usr/include. The minimal additional packages are libc6-dev >>>> and any of its dependents, under Ubuntu linux-libc-dev >>>> If an alternate ethernet connection is available, >>>> $ apt-get update >>>> $ apt-get -s install linux-kernel-devel >>>> will install needed packages. >>>> For Debian/Ubuntu related distributions, run the following command to display the needed package list: >>>> Otherwise packages have to be found through http://packages.ubuntu.com >>>> Once downloaded and transferred into a Linux partition, >>>> they can be installed alltogether with: >>>> $ sudo dpkg -i *.deb >>>> >>>> Checking pppd properties: >>>> -rwsr-xr-- 1 root dip 273064 2008-10-16 03:51 /usr/sbin/pppd >>>> In case of an "error 17" "serial loopback" problem, see: >>>> http://linmodems.technion.ac.il/linmodems/archive-sixth/msg02637.html >>>> To enable dialout without Root permission do: >>>> $ su - root (not for Ubuntu) >>>> sudo chmod a+x /usr/sbin/pppd >>>> or under Ubuntu related Linuxes >>>> sudo chmod a+x /usr/sbin/pppd >>>> Checking settings of: /etc/ppp/options >>>> asyncmap 0 >>>> noauth >>>> crtscts >>>> lock >>>> hide-password >>>> modem >>>> proxyarp >>>> lcp-echo-interval 30 >>>> lcp-echo-failure 4 >>>> noipx >>>> In case of a message like: >>>> Warning: Could not modify /etc/ppp/pap-secrets: Permission denied >>>> see http://linmodems.technion.ac.il/bigarch/archive-sixth/msg04656.html >>>> Read Modem/DOCs/YourSystem.txt concerning other COMM channels: eth0 vmnet1 vmnet8 vnet0 wlan0 wmaster0 >>>> Which can interfere with Browser naviagation. >>>> Don't worry about the following, it is for experts should trouble shooting be necessary. >>>> ========================================================== >>>> # start/stop the daemon when the USB modem is connected >>>> KERNEL=="slusb[0-9]*", GROUP="dialout", RUN+="/etc/init.d/sl-modem-daemon" >>>> Checking for modem support lines: >>>> -------------------------------------- >>>> /device/modem symbolic link: lrwxrwxrwx 1 root root 6 2008-11-22 23:43 /dev/modem -> ttySL0 >>>> slmodemd created symbolic link /dev/ttySL0: >>>> Within /etc/udev/ files: >>>> /etc/udev/rules.d/030_sl-modem-daemon.rules:# start/stop the daemon when the USB modem is connected >>>> /etc/udev/rules.d/030_sl-modem-daemon.rules:KERNEL=="slusb[0-9]*", GROUP="dialout", RUN+="/etc/init.d/sl-modem-daemon" >>>> /etc/udev/sl-modem-daemon.rules:# start/stop the daemon when the USB modem is connected >>>> /etc/udev/sl-modem-daemon.rules:KERNEL=="slusb[0-9]*", GROUP="dialout", RUN+="/etc/init.d/sl-modem-daemon" >>>> Within /etc/modprobe.conf files: >>>> /etc/modprobe.d/sl-modem-daemon.modutils:install slamr modprobe --ignore-install ungrab-winmodem ; modprobe --ignore-install slamr; test -e /dev/slamr0 || (/bin/mknod -m 660 /dev/slamr0 c 242 0 2>/dev/null && chgrp dialout /dev/slamr0) >>>> /etc/modprobe.d/alsa-base:options snd-atiixp-modem index=-2 >>>> /etc/modprobe.d/alsa-base:options snd-via82xx-modem index=-2 >>>> /etc/modprobe.d/blacklist-modem:# Uncomment these entries in order to blacklist unwanted modem drivers >>>> /etc/modprobe.d/blacklist-modem:# blacklist snd-atiixp-modem >>>> /etc/modprobe.d/blacklist-modem:# blacklist snd-via82xx-modem >>>> Within any ancient /etc/devfs files: >>>> Within ancient kernel 2.4.n /etc/module.conf files: >>>> /etc/modules:ungrab_winmodem >>>> /etc/modules~:ungrab_winmodem >>>> --------- end modem support lines -------- >>>> >>>> ------------------------------------------ >>>> _________________________________________________________________ >>>> Fanne di tutti i colori, personalizza la tua Hotmail! >>>> http://imagine-windowslive.com/Hotmail/#0 >> >> _________________________________________________________________ >> Sei pronto per la sfida? 50 nuovi schemi per giocare su CrossWire! >> http://livesearch.games.msn.com/crosswire/play_it/ _________________________________________________________________ Messenger: non solo parole. Scaricalo gratis! http://www.messenger.it
