MarvS, I am afraid this is getting beyond me. I am not trying to go beyond 8.04 (Hardy?). Can you help me reset and avoid further complications, since my knowledge of the linux system is too limited to do anything complicated. If it will help I can reinstall 8.04 in order to have a clean system; I have not added much to the install so far. Thanks, Brian -----Original Message----- From: Marvin Stodolsky [mailto:marvin.stodolsky@xxxxxxxxx] Sent: November 16, 2008 6:58 PM To: Brian Voss Cc: discuss@xxxxxxxxxxxxx Subject: Re: BrianVoss, Canada kernel 2.6.24-19-generic Brian 0) unless you have done a full Ubuntu Intrepid installation, you should first work under a kernel like 2.6.24-21-generic, to get the modem working. The 2.7.27 kernels were compiled with a gcc-4.3 compiler, so you would have to install gcc-4.3 and all its depedent packages too. I am working under a mixed Hardy/Intrepid installation but it is NONE trivial keeping track of their separate requirements. Not for the novice 1) you don't need the build-essential. 2) martian-20080617.tar.bz2 is not needed since you also downloaded the martian-full-20080625.tar.gz which includes the ltmdmobj.o Just work in the folder unpacked from martian-full-20080625.tar.gz 3) to clean up the libc6-dev situation, you probably have to download from http://packages.ubuntu.com/intrepid/libc6 the libc6 package. Then again $ sudo dpkg -i libc6 libc6-dev But you should really be working under Hardy, not the 2.7.27 Intepid kernel. MarvS On Sun, Nov 16, 2008 at 12:58 PM, Brian Voss <bevoss@xxxxxxxx> wrote: > Antonio, > > Thank you. I downloaded just the two packages you suggested, put them in my > home directory, then issued the dpkg -i *.deb command, resulting in the > following response: > > Selecting previously deselected package libc6-dev. > (Reading database ... 95844 files and directories currently installed.) > Unpacking libc6-dev (from libc6-dev_2.8-20080505-0ubuntu7_i386.deb) ... > Selecting previously deselected package linux-libc-dev. > Unpacking linux-libc-dev (from linux-libc-dev_2.6.27-7.16_i386.deb) ... > dpckg: dependency problems prevent configuration of libc6-dev: > libc6-dev depends on libc6 (= 2.8-20080505-0ubuntu7); however: > Versions of libc6 on system is 2.7-10ubuntu3. > dpckg: error processing libc6-dev (--install): > dependency problems - leaving unconfigured > Setting up linux-libc-dev (2.6.27-7.16) ... > Errors were encountered while processing: > libc6-dev > > Where to from here? > > Brian > > -----Original Message----- > From: Antonio Olivares [mailto:olivares14031@xxxxxxxxx] > Sent: November 16, 2008 11:26 AM > To: Brian Voss > Cc: discuss@xxxxxxxxxxxxx > Subject: RE: BrianVoss, Canada kernel 2.6.24-19-generic > > > --- On Sun, 11/16/08, Brian Voss <bevoss@xxxxxxxx> wrote: > >> From: Brian Voss <bevoss@xxxxxxxx> >> Subject: RE: BrianVoss, Canada kernel 2.6.24-19-generic >> To: olivares14031@xxxxxxxxx >> Cc: discuss@xxxxxxxxxxxxx >> Date: Sunday, November 16, 2008, 8:20 AM >> Antonio, >> >> Thank you. What do I do with the libc6-dev and >> linux-libc-dev packages once >> I've downloaded them? > Install them with > $ sudo dpkg -i *.deb > > and it should work. Otherwise please post your error messages :) > > Regards, > > Antonio >> >> Brian >> >> -----Original Message----- >> From: Antonio Olivares [mailto:olivares14031@xxxxxxxxx] >> Sent: November 15, 2008 9:38 PM >> To: Brian Voss >> Cc: discuss@xxxxxxxxxxxxx >> Subject: Re: BrianVoss, Canada kernel 2.6.24-19-generic >> >> >> Brian, >> >> scanModem recommends that you get martian-20080625.tar.gz >> >> The modem has a Lucent/Agere/LSI Mars or Apollo DSP >> (digital signal >> processing) chipset. >> Support packages for 2.6.n kernels are at: >> http://linmodems.technion.ac.il/packages/ltmodem/kernel-2.6/martian/ >> Always use the most update for kernels after 2.6.20, >> currently >> martian-full-20080625.tar.gz >> For kernels 2.6.20 and less, usr >> martian-full-20080407.tar.gz. >> >> See DOCs/AgereDSP.txt for Details. >> >> I'll take a shot but not certain that it would be the >> way to do it. >> >> 1) download martian-full-20080625.tar.gz >> 2) download libc6-dev and linux-libc-dev (to be safe), look >> for them in >> http://packages.ubuntu.com >> 3) copy martian-full-20080625 to your home directory or >> Desktop whichever >> you prefer >> 4) extract martian-full-20080625.tar.gz with >> $ tar -zxvf martian-full-20080625.tar.gz >> 4) run >> $ make all >> $ sudo make install >> $ sudo modprobe martian_dev >> $ sudo martian_modem >> >> open up another terminal and do >> $ sudo wvdialconf /etc/wvdial.conf >> should find the modem driver /dev/ttySM0 and you would need >> to edit the >> /etc/wvdial.conf with your favorite editor and remove >> ";" and add your >> username, password and phone number. Add also a line >> "Carrier Check = no", >> it might also help if you put a line "Stupid Mode = >> 1". >> >> Get back to us if you succeed or need further help/advice. >> >> Regards, >> >> Antonio >> >> >> --- On Sat, 11/15/08, Brian Voss <bevoss@xxxxxxxx> >> wrote: >> >> > From: Brian Voss <bevoss@xxxxxxxx> >> > Subject: BrianVoss, Canada kernel 2.6.24-19-generic >> > To: Discuss@xxxxxxxxxxxxx >> > Date: Saturday, November 15, 2008, 2:53 PM >> > I sent a message yesterday with most of the following >> > information, to the >> > Discussion.Subscribe address. This is in case that >> message >> > did not get to >> > areal person! >> > >> > In 2007 I had my first experience with linux using >> ubuntu >> > 6.10 and I had >> > help from Firas Kraiem to set up the dial up modem. >> His >> > advice included >> > instructions for installing the package containing the >> C >> > compiler and my >> > kernel headers. Then he told me how to install >> > martian_modem and configure >> > wvdial. This worked well for ubuntu 6.10, although >> there >> > were error messages >> > when installing the build-essential package. >> > >> > I recently overwrote the 6.10 version with an install >> of >> > ubuntu 8.04, then >> > attempted to repeat the dial up modem support >> installation. >> > Again I received >> > error messages installing the build-essential package >> and >> > more error >> > messages with the martian_modem installation. At the >> end of >> > the process when >> > I entered sudo martian-modem the system responded that >> the >> > command is not >> > available. I used the martian and martian-full >> tarballs >> > from 20061203, which >> > may be one of my mistakes. >> > >> > Is there a way to ensure that what I have tried so far >> has >> > not corrupted the >> > system, or should I start over and re-install ubuntu >> 8.04? >> > >> > Can you provide an update on the advice Firas provided >> May >> > 10, 2007, to walk >> > me through the dial up modem support installation. Any >> help >> > will be greatly >> > appreciated, because I still seem to be a novice with >> linux >> > and the >> > implications of some of the steps I go through is not >> > entirely clear. Thank >> > you for help. The ModemData file follows: >> > >> > Only plain text email is forwarded by the >> > Discuss@xxxxxxxxxxxxx List >> > Server, >> > as HTML can contain viruses. Use as the email Subject >> > Line: >> > YourName, YourCountry kernel >> 2.6.24-19-generic >> > With this Subject Line cogent experts will be >> alerted, and >> > useful case >> > names left in the Archive. >> > YourCountry will enable Country specific guidance. >> Linux >> > experts in >> > YourCountry >> > can be found through: >> > http://www.linux.org/groups/index.html. >> > They will know your Country's modem code, which >> may be >> > essential for dialup >> > service. >> > Responses from Discuss@xxxxxxxxxxxxx are sometimes >> blocked >> > by an Internet >> > Provider mail filters. >> > So in a day, also check the Archived responses at >> > http://www.linmodems.org >> > -------------------------- System information >> > ---------------------------- >> > CPU=i686, >> > Linux version 2.6.24-19-generic (buildd@palmer) (gcc >> > version 4.2.3 (Ubuntu >> > 4.2.3-2ubuntu7)) #1 SMP Wed Jun 18 14:43:41 UTC 2008 >> > scanModem update of: 2008_11_06 >> > >> > There are no blacklisted modem drivers in >> /etc/modprobe* >> > files >> > Attached USB devices are: >> > ID 0402:5621 ALi Corp. USB 2.0 Storage Device >> > ID 04a9:108d Canon, Inc. >> > >> > USB modems not recognized >> > >> > For candidate card in slot 00:0c.0, firmware >> information >> > and bootup >> > diagnostics are: >> > PCI slot PCI ID SubsystemID Name >> > ---------- --------- --------- -------------- >> > 00:0c.0 11c1:0441 13e0:0410 Communication controller: >> > Agere Systems 56k >> > WinModem >> > >> > Modem interrupt assignment and sharing: >> > 11: 90740 XT-PIC-XT ehci_hcd:usb4 >> > --- Bootup diagnostics for card in PCI slot 00:0c.0 >> ---- >> > [ 35.704332] PCI: Sharing IRQ 11 with 0000:00:0c.0 >> > >> > === Finished firmware and bootup diagnostics, next >> deducing >> > cogent software. >> > === >> > >> > Predictive diagnostics for card in bus 00:0c.0: >> > Modem chipset detected on >> > NAME="Communication controller: Agere Systems 56k >> > WinModem " >> > CLASS=0780 >> > PCIDEV=11c1:0441 >> > SUBSYS=13e0:0410 >> > IRQ=11 >> > IDENT=Agere.DSP >> > >> > For candidate modem in: 00:0c.0 >> > 0780 Communication controller: Agere Systems 56k >> > WinModem >> > Primary device ID: 11c1:0441 >> > Support type needed or chipset: Agere.DSP >> > >> > >> > ----------------end Softmodem section -------------- >> > >> > The modem has a Lucent/Agere/LSI Mars or Apollo DSP >> > (digital signal >> > processing) chipset. >> > Support packages for 2.6.n kernels are at: >> > >> > >> http://linmodems.technion.ac.il/packages/ltmodem/kernel-2.6/martian/ >> > Always use the most update for kernels after 2.6.20, >> > currently >> > martian-full-20080625.tar.gz >> > For kernels 2.6.20 and less, usr >> > martian-full-20080407.tar.gz. >> > >> > See DOCs/AgereDSP.txt for Details. >> > >> > >> > Vendor 11c1 is Lucent Technologies with modem >> technology >> > now under LSI Inc. >> > Their Linux code developer/maintainer is Soumyendu >> Sarkar. >> > Support for a >> > chipset and its >> > continued maintenance is only initiated at the >> request of >> > a major chipset >> > buyer, >> > or comparable sponsor. Several different modem >> chipset >> > types are >> > produced: >> > with varying support under Linux. >> > Device ID Support Name Comment >> > --------- ------------- ----------- >> > ----------------------------- >> > 0480 serial_drivers Venus controller >> > chipset 1673JV7 >> > 0440-045d martian Mars/Apollo DSP >> (digital >> > signal processing) >> > chipsets >> > 0462 none 56K.V90/ADSL Wildwire >> > 048d none SV2P soft modem >> > 048(c or f) AGRSM SV2P soft modem >> > 0600 none soft modem, very few in >> the >> > field. >> > 0620 AGRSM Pinball soft modem, in >> some HP >> > desktop PCs >> > 011c11040 AGRSM hosted on High Definition >> Audio >> > cards >> > 062(1-3) none SV92PP,Pinball soft >> modem, in >> > some HP desktop >> > PCs >> > >> > martian - At >> > >> http://linmodems.technion.ac.il/packages/ltmodem/kernel-2.6/martian/ >> > AGRSM - At >> > >> http://linmodems.technion.ac.il/packages/ltmodem/11c11040/ >> > Compiling resources for a driver module pair: >> agrmodem.ko >> > + agrserial.ko >> > Use the agrsm-HDA-20080721-ALSA15.tar.bz2 or >> > agrsm-HDA-20080721.tar.bz2 >> > Read the agrsm_howto.txt. For 11c11040 chips, also >> the >> > HOWTO-Agere-11c11040-HDA.html >> > >> > 0x0441 -- Mars 2 - data/fax only >> > -------------- end Agere Systems section >> > ------------------- >> > >> > Completed candidate modem analyses. >> > >> > The base of the UDEV device file system is: >> /dev/.udev >> > >> > Versions adequately match for the compiler installed: >> > 4.2.3 >> > and the compiler used in kernel assembly: >> > 4.2.3 >> > >> > >> > >> > Minimal compiling resources appear complete: >> > make utility - /usr/bin/make >> > Compiler version 4.2 >> > linuc_headers base folder >> > /lib/modules/2.6.24-19-generic/build >> > >> > However some compilations and executable functions >> may >> > need additional >> > files, >> > in the FileNames.h (so called kernel >> "h"eaders) >> > collection installed in >> > /usr/include/ . >> > For martian_modem, additional required packages are >> > needed. The also >> > required headers of package libc6 are commonly >> installed by >> > default. >> > Compiling hsfmodem drivers does require >> linux-libc-dev and >> > libc6-dev >> > packages, for kernels 2.6.24 and later versions. >> > In not included on your install CD, search for them >> at >> > http://packages.ubuntu.com >> > or comparable Repository for other Linux distros. >> > When compiling ALSA drivers, the utility >> "patch" >> > will also be needed. >> > >> > >> > >> > >> > If a driver compilation fails, with message including >> some >> > lack of some >> > FileName.h (stdio.h for example), then >> > Some additional kernel-header files need installation >> to >> > /usr/include. The >> > minimal additional packages are libc6-dev >> > and any of its dependents, under Ubuntu linux-libc-dev >> > >> > If an alternate ethernet connection is available, >> > $ apt-get update >> > $ apt-get -s install linux-kernel-devel >> > will install needed packages. >> > For Debian/Ubuntu related distributions, run the >> following >> > command to >> > display the needed package list: >> > >> > Otherwise packages have to be found through >> > http://packages.ubuntu.com >> > Once downloaded and transferred into a Linux >> partition, >> > they can be installed alltogether with: >> > $ sudo dpkg -i *.deb >> > >> > >> > Checking pppd properties: >> > -rwsr-xr-- 1 root dip 269256 2007-10-04 15:57 >> > /usr/sbin/pppd >> > >> > In case of an "error 17" "serial >> > loopback" problem, see: >> > >> > >> http://linmodems.technion.ac.il/linmodems/archive-sixth/msg02637.html >> > >> > To enable dialout without Root permission do: >> > $ su - root (not for Ubuntu) >> > sudo chmod a+x /usr/sbin/pppd >> > or under Ubuntu related Linuxes >> > sudo chmod a+x /usr/sbin/pppd >> > >> > Checking settings of: /etc/ppp/options >> > asyncmap 0 >> > noauth >> > crtscts >> > lock >> > hide-password >> > modem >> > proxyarp >> > lcp-echo-interval 30 >> > lcp-echo-failure 4 >> > noipx >> > >> > In case of a message like: >> > Warning: Could not modify /etc/ppp/pap-secrets: >> > Permission denied >> > see >> > >> http://linmodems.technion.ac.il/bigarch/archive-sixth/msg04656.html >> > >> > Read Modem/DOCs/YourSystem.txt concerning other COMM >> > channels: eth0 >> > Which can interfere with Browser naviagation. >> > >> > Don't worry about the following, it is for >> experts >> > should trouble shooting >> > be necessary. >> > >> ========================================================== >> > >> > Checking for modem support lines: >> > -------------------------------------- >> > /device/modem symbolic link: >> > slmodemd created symbolic link /dev/ttySL0: >> > Within /etc/udev/ files: >> > >> > Within /etc/modprobe.conf files: >> > /etc/modprobe.d/alsa-base:options snd-atiixp-modem >> index=-2 >> > /etc/modprobe.d/alsa-base:options snd-via82xx-modem >> > index=-2 >> > /etc/modprobe.d/blacklist-modem:# Uncomment these >> entries >> > in order to >> > blacklist unwanted modem drivers >> > /etc/modprobe.d/blacklist-modem:# blacklist >> > snd-atiixp-modem >> > /etc/modprobe.d/blacklist-modem:# blacklist >> > snd-via82xx-modem >> > Within any ancient /etc/devfs files: >> > >> > Within ancient kernel 2.4.n /etc/module.conf >> files: >> > >> > --------- end modem support lines -------- >> > >> > >> > BrianVoss > > > > > > >
