John, Have you tried changing the init string from > Init2 = ATQ0 V1 E1 S0=0 &C1 &D2 +FCLASS=0 Init2 = ATQ0 V1 E1 S0=0 X3 &C1 &D2 +MS=90 or Init2 = ATQ0 V1 E1 S0=0 X3 &C1 &D2 +MS=34 It may also depend on your ISP. If the above fails, you may try at your own option, to read Jacques post-install advice at: http://linmodems.technion.ac.il/post-install.html HTH, Antonio --- On Thu, 10/23/08, John Anderson <riokerr@xxxxxxxxx> wrote: > From: John Anderson <riokerr@xxxxxxxxx> > Subject: No Carrier problem with Smartlink Modem > To: discuss@xxxxxxxxxxxxx > Date: Thursday, October 23, 2008, 5:56 PM > Hello, > > I have looked over the web site and have a problem > connecting to my ISP. I added the " Carrier Check = no > " and " Stupid Mode = yes " in > /etc/wvdial.conf. > > When I connect to my old ISP I get a connect message and > login prompt. I can't login since I no longer have an > account there. My current ISP drops me before connecting > giving me the " No Carrier " Message. I have > tried a few different access numbers and also tried dialing > in minicom. > > Here is a look at my config file: > > [Dialer Defaults] > Init1 = ATZ > Init2 = ATQ0 V1 E1 S0=0 &C1 &D2 +FCLASS=0 > Modem Type = Analog Modem > ISDN = 0 > New PPPD = yes > Phone = 18778490278 > Modem = /dev/ttySL0 > Username = <my user name not shown> > Password = <my password not shown> > Baud = 460800 > Carrier Check = no > Stupid Mode = yes > > If you have any more suggestions I can try I would be > happy! Here is the result of dmesg | grep slamr: > [ 16.216000] slamr: module license 'Smart Link > Ltd.' taints kernel. > [ 16.220000] slamr: SmartLink AMRMO modem. > [ 16.220000] slamr: probe 2003:8800 SL2800 card... > [ 16.220000] slamr: slamr0 is SL2800 card. > > I am using Ubuntu 7.10 I have an Encore ENF656-ESW-NDPR > Netodragon ND92XPA chipset internal PCI modem. I am using > ver. slmodem-2.9.11-20080817 and ungrab-winmodem-20080126. > > Here is the result from Pon/Poff: > > Oct 23 17:12:48 microkerr chat[11306]: -- got it > Oct 23 17:12:48 microkerr chat[11306]: send > (ATDT18778490278^M) > Oct 23 17:12:48 microkerr chat[11306]: expect (CONNECT) > Oct 23 17:12:48 microkerr chat[11306]: ^M > Oct 23 17:12:48 microkerr chat[11306]: ATDT18778490278^M^M > Oct 23 17:13:11 microkerr chat[11306]: NO CARRIER > Oct 23 17:13:11 microkerr chat[11306]: -- failed > Oct 23 17:13:11 microkerr chat[11306]: Failed (NO CARRIER) > Oct 23 17:13:11 microkerr pppd[11304]: Connect script > failed > Oct 23 17:13:12 microkerr pppd[11304]: Exit. > > Any suggestions would be gladly appreciated! It is > probably some sort of configuration error that I can't > figure out since I get a login prompt to the ISP I used to > use in the past. > > Thank you for your time! > > John > > > > __________________________________________________________________ > Yahoo! Canada Toolbar: Search from anywhere on the web, and > bookmark your favourite sites. Download it now at > http://ca.toolbar.yahoo.com.
