Re: [igor@xxxxxxxxxx: Cannot see my softmodem]

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



Message got through.  However drivers are kind of tricky to get working and a very difficult task:

AGRSM - At http://linmodems.technion.ac.il/packages/ltmodem/11c11040/
  Compiling resources for a driver module pair: agrmodem.ko + agrserial.ko
  Use the  agrsm-HDA-20080721-ALSA15.tar.bz2 or agrsm-HDA-20080721.tar.bz2
  Read the agrsm_howto.txt.  For 11c11040 chips, also the HOWTO-Agere-11c11040-HDA.html

Regards,

Antonio 


--- On Sun, 10/5/08, Igor Chudov <igor@xxxxxxxxxx> wrote:

> From: Igor Chudov <igor@xxxxxxxxxx>
> Subject: [igor@xxxxxxxxxx: Cannot see my softmodem]
> To: discuss@xxxxxxxxxxxxx
> Date: Sunday, October 5, 2008, 9:07 AM
> I do not think that my yesterday message worked, resending.
> 
> i
> 
> ----- Forwarded message from Igor Chudov
> <igor@xxxxxxxxxx> -----
> 
> From: Igor Chudov <igor@xxxxxxxxxx>
> To: discuss@xxxxxxxxxxxxx
> Subject: Cannot see my softmodem
> Reply-To: igor@xxxxxxxxxx
> 
> Hello, I have a Fujitsu S6510 laptop , and it does not see
> my
> modem. Here's the output of scanModem. Any help will be
> most
> gratefully appreciated. 
> 
> I *think* that I am subscribed to this list, but I am not
> sure if it
> worked, so please Cc: your replies to me.
> 
> thanks
> 
> ======================================================================
>  Only plain text email is forwarded by the 
> Discuss@xxxxxxxxxxxxx List Server,
>  as HTML can contain viruses. Use as the email Subject
> Line:
>            YourName, YourCountry  kernel 2.6.27-4-generic 
>  With this Subject Line cogent experts will be alerted, and
> useful case names left in the Archive.
>  YourCountry will enable Country specific guidance. Linux
> experts in YourCountry 
>  can be found through:
> http://www.linux.org/groups/index.html.
> They will know your Country's modem code, which may be
> essential for dialup service.
> Responses from Discuss@xxxxxxxxxxxxx are sometimes blocked
> by an Internet Provider mail filters.
>  So in a day, also check the Archived responses at
> http://www.linmodems.org 
> --------------------------  System information
> ----------------------------
> CPU=i686,  
> Linux version 2.6.27-4-generic (buildd@rothera) (gcc
> version 4.3.2 (Ubuntu 4.3.2-1ubuntu7) ) #1 SMP Wed Sep 24
> 01:30:51 UTC 2008
>  scanModem update of:  2008_08_26
> 
>  There are no blacklisted modem drivers in /etc/modprobe* 
> files 
> Attached USB devices are:
>  ID 1d6b:0001 Linux Foundation 1.1 root hub
>  ID 1d6b:0002 Linux Foundation 2.0 root hub
>  ID 1d6b:0001 Linux Foundation 1.1 root hub
>  ID 1d6b:0001 Linux Foundation 1.1 root hub
>  ID 1d6b:0001 Linux Foundation 1.1 root hub
>  ID 1d6b:0001 Linux Foundation 1.1 root hub
>  ID 0c24:000f Taiyo Yuden Bluetooth Driver (V2.0+EDR)
>  ID 1d6b:0001 Linux Foundation 1.1 root hub
>  ID 1d6b:0002 Linux Foundation 2.0 root hub
>  ID 046d:09b2 Logitech, Inc. 
>  ID 1d6b:0002 Linux Foundation 2.0 root hub
> 
> USB modems not recognized
> 
> For candidate card in slot 00:1b.0, firmware information
> and bootup diagnostics are:
>  PCI slot	PCI ID		SubsystemID	Name
>  ----------	---------	---------	--------------
>  00:1b.0	8086:284b	10cf:142d	Audio device: Intel
> Corporation 82801H 
> 
>  Modem interrupt assignment and sharing: 
>  21:        404        402   IO-APIC-fasteoi   HDA Intel
>  --- Bootup diagnostics for card in PCI slot 00:1b.0 ----
> [    0.504668] PCI: 0000:00:1b.0 reg 10 64bit mmio:
> [fc700000, fc703fff]
> [    0.504728] pci 0000:00:1b.0: PME# supported from D0
> D3hot D3cold
> [    0.504784] pci 0000:00:1b.0: PME# disabled
> [   25.428244] HDA Intel 0000:00:1b.0: power state changed
> by ACPI to D0
> [   25.428259] HDA Intel 0000:00:1b.0: PCI INT A -> GSI
> 21 (level, low) -> IRQ 21
> [   25.428288] HDA Intel 0000:00:1b.0: setting latency
> timer to 64
> 
>  The PCI slot 00:1b.0 of the modem card may be disabled
> early in 
>  a bootup process,  but then enabled later. If modem
> drivers load 
>  but the  modem is not responsive, read DOCs/Bootup.txt
> about possible fixes.
>  Send dmesg.txt along with ModemData.txt to
> discuss@xxxxxxxxxxxxx
>  if help is needed.
>  
> 
> 
> ===== Advanced Linux Sound Architecture (ALSA) diagnostics
> ===== 
> The ALSA packages provide audio support and also drivers
> for some modems.
> ALSA diagnostics are written during bootup to /proc/asound/
> folders.
> 
> The ALSA verion is 1.0.17
> The modem cards detected by "aplay -l"  are: None
> 
> 
> The /proc/asound/pcm file reports:
> -----------------------
> 00-01: ALC262 Digital : ALC262 Digital : playback 1
> 00-00: ALC262 Analog : ALC262 Analog : playback 1 : capture
> 1
> 
> about /proc/asound/cards:
> ------------------------
>  0 [Intel          ]: HDA-Intel - HDA Intel
>                       HDA Intel at 0xfc700000 irq 21
> 
>  PCI slot 00:1b.0 has a High Definition Audio Card
>  The drivers are in the kernel modules tree at:
> 
> /lib/modules/last-good-boot/kernel/sound/pci/hda/snd-hda-intel.ko
> /lib/modules/2.6.27-4-generic/kernel/sound/pci/hda/snd-hda-intel.ko
>  The modem codec file for the HDA card is:
> /proc/asound/card0/codec#1
> --------------------------------------------------------
> Codec: LSI ID 1040
> Address: 1
> Vendor Id: 0x11c11040
> Subsystem Id: 0x11c10001
> Revision Id: 0x100200
> Modem Function Group: 0x1
> 
>  The audio card hosts a softmodem chip:  0x11c11040
> If not a Conexant modem, the driver
> agrmodem+agrserial+patched_snd-hda-intel with its dependent
> drivers:
> 
> ----------
> provide audio + modem support with the modem chip residing
> on the subsystem.
> Any particular card can host any one of several soft modem
> chips. 
> 
> === Finished firmware and bootup diagnostics, next deducing
> cogent software. ===
> 
> Predictive  diagnostics for card in bus 00:1b.0:
> 	Modem chipset  detected on
> NAME="Audio device: Intel Corporation 82801H "
> CLASS=0403
> PCIDEV=8086:284b
> SUBSYS=10cf:142d
> IRQ=21
> HDA=8086:284b
> SOFT=8086:284b.HDA
> CHIP=0x11c11040
> IDENT=11c11040
> Driver=agrmodem+agrserial+patched_snd-hda-intel
> 
>  For candidate modem in:  00:1b.0
>    0403 Audio device: Intel Corporation 82801H 
>       Primary device ID:  8086:284b
>     Subsystem PCI_id  10cf:142d 
>     Softmodem codec or chipset from diagnostics: 0x11c11040
>                                from    Archives: 
>                         The HDA card softmodem chip is
> 0x11c11040
>       
> 
> Support type needed or chipset:	11c11040
> 
> ----------------end Softmodem section --------------
> 
> Writing DOCs/Intel.txt
> 
>  Vendor 11c1 is Lucent Technologies with modem technology
> now under LSI Inc. 
> Their Linux  code developer/maintainer is Soumyendu Sarkar.
> Support for a chipset and its 
>  continued maintenance is only initiated at the request of
> a major chipset buyer,
>  or comparable sponsor. Several different  modem chipset
> types  are produced: 
>  with varying support under Linux.
>  Device ID   Support        Name           Comment
>  ---------   -------------  -----------   
> -----------------------------
>  0480        serial_drivers Venus           controller
> chipset 1673JV7
>  0440-045d   martian        Mars/Apollo     DSP (digital
> signal processing) chipsets
>  0462        none           56K.V90/ADSL Wildwire 
>  048d none           	    SV2P            soft modem 
>  048(c or f) AGRSM          SV2P            soft modem
>  0600        none           soft modem, very few in the
> field.
>  0620        AGRSM          Pinball  soft modem, in some HP
> desktop PCs
>  011c11040   AGRSM          hosted on High Definition Audio
> cards
>  062(1-3)    none           SV92PP,Pinball  soft modem, in
> some HP desktop PCs
> 
> martian - At
> http://linmodems.technion.ac.il/packages/ltmodem/kernel-2.6/martian/
> AGRSM - At
> http://linmodems.technion.ac.il/packages/ltmodem/11c11040/
>   Compiling resources for a driver module pair: agrmodem.ko
> + agrserial.ko
>   Use the  agrsm-HDA-20080721-ALSA15.tar.bz2 or
> agrsm-HDA-20080721.tar.bz2
>   Read the agrsm_howto.txt.  For 11c11040 chips, also the
> HOWTO-Agere-11c11040-HDA.html
> 
> -------------- end Agere Systems section
> -------------------
> 
>  Completed candidate modem analyses.
> 
>  The base of the UDEV device file system is: /dev/.udev
> 
>  Versions adequately match for the compiler installed:
> 4.3.2
>              and the compiler used in kernel assembly:
> 4.3.2
> 
> 
>  
>  Minimal compiling resources appear complete:
>    make utility - /usr/bin/make
>    Compiler version 4.3
>    linuc_headers base folder
> /lib/modules/2.6.27-4-generic/build
> 
>  However some compilations and executable functions may
> need additional files,
>  in the FileNames.h (so called kernel "h"eaders)
> collection installed in  /usr/include/ .
>  For martian_modem, additional required packages are
> needed. The also required headers of package libc6 are
> commonly installed by default. 
>  Compiling hsfmodem drivers does require linux-libc-dev and
> libc6-dev packages, for kernels 2.6.24 and later versions.
>  In not included on your install CD, search for them at
> http://packages.ubuntu.com
>  or comparable Repository for other Linux distros.
>  When compiling ALSA drivers, the utility "patch"
> will also be needed.
> 
> 
> Compressed files at: /usr/src/linux-2.6.26.5.tar.bz2
> 
> 
> If a driver compilation fails, with message including some
> lack of some FileName.h (stdio.h for example), then
> Some additional kernel-header files need installation to
> /usr/include. The minimal additional packages are libc6-dev
> and any of its dependents, under Ubuntu linux-libc-dev
> 
> If an alternate ethernet connection is available,
> $  apt-get update
> $  apt-get -s install linux-kernel-devel
> will install needed packages.
> For Debian/Ubuntu related distributions, run the following
> command to display the needed package list:
> 
> Otherwise packages have to be found through
> http://packages.ubuntu.com
> Once downloaded and transferred into a Linux partition,
> they can be installed alltogether with:
> $ sudo dpkg -i *.deb
> 
> 
> Checking pppd properties:
> 	-rwsr-xr-- 1 root dip 273064 Jun 23 07:12 /usr/sbin/pppd
> 
> In case of an "error 17" "serial
> loopback" problem, see:
>    
> http://linmodems.technion.ac.il/linmodems/archive-sixth/msg02637.html
> 
> To enable dialout without Root permission do:
> 	$ su - root  (not for Ubuntu)
>         sudo chmod a+x /usr/sbin/pppd
> or under Ubuntu related Linuxes
> 	sudo chmod a+x /usr/sbin/pppd
> 
> Checking settings of:	/etc/ppp/options
> asyncmap 0
> noauth
> crtscts
> lock
> hide-password
> modem
> proxyarp
> lcp-echo-interval 30
> lcp-echo-failure 4
> noipx
> 
> In case of a message like:
>    Warning: Could not modify /etc/ppp/pap-secrets:
> Permission denied
> see
> http://linmodems.technion.ac.il/bigarch/archive-sixth/msg04656.html
> 
> Read Modem/DOCs/YourSystem.txt concerning other COMM
> channels: eth0 wlan0 wmaster0
> Which can interfere with Browser naviagation.
> 
>  Don't worry about the following, it is for experts
> should trouble shooting be necessary.
> ==========================================================
> 
>  Checking for modem support lines:
>  --------------------------------------
>      /device/modem symbolic link:   
> slmodemd created symbolic link /dev/ttySL0:  
>      Within /etc/udev/ files:
> 
>      Within /etc/modprobe.conf files:
> /etc/modprobe.d/blacklist-modem:# Uncomment these entries
> in order to blacklist unwanted modem drivers
> /etc/modprobe.d/blacklist-modem:# blacklist
> snd-atiixp-modem
> /etc/modprobe.d/blacklist-modem:# blacklist
> snd-via82xx-modem
> /etc/modprobe.d/alsa-base:options snd-atiixp-modem index=-2
> /etc/modprobe.d/alsa-base:options snd-via82xx-modem
> index=-2
>      Within any ancient /etc/devfs files:
> 
>      Within ancient kernel 2.4.n /etc/module.conf files:
> 
> --------- end modem support lines --------
> 
> 
> ----- End forwarded message -----


      

[Index of Archives]     [Linux Media Development]     [Asterisk]     [DCCP]     [Netdev]     [X.org]     [Xfree86]     [Fedora Women]     [Linux USB]

  Powered by Linux