Attached you may find also the dmes.txt Thank you in advanced ---------------------------- Original Message ---------------------------- Subject: Re: Mulet CUBA 2.6.24-21-386 From: "Antonio Olivares" <olivares14031@xxxxxxxxx> Date: Sat, October 4, 2008 21:33 To: mulet@xxxxxxxxxxxx Cc: discuss@xxxxxxxxxxxxx -------------------------------------------------------------------------- Mulet, Please also forward this to list, they can see things that I might not see. I do not know how to advice, but more users that have encountered this error before may be able to help. You can also send us dmesg.txt, the part which recommends you do this: Modem interrupt assignment and sharing: 10: 121 XT-PIC-XT ehci_hcd:usb4, ohci1394, Intel 82801DB-ICH4, eth1 --- Bootup diagnostics for card in PCI slot 00:1f.6 ---- [ 10.155032] ACPI: PCI Interrupt 0000:00:1f.6[B] -> Link [LNKB] -> GSI 10 (level, low) -> IRQ 10 [ 10.155041] ACPI: PCI interrupt for device 0000:00:1f.6 disabled [ 37.890938] ACPI: PCI Interrupt 0000:00:1f.6[B] -> Link [LNKB] -> GSI 10 (level, low) -> IRQ 10 [ 37.890958] PCI: Setting latency timer of device 0000:00:1f.6 to 64 [ 38.143428] ACPI: PCI interrupt for device 0000:00:1f.6 disabled [ 38.143576] Intel ICH Modem: probe of 0000:00:1f.6 failed with error -13 The PCI slot 00:1f.6 of the modem card may be disabled early in a bootup process, but then enabled later. If modem drivers load but the modem is not responsive, read DOCs/Bootup.txt about possible fixes. Send dmesg.txt along with ModemData.txt to discuss@xxxxxxxxxxxxx if help is needed. Regards, Antonio On 10/4/08, mulet@xxxxxxxxxxxx <mulet@xxxxxxxxxxxx> wrote: > Antonio, I get the following error message. Any idea? > > > error: mixer setup: attach hw:1 error: No such file or directory > ALSA lib conf.c:3952:(snd_config_expand) Unknown parameters 1 > ALSA lib pcm.c:2145:(snd_pcm_open_noupdate) Unknown PCM modem:1 > error: alsa setup: cannot open playback device 'modem:1': Invalid argument > error: cannot setup device `modem:1' > > > >> Mulet, >> >> Your modem is supported: >> >> Support type needed or chipset: slmodemd >> >> An ALSA (Advanced Linux Sound Architecture) modem driver: snd-intel8x0m >> provides Low Level support enabling contact with the modem hardware. >> For all BUT Conexant chip soft modems (using hsfmodem software) >> complementary High Level support is through a Smartlink utility: >> slmodemd >> >> Download from http://linmodems.technion.ac.il/packages/smartlink/ >> the package SLMODEMD.gcc4.2.tar.gz having a compiled slmodemd. Unpack >> under Linux with: >> $ tar zxf SLMODEMD.gcc4.2.tar.gz >> and read instructions therein. But briefly, the modem is setup with >> command: >> sudo slmodemd -c YOUR_COUNTRY --alsa modem:1 >> reporting dynamic creation of ports: >> /dev/ttySL0 --> /dev/pts/N , with N some number >> Read DOCs/Smartlink.txt and Modem/DOCs/YourSystem.txt for follow through >> guidance. >> >> >> However, you might run into trouble >> >> Modem interrupt assignment and sharing: >> 10: 121 XT-PIC-XT ehci_hcd:usb4, ohci1394, Intel >> 82801DB-ICH4, eth1 >> --- Bootup diagnostics for card in PCI slot 00:1f.6 ---- >> [ 10.155032] ACPI: PCI Interrupt 0000:00:1f.6[B] -> Link [LNKB] -> GSI >> 10 (level, low) -> IRQ 10 >> [ 10.155041] ACPI: PCI interrupt for device 0000:00:1f.6 disabled >> [ 37.890938] ACPI: PCI Interrupt 0000:00:1f.6[B] -> Link [LNKB] -> GSI >> 10 (level, low) -> IRQ 10 >> [ 37.890958] PCI: Setting latency timer of device 0000:00:1f.6 to 64 >> [ 38.143428] ACPI: PCI interrupt for device 0000:00:1f.6 disabled >> [ 38.143576] Intel ICH Modem: probe of 0000:00:1f.6 failed with error >> -13 >> >> The PCI slot 00:1f.6 of the modem card may be disabled early in >> a bootup process, but then enabled later. If modem drivers load >> but the modem is not responsive, read DOCs/Bootup.txt about possible >> fixes. >> Send dmesg.txt along with ModemData.txt to discuss@xxxxxxxxxxxxx >> if help is needed. >> >> >> Regards, >> >> Antonio >> >> On Thu, Oct 2, 2008 at 3:35 PM, <mulet@xxxxxxxxxxxx> wrote: >>> -------------------------- System information >>> ---------------------------- >>> CPU=i686, >>> Linux version 2.6.24-21-386 (buildd@palmer) (gcc version 4.2.3 (Ubuntu >>> 4.2.3-2ubuntu7)) #1 Mon Aug 25 16:58:26 UTC 2008 >>> scanModem update of: 2008_08_26 >>> The modem symbolic link is /dev/modem -> ttySL0 >>> There are no blacklisted modem drivers in /etc/modprobe* files >>> Attached USB devices are: >>> ID 04b4:6560 Cypress Semiconductor Corp. CY7C65640 USB-2.0 "TetraHub" >>> ID 04d9:0499 Holtek Semiconductor, Inc. >>> >>> USB modems not recognized >>> >>> For candidate card in slot 00:1f.6, firmware information and bootup >>> diagnostics are: >>> PCI slot PCI ID SubsystemID Name >>> ---------- --------- --------- -------------- >>> 00:1f.6 8086:24c6 1025:0051 Modem: Intel Corporation >>> 82801DB/DBL/DBM >>> >>> Modem interrupt assignment and sharing: >>> 10: 121 XT-PIC-XT ehci_hcd:usb4, ohci1394, Intel >>> 82801DB-ICH4, eth1 >>> --- Bootup diagnostics for card in PCI slot 00:1f.6 ---- >>> [ 10.155032] ACPI: PCI Interrupt 0000:00:1f.6[B] -> Link [LNKB] -> GSI >>> 10 (level, low) -> IRQ 10 >>> [ 10.155041] ACPI: PCI interrupt for device 0000:00:1f.6 disabled >>> [ 37.890938] ACPI: PCI Interrupt 0000:00:1f.6[B] -> Link [LNKB] -> GSI >>> 10 (level, low) -> IRQ 10 >>> [ 37.890958] PCI: Setting latency timer of device 0000:00:1f.6 to 64 >>> [ 38.143428] ACPI: PCI interrupt for device 0000:00:1f.6 disabled >>> [ 38.143576] Intel ICH Modem: probe of 0000:00:1f.6 failed with error >>> -13 >>> >>> The PCI slot 00:1f.6 of the modem card may be disabled early in >>> a bootup process, but then enabled later. If modem drivers load >>> but the modem is not responsive, read DOCs/Bootup.txt about possible >>> fixes. >>> Send dmesg.txt along with ModemData.txt to discuss@xxxxxxxxxxxxx >>> if help is needed. >>> >>> >>> >>> ===== Advanced Linux Sound Architecture (ALSA) diagnostics ===== >>> The ALSA packages provide audio support and also drivers for some >>> modems. >>> ALSA diagnostics are written during bootup to /proc/asound/ folders. >>> >>> The ALSA verion is 1.0.16 >>> The modem cards detected by "aplay -l" are: None >>> >>> >>> The /proc/asound/pcm file reports: >>> ----------------------- >>> 00-04: Intel ICH - IEC958 : Intel 82801DB-ICH4 - IEC958 : playback 1 >>> 00-03: Intel ICH - ADC2 : Intel 82801DB-ICH4 - ADC2 : capture 1 >>> 00-02: Intel ICH - MIC2 ADC : Intel 82801DB-ICH4 - MIC2 ADC : capture 1 >>> 00-01: Intel ICH - MIC ADC : Intel 82801DB-ICH4 - MIC ADC : capture 1 >>> 00-00: Intel ICH : Intel 82801DB-ICH4 : playback 1 : capture 1 >>> >>> about /proc/asound/cards: >>> ------------------------ >>> 0 [I82801DBICH4 ]: ICH4 - Intel 82801DB-ICH4 >>> Intel 82801DB-ICH4 with ALC202 at irq 10 >>> === Finished firmware and bootup diagnostics, next deducing cogent >>> software. === >>> >>> Predictive diagnostics for card in bus 00:1f.6: >>> Modem chipset detected on >>> NAME="Modem: Intel Corporation 82801DB/DBL/DBM " >>> CLASS=0703 >>> PCIDEV=8086:24c6 >>> SUBSYS=1025:0051 >>> IRQ=10 >>> SOFT=8086:24c6.MC97 >>> CodecArchived=SIL27 >>> IDENT=slmodemd >>> SLMODEMD_DEVICE=modem:1 >>> Driver=snd-intel8x0m >>> >>> For candidate modem in: 00:1f.6 >>> 0703 Modem: Intel Corporation 82801DB/DBL/DBM >>> Primary device ID: 8086:24c6 >>> Subsystem PCI_id 1025:0051 >>> Softmodem codec or chipset from diagnostics: >>> from Archives: SIL27 >>> >>> >>> >>> Support type needed or chipset: slmodemd >>> >>> An ALSA (Advanced Linux Sound Architecture) modem driver: >>> snd-intel8x0m >>> provides Low Level support enabling contact with the modem hardware. >>> For all BUT Conexant chip soft modems (using hsfmodem software) >>> complementary High Level support is through a Smartlink utility: >>> slmodemd >>> >>> Download from http://linmodems.technion.ac.il/packages/smartlink/ >>> the package SLMODEMD.gcc4.2.tar.gz having a compiled slmodemd. Unpack >>> under Linux with: >>> $ tar zxf SLMODEMD.gcc4.2.tar.gz >>> and read instructions therein. But briefly, the modem is setup with >>> command: >>> sudo slmodemd -c YOUR_COUNTRY --alsa modem:1 >>> reporting dynamic creation of ports: >>> /dev/ttySL0 --> /dev/pts/N , with N some number >>> Read DOCs/Smartlink.txt and Modem/DOCs/YourSystem.txt for follow >>> through >>> guidance. >>> >>> ----------------end Softmodem section -------------- >>> >>> Writing DOCs/Intel.txt >>> Writing DOCs/Smartlink.txt >>> ============ end Smartlink section ===================== >>> >>> Completed candidate modem analyses. >>> >>> The base of the UDEV device file system is: /dev/.udev >>> >>> Versions adequately match for the compiler installed: 4.2.3 >>> and the compiler used in kernel assembly: 4.2.4 >>> >>> linux-headers-2.6.24-21-386 resources needed for compiling are not >>> manifestly ready! >>> >>> If compiling is necessary packages must be installed, providing: >>> linux-headers-2.6.24-21-386 >>> Compressed files at: /usr/src/sl-modem.tar.bz2 >>> >>> >>> If a driver compilation fails, with message including some lack of some >>> FileName.h (stdio.h for example), then >>> Some additional kernel-header files need installation to /usr/include. >>> The >>> minimal additional packages are libc6-dev >>> and any of its dependents, under Ubuntu linux-libc-dev >>> >>> If an alternate ethernet connection is available, >>> $ apt-get update >>> $ apt-get -s install linux-kernel-devel >>> will install needed packages. >>> For Debian/Ubuntu related distributions, run the following command to >>> display the needed package list: >>> >>> Otherwise packages have to be found through http://packages.ubuntu.com >>> Once downloaded and transferred into a Linux partition, >>> they can be installed alltogether with: >>> $ sudo dpkg -i *.deb >>> >>> >>> Checking pppd properties: >>> -rwsr-xr-- 1 root dip 269256 2007-10-04 15:57 /usr/sbin/pppd >>> >>> In case of an "error 17" "serial loopback" problem, see: >>> http://linmodems.technion.ac.il/linmodems/archive-sixth/msg02637.html >>> >>> To enable dialout without Root permission do: >>> $ su - root (not for Ubuntu) >>> sudo chmod a+x /usr/sbin/pppd >>> or under Ubuntu related Linuxes >>> sudo chmod a+x /usr/sbin/pppd >>> >>> Checking settings of: /etc/ppp/options >>> asyncmap 0 >>> noauth >>> crtscts >>> lock >>> hide-password >>> modem >>> proxyarp >>> lcp-echo-interval 30 >>> lcp-echo-failure 4 >>> noipx >>> >>> In case of a message like: >>> Warning: Could not modify /etc/ppp/pap-secrets: Permission denied >>> see http://linmodems.technion.ac.il/bigarch/archive-sixth/msg04656.html >>> >>> Read Modem/DOCs/YourSystem.txt concerning other COMM channels: eth0 >>> Which can interfere with Browser naviagation. >>> >>> Don't worry about the following, it is for experts should trouble >>> shooting be necessary. >>> ========================================================== >>> >>> # start/stop the daemon when the USB modem is connected >>> KERNEL=="slusb[0-9]*", GROUP="dialout", >>> RUN+="/etc/init.d/sl-modem-daemon" >>> Checking for modem support lines: >>> -------------------------------------- >>> /device/modem symbolic link: lrwxrwxrwx 1 root root 6 2008-10-02 >>> 11:21 /dev/modem -> ttySL0 >>> slmodemd created symbolic link /dev/ttySL0: >>> Within /etc/udev/ files: >>> /etc/udev/rules.d/030_sl-modem-daemon.rules:# start/stop the daemon when >>> the USB modem is connected >>> /etc/udev/rules.d/030_sl-modem-daemon.rules:KERNEL=="slusb[0-9]*", >>> GROUP="dialout", RUN+="/etc/init.d/sl-modem-daemon" >>> /etc/udev/sl-modem-daemon.rules:# start/stop the daemon when the USB >>> modem >>> is connected >>> /etc/udev/sl-modem-daemon.rules:KERNEL=="slusb[0-9]*", GROUP="dialout", >>> RUN+="/etc/init.d/sl-modem-daemon" >>> Within /etc/modprobe.conf files: >>> /etc/modprobe.d/blacklist-modem:# Uncomment these entries in order to >>> blacklist unwanted modem drivers >>> /etc/modprobe.d/blacklist-modem:# blacklist snd-atiixp-modem >>> /etc/modprobe.d/blacklist-modem:# blacklist snd-via82xx-modem >>> /etc/modprobe.d/alsa-base:options snd-atiixp-modem index=-2 >>> /etc/modprobe.d/alsa-base:options snd-via82xx-modem index=-2 >>> /etc/modprobe.d/sl-modem-daemon.modutils:install slamr modprobe >>> --ignore-install ungrab-winmodem ; modprobe --ignore-install slamr; >>> test >>> -e /dev/slamr0 || (/bin/mknod -m 660 /dev/slamr0 c 242 0 2>/dev/null && >>> chgrp dialout /dev/slamr0) >>> Within any ancient /etc/devfs files: >>> >>> Within ancient kernel 2.4.n /etc/module.conf files: >>> >>> --------- end modem support lines -------- >>> >>> >>> >>> >>> ----------------------------------------- >>> This email was sent using SquirrelMail. >>> >>> -- >>> This message has been scanned for viruses and >>> dangerous content by MailScanner, and is >>> believed to be clean. >>> >>> >> >> -- >> This message has been scanned for viruses and >> dangerous content by MailScanner, and is >> believed to be clean. >> > > > > ----------------------------------------- > This email was sent using SquirrelMail. > > -- > This message has been scanned for viruses and > dangerous content by MailScanner, and is > believed to be clean. > > -- This message has been scanned for viruses and dangerous content by MailScanner, and is believed to be clean. ----------------------------------------- This email was sent using SquirrelMail. -- This message has been scanned for viruses and dangerous content by MailScanner, and is believed to be clean.
CPU0 0: 2994992 XT-PIC-XT timer 1: 18119 XT-PIC-XT i8042 2: 0 XT-PIC-XT cascade 3: 4 XT-PIC-XT 4: 7 XT-PIC-XT 5: 3 XT-PIC-XT 6: 262754 XT-PIC-XT uhci_hcd:usb1, uhci_hcd:usb2, uhci_hcd:usb3, yenta, yenta, yenta, eth0 7: 1 XT-PIC-XT parport0 8: 2 XT-PIC-XT rtc 9: 536320 XT-PIC-XT acpi 10: 121 XT-PIC-XT ehci_hcd:usb4, ohci1394, Intel 82801DB-ICH4, eth1 11: 3 XT-PIC-XT 12: 1584 XT-PIC-XT i8042 14: 29894 XT-PIC-XT libata 15: 75653 XT-PIC-XT libata NMI: 0 Non-maskable interrupts LOC: 0 Local timer interrupts TRM: 0 Thermal event interrupts SPU: 0 Spurious interrupts ERR: 0 MIS: 0 [ 0.000000] Initializing cgroup subsys cpu [ 0.000000] Linux version 2.6.24-21-386 (buildd@palmer) (gcc version 4.2.3 (Ubuntu 4.2.3-2ubuntu7)) #1 Mon Aug 25 16:58:26 UTC 2008 (Ubuntu 2.6.24-21.42-386) [ 0.000000] BIOS-provided physical RAM map: [ 0.000000] BIOS-e820: 0000000000000000 - 000000000009f800 (usable) [ 0.000000] BIOS-e820: 000000000009f800 - 00000000000a0000 (reserved) [ 0.000000] BIOS-e820: 00000000000dc000 - 0000000000100000 (reserved) [ 0.000000] BIOS-e820: 0000000000100000 - 000000003fee0000 (usable) [ 0.000000] BIOS-e820: 000000003fee0000 - 000000003feec000 (ACPI data) [ 0.000000] BIOS-e820: 000000003feec000 - 000000003ff00000 (ACPI NVS) [ 0.000000] BIOS-e820: 000000003ff00000 - 0000000040000000 (reserved) [ 0.000000] BIOS-e820: 00000000fec10000 - 00000000fec20000 (reserved) [ 0.000000] BIOS-e820: 00000000ff800000 - 00000000ffc00000 (reserved) [ 0.000000] BIOS-e820: 00000000fffffc00 - 0000000100000000 (reserved) [ 0.000000] 126MB HIGHMEM available. [ 0.000000] 896MB LOWMEM available. [ 0.000000] Entering add_active_range(0, 0, 261856) 0 entries of 256 used [ 0.000000] Zone PFN ranges: [ 0.000000] DMA 0 -> 4096 [ 0.000000] Normal 4096 -> 229376 [ 0.000000] HighMem 229376 -> 261856 [ 0.000000] Movable zone start PFN for each node [ 0.000000] early_node_map[1] active PFN ranges [ 0.000000] 0: 0 -> 261856 [ 0.000000] On node 0 totalpages: 261856 [ 0.000000] DMA zone: 32 pages used for memmap [ 0.000000] DMA zone: 0 pages reserved [ 0.000000] DMA zone: 4064 pages, LIFO batch:0 [ 0.000000] Normal zone: 1760 pages used for memmap [ 0.000000] Normal zone: 223520 pages, LIFO batch:31 [ 0.000000] HighMem zone: 253 pages used for memmap [ 0.000000] HighMem zone: 32227 pages, LIFO batch:7 [ 0.000000] Movable zone: 0 pages used for memmap [ 0.000000] DMI present. [ 0.000000] ACPI: RSDP signature @ 0xC00F6020 checksum 0 [ 0.000000] ACPI: RSDP 000F6020, 0014 (r0 ACER ) [ 0.000000] ACPI: RSDT 3FEE52EA, 0030 (r1 ACER TM8000 20020608 LTP 0) [ 0.000000] ACPI: FACP 3FEEBF2C, 0074 (r1 ACER TM8000 20020608 PTL 50) [ 0.000000] ACPI: DSDT 3FEE531A, 6C12 (r1 ACER TM8000 20020608 MSFT 100000E) [ 0.000000] ACPI: FACS 3FEFCFC0, 0040 [ 0.000000] ACPI: HPET 3FEEBFA0, 0038 (r1 ACER TM8000 20020608 PTL 0) [ 0.000000] ACPI: BOOT 3FEEBFD8, 0028 (r1 ACER TM8000 20020608 LTP 1) [ 0.000000] ACPI: DMI detected: Acer [ 0.000000] ACPI: PM-Timer IO Port: 0x1008 [ 0.000000] ACPI: HPET id: 0x8086a201 base: 0x0 is invalid [ 0.000000] Allocating PCI resources starting at 50000000 (gap: 40000000:bec10000) [ 0.000000] swsusp: Registered nosave memory region: 000000000009f000 - 00000000000a0000 [ 0.000000] swsusp: Registered nosave memory region: 00000000000a0000 - 00000000000dc000 [ 0.000000] swsusp: Registered nosave memory region: 00000000000dc000 - 0000000000100000 [ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 259811 [ 0.000000] Kernel command line: root=UUID=8da9f925-d002-486d-b0fc-5e9cfaeb1c6d ro quiet splash [ 0.000000] Local APIC disabled by BIOS -- you can enable it with "lapic" [ 0.000000] mapped APIC to ffffb000 (01805000) [ 0.000000] Enabling fast FPU save and restore... done. [ 0.000000] Enabling unmasked SIMD FPU exception support... done. [ 0.000000] Initializing CPU#0 [ 0.000000] PID hash table entries: 4096 (order: 12, 16384 bytes) [ 0.000000] Detected 1395.509 MHz processor. [ 8.175326] Console: colour VGA+ 80x25 [ 8.175331] console [tty0] enabled [ 8.175739] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes) [ 8.176257] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes) [ 8.208137] Memory: 1026536k/1047424k available (2079k kernel code, 20124k reserved, 977k data, 364k init, 129920k highmem) [ 8.208146] virtual kernel memory layout: [ 8.208148] fixmap : 0xfffa6000 - 0xfffff000 ( 356 kB) [ 8.208149] pkmap : 0xff800000 - 0xffc00000 (4096 kB) [ 8.208151] vmalloc : 0xf8800000 - 0xff7fe000 ( 111 MB) [ 8.208153] lowmem : 0xc0000000 - 0xf8000000 ( 896 MB) [ 8.208154] .init : 0xc0400000 - 0xc045b000 ( 364 kB) [ 8.208156] .data : 0xc0307ee4 - 0xc03fc3a4 ( 977 kB) [ 8.208157] .text : 0xc0100000 - 0xc0307ee4 (2079 kB) [ 8.208161] Checking if this processor honours the WP bit even in supervisor mode... Ok. [ 8.208204] SLUB: Genslabs=11, HWalign=64, Order=0-1, MinObjects=4, CPUs=1, Nodes=1 [ 8.288140] Calibrating delay using timer specific routine.. 2792.78 BogoMIPS (lpj=5585569) [ 8.288166] Security Framework initialized [ 8.288173] SELinux: Disabled at boot. [ 8.288187] AppArmor: AppArmor initialized [ 8.288191] Failure registering capabilities with primary security module. [ 8.288199] Mount-cache hash table entries: 512 [ 8.288308] Initializing cgroup subsys ns [ 8.288313] Initializing cgroup subsys cpuacct [ 8.288322] CPU: After generic identify, caps: afe9f9bf 00000000 00000000 00000000 00000180 00000000 00000000 00000000 [ 8.288334] CPU: L1 I cache: 32K, L1 D cache: 32K [ 8.288336] CPU: L2 cache: 2048K [ 8.288339] CPU: After all inits, caps: afe9f9bf 00000000 00000000 00042040 00000180 00000000 00000000 00000000 [ 8.288348] Compat vDSO mapped to ffffe000. [ 8.288359] CPU: Intel(R) Pentium(R) M processor 1.40GHz stepping 06 [ 8.288364] Checking 'hlt' instruction... OK. [ 8.305970] Freeing SMP alternatives: 0k freed [ 8.306091] Early unpacking initramfs... done [ 8.732179] ACPI: Core revision 20070126 [ 8.732262] ACPI: Looking for DSDT in initramfs... error, file /DSDT.aml not found. [ 8.734728] ACPI: setting ELCR to 0200 (from 0440) [ 8.751038] net_namespace: 64 bytes [ 8.751047] Booting paravirtualized kernel on bare hardware [ 8.751564] Time: 15:21:10 Date: 10/02/08 [ 8.751595] NET: Registered protocol family 16 [ 8.751797] EISA bus registered [ 8.751810] ACPI: bus type pci registered [ 8.753061] PCI: PCI BIOS revision 2.10 entry at 0xfd732, last bus=2 [ 8.753064] PCI: Using configuration type 1 [ 8.753071] Setting up standard PCI resources [ 8.771369] ACPI: EC: Look up EC in DSDT [ 8.774747] ACPI: Interpreter enabled [ 8.774750] ACPI: (supports S0 S3 S4 S5) [ 8.774762] ACPI: Using PIC for interrupt routing [ 8.775037] ACPI: EC: non-query interrupt received, switching to interrupt mode [ 8.796052] ACPI: EC: GPE = 0x1d, I/O: command/status = 0x66, data = 0x62 [ 8.796055] ACPI: EC: driver started in interrupt mode [ 8.796094] ACPI: PCI Root Bridge [PCI0] (0000:00) [ 8.796488] PCI quirk: region 1000-107f claimed by ICH4 ACPI/GPIO/TCO [ 8.796492] PCI quirk: region 1180-11bf claimed by ICH4 GPIO [ 8.797076] PCI: Transparent bridge - 0000:00:1e.0 [ 8.797213] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT] [ 8.797457] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.AGP_._PRT] [ 8.797476] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCIB._PRT] [ 8.800177] ACPI: PCI Interrupt Link [LNKA] (IRQs *6) [ 8.800283] ACPI: PCI Interrupt Link [LNKB] (IRQs *10) [ 8.800386] ACPI: PCI Interrupt Link [LNKC] (IRQs *6) [ 8.800488] ACPI: PCI Interrupt Link [LNKD] (IRQs *6) [ 8.800590] ACPI: PCI Interrupt Link [LNKE] (IRQs *10) [ 8.800692] ACPI: PCI Interrupt Link [LNKF] (IRQs 10) *0, disabled. [ 8.800794] ACPI: PCI Interrupt Link [LNKG] (IRQs 6) *0, disabled. [ 8.800896] ACPI: PCI Interrupt Link [LNKH] (IRQs *10) [ 8.801023] ACPI: Power Resource [PFN0] (off) [ 8.801064] ACPI: Power Resource [PFN1] (off) [ 8.801106] Linux Plug and Play Support v0.97 (c) Adam Belay [ 8.801139] pnp: PnP ACPI init [ 8.801147] ACPI: bus type pnp registered [ 8.807789] pnp: PnP ACPI: found 11 devices [ 8.807792] ACPI: ACPI bus type pnp unregistered [ 8.807796] PnPBIOS: Disabled by ACPI PNP [ 8.808011] PCI: Using ACPI for IRQ routing [ 8.808014] PCI: If a device doesn't work, try "pci=routeirq". If it helps, post a report [ 8.827587] NET: Registered protocol family 8 [ 8.827590] NET: Registered protocol family 20 [ 8.827647] AppArmor: AppArmor Filesystem Enabled [ 8.831576] Time: tsc clocksource has been installed. [ 8.839605] system 00:04: ioport range 0x600-0x60f has been reserved [ 8.839608] system 00:04: ioport range 0x700-0x70f has been reserved [ 8.839612] system 00:04: ioport range 0x800-0x80f has been reserved [ 8.839615] system 00:04: ioport range 0x1000-0x107f has been reserved [ 8.839618] system 00:04: ioport range 0x1180-0x11bf has been reserved [ 8.839622] system 00:04: ioport range 0x1c0-0x1cf has been reserved [ 8.839625] system 00:04: ioport range 0xfe00-0xfe00 has been reserved [ 8.839629] system 00:04: ioport range 0x4d0-0x4d1 has been reserved [ 8.839632] system 00:04: ioport range 0x610-0x61f has been reserved [ 8.839636] system 00:04: iomem range 0xfec10000-0xfec1ffff could not be reserved [ 8.839640] system 00:04: iomem range 0xff800000-0xffbfffff could not be reserved [ 8.839644] system 00:04: iomem range 0xfff00000-0xffffffff could not be reserved [ 8.839647] system 00:04: iomem range 0x0-0x9ffff could not be reserved [ 8.839651] system 00:04: iomem range 0xe0000-0xfffff could not be reserved [ 8.839654] system 00:04: iomem range 0xdf800-0xdffff has been reserved [ 8.839657] system 00:04: iomem range 0x0-0x0 could not be reserved [ 8.870050] PCI: Bridge: 0000:00:01.0 [ 8.870053] IO window: 3000-3fff [ 8.870057] MEM window: d0100000-d01fffff [ 8.870060] PREFETCH window: d8000000-dfffffff [ 8.870076] PCI: Bus 3, cardbus bridge: 0000:02:06.0 [ 8.870079] IO window: 00004000-000040ff [ 8.870083] IO window: 00004400-000044ff [ 8.870086] PREFETCH window: 54000000-57ffffff [ 8.870090] MEM window: 58000000-5bffffff [ 8.870094] PCI: Bus 7, cardbus bridge: 0000:02:06.1 [ 8.870097] IO window: 00004800-000048ff [ 8.870100] IO window: 00004c00-00004cff [ 8.870104] PREFETCH window: 5c000000-5fffffff [ 8.870108] MEM window: 60000000-63ffffff [ 8.870112] PCI: Bus 11, cardbus bridge: 0000:02:06.3 [ 8.870115] IO window: 00001400-000014ff [ 8.870118] IO window: 00002800-000028ff [ 8.870122] PREFETCH window: 64000000-67ffffff [ 8.870126] MEM window: 68000000-6bffffff [ 8.870130] PCI: Bridge: 0000:00:1e.0 [ 8.870133] IO window: 4000-4fff [ 8.870138] MEM window: d0200000-d07fffff [ 8.870141] PREFETCH window: disabled. [ 8.870155] PCI: Setting latency timer of device 0000:00:1e.0 to 64 [ 8.870333] ACPI: PCI Interrupt Link [LNKC] enabled at IRQ 6 [ 8.870336] PCI: setting IRQ 6 as level-triggered [ 8.870340] ACPI: PCI Interrupt 0000:02:06.0[A] -> Link [LNKC] -> GSI 6 (level, low) -> IRQ 6 [ 8.870355] ACPI: PCI Interrupt 0000:02:06.1[A] -> Link [LNKC] -> GSI 6 (level, low) -> IRQ 6 [ 8.870368] PCI: Enabling device 0000:02:06.3 (0080 -> 0083) [ 8.870371] ACPI: PCI Interrupt 0000:02:06.3[A] -> Link [LNKC] -> GSI 6 (level, low) -> IRQ 6 [ 8.870378] PCI: Setting latency timer of device 0000:02:06.3 to 64 [ 8.870389] NET: Registered protocol family 2 [ 8.907552] IP route cache hash table entries: 32768 (order: 5, 131072 bytes) [ 8.907795] TCP established hash table entries: 131072 (order: 8, 1048576 bytes) [ 8.908724] TCP bind hash table entries: 65536 (order: 6, 262144 bytes) [ 8.908995] TCP: Hash tables configured (established 131072 bind 65536) [ 8.908998] TCP reno registered [ 8.919637] checking if image is initramfs... it is [ 9.371033] Switched to high resolution mode on CPU 0 [ 9.767228] Freeing initrd memory: 7267k freed [ 9.767764] Simple Boot Flag at 0x37 set to 0x1 [ 9.768097] audit: initializing netlink socket (disabled) [ 9.768113] audit(1222960870.552:1): initialized [ 9.768277] highmem bounce pool size: 64 pages [ 9.770240] VFS: Disk quotas dquot_6.5.1 [ 9.770271] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes) [ 9.770418] io scheduler noop registered [ 9.770421] io scheduler anticipatory registered [ 9.770423] io scheduler deadline registered [ 9.770436] io scheduler cfq registered (default) [ 9.770530] Boot video device is 0000:01:00.0 [ 9.770836] isapnp: Scanning for PnP cards... [ 10.124149] isapnp: No Plug & Play device found [ 10.153578] Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing enabled [ 10.153696] serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A [ 10.153814] serial8250: ttyS1 at I/O 0x2f8 (irq = 3) is a NS16550A [ 10.154644] 00:09: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A [ 10.155024] ACPI: PCI Interrupt Link [LNKB] enabled at IRQ 10 [ 10.155028] PCI: setting IRQ 10 as level-triggered [ 10.155032] ACPI: PCI Interrupt 0000:00:1f.6[B] -> Link [LNKB] -> GSI 10 (level, low) -> IRQ 10 [ 10.155041] ACPI: PCI interrupt for device 0000:00:1f.6 disabled [ 10.155661] RAMDISK driver initialized: 16 RAM disks of 65536K size 1024 blocksize [ 10.155737] input: Macintosh mouse button emulation as /devices/virtual/input/input0 [ 10.155839] PNP: PS/2 Controller [PNP0303:KBC,PNP0f13:MOU2] at 0x60,0x64 irq 1,12 [ 10.157767] i8042.c: Detected active multiplexing controller, rev 1.1. [ 10.158736] serio: i8042 KBD port at 0x60,0x64 irq 1 [ 10.158741] serio: i8042 AUX0 port at 0x60,0x64 irq 12 [ 10.158744] serio: i8042 AUX1 port at 0x60,0x64 irq 12 [ 10.158747] serio: i8042 AUX2 port at 0x60,0x64 irq 12 [ 10.158750] serio: i8042 AUX3 port at 0x60,0x64 irq 12 [ 10.166146] mice: PS/2 mouse device common for all mice [ 10.166256] EISA: Probing bus 0 at eisa.0 [ 10.166263] Cannot allocate resource for EISA slot 1 [ 10.166266] Cannot allocate resource for EISA slot 2 [ 10.166269] Cannot allocate resource for EISA slot 3 [ 10.166272] Cannot allocate resource for EISA slot 4 [ 10.166289] EISA: Detected 0 cards. [ 10.166293] cpuidle: using governor ladder [ 10.166439] NET: Registered protocol family 1 [ 10.166468] Using IPI Shortcut mode [ 10.166499] registered taskstats version 1 [ 10.166612] Magic number: 12:586:385 [ 10.166705] BIOS EDD facility v0.16 2004-Jun-25, 0 devices found [ 10.166708] EDD information not available. [ 10.166925] Freeing unused kernel memory: 364k freed [ 10.206022] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input1 [ 11.413095] fuse init (API version 7.9) [ 11.429784] ACPI: Transitioning device [FAN0] to D3 [ 11.429787] ACPI: Transitioning device [FAN0] to D3 [ 11.429791] ACPI: Fan [FAN0] (off) [ 11.429905] ACPI: Transitioning device [FAN1] to D3 [ 11.429908] ACPI: Transitioning device [FAN1] to D3 [ 11.429911] ACPI: Fan [FAN1] (off) [ 11.435971] ACPI: CPU0 (power states: C1[C1] C2[C2] C3[C3]) [ 11.435977] ACPI: Processor [CPU0] (supports 8 throttling states) [ 11.440349] ACPI: Thermal Zone [THRM] (53 C) [ 12.239975] usbcore: registered new interface driver usbfs [ 12.240001] usbcore: registered new interface driver hub [ 12.259812] usbcore: registered new device driver usb [ 12.261098] USB Universal Host Controller Interface driver v3.0 [ 12.261376] ACPI: PCI Interrupt Link [LNKA] enabled at IRQ 6 [ 12.261380] ACPI: PCI Interrupt 0000:00:1d.0[A] -> Link [LNKA] -> GSI 6 (level, low) -> IRQ 6 [ 12.261393] PCI: Setting latency timer of device 0000:00:1d.0 to 64 [ 12.261397] uhci_hcd 0000:00:1d.0: UHCI Host Controller [ 12.261696] uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 1 [ 12.261721] uhci_hcd 0000:00:1d.0: irq 6, io base 0x00001800 [ 12.261869] usb usb1: configuration #1 chosen from 1 choice [ 12.261897] hub 1-0:1.0: USB hub found [ 12.261903] hub 1-0:1.0: 2 ports detected [ 12.352877] SCSI subsystem initialized [ 12.363911] ACPI: PCI Interrupt Link [LNKD] enabled at IRQ 6 [ 12.363916] ACPI: PCI Interrupt 0000:00:1d.1[B] -> Link [LNKD] -> GSI 6 (level, low) -> IRQ 6 [ 12.363928] PCI: Setting latency timer of device 0000:00:1d.1 to 64 [ 12.363932] uhci_hcd 0000:00:1d.1: UHCI Host Controller [ 12.363959] uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 2 [ 12.363982] uhci_hcd 0000:00:1d.1: irq 6, io base 0x00001820 [ 12.364105] usb usb2: configuration #1 chosen from 1 choice [ 12.364130] hub 2-0:1.0: USB hub found [ 12.364137] hub 2-0:1.0: 2 ports detected [ 12.431527] libata version 3.00 loaded. [ 12.467579] ACPI: PCI Interrupt 0000:00:1d.2[C] -> Link [LNKC] -> GSI 6 (level, low) -> IRQ 6 [ 12.467593] PCI: Setting latency timer of device 0000:00:1d.2 to 64 [ 12.467598] uhci_hcd 0000:00:1d.2: UHCI Host Controller [ 12.467623] uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 3 [ 12.467646] uhci_hcd 0000:00:1d.2: irq 6, io base 0x00001840 [ 12.467767] usb usb3: configuration #1 chosen from 1 choice [ 12.467793] hub 3-0:1.0: USB hub found [ 12.467800] hub 3-0:1.0: 2 ports detected [ 12.571774] ACPI: PCI Interrupt Link [LNKH] enabled at IRQ 10 [ 12.571780] ACPI: PCI Interrupt 0000:00:1d.7[D] -> Link [LNKH] -> GSI 10 (level, low) -> IRQ 10 [ 12.571794] PCI: Setting latency timer of device 0000:00:1d.7 to 64 [ 12.571799] ehci_hcd 0000:00:1d.7: EHCI Host Controller [ 12.571825] ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 4 [ 12.575735] ehci_hcd 0000:00:1d.7: debug port 1 [ 12.575741] PCI: cache line size of 32 is not supported by device 0000:00:1d.7 [ 12.575750] ehci_hcd 0000:00:1d.7: irq 10, io mem 0xd0000000 [ 12.591335] ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004 [ 12.591473] usb usb4: configuration #1 chosen from 1 choice [ 12.591500] hub 4-0:1.0: USB hub found [ 12.591507] hub 4-0:1.0: 6 ports detected [ 12.695392] tg3.c:v3.86 (November 9, 2007) [ 12.695421] ACPI: PCI Interrupt 0000:02:02.0[A] -> Link [LNKD] -> GSI 6 (level, low) -> IRQ 6 [ 12.808949] eth0: Tigon3 [partno(BCM95705A50) rev 3003 PHY(5705)] (PCI:33MHz:32-bit) 10/100/1000Base-T Ethernet 00:c0:9f:66:bf:ef [ 12.808958] eth0: RXcsums[1] LinkChgREG[0] MIirq[0] ASF[0] WireSpeed[0] TSOcap[1] [ 12.808961] eth0: dma_rwctrl[763f0000] dma_mask[64-bit] [ 12.808980] ata_piix 0000:00:1f.1: version 2.12 [ 12.808997] PCI: Enabling device 0000:00:1f.1 (0005 -> 0007) [ 12.809004] ACPI: PCI Interrupt 0000:00:1f.1[A] -> Link [LNKC] -> GSI 6 (level, low) -> IRQ 6 [ 12.809042] PCI: Setting latency timer of device 0000:00:1f.1 to 64 [ 12.809828] scsi0 : ata_piix [ 12.810375] scsi1 : ata_piix [ 12.811338] ata1: PATA max UDMA/100 cmd 0x1f0 ctl 0x3f6 bmdma 0x1860 irq 14 [ 12.811342] ata2: PATA max UDMA/100 cmd 0x170 ctl 0x376 bmdma 0x1868 irq 15 [ 12.975471] ata1.00: ATA-6: IC25N060ATMR04-0, MO3OAD5A, max UDMA/100 [ 12.975476] ata1.00: 117210240 sectors, multi 16: LBA48 [ 12.991325] ata1.00: configured for UDMA/100 [ 13.310845] ata2.00: ATAPI: HL-DT-ST DVD-RW GWA-4040N, 1.02, max UDMA/33 [ 13.322529] usb 4-6: new high speed USB device using ehci_hcd and address 3 [ 13.454797] usb 4-6: configuration #1 chosen from 1 choice [ 13.454976] hub 4-6:1.0: USB hub found [ 13.455066] hub 4-6:1.0: 4 ports detected [ 13.482666] ata2.00: configured for UDMA/33 [ 13.482792] scsi 0:0:0:0: Direct-Access ATA IC25N060ATMR04-0 MO3O PQ: 0 ANSI: 5 [ 13.483360] scsi 1:0:0:0: CD-ROM HL-DT-ST DVD-RW GWA-4040N 1.02 PQ: 0 ANSI: 5 [ 13.490807] ACPI: PCI Interrupt 0000:02:07.0[A] -> Link [LNKB] -> GSI 10 (level, low) -> IRQ 10 [ 13.540524] ohci1394: fw-host0: OHCI-1394 1.1 (PCI): IRQ=[10] MMIO=[d0218000-d02187ff] Max Packet=[2048] IR/IT contexts=[4/8] [ 13.550968] Driver 'sd' needs updating - please use bus_type methods [ 13.551045] sd 0:0:0:0: [sda] 117210240 512-byte hardware sectors (60012 MB) [ 13.551058] sd 0:0:0:0: [sda] Write Protect is off [ 13.551061] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00 [ 13.551078] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 13.551125] sd 0:0:0:0: [sda] 117210240 512-byte hardware sectors (60012 MB) [ 13.551135] sd 0:0:0:0: [sda] Write Protect is off [ 13.551138] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00 [ 13.551154] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 13.551158] sda:<4>Driver 'sr' needs updating - please use bus_type methods [ 13.581656] sda1 sda2 sda3 sda4 [ 13.598372] sd 0:0:0:0: [sda] Attached SCSI disk [ 13.603021] sd 0:0:0:0: Attached scsi generic sg0 type 0 [ 13.603041] sr 1:0:0:0: Attached scsi generic sg1 type 5 [ 13.606894] sr0: scsi3-mmc drive: 24x/24x writer cd/rw xa/form2 cdda tray [ 13.606898] Uniform CD-ROM driver Revision: 3.20 [ 13.606947] sr 1:0:0:0: Attached scsi CD-ROM sr0 [ 13.798001] usb 2-2: new low speed USB device using uhci_hcd and address 2 [ 13.971094] Attempting manual resume [ 13.971098] swsusp: Resume From Partition 8:3 [ 13.971100] PM: Checking swsusp image. [ 13.971235] PM: Resume from disk failed. [ 13.997077] usb 2-2: configuration #1 chosen from 1 choice [ 14.021843] usbcore: registered new interface driver hiddev [ 14.022305] kjournald starting. Commit interval 5 seconds [ 14.022317] EXT3-fs: mounted filesystem with ordered data mode. [ 14.060253] input: HID 04d9:0499 as /devices/pci0000:00/0000:00:1d.1/usb2/2-2/2-2:1.0/input/input2 [ 14.069716] input,hidraw0: USB HID v1.10 Mouse [HID 04d9:0499] on usb-0000:00:1d.1-2 [ 14.069731] usbcore: registered new interface driver usbhid [ 14.069735] /build/buildd/linux-2.6.24/drivers/hid/usbhid/hid-core.c: v2.6:USB HID core driver [ 14.812939] ieee1394: Host added: ID:BUS[0-00:1023] GUID[00c09f0000300f91] [ 24.815847] Real Time Clock Driver v1.12ac [ 25.731190] Synaptics Touchpad, model: 1, fw: 5.8, id: 0x9d48b1, caps: 0x904713/0x4006 [ 25.792594] input: SynPS/2 Synaptics TouchPad as /devices/platform/i8042/serio4/input/input3 [ 25.793559] ACPI: WMI-Acer: Mapper loaded [ 25.914926] acer_acpi: Acer Laptop ACPI Extras version 0.11.1 [ 25.914942] acer_acpi: No or unsupported WMI interface, unable to load. [ 25.943677] pci_hotplug: PCI Hot Plug PCI Core version: 0.5 [ 26.074328] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4 [ 26.100809] iTCO_vendor_support: vendor-support=0 [ 26.102022] iTCO_wdt: Intel TCO WatchDog Timer Driver v1.02 (26-Jul-2007) [ 26.102318] iTCO_wdt: Found a ICH4-M TCO device (Version=1, TCOBASE=0x1060) [ 26.102363] iTCO_wdt: initialized. heartbeat=30 sec (nowayout=0) [ 26.109639] parport_pc 00:08: reported by Plug and Play ACPI [ 26.109732] parport0: PC-style at 0x378 (0x778), irq 7, dma 3 [PCSPP,TRISTATE,COMPAT,EPP,ECP,DMA] [ 26.126432] input: PC Speaker as /devices/platform/pcspkr/input/input4 [ 26.130056] Linux agpgart interface v0.102 [ 26.157094] irda_init() [ 26.157106] NET: Registered protocol family 23 [ 26.257380] nsc_ircc_pnp_probe() : From PnP, found firbase 0x2F8 ; irq 3 ; dma 1. [ 26.257411] nsc-ircc, chip->init [ 26.257420] nsc-ircc, Found chip at base=0x04e [ 26.257443] nsc-ircc, driver loaded (Dag Brattli) [ 26.257449] nsc_ircc_open(), can't get iobase of 0x2f8 [ 26.257475] nsc-ircc, Found chip at base=0x04e [ 26.257498] nsc-ircc, driver loaded (Dag Brattli) [ 26.257501] nsc_ircc_open(), can't get iobase of 0x2f8 [ 26.257677] nsc-ircc 00:0a: disabled [ 26.331915] agpgart: Detected an Intel 855GM Chipset. [ 26.353393] agpgart: AGP aperture is 256M @ 0xe0000000 [ 26.353824] intel_rng: FWH not detected [ 26.887326] input: Power Button (FF) as /devices/virtual/input/input5 [ 26.915341] ACPI: Power Button (FF) [PWRF] [ 26.915440] input: Lid Switch as /devices/virtual/input/input6 [ 26.944419] ACPI: Lid Switch [LID] [ 26.944510] input: Sleep Button (CM) as /devices/virtual/input/input7 [ 26.975202] ACPI: Sleep Button (CM) [SLPB] [ 27.011244] ACPI: AC Adapter [ACAD] (on-line) [ 27.366818] ACPI: Battery Slot [BAT1] (battery present) [ 27.376762] ACPI: Battery Slot [BAT2] (battery absent) [ 28.009992] input: Video Bus as /devices/LNXSYSTM:00/device:00/PNP0A03:00/device:02/LNXVIDEO:00/input/input8 [ 28.038035] ACPI: Video Device [VGA] (multi-head: yes rom: no post: no) [ 28.562804] ACPI: PCI Interrupt 0000:00:1f.5[B] -> Link [LNKB] -> GSI 10 (level, low) -> IRQ 10 [ 28.562826] PCI: Setting latency timer of device 0000:00:1f.5 to 64 [ 28.885014] intel8x0_measure_ac97_clock: measured 55279 usecs [ 28.885019] intel8x0: clocking to 48000 [ 29.893625] ieee80211_crypt: registered algorithm 'NULL' [ 29.894063] Yenta: CardBus bridge found at 0000:02:06.0 [1025:0051] [ 29.894084] Yenta O2: res at 0x94/0xD4: ea/00 [ 29.894086] Yenta O2: enabling read prefetch/write burst [ 29.902010] ieee80211: 802.11 data/management/control stack, git-1.1.13 [ 29.902014] ieee80211: Copyright (C) 2004-2005 Intel Corporation <jketreno@xxxxxxxxxxxxxxx> [ 29.949868] ipw2100: Intel(R) PRO/Wireless 2100 Network Driver, git-1.2.2 [ 29.949873] ipw2100: Copyright(c) 2003-2006 Intel Corporation [ 30.020271] Yenta: ISA IRQ mask 0x0838, PCI irq 6 [ 30.020276] Socket status: 30000006 [ 30.020279] Yenta: Raising subordinate bus# of parent bus (#02) from #02 to #06 [ 30.020286] pcmcia: parent PCI bridge I/O window: 0x4000 - 0x4fff [ 30.020290] cs: IO port probe 0x4000-0x4fff: clean. [ 30.020603] pcmcia: parent PCI bridge Memory window: 0xd0200000 - 0xd07fffff [ 30.061716] Yenta: CardBus bridge found at 0000:02:06.1 [1025:0051] [ 30.188105] Yenta: ISA IRQ mask 0x0838, PCI irq 6 [ 30.188109] Socket status: 30000006 [ 30.188112] Yenta: Raising subordinate bus# of parent bus (#02) from #06 to #0a [ 30.188119] pcmcia: parent PCI bridge I/O window: 0x4000 - 0x4fff [ 30.188122] cs: IO port probe 0x4000-0x4fff: clean. [ 30.188435] pcmcia: parent PCI bridge Memory window: 0xd0200000 - 0xd07fffff [ 30.227947] Yenta: CardBus bridge found at 0000:02:06.3 [1025:0051] [ 30.355941] Yenta: ISA IRQ mask 0x0838, PCI irq 6 [ 30.355946] Socket status: 30000410 [ 30.355949] Yenta: Raising subordinate bus# of parent bus (#02) from #0a to #0e [ 30.355956] pcmcia: parent PCI bridge I/O window: 0x4000 - 0x4fff [ 30.355959] cs: IO port probe 0x4000-0x4fff: clean. [ 30.356272] pcmcia: parent PCI bridge Memory window: 0xd0200000 - 0xd07fffff [ 30.424497] ACPI: PCI Interrupt Link [LNKE] enabled at IRQ 10 [ 30.424502] ACPI: PCI Interrupt 0000:02:04.0[A] -> Link [LNKE] -> GSI 10 (level, low) -> IRQ 10 [ 30.424788] ipw2100: Detected Intel PRO/Wireless 2100 Network Connection [ 31.034602] pccard: PCMCIA card inserted into slot 2 [ 32.365312] eth1: Radio is disabled by RF switch. [ 32.948441] cs: memory probe 0xd0200000-0xd07fffff: excluding 0xd0200000-0xd025ffff [ 32.963227] pcmcia: registering new device pcmcia2.0 [ 33.024876] cs: IO port probe 0x100-0x3af: clean. [ 33.026442] cs: IO port probe 0x3e0-0x4ff: clean. [ 33.027118] cs: IO port probe 0x820-0x8ff: clean. [ 33.027697] cs: IO port probe 0xc00-0xcf7: clean. [ 33.028452] cs: IO port probe 0xa00-0xaff: clean. [ 33.029332] cs: IO port probe 0x100-0x3af: clean. [ 33.030895] cs: IO port probe 0x3e0-0x4ff: clean. [ 33.031571] cs: IO port probe 0x820-0x8ff: clean. [ 33.032151] cs: IO port probe 0xc00-0xcf7: clean. [ 33.032905] cs: IO port probe 0xa00-0xaff: clean. [ 33.034815] cs: IO port probe 0x100-0x3af: clean. [ 33.036411] cs: IO port probe 0x3e0-0x4ff: clean. [ 33.037087] cs: IO port probe 0x820-0x8ff: clean. [ 33.037666] cs: IO port probe 0xc00-0xcf7: clean. [ 33.038406] cs: IO port probe 0xa00-0xaff: clean. [ 33.598848] lp0: using parport0 (interrupt-driven). [ 33.683404] Adding 1951888k swap on /dev/sda3. Priority:-1 extents:1 across:1951888k [ 34.233207] EXT3 FS on sda1, internal journal [ 35.174944] kjournald starting. Commit interval 5 seconds [ 35.175182] EXT3 FS on sda4, internal journal [ 35.175186] EXT3-fs: mounted filesystem with ordered data mode. [ 35.813904] ip_tables: (C) 2000-2006 Netfilter Core Team [ 36.327132] No dock devices found. [ 36.328767] ACPI: \_SB_.PCI0.IDE0.SECN.BAY1: found ejectable bay [ 36.328772] ACPI: \_SB_.PCI0.IDE0.SECN.BAY1: Adding notify handler [ 36.328809] ACPI: Error installing bay notify handler [ 36.328812] ACPI: Bay [\_SB_.PCI0.IDE0.SECN.BAY1] Added [ 36.835283] ACPI: Invalid _PSS data: freq is zero [ 37.890938] ACPI: PCI Interrupt 0000:00:1f.6[B] -> Link [LNKB] -> GSI 10 (level, low) -> IRQ 10 [ 37.890958] PCI: Setting latency timer of device 0000:00:1f.6 to 64 [ 38.143116] ALSA /build/buildd/linux-ubuntu-modules-2.6.24-2.6.24/debian/build/build-386/sound/alsa-driver/pci/../alsa-kernel/pci/intel8x0m.c:846: Unable to initialize codec #0 [ 38.143428] ACPI: PCI interrupt for device 0000:00:1f.6 disabled [ 38.143576] Intel ICH Modem: probe of 0000:00:1f.6 failed with error -13 [ 48.637835] apm: BIOS not found. [ 48.922791] ppdev: user-space parallel port driver [ 49.330750] audit(1222960910.901:2): type=1503 operation="inode_permission" requested_mask="a::" denied_mask="a::" name="/dev/tty" pid=5051 profile="/usr/sbin/cupsd" namespace="default" [ 49.789400] NET: Registered protocol family 10 [ 49.789854] lo: Disabled Privacy Extensions [ 50.461059] ttyS1: LSR safety check engaged! [ 50.737498] ADDRCONF(NETDEV_UP): eth1: link is not ready [ 51.085213] ADDRCONF(NETDEV_UP): eth0: link is not ready [ 51.312225] Bluetooth: Core ver 2.11 [ 51.314222] NET: Registered protocol family 31 [ 51.314227] Bluetooth: HCI device and connection manager initialized [ 51.314230] Bluetooth: HCI socket layer initialized [ 51.352237] Bluetooth: L2CAP ver 2.9 [ 51.352242] Bluetooth: L2CAP socket layer initialized [ 51.438511] Bluetooth: RFCOMM socket layer initialized [ 51.438525] Bluetooth: RFCOMM TTY layer initialized [ 51.438527] Bluetooth: RFCOMM ver 1.8 [ 52.651747] tg3: eth0: Link is up at 100 Mbps, full duplex. [ 52.651752] tg3: eth0: Flow control is on for TX and on for RX. [ 52.652511] ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready [ 54.987783] NET: Registered protocol family 17 [ 66.267687] ALSA /build/buildd/linux-ubuntu-modules-2.6.24-2.6.24/debian/build/build-386/sound/alsa-driver/pci/intel8x0.c:564: codec_read 0: semaphore is not ready for register 0x2c [ 66.267699] ALSA /build/buildd/linux-ubuntu-modules-2.6.24-2.6.24/debian/build/build-386/sound/alsa-driver/pci/intel8x0.c:564: codec_read 0: semaphore is not ready for register 0x20 [ 68.220773] eth0: no IPv6 routers present [ 3094.053561] ALSA /build/buildd/linux-ubuntu-modules-2.6.24-2.6.24/debian/build/build-386/sound/alsa-driver/pci/intel8x0.c:550: codec_write 0: semaphore is not ready for register 0x32 [ 3094.053573] ALSA /build/buildd/linux-ubuntu-modules-2.6.24-2.6.24/debian/build/build-386/sound/alsa-driver/pci/intel8x0.c:564: codec_read 0: semaphore is not ready for register 0x32 [ 3258.050084] ttyS1: LSR safety check engaged! [ 3625.340395] ALSA /build/buildd/linux-ubuntu-modules-2.6.24-2.6.24/debian/build/build-386/sound/alsa-driver/pci/intel8x0.c:550: codec_write 0: semaphore is not ready for register 0x2 [ 3625.340416] ALSA /build/buildd/linux-ubuntu-modules-2.6.24-2.6.24/debian/build/build-386/sound/alsa-driver/pci/intel8x0.c:550: codec_write 0: semaphore is not ready for register 0x2 [ 3625.364305] ALSA /build/buildd/linux-ubuntu-modules-2.6.24-2.6.24/debian/build/build-386/sound/alsa-driver/pci/intel8x0.c:550: codec_write 0: semaphore is not ready for register 0x2 [ 3625.364324] ALSA /build/buildd/linux-ubuntu-modules-2.6.24-2.6.24/debian/build/build-386/sound/alsa-driver/pci/intel8x0.c:550: codec_write 0: semaphore is not ready for register 0x2 [ 3625.380254] ALSA /build/buildd/linux-ubuntu-modules-2.6.24-2.6.24/debian/build/build-386/sound/alsa-driver/pci/intel8x0.c:550: codec_write 0: semaphore is not ready for register 0x2 [ 3625.380272] ALSA /build/buildd/linux-ubuntu-modules-2.6.24-2.6.24/debian/build/build-386/sound/alsa-driver/pci/intel8x0.c:550: codec_write 0: semaphore is not ready for register 0x2 [ 3625.396234] ALSA /build/buildd/linux-ubuntu-modules-2.6.24-2.6.24/debian/build/build-386/sound/alsa-driver/pci/intel8x0.c:550: codec_write 0: semaphore is not ready for register 0x2 [ 3625.396252] ALSA /build/buildd/linux-ubuntu-modules-2.6.24-2.6.24/debian/build/build-386/sound/alsa-driver/pci/intel8x0.c:550: codec_write 0: semaphore is not ready for register 0x2 [ 3625.436187] ALSA /build/buildd/linux-ubuntu-modules-2.6.24-2.6.24/debian/build/build-386/sound/alsa-driver/pci/intel8x0.c:550: codec_write 0: semaphore is not ready for register 0x2 [ 3625.436205] ALSA /build/buildd/linux-ubuntu-modules-2.6.24-2.6.24/debian/build/build-386/sound/alsa-driver/pci/intel8x0.c:550: codec_write 0: semaphore is not ready for register 0x2 [ 3625.452172] ALSA /build/buildd/linux-ubuntu-modules-2.6.24-2.6.24/debian/build/build-386/sound/alsa-driver/pci/intel8x0.c:550: codec_write 0: semaphore is not ready for register 0x2 [ 3625.452190] ALSA /build/buildd/linux-ubuntu-modules-2.6.24-2.6.24/debian/build/build-386/sound/alsa-driver/pci/intel8x0.c:550: codec_write 0: semaphore is not ready for register 0x2 [ 3625.468146] ALSA /build/buildd/linux-ubuntu-modules-2.6.24-2.6.24/debian/build/build-386/sound/alsa-driver/pci/intel8x0.c:550: codec_write 0: semaphore is not ready for register 0x2 [ 3625.468501] ALSA /build/buildd/linux-ubuntu-modules-2.6.24-2.6.24/debian/build/build-386/sound/alsa-driver/pci/intel8x0.c:550: codec_write 0: semaphore is not ready for register 0x2 [ 3625.492104] ALSA /build/buildd/linux-ubuntu-modules-2.6.24-2.6.24/debian/build/build-386/sound/alsa-driver/pci/intel8x0.c:550: codec_write 0: semaphore is not ready for register 0x2 [ 3625.492457] ALSA /build/buildd/linux-ubuntu-modules-2.6.24-2.6.24/debian/build/build-386/sound/alsa-driver/pci/intel8x0.c:550: codec_write 0: semaphore is not ready for register 0x2 [ 3625.516064] ALSA /build/buildd/linux-ubuntu-modules-2.6.24-2.6.24/debian/build/build-386/sound/alsa-driver/pci/intel8x0.c:550: codec_write 0: semaphore is not ready for register 0x2 [ 3625.516440] ALSA /build/buildd/linux-ubuntu-modules-2.6.24-2.6.24/debian/build/build-386/sound/alsa-driver/pci/intel8x0.c:550: codec_write 0: semaphore is not ready for register 0x2 [ 3625.659924] ALSA /build/buildd/linux-ubuntu-modules-2.6.24-2.6.24/debian/build/build-386/sound/alsa-driver/pci/intel8x0.c:550: codec_write 0: semaphore is not ready for register 0x2 [ 3625.660304] ALSA /build/buildd/linux-ubuntu-modules-2.6.24-2.6.24/debian/build/build-386/sound/alsa-driver/pci/intel8x0.c:550: codec_write 0: semaphore is not ready for register 0x2 [ 3625.691870] ALSA /build/buildd/linux-ubuntu-modules-2.6.24-2.6.24/debian/build/build-386/sound/alsa-driver/pci/intel8x0.c:550: codec_write 0: semaphore is not ready for register 0x2 [ 3625.692234] ALSA /build/buildd/linux-ubuntu-modules-2.6.24-2.6.24/debian/build/build-386/sound/alsa-driver/pci/intel8x0.c:550: codec_write 0: semaphore is not ready for register 0x2 [ 3625.715825] ALSA /build/buildd/linux-ubuntu-modules-2.6.24-2.6.24/debian/build/build-386/sound/alsa-driver/pci/intel8x0.c:550: codec_write 0: semaphore is not ready for register 0x2 [ 3625.716178] ALSA /build/buildd/linux-ubuntu-modules-2.6.24-2.6.24/debian/build/build-386/sound/alsa-driver/pci/intel8x0.c:550: codec_write 0: semaphore is not ready for register 0x2 [ 3627.066204] ALSA /build/buildd/linux-ubuntu-modules-2.6.24-2.6.24/debian/build/build-386/sound/alsa-driver/pci/intel8x0.c:550: codec_write 0: semaphore is not ready for register 0x2 [ 3627.066645] ALSA /build/buildd/linux-ubuntu-modules-2.6.24-2.6.24/debian/build/build-386/sound/alsa-driver/pci/intel8x0.c:550: codec_write 0: semaphore is not ready for register 0x2 [ 3627.074142] ALSA /build/buildd/linux-ubuntu-modules-2.6.24-2.6.24/debian/build/build-386/sound/alsa-driver/pci/intel8x0.c:550: codec_write 0: semaphore is not ready for register 0x2 [ 3627.074545] ALSA /build/buildd/linux-ubuntu-modules-2.6.24-2.6.24/debian/build/build-386/sound/alsa-driver/pci/intel8x0.c:550: codec_write 0: semaphore is not ready for register 0x2 [ 3627.090104] ALSA /build/buildd/linux-ubuntu-modules-2.6.24-2.6.24/debian/build/build-386/sound/alsa-driver/pci/intel8x0.c:550: codec_write 0: semaphore is not ready for register 0x2 [ 3627.090475] ALSA /build/buildd/linux-ubuntu-modules-2.6.24-2.6.24/debian/build/build-386/sound/alsa-driver/pci/intel8x0.c:550: codec_write 0: semaphore is not ready for register 0x2 [ 3627.106086] ALSA /build/buildd/linux-ubuntu-modules-2.6.24-2.6.24/debian/build/build-386/sound/alsa-driver/pci/intel8x0.c:550: codec_write 0: semaphore is not ready for register 0x2 [ 3627.106455] ALSA /build/buildd/linux-ubuntu-modules-2.6.24-2.6.24/debian/build/build-386/sound/alsa-driver/pci/intel8x0.c:550: codec_write 0: semaphore is not ready for register 0x2 [ 3627.122043] ALSA /build/buildd/linux-ubuntu-modules-2.6.24-2.6.24/debian/build/build-386/sound/alsa-driver/pci/intel8x0.c:550: codec_write 0: semaphore is not ready for register 0x2 [ 3627.122415] ALSA /build/buildd/linux-ubuntu-modules-2.6.24-2.6.24/debian/build/build-386/sound/alsa-driver/pci/intel8x0.c:550: codec_write 0: semaphore is not ready for register 0x2 [ 3627.138044] ALSA /build/buildd/linux-ubuntu-modules-2.6.24-2.6.24/debian/build/build-386/sound/alsa-driver/pci/intel8x0.c:550: codec_write 0: semaphore is not ready for register 0x2 [ 3627.138412] ALSA /build/buildd/linux-ubuntu-modules-2.6.24-2.6.24/debian/build/build-386/sound/alsa-driver/pci/intel8x0.c:550: codec_write 0: semaphore is not ready for register 0x2 [ 3627.154044] ALSA /build/buildd/linux-ubuntu-modules-2.6.24-2.6.24/debian/build/build-386/sound/alsa-driver/pci/intel8x0.c:550: codec_write 0: semaphore is not ready for register 0x2 [ 3627.154420] ALSA /build/buildd/linux-ubuntu-modules-2.6.24-2.6.24/debian/build/build-386/sound/alsa-driver/pci/intel8x0.c:550: codec_write 0: semaphore is not ready for register 0x2 [ 3627.178004] ALSA /build/buildd/linux-ubuntu-modules-2.6.24-2.6.24/debian/build/build-386/sound/alsa-driver/pci/intel8x0.c:550: codec_write 0: semaphore is not ready for register 0x2 [ 3627.178364] ALSA /build/buildd/linux-ubuntu-modules-2.6.24-2.6.24/debian/build/build-386/sound/alsa-driver/pci/intel8x0.c:550: codec_write 0: semaphore is not ready for register 0x2 [ 3627.209954] ALSA /build/buildd/linux-ubuntu-modules-2.6.24-2.6.24/debian/build/build-386/sound/alsa-driver/pci/intel8x0.c:550: codec_write 0: semaphore is not ready for register 0x2 [ 3627.210329] ALSA /build/buildd/linux-ubuntu-modules-2.6.24-2.6.24/debian/build/build-386/sound/alsa-driver/pci/intel8x0.c:550: codec_write 0: semaphore is not ready for register 0x2 [ 3627.225936] ALSA /build/buildd/linux-ubuntu-modules-2.6.24-2.6.24/debian/build/build-386/sound/alsa-driver/pci/intel8x0.c:550: codec_write 0: semaphore is not ready for register 0x2 [ 3627.226300] ALSA /build/buildd/linux-ubuntu-modules-2.6.24-2.6.24/debian/build/build-386/sound/alsa-driver/pci/intel8x0.c:550: codec_write 0: semaphore is not ready for register 0x2 [ 3627.249922] ALSA /build/buildd/linux-ubuntu-modules-2.6.24-2.6.24/debian/build/build-386/sound/alsa-driver/pci/intel8x0.c:550: codec_write 0: semaphore is not ready for register 0x2 [ 3627.250292] ALSA /build/buildd/linux-ubuntu-modules-2.6.24-2.6.24/debian/build/build-386/sound/alsa-driver/pci/intel8x0.c:550: codec_write 0: semaphore is not ready for register 0x2 [ 3627.265887] ALSA /build/buildd/linux-ubuntu-modules-2.6.24-2.6.24/debian/build/build-386/sound/alsa-driver/pci/intel8x0.c:550: codec_write 0: semaphore is not ready for register 0x2 [ 3627.266253] ALSA /build/buildd/linux-ubuntu-modules-2.6.24-2.6.24/debian/build/build-386/sound/alsa-driver/pci/intel8x0.c:550: codec_write 0: semaphore is not ready for register 0x2 [ 3627.281867] ALSA /build/buildd/linux-ubuntu-modules-2.6.24-2.6.24/debian/build/build-386/sound/alsa-driver/pci/intel8x0.c:550: codec_write 0: semaphore is not ready for register 0x2 [ 3627.282228] ALSA /build/buildd/linux-ubuntu-modules-2.6.24-2.6.24/debian/build/build-386/sound/alsa-driver/pci/intel8x0.c:550: codec_write 0: semaphore is not ready for register 0x2 [ 3627.297848] ALSA /build/buildd/linux-ubuntu-modules-2.6.24-2.6.24/debian/build/build-386/sound/alsa-driver/pci/intel8x0.c:550: codec_write 0: semaphore is not ready for register 0x2 [ 3627.298214] ALSA /build/buildd/linux-ubuntu-modules-2.6.24-2.6.24/debian/build/build-386/sound/alsa-driver/pci/intel8x0.c:550: codec_write 0: semaphore is not ready for register 0x2 [ 3627.305838] ALSA /build/buildd/linux-ubuntu-modules-2.6.24-2.6.24/debian/build/build-386/sound/alsa-driver/pci/intel8x0.c:550: codec_write 0: semaphore is not ready for register 0x2 [ 3627.306199] ALSA /build/buildd/linux-ubuntu-modules-2.6.24-2.6.24/debian/build/build-386/sound/alsa-driver/pci/intel8x0.c:550: codec_write 0: semaphore is not ready for register 0x2 [ 3627.329806] ALSA /build/buildd/linux-ubuntu-modules-2.6.24-2.6.24/debian/build/build-386/sound/alsa-driver/pci/intel8x0.c:550: codec_write 0: semaphore is not ready for register 0x2 [ 3627.330191] ALSA /build/buildd/linux-ubuntu-modules-2.6.24-2.6.24/debian/build/build-386/sound/alsa-driver/pci/intel8x0.c:550: codec_write 0: semaphore is not ready for register 0x2 [ 3627.377763] ALSA /build/buildd/linux-ubuntu-modules-2.6.24-2.6.24/debian/build/build-386/sound/alsa-driver/pci/intel8x0.c:550: codec_write 0: semaphore is not ready for register 0x2 [ 3627.378133] ALSA /build/buildd/linux-ubuntu-modules-2.6.24-2.6.24/debian/build/build-386/sound/alsa-driver/pci/intel8x0.c:550: codec_write 0: semaphore is not ready for register 0x2 [ 3627.785287] ALSA /build/buildd/linux-ubuntu-modules-2.6.24-2.6.24/debian/build/build-386/sound/alsa-driver/pci/intel8x0.c:550: codec_write 0: semaphore is not ready for register 0x2 [ 3627.785684] ALSA /build/buildd/linux-ubuntu-modules-2.6.24-2.6.24/debian/build/build-386/sound/alsa-driver/pci/intel8x0.c:550: codec_write 0: semaphore is not ready for register 0x2 [ 3627.809212] ALSA /build/buildd/linux-ubuntu-modules-2.6.24-2.6.24/debian/build/build-386/sound/alsa-driver/pci/intel8x0.c:550: codec_write 0: semaphore is not ready for register 0x2 [ 3627.809581] ALSA /build/buildd/linux-ubuntu-modules-2.6.24-2.6.24/debian/build/build-386/sound/alsa-driver/pci/intel8x0.c:550: codec_write 0: semaphore is not ready for register 0x2 [ 3627.825186] ALSA /build/buildd/linux-ubuntu-modules-2.6.24-2.6.24/debian/build/build-386/sound/alsa-driver/pci/intel8x0.c:550: codec_write 0: semaphore is not ready for register 0x2 [ 3627.825549] ALSA /build/buildd/linux-ubuntu-modules-2.6.24-2.6.24/debian/build/build-386/sound/alsa-driver/pci/intel8x0.c:550: codec_write 0: semaphore is not ready for register 0x2 [ 3627.841145] ALSA /build/buildd/linux-ubuntu-modules-2.6.24-2.6.24/debian/build/build-386/sound/alsa-driver/pci/intel8x0.c:550: codec_write 0: semaphore is not ready for register 0x2 [ 3627.841530] ALSA /build/buildd/linux-ubuntu-modules-2.6.24-2.6.24/debian/build/build-386/sound/alsa-driver/pci/intel8x0.c:550: codec_write 0: semaphore is not ready for register 0x2 [ 3627.857160] ALSA /build/buildd/linux-ubuntu-modules-2.6.24-2.6.24/debian/build/build-386/sound/alsa-driver/pci/intel8x0.c:550: codec_write 0: semaphore is not ready for register 0x2 [ 3627.857532] ALSA /build/buildd/linux-ubuntu-modules-2.6.24-2.6.24/debian/build/build-386/sound/alsa-driver/pci/intel8x0.c:550: codec_write 0: semaphore is not ready for register 0x2 [ 3627.873120] ALSA /build/buildd/linux-ubuntu-modules-2.6.24-2.6.24/debian/build/build-386/sound/alsa-driver/pci/intel8x0.c:550: codec_write 0: semaphore is not ready for register 0x2 [ 3627.873482] ALSA /build/buildd/linux-ubuntu-modules-2.6.24-2.6.24/debian/build/build-386/sound/alsa-driver/pci/intel8x0.c:550: codec_write 0: semaphore is not ready for register 0x2 [ 3627.889102] ALSA /build/buildd/linux-ubuntu-modules-2.6.24-2.6.24/debian/build/build-386/sound/alsa-driver/pci/intel8x0.c:550: codec_write 0: semaphore is not ready for register 0x2 [ 3627.889466] ALSA /build/buildd/linux-ubuntu-modules-2.6.24-2.6.24/debian/build/build-386/sound/alsa-driver/pci/intel8x0.c:550: codec_write 0: semaphore is not ready for register 0x2 [ 3627.897086] ALSA /build/buildd/linux-ubuntu-modules-2.6.24-2.6.24/debian/build/build-386/sound/alsa-driver/pci/intel8x0.c:550: codec_write 0: semaphore is not ready for register 0x2 [ 3627.897444] ALSA /build/buildd/linux-ubuntu-modules-2.6.24-2.6.24/debian/build/build-386/sound/alsa-driver/pci/intel8x0.c:550: codec_write 0: semaphore is not ready for register 0x2 [ 3627.913073] ALSA /build/buildd/linux-ubuntu-modules-2.6.24-2.6.24/debian/build/build-386/sound/alsa-driver/pci/intel8x0.c:550: codec_write 0: semaphore is not ready for register 0x2 [ 3627.913432] ALSA /build/buildd/linux-ubuntu-modules-2.6.24-2.6.24/debian/build/build-386/sound/alsa-driver/pci/intel8x0.c:550: codec_write 0: semaphore is not ready for register 0x2 [ 3627.953029] ALSA /build/buildd/linux-ubuntu-modules-2.6.24-2.6.24/debian/build/build-386/sound/alsa-driver/pci/intel8x0.c:550: codec_write 0: semaphore is not ready for register 0x2 [ 3627.953405] ALSA /build/buildd/linux-ubuntu-modules-2.6.24-2.6.24/debian/build/build-386/sound/alsa-driver/pci/intel8x0.c:550: codec_write 0: semaphore is not ready for register 0x2 [ 3627.961009] ALSA /build/buildd/linux-ubuntu-modules-2.6.24-2.6.24/debian/build/build-386/sound/alsa-driver/pci/intel8x0.c:550: codec_write 0: semaphore is not ready for register 0x2 [ 3627.961372] ALSA /build/buildd/linux-ubuntu-modules-2.6.24-2.6.24/debian/build/build-386/sound/alsa-driver/pci/intel8x0.c:550: codec_write 0: semaphore is not ready for register 0x2 [ 3627.984988] ALSA /build/buildd/linux-ubuntu-modules-2.6.24-2.6.24/debian/build/build-386/sound/alsa-driver/pci/intel8x0.c:550: codec_write 0: semaphore is not ready for register 0x2 [ 3627.985357] ALSA /build/buildd/linux-ubuntu-modules-2.6.24-2.6.24/debian/build/build-386/sound/alsa-driver/pci/intel8x0.c:550: codec_write 0: semaphore is not ready for register 0x2 [ 3628.000961] ALSA /build/buildd/linux-ubuntu-modules-2.6.24-2.6.24/debian/build/build-386/sound/alsa-driver/pci/intel8x0.c:550: codec_write 0: semaphore is not ready for register 0x2 [ 3628.001346] ALSA /build/buildd/linux-ubuntu-modules-2.6.24-2.6.24/debian/build/build-386/sound/alsa-driver/pci/intel8x0.c:550: codec_write 0: semaphore is not ready for register 0x2 [ 3628.008951] ALSA /build/buildd/linux-ubuntu-modules-2.6.24-2.6.24/debian/build/build-386/sound/alsa-driver/pci/intel8x0.c:550: codec_write 0: semaphore is not ready for register 0x2 [ 3628.009308] ALSA /build/buildd/linux-ubuntu-modules-2.6.24-2.6.24/debian/build/build-386/sound/alsa-driver/pci/intel8x0.c:550: codec_write 0: semaphore is not ready for register 0x2 [ 3628.032913] ALSA /build/buildd/linux-ubuntu-modules-2.6.24-2.6.24/debian/build/build-386/sound/alsa-driver/pci/intel8x0.c:550: codec_write 0: semaphore is not ready for register 0x2 [ 3628.033270] ALSA /build/buildd/linux-ubuntu-modules-2.6.24-2.6.24/debian/build/build-386/sound/alsa-driver/pci/intel8x0.c:550: codec_write 0: semaphore is not ready for register 0x2 [ 3628.056900] ALSA /build/buildd/linux-ubuntu-modules-2.6.24-2.6.24/debian/build/build-386/sound/alsa-driver/pci/intel8x0.c:550: codec_write 0: semaphore is not ready for register 0x2 [ 3628.057267] ALSA /build/buildd/linux-ubuntu-modules-2.6.24-2.6.24/debian/build/build-386/sound/alsa-driver/pci/intel8x0.c:550: codec_write 0: semaphore is not ready for register 0x2 [ 3628.088849] ALSA /build/buildd/linux-ubuntu-modules-2.6.24-2.6.24/debian/build/build-386/sound/alsa-driver/pci/intel8x0.c:550: codec_write 0: semaphore is not ready for register 0x2 [ 3628.089211] ALSA /build/buildd/linux-ubuntu-modules-2.6.24-2.6.24/debian/build/build-386/sound/alsa-driver/pci/intel8x0.c:550: codec_write 0: semaphore is not ready for register 0x2 [ 3655.927499] ALSA /build/buildd/linux-ubuntu-modules-2.6.24-2.6.24/debian/build/build-386/sound/alsa-driver/pci/intel8x0.c:550: codec_write 0: semaphore is not ready for register 0x2 [ 3655.928812] ALSA /build/buildd/linux-ubuntu-modules-2.6.24-2.6.24/debian/build/build-386/sound/alsa-driver/pci/intel8x0.c:550: codec_write 0: semaphore is not ready for register 0x2 [ 3656.182919] ALSA /build/buildd/linux-ubuntu-modules-2.6.24-2.6.24/debian/build/build-386/sound/alsa-driver/pci/intel8x0.c:550: codec_write 0: semaphore is not ready for register 0x2 [ 3656.184316] ALSA /build/buildd/linux-ubuntu-modules-2.6.24-2.6.24/debian/build/build-386/sound/alsa-driver/pci/intel8x0.c:550: codec_write 0: semaphore is not ready for register 0x2 [ 3656.185112] ALSA /build/buildd/linux-ubuntu-modules-2.6.24-2.6.24/debian/build/build-386/sound/alsa-driver/pci/intel8x0.c:550: codec_write 0: semaphore is not ready for register 0x2 [ 3668.645814] ALSA /build/buildd/linux-ubuntu-modules-2.6.24-2.6.24/debian/build/build-386/sound/alsa-driver/pci/intel8x0.c:550: codec_write 0: semaphore is not ready for register 0x2 [ 3668.645836] ALSA /build/buildd/linux-ubuntu-modules-2.6.24-2.6.24/debian/build/build-386/sound/alsa-driver/pci/intel8x0.c:550: codec_write 0: semaphore is not ready for register 0x2 [ 3668.653733] ALSA /build/buildd/linux-ubuntu-modules-2.6.24-2.6.24/debian/build/build-386/sound/alsa-driver/pci/intel8x0.c:550: codec_write 0: semaphore is not ready for register 0x2 [ 3668.654524] ALSA /build/buildd/linux-ubuntu-modules-2.6.24-2.6.24/debian/build/build-386/sound/alsa-driver/pci/intel8x0.c:550: codec_write 0: semaphore is not ready for register 0x2 [ 3668.669704] ALSA /build/buildd/linux-ubuntu-modules-2.6.24-2.6.24/debian/build/build-386/sound/alsa-driver/pci/intel8x0.c:550: codec_write 0: semaphore is not ready for register 0x2 [ 3668.670210] ALSA /build/buildd/linux-ubuntu-modules-2.6.24-2.6.24/debian/build/build-386/sound/alsa-driver/pci/intel8x0.c:550: codec_write 0: semaphore is not ready for register 0x2 [ 3668.677684] ALSA /build/buildd/linux-ubuntu-modules-2.6.24-2.6.24/debian/build/build-386/sound/alsa-driver/pci/intel8x0.c:550: codec_write 0: semaphore is not ready for register 0x2 [ 3668.678432] ALSA /build/buildd/linux-ubuntu-modules-2.6.24-2.6.24/debian/build/build-386/sound/alsa-driver/pci/intel8x0.c:550: codec_write 0: semaphore is not ready for register 0x2 [ 3668.693652] ALSA /build/buildd/linux-ubuntu-modules-2.6.24-2.6.24/debian/build/build-386/sound/alsa-driver/pci/intel8x0.c:550: codec_write 0: semaphore is not ready for register 0x2 [ 3668.694397] ALSA /build/buildd/linux-ubuntu-modules-2.6.24-2.6.24/debian/build/build-386/sound/alsa-driver/pci/intel8x0.c:550: codec_write 0: semaphore is not ready for register 0x2 [ 3668.709611] ALSA /build/buildd/linux-ubuntu-modules-2.6.24-2.6.24/debian/build/build-386/sound/alsa-driver/pci/intel8x0.c:550: codec_write 0: semaphore is not ready for register 0x2 [ 3668.710355] ALSA /build/buildd/linux-ubuntu-modules-2.6.24-2.6.24/debian/build/build-386/sound/alsa-driver/pci/intel8x0.c:550: codec_write 0: semaphore is not ready for register 0x2 [ 3668.717636] ALSA /build/buildd/linux-ubuntu-modules-2.6.24-2.6.24/debian/build/build-386/sound/alsa-driver/pci/intel8x0.c:550: codec_write 0: semaphore is not ready for register 0x2 [ 3668.718380] ALSA /build/buildd/linux-ubuntu-modules-2.6.24-2.6.24/debian/build/build-386/sound/alsa-driver/pci/intel8x0.c:550: codec_write 0: semaphore is not ready for register 0x2 [ 3669.061194] ALSA /build/buildd/linux-ubuntu-modules-2.6.24-2.6.24/debian/build/build-386/sound/alsa-driver/pci/intel8x0.c:550: codec_write 0: semaphore is not ready for register 0x2 [ 3669.061690] ALSA /build/buildd/linux-ubuntu-modules-2.6.24-2.6.24/debian/build/build-386/sound/alsa-driver/pci/intel8x0.c:550: codec_write 0: semaphore is not ready for register 0x2 [ 3669.077175] ALSA /build/buildd/linux-ubuntu-modules-2.6.24-2.6.24/debian/build/build-386/sound/alsa-driver/pci/intel8x0.c:550: codec_write 0: semaphore is not ready for register 0x2 [ 3669.077942] ALSA /build/buildd/linux-ubuntu-modules-2.6.24-2.6.24/debian/build/build-386/sound/alsa-driver/pci/intel8x0.c:550: codec_write 0: semaphore is not ready for register 0x2 [ 3669.093155] ALSA /build/buildd/linux-ubuntu-modules-2.6.24-2.6.24/debian/build/build-386/sound/alsa-driver/pci/intel8x0.c:550: codec_write 0: semaphore is not ready for register 0x2 [ 3669.093909] ALSA /build/buildd/linux-ubuntu-modules-2.6.24-2.6.24/debian/build/build-386/sound/alsa-driver/pci/intel8x0.c:550: codec_write 0: semaphore is not ready for register 0x2 [ 3669.117117] ALSA /build/buildd/linux-ubuntu-modules-2.6.24-2.6.24/debian/build/build-386/sound/alsa-driver/pci/intel8x0.c:550: codec_write 0: semaphore is not ready for register 0x2 [ 3669.117862] ALSA /build/buildd/linux-ubuntu-modules-2.6.24-2.6.24/debian/build/build-386/sound/alsa-driver/pci/intel8x0.c:550: codec_write 0: semaphore is not ready for register 0x2 [ 3669.141096] ALSA /build/buildd/linux-ubuntu-modules-2.6.24-2.6.24/debian/build/build-386/sound/alsa-driver/pci/intel8x0.c:550: codec_write 0: semaphore is not ready for register 0x2 [ 3669.141855] ALSA /build/buildd/linux-ubuntu-modules-2.6.24-2.6.24/debian/build/build-386/sound/alsa-driver/pci/intel8x0.c:550: codec_write 0: semaphore is not ready for register 0x2 [ 3669.181056] ALSA /build/buildd/linux-ubuntu-modules-2.6.24-2.6.24/debian/build/build-386/sound/alsa-driver/pci/intel8x0.c:550: codec_write 0: semaphore is not ready for register 0x2 [ 3669.181533] ALSA /build/buildd/linux-ubuntu-modules-2.6.24-2.6.24/debian/build/build-386/sound/alsa-driver/pci/intel8x0.c:550: codec_write 0: semaphore is not ready for register 0x2 [ 3669.244969] ALSA /build/buildd/linux-ubuntu-modules-2.6.24-2.6.24/debian/build/build-386/sound/alsa-driver/pci/intel8x0.c:550: codec_write 0: semaphore is not ready for register 0x2 [ 3669.245724] ALSA /build/buildd/linux-ubuntu-modules-2.6.24-2.6.24/debian/build/build-386/sound/alsa-driver/pci/intel8x0.c:550: codec_write 0: semaphore is not ready for register 0x2 [ 3669.268936] ALSA /build/buildd/linux-ubuntu-modules-2.6.24-2.6.24/debian/build/build-386/sound/alsa-driver/pci/intel8x0.c:550: codec_write 0: semaphore is not ready for register 0x2 [ 3669.269712] ALSA /build/buildd/linux-ubuntu-modules-2.6.24-2.6.24/debian/build/build-386/sound/alsa-driver/pci/intel8x0.c:550: codec_write 0: semaphore is not ready for register 0x2 [ 3669.308893] ALSA /build/buildd/linux-ubuntu-modules-2.6.24-2.6.24/debian/build/build-386/sound/alsa-driver/pci/intel8x0.c:550: codec_write 0: semaphore is not ready for register 0x2 [ 3669.309648] ALSA /build/buildd/linux-ubuntu-modules-2.6.24-2.6.24/debian/build/build-386/sound/alsa-driver/pci/intel8x0.c:550: codec_write 0: semaphore is not ready for register 0x2 [ 3672.121345] ALSA /build/buildd/linux-ubuntu-modules-2.6.24-2.6.24/debian/build/build-386/sound/alsa-driver/pci/intel8x0.c:550: codec_write 0: semaphore is not ready for register 0x2 [ 3672.121368] ALSA /build/buildd/linux-ubuntu-modules-2.6.24-2.6.24/debian/build/build-386/sound/alsa-driver/pci/intel8x0.c:550: codec_write 0: semaphore is not ready for register 0x2 [ 3672.217238] ALSA /build/buildd/linux-ubuntu-modules-2.6.24-2.6.24/debian/build/build-386/sound/alsa-driver/pci/intel8x0.c:550: codec_write 0: semaphore is not ready for register 0x2 [ 3672.217258] ALSA /build/buildd/linux-ubuntu-modules-2.6.24-2.6.24/debian/build/build-386/sound/alsa-driver/pci/intel8x0.c:550: codec_write 0: semaphore is not ready for register 0x2 [ 3672.289156] ALSA /build/buildd/linux-ubuntu-modules-2.6.24-2.6.24/debian/build/build-386/sound/alsa-driver/pci/intel8x0.c:550: codec_write 0: semaphore is not ready for register 0x2 [ 3672.289176] ALSA /build/buildd/linux-ubuntu-modules-2.6.24-2.6.24/debian/build/build-386/sound/alsa-driver/pci/intel8x0.c:550: codec_write 0: semaphore is not ready for register 0x2 [ 3672.387503] ALSA /build/buildd/linux-ubuntu-modules-2.6.24-2.6.24/debian/build/build-386/sound/alsa-driver/pci/intel8x0.c:550: codec_write 0: semaphore is not ready for register 0x2 [ 3672.387522] ALSA /build/buildd/linux-ubuntu-modules-2.6.24-2.6.24/debian/build/build-386/sound/alsa-driver/pci/intel8x0.c:550: codec_write 0: semaphore is not ready for register 0x2 [ 3672.424961] ALSA /build/buildd/linux-ubuntu-modules-2.6.24-2.6.24/debian/build/build-386/sound/alsa-driver/pci/intel8x0.c:550: codec_write 0: semaphore is not ready for register 0x2 [ 3672.424980] ALSA /build/buildd/linux-ubuntu-modules-2.6.24-2.6.24/debian/build/build-386/sound/alsa-driver/pci/intel8x0.c:550: codec_write 0: semaphore is not ready for register 0x2 [ 3672.480889] ALSA /build/buildd/linux-ubuntu-modules-2.6.24-2.6.24/debian/build/build-386/sound/alsa-driver/pci/intel8x0.c:550: codec_write 0: semaphore is not ready for register 0x2 [ 3672.481814] ALSA /build/buildd/linux-ubuntu-modules-2.6.24-2.6.24/debian/build/build-386/sound/alsa-driver/pci/intel8x0.c:550: codec_write 0: semaphore is not ready for register 0x2 [ 8792.214981] ALSA /build/buildd/linux-ubuntu-modules-2.6.24-2.6.24/debian/build/build-386/sound/alsa-driver/pci/intel8x0.c:550: codec_write 0: semaphore is not ready for register 0x2 Module Size Used by af_packet 21636 2 rfcomm 39188 2 l2cap 23300 13 rfcomm bluetooth 56964 4 rfcomm,l2cap ipv6 255300 10 ppdev 9348 0 snd_atiixp_modem 16008 0 snd_via82xx_modem 14984 0 snd_intel8x0m 17804 0 cpufreq_conservative 7200 0 cpufreq_ondemand 8084 0 cpufreq_userspace 4120 0 cpufreq_powersave 1792 0 cpufreq_stats 5124 0 freq_table 4484 2 cpufreq_ondemand,cpufreq_stats sbs 14216 0 sbshc 6784 1 sbs bay 6016 0 dock 10124 1 bay iptable_filter 2944 0 ip_tables 13000 1 iptable_filter x_tables 14852 1 ip_tables ext2 69768 1 sbp2 22920 0 lp 11332 0 pcmcia 39852 0 joydev 11840 0 ipw2100 72240 0 ieee80211 34504 1 ipw2100 ieee80211_crypt 6144 1 ieee80211 yenta_socket 26380 5 rsrc_nonstatic 12800 1 yenta_socket pcmcia_core 39440 3 pcmcia,yenta_socket,rsrc_nonstatic snd_intel8x0 33948 4 snd_ac97_codec 99876 4 snd_atiixp_modem,snd_via82xx_modem,snd_intel8x0m,snd_intel8x0 ac97_bus 2176 1 snd_ac97_codec snd_pcm_oss 40736 0 snd_mixer_oss 16896 1 snd_pcm_oss snd_pcm 75400 7 snd_atiixp_modem,snd_via82xx_modem,snd_intel8x0m,snd_intel8x0,snd_ac97_codec,snd_pcm_oss container 4736 0 video 18832 0 output 3712 1 video serio_raw 7044 0 snd_seq_dummy 3972 0 battery 13316 0 ac 6020 0 button 8336 0 snd_seq_oss 34048 0 snd_seq_midi 8480 0 snd_rawmidi 24608 1 snd_seq_midi snd_seq_midi_event 7552 2 snd_seq_oss,snd_seq_midi intel_agp 24596 1 snd_seq 51152 6 snd_seq_dummy,snd_seq_oss,snd_seq_midi,snd_seq_midi_event snd_timer 23556 3 snd_pcm,snd_seq snd_seq_device 8588 5 snd_seq_dummy,snd_seq_oss,snd_seq_midi,snd_rawmidi,snd_seq irda 193852 0 agpgart 33328 1 intel_agp pcspkr 3072 0 parport_pc 35108 1 parport 35912 3 ppdev,lp,parport_pc iTCO_wdt 11808 0 iTCO_vendor_support 3972 1 iTCO_wdt shpchp 33428 0 crc_ccitt 2176 1 irda evdev 11776 6 pci_hotplug 29728 1 shpchp led_class 5124 0 snd 54692 20 snd_atiixp_modem,snd_via82xx_modem,snd_intel8x0m,snd_intel8x0,snd_ac97_codec,snd_pcm_oss,snd_mixer_oss,snd_pcm,snd_seq_dummy,snd_seq_oss,snd_rawmidi,snd_seq,snd_timer,snd_seq_device soundcore 7520 1 snd snd_page_alloc 10504 5 snd_atiixp_modem,snd_via82xx_modem,snd_intel8x0m,snd_intel8x0,snd_pcm wmi_acer 8748 0 rtc 13212 0 psmouse 39056 0 usbhid 30976 0 hid 36480 1 usbhid ext3 133000 2 jbd 43028 1 ext3 mbcache 8192 2 ext2,ext3 sg 36256 0 sr_mod 16804 0 cdrom 36512 1 sr_mod sd_mod 29584 5 pata_acpi 7424 0 ata_generic 7428 0 ohci1394 32688 0 ata_piix 18692 4 ieee1394 92216 2 sbp2,ohci1394 tg3 113540 0 libata 159728 3 pata_acpi,ata_generic,ata_piix scsi_mod 151180 5 sbp2,sg,sr_mod,sd_mod,libata ehci_hcd 36748 0 uhci_hcd 25616 0 usbcore 144108 4 usbhid,ehci_hcd,uhci_hcd thermal 15772 0 processor 28464 2 thermal fan 4740 0 fbcon 41888 0 tileblit 2560 1 fbcon font 8576 1 fbcon bitblit 5888 1 fbcon softcursor 2176 1 bitblit fuse 48404 3
