Mulet, Your modem is supported: Support type needed or chipset: slmodemd An ALSA (Advanced Linux Sound Architecture) modem driver: snd-intel8x0m provides Low Level support enabling contact with the modem hardware. For all BUT Conexant chip soft modems (using hsfmodem software) complementary High Level support is through a Smartlink utility: slmodemd Download from http://linmodems.technion.ac.il/packages/smartlink/ the package SLMODEMD.gcc4.2.tar.gz having a compiled slmodemd. Unpack under Linux with: $ tar zxf SLMODEMD.gcc4.2.tar.gz and read instructions therein. But briefly, the modem is setup with command: sudo slmodemd -c YOUR_COUNTRY --alsa modem:1 reporting dynamic creation of ports: /dev/ttySL0 --> /dev/pts/N , with N some number Read DOCs/Smartlink.txt and Modem/DOCs/YourSystem.txt for follow through guidance. However, you might run into trouble Modem interrupt assignment and sharing: 10: 121 XT-PIC-XT ehci_hcd:usb4, ohci1394, Intel 82801DB-ICH4, eth1 --- Bootup diagnostics for card in PCI slot 00:1f.6 ---- [ 10.155032] ACPI: PCI Interrupt 0000:00:1f.6[B] -> Link [LNKB] -> GSI 10 (level, low) -> IRQ 10 [ 10.155041] ACPI: PCI interrupt for device 0000:00:1f.6 disabled [ 37.890938] ACPI: PCI Interrupt 0000:00:1f.6[B] -> Link [LNKB] -> GSI 10 (level, low) -> IRQ 10 [ 37.890958] PCI: Setting latency timer of device 0000:00:1f.6 to 64 [ 38.143428] ACPI: PCI interrupt for device 0000:00:1f.6 disabled [ 38.143576] Intel ICH Modem: probe of 0000:00:1f.6 failed with error -13 The PCI slot 00:1f.6 of the modem card may be disabled early in a bootup process, but then enabled later. If modem drivers load but the modem is not responsive, read DOCs/Bootup.txt about possible fixes. Send dmesg.txt along with ModemData.txt to discuss@xxxxxxxxxxxxx if help is needed. Regards, Antonio On Thu, Oct 2, 2008 at 3:35 PM, <mulet@xxxxxxxxxxxx> wrote: > -------------------------- System information ---------------------------- > CPU=i686, > Linux version 2.6.24-21-386 (buildd@palmer) (gcc version 4.2.3 (Ubuntu > 4.2.3-2ubuntu7)) #1 Mon Aug 25 16:58:26 UTC 2008 > scanModem update of: 2008_08_26 > The modem symbolic link is /dev/modem -> ttySL0 > There are no blacklisted modem drivers in /etc/modprobe* files > Attached USB devices are: > ID 04b4:6560 Cypress Semiconductor Corp. CY7C65640 USB-2.0 "TetraHub" > ID 04d9:0499 Holtek Semiconductor, Inc. > > USB modems not recognized > > For candidate card in slot 00:1f.6, firmware information and bootup > diagnostics are: > PCI slot PCI ID SubsystemID Name > ---------- --------- --------- -------------- > 00:1f.6 8086:24c6 1025:0051 Modem: Intel Corporation 82801DB/DBL/DBM > > Modem interrupt assignment and sharing: > 10: 121 XT-PIC-XT ehci_hcd:usb4, ohci1394, Intel > 82801DB-ICH4, eth1 > --- Bootup diagnostics for card in PCI slot 00:1f.6 ---- > [ 10.155032] ACPI: PCI Interrupt 0000:00:1f.6[B] -> Link [LNKB] -> GSI > 10 (level, low) -> IRQ 10 > [ 10.155041] ACPI: PCI interrupt for device 0000:00:1f.6 disabled > [ 37.890938] ACPI: PCI Interrupt 0000:00:1f.6[B] -> Link [LNKB] -> GSI > 10 (level, low) -> IRQ 10 > [ 37.890958] PCI: Setting latency timer of device 0000:00:1f.6 to 64 > [ 38.143428] ACPI: PCI interrupt for device 0000:00:1f.6 disabled > [ 38.143576] Intel ICH Modem: probe of 0000:00:1f.6 failed with error -13 > > The PCI slot 00:1f.6 of the modem card may be disabled early in > a bootup process, but then enabled later. If modem drivers load > but the modem is not responsive, read DOCs/Bootup.txt about possible fixes. > Send dmesg.txt along with ModemData.txt to discuss@xxxxxxxxxxxxx > if help is needed. > > > > ===== Advanced Linux Sound Architecture (ALSA) diagnostics ===== > The ALSA packages provide audio support and also drivers for some modems. > ALSA diagnostics are written during bootup to /proc/asound/ folders. > > The ALSA verion is 1.0.16 > The modem cards detected by "aplay -l" are: None > > > The /proc/asound/pcm file reports: > ----------------------- > 00-04: Intel ICH - IEC958 : Intel 82801DB-ICH4 - IEC958 : playback 1 > 00-03: Intel ICH - ADC2 : Intel 82801DB-ICH4 - ADC2 : capture 1 > 00-02: Intel ICH - MIC2 ADC : Intel 82801DB-ICH4 - MIC2 ADC : capture 1 > 00-01: Intel ICH - MIC ADC : Intel 82801DB-ICH4 - MIC ADC : capture 1 > 00-00: Intel ICH : Intel 82801DB-ICH4 : playback 1 : capture 1 > > about /proc/asound/cards: > ------------------------ > 0 [I82801DBICH4 ]: ICH4 - Intel 82801DB-ICH4 > Intel 82801DB-ICH4 with ALC202 at irq 10 > === Finished firmware and bootup diagnostics, next deducing cogent > software. === > > Predictive diagnostics for card in bus 00:1f.6: > Modem chipset detected on > NAME="Modem: Intel Corporation 82801DB/DBL/DBM " > CLASS=0703 > PCIDEV=8086:24c6 > SUBSYS=1025:0051 > IRQ=10 > SOFT=8086:24c6.MC97 > CodecArchived=SIL27 > IDENT=slmodemd > SLMODEMD_DEVICE=modem:1 > Driver=snd-intel8x0m > > For candidate modem in: 00:1f.6 > 0703 Modem: Intel Corporation 82801DB/DBL/DBM > Primary device ID: 8086:24c6 > Subsystem PCI_id 1025:0051 > Softmodem codec or chipset from diagnostics: > from Archives: SIL27 > > > > Support type needed or chipset: slmodemd > > An ALSA (Advanced Linux Sound Architecture) modem driver: snd-intel8x0m > provides Low Level support enabling contact with the modem hardware. > For all BUT Conexant chip soft modems (using hsfmodem software) > complementary High Level support is through a Smartlink utility: slmodemd > > Download from http://linmodems.technion.ac.il/packages/smartlink/ > the package SLMODEMD.gcc4.2.tar.gz having a compiled slmodemd. Unpack > under Linux with: > $ tar zxf SLMODEMD.gcc4.2.tar.gz > and read instructions therein. But briefly, the modem is setup with command: > sudo slmodemd -c YOUR_COUNTRY --alsa modem:1 > reporting dynamic creation of ports: > /dev/ttySL0 --> /dev/pts/N , with N some number > Read DOCs/Smartlink.txt and Modem/DOCs/YourSystem.txt for follow through > guidance. > > ----------------end Softmodem section -------------- > > Writing DOCs/Intel.txt > Writing DOCs/Smartlink.txt > ============ end Smartlink section ===================== > > Completed candidate modem analyses. > > The base of the UDEV device file system is: /dev/.udev > > Versions adequately match for the compiler installed: 4.2.3 > and the compiler used in kernel assembly: 4.2.4 > > linux-headers-2.6.24-21-386 resources needed for compiling are not > manifestly ready! > > If compiling is necessary packages must be installed, providing: > linux-headers-2.6.24-21-386 > Compressed files at: /usr/src/sl-modem.tar.bz2 > > > If a driver compilation fails, with message including some lack of some > FileName.h (stdio.h for example), then > Some additional kernel-header files need installation to /usr/include. The > minimal additional packages are libc6-dev > and any of its dependents, under Ubuntu linux-libc-dev > > If an alternate ethernet connection is available, > $ apt-get update > $ apt-get -s install linux-kernel-devel > will install needed packages. > For Debian/Ubuntu related distributions, run the following command to > display the needed package list: > > Otherwise packages have to be found through http://packages.ubuntu.com > Once downloaded and transferred into a Linux partition, > they can be installed alltogether with: > $ sudo dpkg -i *.deb > > > Checking pppd properties: > -rwsr-xr-- 1 root dip 269256 2007-10-04 15:57 /usr/sbin/pppd > > In case of an "error 17" "serial loopback" problem, see: > http://linmodems.technion.ac.il/linmodems/archive-sixth/msg02637.html > > To enable dialout without Root permission do: > $ su - root (not for Ubuntu) > sudo chmod a+x /usr/sbin/pppd > or under Ubuntu related Linuxes > sudo chmod a+x /usr/sbin/pppd > > Checking settings of: /etc/ppp/options > asyncmap 0 > noauth > crtscts > lock > hide-password > modem > proxyarp > lcp-echo-interval 30 > lcp-echo-failure 4 > noipx > > In case of a message like: > Warning: Could not modify /etc/ppp/pap-secrets: Permission denied > see http://linmodems.technion.ac.il/bigarch/archive-sixth/msg04656.html > > Read Modem/DOCs/YourSystem.txt concerning other COMM channels: eth0 > Which can interfere with Browser naviagation. > > Don't worry about the following, it is for experts should trouble > shooting be necessary. > ========================================================== > > # start/stop the daemon when the USB modem is connected > KERNEL=="slusb[0-9]*", GROUP="dialout", RUN+="/etc/init.d/sl-modem-daemon" > Checking for modem support lines: > -------------------------------------- > /device/modem symbolic link: lrwxrwxrwx 1 root root 6 2008-10-02 > 11:21 /dev/modem -> ttySL0 > slmodemd created symbolic link /dev/ttySL0: > Within /etc/udev/ files: > /etc/udev/rules.d/030_sl-modem-daemon.rules:# start/stop the daemon when > the USB modem is connected > /etc/udev/rules.d/030_sl-modem-daemon.rules:KERNEL=="slusb[0-9]*", > GROUP="dialout", RUN+="/etc/init.d/sl-modem-daemon" > /etc/udev/sl-modem-daemon.rules:# start/stop the daemon when the USB modem > is connected > /etc/udev/sl-modem-daemon.rules:KERNEL=="slusb[0-9]*", GROUP="dialout", > RUN+="/etc/init.d/sl-modem-daemon" > Within /etc/modprobe.conf files: > /etc/modprobe.d/blacklist-modem:# Uncomment these entries in order to > blacklist unwanted modem drivers > /etc/modprobe.d/blacklist-modem:# blacklist snd-atiixp-modem > /etc/modprobe.d/blacklist-modem:# blacklist snd-via82xx-modem > /etc/modprobe.d/alsa-base:options snd-atiixp-modem index=-2 > /etc/modprobe.d/alsa-base:options snd-via82xx-modem index=-2 > /etc/modprobe.d/sl-modem-daemon.modutils:install slamr modprobe > --ignore-install ungrab-winmodem ; modprobe --ignore-install slamr; test > -e /dev/slamr0 || (/bin/mknod -m 660 /dev/slamr0 c 242 0 2>/dev/null && > chgrp dialout /dev/slamr0) > Within any ancient /etc/devfs files: > > Within ancient kernel 2.4.n /etc/module.conf files: > > --------- end modem support lines -------- > > > > > ----------------------------------------- > This email was sent using SquirrelMail. > > -- > This message has been scanned for viruses and > dangerous content by MailScanner, and is > believed to be clean. > >
