I have a Compaq Presario2103us. After a disk crash, I loaded openSUSE.
Now I want to update to the new version of openSUSE (11.0), but I no
longer have access to a DSL line. I have never been able to get the
modem to work, but now I want to try again. Can anyone help?
I am absolutely new to Linux.... so verbose help would be appreciated.
Many thanx.............. jt
--
Jim Tolbert
RiverRidge@xxxxxxxxxxxxxx
Only plain text email is forwarded by the Discuss@xxxxxxxxxxxxx List Server,
as HTML can contain viruses. Use as the email Subject Line:
YourName, YourCountry
Welcome to openSUSE 10.2 (i586) - Kernel kernel 2.6.18.2-34-default
With this Subject Line cogent experts will be alerted, and useful case names left in the Archive.
YourCountry will enable Country specific guidance. Linux experts in YourCountry
can be found through: http://www.linux.org/groups/index.html.
They will know your Country's modem code, which may be essential for dialup service.
Responses from Discuss@xxxxxxxxxxxxx are sometimes blocked by an Internet Provider mail filters.
So in a day, also check the Archived responses at http://www.linmodems.org
-------------------------- System information ----------------------------
CPU=i686,
Welcome to openSUSE 10.2 (i586) - Kernel
Linux version 2.6.18.2-34-default (geeko@buildhost) (gcc version 4.1.2 20061115 (prerelease) (SUSE Linux)) #1 SMP Mon Nov 27 11:46:27 UTC 2006
scanModem update of: 2008_08_26
Modem drivers blocked from loading during bootup are listed in /etc/modprobe* file lines:
/etc/modprobe.d/blacklist:blacklist snd-atiixp-modem
/etc/modprobe.d/blacklist:blacklist snd-via82xx-modem
/etc/modprobe.d/blacklist:blacklist snd-intel8x0m
Attached USB devices are:
ID 0781:5151 SanDisk Corp. Cruzer Micro 256/512MB Flash Drive
ID 04f3:0213 Elan Microelectronics Corp.
USB modems not recognized
For candidate card in slot 00:08.0, firmware information and bootup diagnostics are:
PCI slot PCI ID SubsystemID Name
---------- --------- --------- --------------
00:08.0 10b9:5457 103c:0024 Modem: ALi Corporation M5457 AC'97 Modem Controller
Modem interrupt assignment and sharing:
--- Bootup diagnostics for card in PCI slot 00:08.0 ----
ACPI: PCI Interrupt 0000:00:08.0[A] -> Link [LNKG] -> GSI 3 (level, low) -> IRQ 3
0000:00:08.0: ttyS1 at I/O 0x8828 (irq = 3) is a 8250
0000:00:08.0: ttyS2 at I/O 0x8840 (irq = 3) is a 8250
0000:00:08.0: ttyS3 at I/O 0x8850 (irq = 3) is a 8250
Couldn't register serial port 0000:00:08.0: -28
For candidate card in slot 00:06.0, firmware information and bootup diagnostics are:
PCI slot PCI ID SubsystemID Name
---------- --------- --------- --------------
00:06.0 10b9:5451 103c:0024 Multimedia audio controller: ALi Corporation M5451 PCI AC-Link Controller Audio Device
Modem interrupt assignment and sharing:
5: 0 XT-PIC ALI 5451
--- Bootup diagnostics for card in PCI slot 00:06.0 ----
ACPI: PCI Interrupt 0000:00:06.0[A] -> Link [LNKH] -> GSI 5 (level, low) -> IRQ 5
===== Advanced Linux Sound Architecture (ALSA) diagnostics =====
The ALSA packages provide audio support and also drivers for some modems.
ALSA diagnostics are written during bootup to /proc/asound/ folders.
The ALSA verion is 1.0.12
The modem cards detected by "aplay -l" are: None
The /proc/asound/pcm file reports:
-----------------------
00-00: ALI 5451 : ALI 5451 : playback 32 : capture 1
about /proc/asound/cards:
------------------------
0 [A5451 ]: ALI5451 - ALI 5451
ALI 5451 at 0x8400, irq 5
=== Finished firmware and bootup diagnostics, next deducing cogent software. ===
Predictive diagnostics for card in bus 00:06.0:
Modem chipset detected on
NAME="Multimedia audio controller: ALi Corporation M5451 PCI AC-Link Controller Audio Device "
CLASS=0401
PCIDEV=10b9:5451
SUBSYS=103c:0024
IRQ=5
SOFT=10b9:5451.MC97
CodecArchived=CXT
CodecClass=CXT
IDENT=hsfmodem
Driver=hsfmodem-drivers
For candidate modem in: 00:06.0
0401 Multimedia audio controller: ALi Corporation M5451 PCI AC-Link Controller Audio Device
Primary device ID: 10b9:5451
Subsystem PCI_id 103c:0024
Softmodem codec or chipset from diagnostics:
from Archives: CXT, a Conexant type using hsfmodem software.
CXTnn is a generic for all CXTnumbers, with Linuxant hsfmodem software support.
Support type needed or chipset: hsfmodem
For owners of a Dell PCs with Conexant HSF modems, a driver source package with full speed enabled is available, but requires driver compiling. Read DOCs/Conexant.txt
Start at http://www.linuxant.com/drivers/hsf/downloads-license.php to find the
hsfmodem package matching your System. For several Linux distros, there are
precompiled drivers matched to specific kernels. These have within the FileName,
your KernelVersion: 2.6.18.2_34_default
They can be found through http://www.linuxant.com/drivers/hsf/full/downloads.php
A more precise location may be given a few paragraphs below.
If an EXACT Match with your your KernelVersion is not found, one of the
"Generic packages with source" near the bottom of the page must be used.
Downloaded packages must be moved into the Linux partition (home folder is OK)
and unzipped with:
unzip hsf*.zip
The installation command for a .deb suffic packages is, with root/adm permission:
dpkg -i hsf*.deb
while for .rpm suffix it is, with:
rpm -i hsf*.rpm
Start at http://www.linuxant.com/drivers/hsf/full for
eventually download of a hsfmodem-7.68.00.12full_k.???.zip package
with ??? the package type (deb, rpm, tar etc)
These packages have compiled drivers but will also compile a driver,
if there is a mismatch between the resident kernel and provided driver.
The generic hsfmodem-7.68.00.12full.tar.gz package only provides compiling support
Read DOCs/Conexant.txt
Writing DOCs/Conexant.txt
Predictive diagnostics for card in bus 00:08.0:
Modem chipset detected on
NAME="Modem: ALi Corporation M5457 AC'97 Modem Controller"
CLASS=0703
PCIDEV=10b9:5457
SUBSYS=103c:0024
IRQ=3
SOFT=10b9:5457.MC97
CodecArchived=CXT
CodecClass=CXT
IDENT=hsfmodem
Driver=hsfmodem-drivers
For candidate modem in: 00:08.0
0703 Modem: ALi Corporation M5457 AC'97 Modem Controller
Primary device ID: 10b9:5457
Subsystem PCI_id 103c:0024
Softmodem codec or chipset from diagnostics:
from Archives: CXT, a Conexant type using hsfmodem software.
CXTnn is a generic for all CXTnumbers, with Linuxant hsfmodem software support.
Support type needed or chipset: hsfmodem
For owners of a Dell PCs with Conexant HSF modems, a driver source package with full speed enabled is available, but requires driver compiling. Read DOCs/Conexant.txt
Start at http://www.linuxant.com/drivers/hsf/downloads-license.php to find the
hsfmodem package matching your System. For several Linux distros, there are
precompiled drivers matched to specific kernels. These have within the FileName,
your KernelVersion: 2.6.18.2_34_default
They can be found through http://www.linuxant.com/drivers/hsf/full/downloads.php
A more precise location may be given a few paragraphs below.
If an EXACT Match with your your KernelVersion is not found, one of the
"Generic packages with source" near the bottom of the page must be used.
Downloaded packages must be moved into the Linux partition (home folder is OK)
and unzipped with:
unzip hsf*.zip
The installation command for a .deb suffic packages is, with root/adm permission:
dpkg -i hsf*.deb
while for .rpm suffix it is, with:
rpm -i hsf*.rpm
Start at http://www.linuxant.com/drivers/hsf/full for
eventually download of a hsfmodem-7.68.00.12full_k.???.zip package
with ??? the package type (deb, rpm, tar etc)
These packages have compiled drivers but will also compile a driver,
if there is a mismatch between the resident kernel and provided driver.
The generic hsfmodem-7.68.00.12full.tar.gz package only provides compiling support
Read DOCs/Conexant.txt
Writing DOCs/Conexant.txt
Completed candidate modem analyses.
The base of the UDEV device file system is: /dev/.udev
Versions adequately match for the compiler installed: 4.1.2
and the compiler used in kernel assembly: 4.1.2
linux-headers-2.6.18.2-34-default resources needed for compiling are not manifestly ready!
If compiling is necessary packages must be installed, providing:
kernel-source-2.6.18.2-34-default
If a driver compilation fails, with message including some lack of some FileName.h (stdio.h for example), then
Some additional kernel-header files need installation to /usr/include. The minimal additional packages are libc6-dev
and any of its dependents, under Ubuntu linux-libc-dev
If an alternate ethernet connection is available,
$ apt-get update
$ apt-get -s install linux-kernel-devel
will install needed packages.
For Debian/Ubuntu related distributions, run the following command to display the needed package list:
Otherwise packages have to be found through http://packages.ubuntu.com
Once downloaded and transferred into a Linux partition,
they can be installed alltogether with:
$ sudo dpkg -i *.deb
Checking pppd properties:
-rwxr-xr-x 1 root dialout 295488 2006-11-25 13:50 /usr/sbin/pppd
In case of an "error 17" "serial loopback" problem, see:
http://linmodems.technion.ac.il/linmodems/archive-sixth/msg02637.html
To enable dialout without Root permission do:
$ su - root (not for Ubuntu)
chmod a+x /usr/sbin/pppd
or under Ubuntu related Linuxes
chmod a+x /usr/sbin/pppd
Checking settings of: /etc/ppp/options
noipdefault
noauth
crtscts
lock
modem
asyncmap 0
nodetach
lcp-echo-interval 30
lcp-echo-failure 4
lcp-max-configure 60
lcp-restart 2
idle 600
noipx
file /etc/ppp/filters
In case of a message like:
Warning: Could not modify /etc/ppp/pap-secrets: Permission denied
see http://linmodems.technion.ac.il/bigarch/archive-sixth/msg04656.html
Read Modem/DOCs/YourSystem.txt concerning other COMM channels: eth0
Which can interfere with Browser naviagation.
Don't worry about the following, it is for experts should trouble shooting be necessary.
==========================================================
Checking for modem support lines:
--------------------------------------
/device/modem symbolic link:
slmodemd created symbolic link /dev/ttySL0:
Within /etc/udev/ files:
/etc/udev/rules.d/50-udev-default.rules:KERNEL=="mwave", NAME="modems/%k", GROUP="uucp"
/etc/udev/rules.d/31-network.rules:SUBSYSTEM=="net", ENV{INTERFACE}=="ppp*|ippp*|isdn*|plip*|lo*|irda*|dummy*|ipsec*|tun*|tap*|bond*|vlan*|modem*|dsl*", GOTO="skip_ifup"
Within /etc/modprobe.conf files:
/etc/modprobe.conf:# Linux ACP modem (Mwave)
/etc/modprobe.d/blacklist:# ALSA PCI sound/modem modules - should be configured via yast
/etc/modprobe.d/blacklist:blacklist snd-atiixp-modem
/etc/modprobe.d/blacklist:blacklist snd-via82xx-modem
Within any ancient /etc/devfs files:
Within ancient kernel 2.4.n /etc/module.conf files:
--------- end modem support lines --------
