Stephen, # slmodemd -c USA --alsa hw:0,6 is the correct command and you should be able to use it from your home older, i.e., don't bother to # cd /usr/sbin/ The problem with /lib/tls/i686/cmov/libc.so.6 is I suspect some subtle versioning issue as we haven't encountered it before. First check your settings in /etc/apt/sources.list Then from your ethernet connection do $ sudo apt-get update $ sudo apt-get upgrade. Upgrade to a more recent kernel if your can also. Then retry # slmodemd -c USA --alsa hw:0,6 MarvS On Sun, Sep 14, 2008 at 8:58 PM, <stephenc@xxxxxxxx> wrote: > Hello, > > I am using a Toshiba A105-S4334 with Debian Etch r4a installed from KDE > CD1. If I need to answer more questions, please be patient; I am borrowing > an internet connection to send this so it may take a while to reply. > > Thank you, > StephenC. > > I believe that I have followed the directions correctly, but I am getting > stuck. Below is my error and my ModemData.txt. First my error: > > When I get to > " and read instructions therein. But briefly, the modem is setup with > command: > slmodemd -c YOUR_COUNTRY --alsa hw:0,6 > " > > Here is what I get > > "scl1:/usr/sbin# slmodemd -c USA --alsa hw:0,6 > slmodemd: /lib/tls/i686/cmov/libc.so.6: version `GLIBC_2.4' not found > (required by slmodemd) > scl1:/usr/sbin# slmodemd --alsa -c USA modem:1 > slmodemd: /lib/tls/i686/cmov/libc.so.6: version `GLIBC_2.4' not found > (required by slmodemd) > scl1:/usr/sbin# find /lib -name libc.so.6 > /lib/tls/i686/cmov/libc.so.6 > /lib/tls/libc.so.6 > /lib/libc.so.6 > scl1:/usr/sbin# > " > > I've installed "libc6", "libc6-i686", and "libc6-dev". I tried to to > "apt-get -s install linux-kernel-devel" as suggested further down, but > that gave me: > "scl1:~# apt-get -s install linux-kernel-devel > Reading package lists... Done > Building dependency tree... Done > E: Couldn't find package linux-kernel-devel > " > > Here is my ModemData.txt: > > Only plain text email is forwarded by the Discuss@xxxxxxxxxxxxx List > Server, > as HTML can contain viruses. Use as the email Subject Line: > YourName, YourCountry Debian GNU/Linux 4.0 kernel 2.6.18-6-686 > With this Subject Line cogent experts will be alerted, and useful case > names left in the Archive. > YourCountry will enable Country specific guidance. Linux experts in > YourCountry > can be found through: http://www.linux.org/groups/index.html. > They will know your Country's modem code, which may be essential for > dialup service. > Responses from Discuss@xxxxxxxxxxxxx are sometimes blocked by an Internet > Provider mail filters. > So in a day, also check the Archived responses at http://www.linmodems.org > -------------------------- System information ---------------------------- > CPU=i686, Debian GNU/Linux 4.0 > Linux version 2.6.18-6-686 (Debian 2.6.18.dfsg.1-22) (dannf@xxxxxxxxxx) > (gcc version 4.1.2 20061115 (prerelease) (Debian 4.1.1-21)) #1 SMP Tue Jun > 17 21:31:27 UTC 2008 > scanModem update of: 2008_08_26 > > There are no blacklisted modem drivers in /etc/modprobe* files > Attached USB devices are: > ID 1267:0103 Logic3 / SpectraVideo plc > ID 045e:0083 Microsoft Corp. Basic Optical Mouse > ID 0781:5406 SanDisk Corp. > > USB modems not recognized > > For candidate card in slot 00:1b.0, firmware information and bootup > diagnostics are: > PCI slot PCI ID SubsystemID Name > ---------- --------- --------- -------------- > 00:1b.0 8086:27d8 1179:ff10 Audio device: Intel Corporation 82801G > > Modem interrupt assignment and sharing: > 58: 14705 0 IO-APIC-level HDA Intel > --- Bootup diagnostics for card in PCI slot 00:1b.0 ---- > ACPI: PCI Interrupt 0000:00:1b.0[A] -> GSI 22 (level, low) -> IRQ 58 > PCI: Setting latency timer of device 0000:00:1b.0 to 64 > > > ===== Advanced Linux Sound Architecture (ALSA) diagnostics ===== > The ALSA packages provide audio support and also drivers for some modems. > ALSA diagnostics are written during bootup to /proc/asound/ folders. > > The ALSA verion is 1.0.12 > The modem cards detected by "aplay -l" are: > card 0: Intel [HDA Intel], device 6: Si3054 Modem [Si3054 Modem] > > The /proc/asound/pcm file reports: > ----------------------- > 00-06: Si3054 Modem : Si3054 Modem : playback 1 : capture 1 > 00-00: ALC861 Analog : ALC861 Analog : playback 1 : capture 2 > > about /proc/asound/cards: > ------------------------ > 0 [Intel ]: HDA-Intel - HDA Intel > HDA Intel at 0xdc240000 irq 58 > > PCI slot 00:1b.0 has a High Definition Audio Card > The drivers are in the kernel modules tree at: > /lib/modules/2.6.18-6-686/kernel/sound/pci/hda/snd-hda-intel.ko > The modem codec file for the HDA card is: /proc/asound/card0/codec#1 > -------------------------------------------------------- > Codec: Generic 11c1 Si3054 > Address: 1 > Vendor Id: 0x11c13026 > Subsystem Id: 0x11790001 > Revision Id: 0x100700 > > The audio card hosts a softmodem chip: 0x11c13026 > > The softmodem chip 0x11c13026 is in principle supported by the COMM > support of slmodemd > and the joint snd-hda-intel audio+modem driver, begun with ALSA version > 1.0.13. > For HDA cards with ALC883 chips, an upgrade to ALSA verions 1.0.15 way be > necessary. Instructions for Upgrading snd-hda-intel and its dependent > driver set are at: > http://linmodems.technion.ac.il/bigarch/archive-eighth/msg00838.html > > If not a Conexant modem, the driver snd-hda-intel with its dependent drivers: > snd_hda_intel 17332 0 > snd_hda_codec 137856 1 snd_hda_intel > snd_pcm 68676 3 snd_hda_intel,snd_hda_codec,snd_pcm_oss > snd 47012 6 > snd_hda_intel,snd_hda_codec,snd_pcm_oss,snd_mixer_oss,snd_pcm,snd_timer > snd_page_alloc 10184 2 snd_hda_intel,snd_pcm > ---------- > provide audio + modem support with the modem chip residing on the subsystem. > Any particular card can host any one of several soft modem chips. > > === Finished firmware and bootup diagnostics, next deducing cogent > software. === > > Predictive diagnostics for card in bus 00:1b.0: > Modem chipset detected on > NAME="Audio device: Intel Corporation 82801G " > CLASS=0403 > PCIDEV=8086:27d8 > SUBSYS=1179:ff10 > IRQ=58 > HDA=8086:27d8 > SOFT=8086:27d8.HDA > CHIP=0x11c13026 > IDENT=slmodemd > SLMODEMD_DEVICE=hw:0,6 > Driver=snd-hda-intel > > For candidate modem in: 00:1b.0 > 0403 Audio device: Intel Corporation 82801G > Primary device ID: 8086:27d8 > Subsystem PCI_id 1179:ff10 > Softmodem codec or chipset from diagnostics: 0x11c13026 > from Archives: > The HDA card softmodem chip is 0x11c13026 > > > Support type needed or chipset: slmodemd supporting the snd-hda-intel > audio+modem driver > > An ALSA (Advanced Linux Sound Architecture) modem driver: snd-hda-intel > provides Low Level support enabling contact with the modem hardware. > For all BUT Conexant chip soft modems (using hsfmodem software) > complementary High Level support is through a Smartlink utility: slmodemd > > Download from http://linmodems.technion.ac.il/packages/smartlink/ > the package SLMODEMD.gcc4.1.tar.gz having a compiled slmodemd. Unpack > under Linux with: > $ tar zxf SLMODEMD.gcc4.1.tar.gz > and read instructions therein. But briefly, the modem is setup with command: > slmodemd -c YOUR_COUNTRY --alsa hw:0,6 > reporting dynamic creation of ports: > /dev/ttySL0 --> /dev/pts/N , with N some number > Read DOCs/Smartlink.txt and Modem/DOCs/YourSystem.txt for follow through > guidance. > > ----------------end Softmodem section -------------- > > Writing DOCs/Intel.txt > Writing DOCs/Smartlink.txt > ============ end Smartlink section ===================== > > Completed candidate modem analyses. > > The base of the UDEV device file system is: /dev/.udev > > Versions adequately match for the compiler installed: 4.1.2 > and the compiler used in kernel assembly: 4.1.2 > > > > Minimal compiling resources appear complete: > make utility - /usr/bin/make > Compiler version 4.1 > linuc_headers base folder /lib/modules/2.6.18-6-686/build > > However some compilations and executable functions may need additional > files, > in the FileNames.h (so called kernel "h"eaders) collection installed in > /usr/include/ . > For martian_modem, additional required packages are needed. The also > required headers of package libc6 are commonly installed by default. > Compiling hsfmodem drivers does require linux-libc-dev and libc6-dev > packages, for kernels 2.6.24 and later versions. > In not included on your install CD, search for them at > http://packages.ubuntu.com > or comparable Repository for other Linux distros. > When compiling ALSA drivers, the utility "patch" will also be needed. > > > > For Debian and some related distributions, a package kernel-kbuild-2.6-18 > may be needed to support driver compiling. > > > If a driver compilation fails, with message including some lack of some > FileName.h (stdio.h for example), then > Some additional kernel-header files need installation to /usr/include. The > minimal additional packages are libc6-dev > and any of its dependents, under Ubuntu linux-libc-dev > > If an alternate ethernet connection is available, > $ apt-get update > $ apt-get -s install linux-kernel-devel > will install needed packages. > For Debian/Ubuntu related distributions, run the following command to > display the needed package list: > > Otherwise packages have to be found through http://packages.ubuntu.com > Once downloaded and transferred into a Linux partition, > they can be installed alltogether with: > $ sudo dpkg -i *.deb > > > Checking pppd properties: > -rwsr-xr-- 1 root dip 260920 2007-03-17 15:52 /usr/sbin/pppd > > In case of an "error 17" "serial loopback" problem, see: > http://linmodems.technion.ac.il/linmodems/archive-sixth/msg02637.html > > To enable dialout without Root permission do: > $ su - root (not for Ubuntu) > chmod a+x /usr/sbin/pppd > or under Ubuntu related Linuxes > chmod a+x /usr/sbin/pppd > > Checking settings of: /etc/ppp/options > asyncmap 0 > auth > crtscts > lock > hide-password > modem > proxyarp > lcp-echo-interval 30 > lcp-echo-failure 4 > noipx > > In case of a message like: > Warning: Could not modify /etc/ppp/pap-secrets: Permission denied > see http://linmodems.technion.ac.il/bigarch/archive-sixth/msg04656.html > > Read Modem/DOCs/YourSystem.txt concerning other COMM channels: eth0 > Which can interfere with Browser naviagation. > > Don't worry about the following, it is for experts should trouble > shooting be necessary. > ========================================================== > > Checking for modem support lines: > -------------------------------------- > /device/modem symbolic link: > slmodemd created symbolic link /dev/ttySL0: > Within /etc/udev/ files: > > Within /etc/modprobe.conf files: > /etc/modprobe.d/alsa-base-blacklist:# Uncomment these entries in order to > blacklist unwanted modem drivers > /etc/modprobe.d/alsa-base-blacklist:# blacklist snd-atiixp-modem > /etc/modprobe.d/alsa-base-blacklist:# blacklist snd-via82xx-modem > /etc/modprobe.d/alsa-base:options snd-atiixp-modem index=-2 > /etc/modprobe.d/alsa-base:options snd-via82xx-modem index=-2 > Within any ancient /etc/devfs files: > > Within ancient kernel 2.4.n /etc/module.conf files: > > --------- end modem support lines -------- > > > >
