ModemData.txt

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



 Only plain text email is forwarded by the  Discuss@xxxxxxxxxxxxx List Server,
 as HTML can contain viruses. Use as the email Subject Line:
           YourName, YourCountry 
Welcome to openSUSE 11.0 (i586) - Kernel  kernel 2.6.25.11-0.1-pae 
 With this Subject Line cogent experts will be alerted, and useful case names left in the Archive.
 YourCountry will enable Country specific guidance. Linux experts in YourCountry 
 can be found through: http://www.linux.org/groups/index.html.
They will know your Country's modem code, which may be essential for dialup service.
Responses from Discuss@xxxxxxxxxxxxx are sometimes blocked by an Internet Provider mail filters.
 So in a day, also check the Archived responses at http://www.linmodems.org 
--------------------------  System information ----------------------------
CPU=i686,  
Welcome to openSUSE 11.0 (i586) - Kernel 
Linux version 2.6.25.11-0.1-pae (geeko@buildhost) (gcc version 4.3.1 20080507 (prerelease) [gcc-4_3-branch revision 135036] (SUSE Linux) ) #1 SMP 2008-07-13 20:48:28 +0200
 scanModem update of:  2008_08_26

 There are no blacklisted modem drivers in /etc/modprobe*  files 
Attached USB devices are:
 ID 1d6b:0001 Linux Foundation 1.1 root hub
 ID 1d6b:0001 Linux Foundation 1.1 root hub
 ID 1d6b:0001 Linux Foundation 1.1 root hub
 ID 1d6b:0001 Linux Foundation 1.1 root hub
 ID 0781:550a SanDisk Corp. 
 ID 1058:1100 Western Digital Technologies, Inc. 
 ID 1d6b:0002 Linux Foundation 2.0 root hub

USB modems not recognized

For candidate card in slot 00:09.0, firmware information and bootup diagnostics are:
 PCI slot	PCI ID		SubsystemID	Name
 ----------	---------	---------	--------------
 00:09.0	12b9:1007	12b9:00c2	Communication controller: 3Com Corp, Modem Division USR 56k Internal WinModem

 Modem interrupt assignment and sharing: 
 --- Bootup diagnostics for card in PCI slot 00:09.0 ----

=== Finished firmware and bootup diagnostics, next deducing cogent software. ===

Predictive  diagnostics for card in bus 00:09.0:
	Modem chipset  detected on
NAME="Communication controller: 3Com Corp, Modem Division USR 56k Internal WinModem"
CLASS=0780
PCIDEV=12b9:1007
SUBSYS=12b9:00c2
IRQ=11
IDENT=3COM.winmodem

 For candidate modem in:  00:09.0
   0780 Communication controller: 3Com Corp, Modem Division USR 56k Internal WinModem
      Primary device ID:  12b9:1007
 Support type needed or chipset:	3COM.winmodem
 Under Linux 2.6.n kernels, the chipset is NOT SUPPORTED . Read DOCs/InfoGeneral.txt about alternatives.

----------------end Softmodem section --------------
 Vendor 10b7 3COM Inc. purchased the vendor 12b9 US Robotics modem technology.
 Their winmodems have no Linux support. Their controller chipset modems
 are supported by the Linux serial drivers.
 The PCI id 12b9:1007 modem is Not_Supported.

PCI ID          Name                                    Support status
-------------------------------------------------------------------------------
10b7:1006	3COM 0038TA AC101 - TF Mini-PCI		winmodem, not supported
10b7:1007	3COM 3C556 V.90 Mini-PCI		winmodem, not supported
12b9:1006	US Robotics 3cp803598  Voice		winmodem, not supported
12b9:1007	US Robotics ERL3263A-0 DF GWPCI PC99	winmodem, not supported

12b9:0062	US Robotics erk41926a-0.6 usr 56k	serial driver supported
12b9:1008	US Robotics 3cp803598	                serial driver supported
    
  ====== end 3COM section =======

 Completed candidate modem analyses.

 The base of the UDEV device file system is: /dev/.udev

 Versions adequately match for the compiler installed: 4.3.1
             and the compiler used in kernel assembly: 4.3

 linux-headers-2.6.25.11-0.1-pae resources needed for compiling are not manifestly ready!

 If compiling is necessary packages must be installed, providing:
	 kernel-source-2.6.25.11-0.1-pae


If a driver compilation fails, with message including some lack of some FileName.h (stdio.h for example), then
Some additional kernel-header files need installation to /usr/include. The minimal additional packages are libc6-dev
and any of its dependents, under Ubuntu linux-libc-dev

If an alternate ethernet connection is available,
$  apt-get update
$  apt-get -s install linux-kernel-devel
will install needed packages.
For Debian/Ubuntu related distributions, run the following command to display the needed package list:

Otherwise packages have to be found through http://packages.ubuntu.com
Once downloaded and transferred into a Linux partition,
they can be installed alltogether with:
$ sudo dpkg -i *.deb


Checking pppd properties:
	-rwxr-xr-x 1 root dialout 304644 2008-06-06 16:21 /usr/sbin/pppd

In case of an "error 17" "serial loopback" problem, see:
    http://linmodems.technion.ac.il/linmodems/archive-sixth/msg02637.html

To enable dialout without Root permission do:
	$ su - root  (not for Ubuntu)
         chmod a+x /usr/sbin/pppd
or under Ubuntu related Linuxes
	 chmod a+x /usr/sbin/pppd

Checking settings of:	/etc/ppp/options
noipdefault
noauth
crtscts
lock
modem
asyncmap 0
nodetach
lcp-echo-interval 30
lcp-echo-failure 4
lcp-max-configure 60
lcp-restart 2
idle 600
noipx
file /etc/ppp/filters

In case of a message like:
   Warning: Could not modify /etc/ppp/pap-secrets: Permission denied
see http://linmodems.technion.ac.il/bigarch/archive-sixth/msg04656.html

Read Modem/DOCs/YourSystem.txt concerning other COMM channels: eth0
Which can interfere with Browser naviagation.

 Don't worry about the following, it is for experts should trouble shooting be necessary.
==========================================================

 Checking for modem support lines:
 --------------------------------------
     /device/modem symbolic link:   
slmodemd created symbolic link /dev/ttySL0:  
     Within /etc/udev/ files:
/etc/udev/rules.d/50-udev-default.rules:KERNEL=="mwave",		NAME="modems/mwave", GROUP="uucp"
/etc/udev/rules.d/77-network.rules:SUBSYSTEM=="net", ENV{INTERFACE}=="ppp*|ippp*|isdn*|plip*|lo*|irda*|dummy*|ipsec*|tun*|tap*|bond*|vlan*|modem*|dsl*", GOTO="skip_ifup"
     Within /etc/modprobe.conf files:
/etc/modprobe.conf:# Linux ACP modem (Mwave)
     Within any ancient /etc/devfs files:

     Within ancient kernel 2.4.n /etc/module.conf files:

--------- end modem support lines --------

 Only plain text email is forwarded by the  Discuss@xxxxxxxxxxxxx List Server,
 as HTML can contain viruses. Use as the email Subject Line:
           YourName, YourCountry 
Welcome to openSUSE 11.0 (i586) - Kernel  kernel 2.6.25.11-0.1-pae 
 With this Subject Line cogent experts will be alerted, and useful case names left in the Archive.
 YourCountry will enable Country specific guidance. Linux experts in YourCountry 
 can be found through: http://www.linux.org/groups/index.html.
They will know your Country's modem code, which may be essential for dialup service.
Responses from Discuss@xxxxxxxxxxxxx are sometimes blocked by an Internet Provider mail filters.
 So in a day, also check the Archived responses at http://www.linmodems.org 
--------------------------  System information ----------------------------
CPU=i686,  
Welcome to openSUSE 11.0 (i586) - Kernel 
Linux version 2.6.25.11-0.1-pae (geeko@buildhost) (gcc version 4.3.1 20080507 (prerelease) [gcc-4_3-branch revision 135036] (SUSE Linux) ) #1 SMP 2008-07-13 20:48:28 +0200
 scanModem update of:  2008_08_26

 There are no blacklisted modem drivers in /etc/modprobe*  files 
Attached USB devices are:
 ID 1d6b:0001 Linux Foundation 1.1 root hub
 ID 1d6b:0001 Linux Foundation 1.1 root hub
 ID 1d6b:0001 Linux Foundation 1.1 root hub
 ID 1d6b:0001 Linux Foundation 1.1 root hub
 ID 0781:550a SanDisk Corp. 
 ID 1058:1100 Western Digital Technologies, Inc. 
 ID 1d6b:0002 Linux Foundation 2.0 root hub

USB modems not recognized

For candidate card in slot 00:09.0, firmware information and bootup diagnostics are:
 PCI slot	PCI ID		SubsystemID	Name
 ----------	---------	---------	--------------
 00:09.0	12b9:1007	12b9:00c2	Communication controller: 3Com Corp, Modem Division USR 56k Internal WinModem

 Modem interrupt assignment and sharing: 
 --- Bootup diagnostics for card in PCI slot 00:09.0 ----

=== Finished firmware and bootup diagnostics, next deducing cogent software. ===

Predictive  diagnostics for card in bus 00:09.0:
	Modem chipset  detected on
NAME="Communication controller: 3Com Corp, Modem Division USR 56k Internal WinModem"
CLASS=0780
PCIDEV=12b9:1007
SUBSYS=12b9:00c2
IRQ=11
IDENT=3COM.winmodem

 For candidate modem in:  00:09.0
   0780 Communication controller: 3Com Corp, Modem Division USR 56k Internal WinModem
      Primary device ID:  12b9:1007
 Support type needed or chipset:	3COM.winmodem
 Under Linux 2.6.n kernels, the chipset is NOT SUPPORTED . Read DOCs/InfoGeneral.txt about alternatives.

----------------end Softmodem section --------------
 Vendor 10b7 3COM Inc. purchased the vendor 12b9 US Robotics modem technology.
 Their winmodems have no Linux support. Their controller chipset modems
 are supported by the Linux serial drivers.
 The PCI id 12b9:1007 modem is Not_Supported.

PCI ID          Name                                    Support status
-------------------------------------------------------------------------------
10b7:1006	3COM 0038TA AC101 - TF Mini-PCI		winmodem, not supported
10b7:1007	3COM 3C556 V.90 Mini-PCI		winmodem, not supported
12b9:1006	US Robotics 3cp803598  Voice		winmodem, not supported
12b9:1007	US Robotics ERL3263A-0 DF GWPCI PC99	winmodem, not supported

12b9:0062	US Robotics erk41926a-0.6 usr 56k	serial driver supported
12b9:1008	US Robotics 3cp803598	                serial driver supported
    
  ====== end 3COM section =======

 Completed candidate modem analyses.

 The base of the UDEV device file system is: /dev/.udev

 Versions adequately match for the compiler installed: 4.3.1
             and the compiler used in kernel assembly: 4.3

 linux-headers-2.6.25.11-0.1-pae resources needed for compiling are not manifestly ready!

 If compiling is necessary packages must be installed, providing:
	 kernel-source-2.6.25.11-0.1-pae


If a driver compilation fails, with message including some lack of some FileName.h (stdio.h for example), then
Some additional kernel-header files need installation to /usr/include. The minimal additional packages are libc6-dev
and any of its dependents, under Ubuntu linux-libc-dev

If an alternate ethernet connection is available,
$  apt-get update
$  apt-get -s install linux-kernel-devel
will install needed packages.
For Debian/Ubuntu related distributions, run the following command to display the needed package list:

Otherwise packages have to be found through http://packages.ubuntu.com
Once downloaded and transferred into a Linux partition,
they can be installed alltogether with:
$ sudo dpkg -i *.deb


Checking pppd properties:
	-rwxr-xr-x 1 root dialout 304644 2008-06-06 16:21 /usr/sbin/pppd

In case of an "error 17" "serial loopback" problem, see:
    http://linmodems.technion.ac.il/linmodems/archive-sixth/msg02637.html

To enable dialout without Root permission do:
	$ su - root  (not for Ubuntu)
         chmod a+x /usr/sbin/pppd
or under Ubuntu related Linuxes
	 chmod a+x /usr/sbin/pppd

Checking settings of:	/etc/ppp/options
noipdefault
noauth
crtscts
lock
modem
asyncmap 0
nodetach
lcp-echo-interval 30
lcp-echo-failure 4
lcp-max-configure 60
lcp-restart 2
idle 600
noipx
file /etc/ppp/filters

In case of a message like:
   Warning: Could not modify /etc/ppp/pap-secrets: Permission denied
see http://linmodems.technion.ac.il/bigarch/archive-sixth/msg04656.html

Read Modem/DOCs/YourSystem.txt concerning other COMM channels: eth0
Which can interfere with Browser naviagation.

 Don't worry about the following, it is for experts should trouble shooting be necessary.
==========================================================

 Checking for modem support lines:
 --------------------------------------
     /device/modem symbolic link:   
slmodemd created symbolic link /dev/ttySL0:  
     Within /etc/udev/ files:
/etc/udev/rules.d/50-udev-default.rules:KERNEL=="mwave",		NAME="modems/mwave", GROUP="uucp"
/etc/udev/rules.d/77-network.rules:SUBSYSTEM=="net", ENV{INTERFACE}=="ppp*|ippp*|isdn*|plip*|lo*|irda*|dummy*|ipsec*|tun*|tap*|bond*|vlan*|modem*|dsl*", GOTO="skip_ifup"
     Within /etc/modprobe.conf files:
/etc/modprobe.conf:# Linux ACP modem (Mwave)
     Within any ancient /etc/devfs files:

     Within ancient kernel 2.4.n /etc/module.conf files:

--------- end modem support lines --------


[Index of Archives]     [Linux Media Development]     [Asterisk]     [DCCP]     [Netdev]     [X.org]     [Xfree86]     [Fedora Women]     [Linux USB]

  Powered by Linux