Hello All
Iam new to this list, I have been trying to get my USB modem to connect to
my Hylafax Server which is based on Ubuntu 8.04.1 Server.
I have been trying to follow through the various files etc, but I seem to
keep going wrong some where and just can't get this to work, I have just
about given up after a month of trying to get this to work.
Would some kind person be able to help me please, and if possible provide
a simplish step by step guid on how I should get this setup and to work.
Thanks in advance.
ANdrew
Only plain text email is forwarded by the Discuss@xxxxxxxxxxxxx List Server,
as HTML can contain viruses. Use as the email Subject Line:
YourName, YourCountry kernel 2.6.24-21-server
With this Subject Line cogent experts will be alerted, and useful case names left in the Archive.
YourCountry will enable Country specific guidance. Linux experts in YourCountry
can be found through: http://www.linux.org/groups/index.html.
They will know your Country's modem code, which may be essential for dialup service.
Responses from Discuss@xxxxxxxxxxxxx are sometimes blocked by an Internet Provider mail filters.
So in a day, also check the Archived responses at http://www.linmodems.org
-------------------------- System information ----------------------------
CPU=i686,
Linux version 2.6.24-21-server (buildd@palmer) (gcc version 4.2.3 (Ubuntu 4.2.3-2ubuntu7)) #1 SMP Mon Aug 25 18:06:43 UTC 2008
scanModem update of: 2008_08_26
There are no blacklisted modem drivers in /etc/modprobe* files
Attached USB devices are:
ID 0483:7554 SGS Thomson Microelectronics 56k SoftModem
For candidate card in slot 01:0b.0, firmware information and bootup diagnostics are:
PCI slot PCI ID SubsystemID Name
---------- --------- --------- --------------
01:0b.0 11c1:0458 141d:9300 Communication controller: Agere Systems LT WinModem
Modem interrupt assignment and sharing:
15: 102 IO-APIC-edge libata
--- Bootup diagnostics for card in PCI slot 01:0b.0 ----
=== Finished firmware and bootup diagnostics, next deducing cogent software. ===
Predictive diagnostics for card in bus 001:
Modem chipset detected on
SLOT="Bus 001 Device 002:"
NAME="SGS Thomson Microelectronics 56k SoftModem"
bus=001
USBmodemID=0483:7554
IDENT=slusb
Driver=slusb
For candidate modem in: 001
SGS Thomson Microelectronics 56k SoftModem
Primary device ID: 0483:7554
Support type needed or chipset: slusb
----------------end Softmodem section --------------
The modem is supported by the Smartlink slusb
plus the slmodemd helper utility. Read the
DOCs/Smartlink.txt and Modem/DOCs/YourSystem.txt for follow through guidance.
For 2.6.24-21-server compiling drivers is necessary. As of October 2007 the current packages at
http://linmodems.technion.ac.il/packages/smartlink/ are the
ungrab-winmodem-20070505.tar.gz and slmodem-2.9.11-20080126.tar.gz
Writing DOCs/Smartlink.txt
============ end Smartlink section =====================
Vendor 11c1 is Lucent Technologies with modem technology now under LSI Inc.
Their Linux code developer/maintainer is Soumyendu Sarkar. Support for a chipset and its
continued maintenance is only initiated at the request of a major chipset buyer,
or comparable sponsor. Several different modem chipset types are produced:
with varying support under Linux.
Device ID Support Name Comment
--------- ------------- ----------- -----------------------------
0480 serial_drivers Venus controller chipset 1673JV7
0440-045d martian Mars/Apollo DSP (digital signal processing) chipsets
0462 none 56K.V90/ADSL Wildwire
048d none SV2P soft modem
048(c or f) AGRSM SV2P soft modem
0600 none soft modem, very few in the field.
0620 AGRSM Pinball soft modem, in some HP desktop PCs
011c11040 AGRSM hosted on High Definition Audio cards
062(1-3) none SV92PP,Pinball soft modem, in some HP desktop PCs
martian - At http://linmodems.technion.ac.il/packages/ltmodem/kernel-2.6/martian/
AGRSM - At http://linmodems.technion.ac.il/packages/ltmodem/11c11040/
Compiling resources for a driver module pair: agrmodem.ko + agrserial.ko
Use the agrsm-HDA-20080721-ALSA15.tar.bz2 or agrsm-HDA-20080721.tar.bz2
Read the agrsm_howto.txt. For 11c11040 chips, also the HOWTO-Agere-11c11040-HDA.html
-------------- end Agere Systems section -------------------
Predictive diagnostics for card in bus 01:0b.0:
Modem chipset detected on
NAME="Communication controller: Agere Systems LT WinModem "
CLASS=0780
PCIDEV=11c1:0458
SUBSYS=141d:9300
IRQ=5
IDENT=Agere.DSP
For candidate modem in: 01:0b.0
0780 Communication controller: Agere Systems LT WinModem
Primary device ID: 11c1:0458
Support type needed or chipset: Agere.DSP
----------------end Softmodem section --------------
The modem has a Lucent/Agere/LSI Mars or Apollo DSP (digital signal processing) chipset.
Support packages for 2.6.n kernels are at:
http://linmodems.technion.ac.il/packages/ltmodem/kernel-2.6/martian/
Always use the most update for kernels after 2.6.20, currently martian-full-20080625.tar.gz
For kernels 2.6.20 and less, usr martian-full-20080407.tar.gz.
See DOCs/AgereDSP.txt for Details.
Vendor 11c1 is Lucent Technologies with modem technology now under LSI Inc.
Their Linux code developer/maintainer is Soumyendu Sarkar. Support for a chipset and its
continued maintenance is only initiated at the request of a major chipset buyer,
or comparable sponsor. Several different modem chipset types are produced:
with varying support under Linux.
Device ID Support Name Comment
--------- ------------- ----------- -----------------------------
0480 serial_drivers Venus controller chipset 1673JV7
0440-045d martian Mars/Apollo DSP (digital signal processing) chipsets
0462 none 56K.V90/ADSL Wildwire
048d none SV2P soft modem
048(c or f) AGRSM SV2P soft modem
0600 none soft modem, very few in the field.
0620 AGRSM Pinball soft modem, in some HP desktop PCs
011c11040 AGRSM hosted on High Definition Audio cards
062(1-3) none SV92PP,Pinball soft modem, in some HP desktop PCs
martian - At http://linmodems.technion.ac.il/packages/ltmodem/kernel-2.6/martian/
AGRSM - At http://linmodems.technion.ac.il/packages/ltmodem/11c11040/
Compiling resources for a driver module pair: agrmodem.ko + agrserial.ko
Use the agrsm-HDA-20080721-ALSA15.tar.bz2 or agrsm-HDA-20080721.tar.bz2
Read the agrsm_howto.txt. For 11c11040 chips, also the HOWTO-Agere-11c11040-HDA.html
0x0458 -- Mars 3 Mercury data/fax/tam only.
-------------- end Agere Systems section -------------------
Completed candidate modem analyses.
The base of the UDEV device file system is: /dev/.udev
Versions adequately match for the compiler installed: 4.2.3
and the compiler used in kernel assembly: 4.2.3
Minimal compiling resources appear complete:
make utility - /usr/bin/make
Compiler version 4.2
linuc_headers base folder /lib/modules/2.6.24-21-server/build
However some compilations and executable functions may need additional files,
in the FileNames.h (so called kernel "h"eaders) collection installed in /usr/include/ .
For martian_modem, additional required packages are needed. The also required headers of package libc6 are commonly installed by default.
Compiling hsfmodem drivers does require linux-libc-dev and libc6-dev packages, for kernels 2.6.24 and later versions.
In not included on your install CD, search for them at http://packages.ubuntu.com
or comparable Repository for other Linux distros.
When compiling ALSA drivers, the utility "patch" will also be needed.
If a driver compilation fails, with message including some lack of some FileName.h (stdio.h for example), then
Some additional kernel-header files need installation to /usr/include. The minimal additional packages are libc6-dev
and any of its dependents, under Ubuntu linux-libc-dev
If an alternate ethernet connection is available,
$ apt-get update
$ apt-get -s install linux-kernel-devel
will install needed packages.
For Debian/Ubuntu related distributions, run the following command to display the needed package list:
Otherwise packages have to be found through http://packages.ubuntu.com
Once downloaded and transferred into a Linux partition,
they can be installed alltogether with:
$ sudo dpkg -i *.deb
Checking pppd properties:
-rwsr-xr-- 1 root dip 269256 2007-10-04 20:57 /usr/sbin/pppd
In case of an "error 17" "serial loopback" problem, see:
http://linmodems.technion.ac.il/linmodems/archive-sixth/msg02637.html
To enable dialout without Root permission do:
$ su - root (not for Ubuntu)
sudo chmod a+x /usr/sbin/pppd
or under Ubuntu related Linuxes
sudo chmod a+x /usr/sbin/pppd
Checking settings of: /etc/ppp/options
asyncmap 0
noauth
crtscts
lock
hide-password
modem
proxyarp
lcp-echo-interval 30
lcp-echo-failure 4
noipx
In case of a message like:
Warning: Could not modify /etc/ppp/pap-secrets: Permission denied
see http://linmodems.technion.ac.il/bigarch/archive-sixth/msg04656.html
Read Modem/DOCs/YourSystem.txt concerning other COMM channels: eth0
Which can interfere with Browser naviagation.
Don't worry about the following, it is for experts should trouble shooting be necessary.
==========================================================
# start/stop the daemon when the USB modem is connected
KERNEL=="slusb[0-9]*", GROUP="dialout", RUN+="/etc/init.d/sl-modem-daemon"
Checking for modem support lines:
--------------------------------------
/device/modem symbolic link:
slmodemd created symbolic link /dev/ttySL0:
Within /etc/udev/ files:
/etc/udev/sl-modem-daemon.rules:# start/stop the daemon when the USB modem is connected
/etc/udev/sl-modem-daemon.rules:KERNEL=="slusb[0-9]*", GROUP="dialout", RUN+="/etc/init.d/sl-modem-daemon"
Within /etc/modprobe.conf files:
/etc/modprobe.d/sl-modem-daemon.modutils:install slamr modprobe --ignore-install ungrab-winmodem ; modprobe --ignore-install slamr; test -e /dev/slamr0 || (/bin/mknod -m 660 /dev/slamr0 c 242 0 2>/dev/null && chgrp dialout /dev/slamr0)
Within any ancient /etc/devfs files:
Within ancient kernel 2.4.n /etc/module.conf files:
--------- end modem support lines --------
