Amir, hsfmodem-7.60.00.00oem.tar is likely to old for your current 2.6.25 kernel >From http://www.linuxant.com/drivers/hsf/full/downloads.php get the hsfmodem-7.68.00.12full-1.i386.rpm.zip MarvS On Sun, Sep 7, 2008 at 12:38 PM, Amir Ghoochani <ghoochani@xxxxxxxxx> wrote: > i have two computer and so two modem and so o have attached tow modem > data.txt file. > > i am sending for the second time and first time i could not get right > answer. > > and i have this file as well: > hsfmodem-7.60.00.00oem.tar > > it was in my modem drier cd in folder Linux and other overrating systems > were there as well vista , vista 64 and ... . > > > Only plain text email is forwarded by the Discuss@xxxxxxxxxxxxx List > Server, > as HTML can contain viruses. Use as the email Subject Line: > YourName, YourCountry > Welcome to openSUSE 11.0 (i586) - Kernel kernel 2.6.25.5-1.1-pae > With this Subject Line cogent experts will be alerted, and useful case > names left in the Archive. > YourCountry will enable Country specific guidance. Linux experts in > YourCountry > can be found through: http://www.linux.org/groups/index.html. > They will know your Country's modem code, which may be essential for dialup > service. > Responses from Discuss@xxxxxxxxxxxxx are sometimes blocked by an Internet > Provider mail filters. > So in a day, also check the Archived responses at http://www.linmodems.org > -------------------------- System information ---------------------------- > CPU=i686, > Welcome to openSUSE 11.0 (i586) - Kernel > Linux version 2.6.25.5-1.1-pae (geeko@buildhost) (gcc version 4.3.1 20080507 > (prerelease) [gcc-4_3-branch revision 135036] (SUSE Linux) ) #1 SMP > 2008-06-07 01:55:22 +0200 > scanModem update of: 2008_08_26 > > There are no blacklisted modem drivers in /etc/modprobe* files > Attached USB devices are: > ID 1d6b:0001 Linux Foundation 1.1 root hub > ID 1d6b:0001 Linux Foundation 1.1 root hub > ID 1d6b:0001 Linux Foundation 1.1 root hub > ID 1d6b:0001 Linux Foundation 1.1 root hub > ID 0951:1603 Kingston Technology Data Traveler 1GB/2GB Pen Drive > ID 1d6b:0002 Linux Foundation 2.0 root hub > > USB modems not recognized > > For candidate card in slot 01:04.0, firmware information and bootup > diagnostics are: > PCI slot PCI ID SubsystemID Name > ---------- --------- --------- -------------- > 01:04.0 14f1:2f50 14f1:207c Communication controller: > Conexant Device 2f50 > > Modem interrupt assignment and sharing: > 15: 2088 0 IO-APIC-edge ata_piix > --- Bootup diagnostics for card in PCI slot 01:04.0 ---- > > === Finished firmware and bootup diagnostics, next deducing cogent software. > === > > Predictive diagnostics for card in bus 01:04.0: > Modem chipset detected on > NAME="Communication controller: Conexant Device 2f50 " > CLASS=0780 > PCIDEV=14f1:2f50 > SUBSYS=14f1:207c > IRQ=5 > IDENT=hsfmodem > Driver=hsfmodem-drivers > > For candidate modem in: 01:04.0 > 0780 Communication controller: Conexant Device 2f50 > Primary device ID: 14f1:2f50 > Support type needed or chipset: hsfmodem > > > > For owners of a Dell PCs with Conexant HSF modems, a driver source package > with full speed enabled is available, but requires driver compiling. Read > DOCs/Conexant.txt > > Support for the 14f1:2f50 and 14f1:2215 HSF modems is projected early in > 2007 from Linuxant. > > Start at http://www.linuxant.com/drivers/hsf/downloads-license.php to find > the > hsfmodem package matching your System. For several Linux distros, there are > precompiled drivers matched to specific kernels. These have within the > FileName, > your KernelVersion: 2.6.25.5_1.1_pae > They can be found through > http://www.linuxant.com/drivers/hsf/full/downloads.php > A more precise location may be given a few paragraphs below. > If an EXACT Match with your your KernelVersion is not found, one of the > "Generic packages with source" near the bottom of the page must be used. > Downloaded packages must be moved into the Linux partition (home folder is > OK) > and unzipped with: > unzip hsf*.zip > The installation command for a .deb suffic packages is, with root/adm > permission: > dpkg -i hsf*.deb > while for .rpm suffix it is, with: > rpm -i hsf*.rpm > Start at http://www.linuxant.com/drivers/hsf/full for > eventually download of a hsfmodem-7.68.00.12full_k.???.zip package > with ??? the package type (deb, rpm, tar etc) > These packages have compiled drivers but will also compile a driver, > if there is a mismatch between the resident kernel and provided driver. > The generic hsfmodem-7.68.00.12full.tar.gz package only provides compiling > support > > Read DOCs/Conexant.txt > > Writing DOCs/Conexant.txt > > > Completed candidate modem analyses. > > The base of the UDEV device file system is: /dev/.udev > > Versions adequately match for the compiler installed: 4.3.1 > and the compiler used in kernel assembly: 4.3 > > > > Minimal compiling resources appear complete: > make utility - /usr/bin/make > Compiler version 4.3 > linuc_headers base folder /lib/modules/2.6.25.5-1.1-pae/build > > However some compilations and executable functions may need additional > files, > in the FileNames.h (so called kernel "h"eaders) collection installed in > /usr/include/ . > For martian_modem, additional required packages are needed. The also > required headers of package libc6 are commonly installed by default. > Compiling hsfmodem drivers does require linux-libc-dev and libc6-dev > packages, for kernels 2.6.24 and later versions. > In not included on your install CD, search for them at > http://packages.ubuntu.com > or comparable Repository for other Linux distros. > When compiling ALSA drivers, the utility "patch" will also be needed. > > > > > If a driver compilation fails, with message including some lack of some > FileName.h (stdio.h for example), then > Some additional kernel-header files need installation to /usr/include. The > minimal additional packages are libc6-dev > and any of its dependents, under Ubuntu linux-libc-dev > > If an alternate ethernet connection is available, > $ apt-get update > $ apt-get -s install linux-kernel-devel > will install needed packages. > For Debian/Ubuntu related distributions, run the following command to > display the needed package list: > > Otherwise packages have to be found through http://packages.ubuntu.com > Once downloaded and transferred into a Linux partition, > they can be installed alltogether with: > $ sudo dpkg -i *.deb > > > Checking pppd properties: > -rwxr-xr-x 1 root dialout 304644 2008-06-07 01:51 /usr/sbin/pppd > > In case of an "error 17" "serial loopback" problem, see: > http://linmodems.technion.ac.il/linmodems/archive-sixth/msg02637.html > > To enable dialout without Root permission do: > $ su - root (not for Ubuntu) > chmod a+x /usr/sbin/pppd > or under Ubuntu related Linuxes > chmod a+x /usr/sbin/pppd > > Checking settings of: /etc/ppp/options > noipdefault > noauth > crtscts > lock > modem > asyncmap 0 > nodetach > lcp-echo-interval 30 > lcp-echo-failure 4 > lcp-max-configure 60 > lcp-restart 2 > idle 600 > noipx > file /etc/ppp/filters > > In case of a message like: > Warning: Could not modify /etc/ppp/pap-secrets: Permission denied > see http://linmodems.technion.ac.il/bigarch/archive-sixth/msg04656.html > > Read Modem/DOCs/YourSystem.txt concerning other COMM channels: eth0 > Which can interfere with Browser naviagation. > > Don't worry about the following, it is for experts should trouble shooting > be necessary. > ========================================================== > > Checking for modem support lines: > -------------------------------------- > /device/modem symbolic link: > slmodemd created symbolic link /dev/ttySL0: > Within /etc/udev/ files: > /etc/udev/rules.d/77-network.rules:SUBSYSTEM=="net", > ENV{INTERFACE}=="ppp*|ippp*|isdn*|plip*|lo*|irda*|dummy*|ipsec*|tun*|tap*|bond*|vlan*|modem*|dsl*", > GOTO="skip_ifup" > /etc/udev/rules.d/50-udev-default.rules:KERNEL=="mwave", > NAME="modems/mwave", GROUP="uucp" > Within /etc/modprobe.conf files: > /etc/modprobe.conf:# Linux ACP modem (Mwave) > Within any ancient /etc/devfs files: > > Within ancient kernel 2.4.n /etc/module.conf files: > > --------- end modem support lines -------- > > > > Only plain text email is forwarded by the Discuss@xxxxxxxxxxxxx List > Server, > as HTML can contain viruses. Use as the email Subject Line: > YourName, YourCountry > Welcome to openSUSE 11.0 (i586) - Kernel kernel 2.6.25.5-1.1-pae > With this Subject Line cogent experts will be alerted, and useful case > names left in the Archive. > YourCountry will enable Country specific guidance. Linux experts in > YourCountry > can be found through: http://www.linux.org/groups/index.html. > They will know your Country's modem code, which may be essential for dialup > service. > Responses from Discuss@xxxxxxxxxxxxx are sometimes blocked by an Internet > Provider mail filters. > So in a day, also check the Archived responses at http://www.linmodems.org > -------------------------- System information ---------------------------- > CPU=i686, > Welcome to openSUSE 11.0 (i586) - Kernel > Linux version 2.6.25.5-1.1-pae (geeko@buildhost) (gcc version 4.3.1 20080507 > (prerelease) [gcc-4_3-branch revision 135036] (SUSE Linux) ) #1 SMP > 2008-06-07 01:55:22 +0200 > scanModem update of: 2008_08_26 > > There are no blacklisted modem drivers in /etc/modprobe* files > Attached USB devices are: > ID 1d6b:0001 Linux Foundation 1.1 root hub > ID 1d6b:0001 Linux Foundation 1.1 root hub > ID 0951:1603 Kingston Technology Data Traveler 1GB/2GB Pen Drive > ID 1d6b:0002 Linux Foundation 2.0 root hub > > USB modems not recognized > > For candidate card in slot 00:0c.0, firmware information and bootup > diagnostics are: > PCI slot PCI ID SubsystemID Name > ---------- --------- --------- -------------- > 00:0c.0 14f1:2f12 16ec:2016 Communication controller: > Conexant Device 2f12 > > Modem interrupt assignment and sharing: > 15: 0 0 IO-APIC-edge pata_sis > --- Bootup diagnostics for card in PCI slot 00:0c.0 ---- > > For candidate card in slot 00:0f.0, firmware information and bootup > diagnostics are: > PCI slot PCI ID SubsystemID Name > ---------- --------- --------- -------------- > 00:0f.0 1039:7502 105b:0c6d Audio device: Silicon > Integrated Systems [SiS] Azalia Audio Controller > > Modem interrupt assignment and sharing: > 18: 0 595 IO-APIC-fasteoi HDA Intel > --- Bootup diagnostics for card in PCI slot 00:0f.0 ---- > ACPI: PCI Interrupt 0000:00:0f.0[A] -> GSI 18 (level, low) -> IRQ 18 > PCI: Setting latency timer of device 0000:00:0f.0 to 64 > > > ===== Advanced Linux Sound Architecture (ALSA) diagnostics ===== > The ALSA packages provide audio support and also drivers for some modems. > ALSA diagnostics are written during bootup to /proc/asound/ folders. > > The ALSA verion is 1.0.17 > The modem cards detected by "aplay -l" are: None > > > The /proc/asound/pcm file reports: > ----------------------- > 00-01: ALC662 Digital : ALC662 Digital : playback 1 > 00-00: ALC662 Analog : ALC662 Analog : playback 1 : capture 1 > > about /proc/asound/cards: > ------------------------ > 0 [SIS966 ]: HDA-Intel - HDA SIS966 > HDA SIS966 at 0xdfff8000 irq 18 > > PCI slot 00:0f.0 has a High Definition Audio Card > The drivers are in the kernel modules tree at: > /lib/modules/2.6.25.5-1.1-pae/kernel/sound/pci/hda/snd-hda-intel.ko > === Finished firmware and bootup diagnostics, next deducing cogent software. > === > > Predictive diagnostics for card in bus 00:0c.0: > Modem chipset detected on > NAME="Communication controller: Conexant Device 2f12 " > CLASS=0780 > PCIDEV=14f1:2f12 > SUBSYS=16ec:2016 > IRQ=15 > IDENT=hsfmodem > Driver=hsfmodem-drivers > > For candidate modem in: 00:0c.0 > 0780 Communication controller: Conexant Device 2f12 > Primary device ID: 14f1:2f12 > Support type needed or chipset: hsfmodem > > > > For owners of a Dell PCs with Conexant HSF modems, a driver source package > with full speed enabled is available, but requires driver compiling. Read > DOCs/Conexant.txt > > > Start at http://www.linuxant.com/drivers/hsf/downloads-license.php to find > the > hsfmodem package matching your System. For several Linux distros, there are > precompiled drivers matched to specific kernels. These have within the > FileName, > your KernelVersion: 2.6.25.5_1.1_pae > They can be found through > http://www.linuxant.com/drivers/hsf/full/downloads.php > A more precise location may be given a few paragraphs below. > If an EXACT Match with your your KernelVersion is not found, one of the > "Generic packages with source" near the bottom of the page must be used. > Downloaded packages must be moved into the Linux partition (home folder is > OK) > and unzipped with: > unzip hsf*.zip > The installation command for a .deb suffic packages is, with root/adm > permission: > dpkg -i hsf*.deb > while for .rpm suffix it is, with: > rpm -i hsf*.rpm > Start at http://www.linuxant.com/drivers/hsf/full for > eventually download of a hsfmodem-7.68.00.12full_k.???.zip package > with ??? the package type (deb, rpm, tar etc) > These packages have compiled drivers but will also compile a driver, > if there is a mismatch between the resident kernel and provided driver. > The generic hsfmodem-7.68.00.12full.tar.gz package only provides compiling > support > > Read DOCs/Conexant.txt > > Writing DOCs/Conexant.txt > > > > Predictive diagnostics for card in bus 00:0f.0: > Modem chipset not detected on > NAME="Audio device: Silicon Integrated Systems [SiS] Azalia Audio > Controller" > CLASS=0403 > PCIDEV=1039:7502 > SUBSYS=105b:0c6d > IRQ=18 > HDA=1039:7502 > SOFT=1039:7502.HDA > > > High Definition Audio (HDA) cards MAY host a modem chip in their Subsystem, > and many are supported by the ALSA audio+modem driver snd-hda-intel > A modem was not detected on HDA card 1039:7502. > If another modem card is present, then most likely 1039:7502 does not host > a modem. > If another modem card has not been detected, then possibilities are: > 1) A Conexant modem chip is present on 1039:7502, as Conexant chips > are frequently not detectable by ALSA diagnostics > 2) The modem may be of the older non-PCI Controller Chipset > (hardware) type. > Try detection with Root permission: > wvdialconf /etc/wvdial.conf > > For candidate modem in: 00:0f.0 > 0403 Audio device: Silicon Integrated Systems [SiS] Azalia Audio > Controller > Primary device ID: 1039:7502 > Subsystem PCI_id 105b:0c6d > Softmodem codec or chipset from diagnostics: > from Archives: > > > > Support type needed or chipset: > > Support can likely be achieved through two mutually exclusive alternatives: > 1) The hsfmodem software for Conexant chipset modems: Read DOCs/Conexant.txt > The following ALSA alternative CANNOT work with Conexant modems. > > 2) An ALSA modem driver plus slmodemd. Read DOCs/Smartlink.txt for details, > and > to test get the package SLMODEMD.gcc4.3.tar.gz from: > http://linmodems.technion.ac.il/packages/smartlink/ > > ----------------end Softmodem section -------------- > Writing DOCs/Smartlink.txt > ============ end Smartlink section ===================== > > Completed candidate modem analyses. > > The base of the UDEV device file system is: /dev/.udev > > Versions adequately match for the compiler installed: 4.3.1 > and the compiler used in kernel assembly: 4.3 > > > > Minimal compiling resources appear complete: > make utility - /usr/bin/make > Compiler version 4.3 > linuc_headers base folder /lib/modules/2.6.25.5-1.1-pae/build > > However some compilations and executable functions may need additional > files, > in the FileNames.h (so called kernel "h"eaders) collection installed in > /usr/include/ . > For martian_modem, additional required packages are needed. The also > required headers of package libc6 are commonly installed by default. > Compiling hsfmodem drivers does require linux-libc-dev and libc6-dev > packages, for kernels 2.6.24 and later versions. > In not included on your install CD, search for them at > http://packages.ubuntu.com > or comparable Repository for other Linux distros. > When compiling ALSA drivers, the utility "patch" will also be needed. > > > > > If a driver compilation fails, with message including some lack of some > FileName.h (stdio.h for example), then > Some additional kernel-header files need installation to /usr/include. The > minimal additional packages are libc6-dev > and any of its dependents, under Ubuntu linux-libc-dev > > If an alternate ethernet connection is available, > $ apt-get update > $ apt-get -s install linux-kernel-devel > will install needed packages. > For Debian/Ubuntu related distributions, run the following command to > display the needed package list: > > Otherwise packages have to be found through http://packages.ubuntu.com > Once downloaded and transferred into a Linux partition, > they can be installed alltogether with: > $ sudo dpkg -i *.deb > > > Checking pppd properties: > -rwxr-xr-x 1 root dialout 304644 2008-06-07 01:51 /usr/sbin/pppd > > In case of an "error 17" "serial loopback" problem, see: > http://linmodems.technion.ac.il/linmodems/archive-sixth/msg02637.html > > To enable dialout without Root permission do: > $ su - root (not for Ubuntu) > chmod a+x /usr/sbin/pppd > or under Ubuntu related Linuxes > chmod a+x /usr/sbin/pppd > > Checking settings of: /etc/ppp/options > noipdefault > noauth > crtscts > lock > modem > asyncmap 0 > nodetach > lcp-echo-interval 30 > lcp-echo-failure 4 > lcp-max-configure 60 > lcp-restart 2 > idle 600 > noipx > file /etc/ppp/filters > > In case of a message like: > Warning: Could not modify /etc/ppp/pap-secrets: Permission denied > see http://linmodems.technion.ac.il/bigarch/archive-sixth/msg04656.html > > Read Modem/DOCs/YourSystem.txt concerning other COMM channels: eth0 > Which can interfere with Browser naviagation. > > Don't worry about the following, it is for experts should trouble shooting > be necessary. > ========================================================== > > Checking for modem support lines: > -------------------------------------- > /device/modem symbolic link: > slmodemd created symbolic link /dev/ttySL0: > Within /etc/udev/ files: > /etc/udev/rules.d/77-network.rules:SUBSYSTEM=="net", > ENV{INTERFACE}=="ppp*|ippp*|isdn*|plip*|lo*|irda*|dummy*|ipsec*|tun*|tap*|bond*|vlan*|modem*|dsl*", > GOTO="skip_ifup" > /etc/udev/rules.d/50-udev-default.rules:KERNEL=="mwave", > NAME="modems/mwave", GROUP="uucp" > Within /etc/modprobe.conf files: > /etc/modprobe.conf:# Linux ACP modem (Mwave) > Within any ancient /etc/devfs files: > > Within ancient kernel 2.4.n /etc/module.conf files: > > --------- end modem support lines -------- > > >
