Hi Marv,
i plugged the new modem and i sent you the ModemDatetxtfile.
By the way, should i uninstall the previous driver or what? If i have to, how can i do that plz?
Thanks.
Only plain text email is forwarded by the Discuss@xxxxxxxxxxxxx List Server,
as HTML can contain viruses. Use as the email Subject Line:
YourName, YourCountry kernel 2.6.24-19-generic
With this Subject Line cogent experts will be alerted, and useful case names left in the Archive.
YourCountry will enable Country specific guidance. Linux experts in YourCountry
can be found through: http://www.linux.org/groups/index.html.
They will know your Country's modem code, which may be essential for dialup service.
Responses from Discuss@xxxxxxxxxxxxx are sometimes blocked by an Internet Provider mail filters.
So in a day, also check the Archived responses at http://www.linmodems.org
-------------------------- System information ----------------------------
CPU=i686,
Linux version 2.6.24-19-generic (buildd@palmer) (gcc version 4.2.3 (Ubuntu 4.2.3-2ubuntu7)) #1 SMP Wed Jun 18 14:43:41 UTC 2008
scanModem update of: 2008_07_12
There are no blacklisted modem drivers in /etc/modprobe* files
Attached USB devices are:
ID 09da:000a A4 Tech Co., Ltd
USB modems not recognized
For candidate card in slot 05:01.0, firmware information and bootup diagnostics are:
PCI slot PCI ID SubsystemID Name
---------- --------- --------- --------------
05:01.0 1057:3052 1057:3020 Modem: Motorola SM56 Data Fax Modem
Modem interrupt assignment and sharing:
20: 607 0 IO-APIC-fasteoi uhci_hcd:usb1, HDA Intel
--- Bootup diagnostics for card in PCI slot 05:01.0 ----
[ 26.527870] ACPI: PCI Interrupt 0000:05:01.0[A] -> GSI 22 (level, low) -> IRQ 20
[ 26.528137] 0000:05:01.0: ttyS1 at I/O 0xe808 (irq = 20) is a 16450
[ 26.528307] 0000:05:01.0: ttyS2 at I/O 0xe810 (irq = 20) is a 8250
[ 26.528469] 0000:05:01.0: ttyS3 at I/O 0xe818 (irq = 20) is a 16450
[ 26.528531] Couldn't register serial port 0000:05:01.0: -28
For candidate card in slot 00:1b.0, firmware information and bootup diagnostics are:
PCI slot PCI ID SubsystemID Name
---------- --------- --------- --------------
00:1b.0 8086:284b 1043:8290 Audio device: Intel Corporation 82801H
Modem interrupt assignment and sharing:
20: 607 0 IO-APIC-fasteoi uhci_hcd:usb1, HDA Intel
--- Bootup diagnostics for card in PCI slot 00:1b.0 ----
[ 42.813643] ACPI: PCI Interrupt 0000:00:1b.0[A] -> GSI 22 (level, low) -> IRQ 20
[ 42.813662] PCI: Setting latency timer of device 0000:00:1b.0 to 64
===== Advanced Linux Sound Architecture (ALSA) diagnostics =====
The ALSA packages provide audio support and also drivers for some modems.
ALSA diagnostics are written during bootup to /proc/asound/ folders.
PCI slot 00:1b.0 has a High Definition Audio Card
The drivers are in the kernel modules tree at:
/lib/modules/2.6.24-19-generic/ubuntu/sound/alsa-driver/pci/hda/snd-hda-intel.ko
The ALSA verion is 1.0.15
The modem cards detected by "aplay -l" are: None
The /proc/asound/pcm file reports:
-----------------------
00-01: ALC662 Digital : ALC662 Digital : playback 1
00-00: ALC662 Analog : ALC662 Analog : playback 1 : capture 2
about /proc/asound/cards:
------------------------
0 [Intel ]: HDA-Intel - HDA Intel
HDA Intel at 0xebff8000 irq 20
=== Finished firmware and bootup diagnostics, next deducing cogent software. ===
Predictive diagnostics for card in bus 05:01.0:
Modem chipset detected on
NAME="Modem: Motorola SM56 Data Fax Modem "
CLASS=0703
PCIDEV=1057:3052
SUBSYS=1057:3020
IRQ=20
IDENT=slamr
For candidate modem in: 05:01.0
0703 Modem: Motorola SM56 Data Fax Modem
Primary device ID: 1057:3052
Support type needed or chipset: slamr
----------------end Softmodem section --------------
Writing DOCs/Intel.txt
1057:3052 has a Motorola chipset, poorly supported by Motorola itself
However Zello discovered that drivers written to support Smartlink modems do support the 1057:3052 chipset!!
It sufficed to add 1057:3052 to the list of modem cards recognized by the Smartlink slamr driver.
There is a ungrab-winmodem driver used in conjunction with slamr, which must have 1057:3052
similarly added. See messages from Zello:
http://linmodems.technion.ac.il/bigarch/archive-seventh/msg00846.html
http://linmodems.technion.ac.il/bigarch/archive-seventh/msg00848.html
and Alvaro Aguirre about the ungrab-winmodem fix:
http://linmodems.technion.ac.il/bigarch/archive-seventh/msg00990.html
For general guidance on ungrab-winmodem + slamr usage, read the DOCs/Smartlink.txt
The modem is supported by the Smartlink
plus the slmodemd helper utility. Read the
DOCs/Smartlink.txt and Modem/DOCs/YourSystem.txt for follow through guidance.
For 2.6.24-19-generic compiling drivers is necessary. As of October 2007 the current packages at
http://linmodems.technion.ac.il/packages/smartlink/ are the
ungrab-winmodem-20070505.tar.gz and slmodem-2.9.11-20080126.tar.gz
Writing DOCs/Smartlink.txt
============ end Smartlink section =====================
Predictive diagnostics for card in bus 00:1b.0:
Modem chipset not detected on
NAME="Audio device: Intel Corporation 82801H "
CLASS=0403
PCIDEV=8086:284b
SUBSYS=1043:8290
IRQ=20
HDA=8086:284b
SOFT=8086:284b.HDA
High Definition Audio (HDA) cards MAY host a modem chip in their Subsystem,
and many are supported by the ALSA audio+modem driver snd-hda-intel
A modem was not detected on HDA card 8086:284b.
If another modem card is present, then most likely 8086:284b does not host a modem.
If another modem card has not been detected, then possibilities are:
1) A Conexant modem chip is present on 8086:284b, as Conexant chips
are frequently not detectable by ALSA diagnostics
2) The modem may be of the older non-PCI Controller Chipset (hardware) type.
Try detection with Root permission:
sudo wvdialconf /etc/wvdial.conf
For candidate modem in: 00:1b.0
0403 Audio device: Intel Corporation 82801H
Primary device ID: 8086:284b
Subsystem PCI_id 1043:8290
Softmodem codec or chipset from diagnostics:
from Archives:
Support type needed or chipset:
Support can likely be achieved through two mutually exclusive alternatives:
1) The hsfmodem software for Conexant chipset modems: Read DOCs/Conexant.txt
The following ALSA alternative CANNOT work with Conexant modems.
2) An ALSA modem driver plus slmodemd. Read DOCs/Smartlink.txt for details, and
to test get the package SLMODEMD.gcc4.2.tar.gz from:
http://linmodems.technion.ac.il/packages/smartlink/
----------------end Softmodem section --------------
Completed candidate modem analyses.
The base of the UDEV device file system is: /dev/.udev
Versions adequately match for the compiler installed: 4.2.3
and the compiler used in kernel assembly: 4.2.3
Minimal compiling resources appear complete:
make utility - /usr/bin/make
Compiler version 4.2
linuc_headers base folder /lib/modules/2.6.24-19-generic/build
However some compilations and executable functions may need additional files,
in the FileNames.h (so called kernel "h"eaders) collection installed in /usr/include/ .
For martian_modem, additional required packages are n. The also required headers of package libc6 are commonly installed by default.
Compiling hsfmodem drivers does require linux-libc-dev and libc6-dev packages, for kernels 2.6.24 and later versions.
In not included on your install CD, search for them at http://packages.ubuntu.com
or comparable Repository for other Linux distros.
When compiling ALSA drivers, the utility "patch" will also be needed.
If a driver compilation fails, with message including some lack of some FileName.h (stdio.h for example), then
Some additional kernel-header files need installation to /usr/include. The minimal additional packages are libc6-dev
and any of its dependents, under Ubuntu linux-libc-dev
If an alternate ethernet connection is available,
$ apt-get update
$ apt-get -s install linux-kernel-devel
will install needed packages.
For Debian/Ubuntu related distributions, run the following command to display the needed package list:
Otherwise packages have to be found through http://packages.ubuntu.com
Once downloaded and transferred into a Linux partition,
they can be installed alltogether with:
$ sudo dpkg -i *.deb
Checking pppd properties:
-rwsr-xr-- 1 root dip 269256 2007-10-04 22:57 /usr/sbin/pppd
In case of an "error 17" "serial loopback" problem, see:
http://linmodems.technion.ac.il/linmodems/archive-sixth/msg02637.html
To enable dialout without Root permission do:
$ su - root (not for Ubuntu)
sudo chmod a+x /usr/sbin/pppd
or under Ubuntu related Linuxes
sudo chmod a+x /usr/sbin/pppd
Checking settings of: /etc/ppp/options
asyncmap 0
noauth
crtscts
lock
hide-password
modem
proxyarp
lcp-echo-interval 30
lcp-echo-failure 4
noipx
In case of a message like:
Warning: Could not modify /etc/ppp/pap-secrets: Permission denied
see http://linmodems.technion.ac.il/bigarch/archive-sixth/msg04656.html
Read Modem/DOCs/YourSystem.txt concerning other COMM channels: ath0 eth0 wifi0
Which can interfere with Browser naviagation.
Don't worry about the following, it is for experts should trouble shooting be necessary.
==========================================================
Checking for modem support lines:
--------------------------------------
/device/modem symbolic link:
slmodemd created symbolic link /dev/ttySL0:
Within /etc/udev/ files:
Within /etc/modprobe.conf files:
/etc/modprobe.d/alsa-base:options snd-atiixp-modem index=-2
/etc/modprobe.d/alsa-base:options snd-via82xx-modem index=-2
/etc/modprobe.d/blacklist-modem:# Uncomment these entries in order to blacklist unwanted modem drivers
/etc/modprobe.d/blacklist-modem:# blacklist snd-atiixp-modem
/etc/modprobe.d/blacklist-modem:# blacklist snd-via82xx-modem
Within any ancient /etc/devfs files:
Within ancient kernel 2.4.n /etc/module.conf files:
--------- end modem support lines --------
