"with Attatcment"
Marv,
i sent you rocky.txt file in this email.
All the best.
----- Original Message ----
From: Marvin Stodolsky <marvin.stodolsky@xxxxxxxxx>
To: Rocky Rock <xubuntu@xxxxxxxxx>
Cc: discuss@xxxxxxxxxxxxx
Sent: Tuesday, August 12, 2008 3:10:44 PM
Subject: Re: Genius GM56PCI-SA PCI modem
Rocky,
Don't plain Ubuntu (or any Distro) when using a driver with a Closed
Source component
RE: "HERE THE COMPUTER always GETS FROZEN!"
To start checking for a resource conflict, do:
$ lsmod >> rocky.txt
$ dmesg >> rocky.txt
and send to the List.
MarvS
On Tue, Aug 12, 2008 at 10:13 AM, Rocky Rock <xubuntu@xxxxxxxxx> wrote:
> Hi Marv,
> Yes i did followed all instructions in agrsm_howto.txt. I get errors in step 3, the computer in this step gets frozen! Imagine Ubuntu "LINXU" got frozen! Where is the robustness???!!!
>
> Attatchments in this email are:
> 1- Terminal.txt: This file contains the commands that i used in the terminal and the output. Please check them for me to see if there are errors or "mistakes".
> 2-ModemData.txt: I attatched this file again to allow you to check it for more info.
>
> I have Ubuntu 8.04.1
>
> If this modem doesn't work i have another pci modem, i think with motoroal chip.
>
> Regards.
>
>
>> ----- Original Message ----
>> From: Marvin Stodolsky <marvin.stodolsky@xxxxxxxxx>
>> To: Rocky Rock <xubuntu@xxxxxxxxx>
>> Cc: discuss@xxxxxxxxxxxxx
>
> Rocky,
>
> Have you followed the procedures in the agrsm_howto.txt, starting at 1)
> We need details of the error reports.
>
> MarvS
>
> On Fri, Aug 8, 2008 at 6:45 AM, Rocky Rock <xubuntu@xxxxxxxxx> wrote:
>> hi Marv, ok so now what should i do??? Do i have any chance to get my modem works?
>>
>> Thanks in advance.
>>
>>
>>
>
>
>
Module Size Used by
ipv6 267780 10
rfcomm 41744 2
l2cap 25728 13 rfcomm
bluetooth 61156 4 rfcomm,l2cap
ppdev 10372 0
acpi_cpufreq 10796 1
cpufreq_userspace 5284 0
cpufreq_stats 7104 0
cpufreq_powersave 2688 0
cpufreq_conservative 8712 0
cpufreq_ondemand 9740 1
freq_table 5536 3 acpi_cpufreq,cpufreq_stats,cpufreq_ondemand
container 5632 0
video 19856 0
output 4736 1 video
dock 11280 0
sbs 15112 0
sbshc 7680 1 sbs
battery 14212 0
iptable_filter 3840 0
ip_tables 14820 1 iptable_filter
x_tables 16132 1 ip_tables
ac 6916 0
lp 12324 0
stv0299 11528 1
wlan_scan_sta 14720 1
ath_rate_sample 14336 1
parport_pc 36260 1
parport 37832 3 ppdev,lp,parport_pc
evdev 13056 3
snd_hda_intel 295456 3
sr_mod 17956 0
cdrom 37408 1 sr_mod
usbhid 31872 0
snd_pcm_oss 42144 0
snd_mixer_oss 17920 1 snd_pcm_oss
pcspkr 4224 0
b2c2_flexcop_pci 9368 0
b2c2_flexcop 27660 1 b2c2_flexcop_pci
dvb_core 81404 2 stv0299,b2c2_flexcop
snd_pcm 78596 2 snd_hda_intel,snd_pcm_oss
hid 38784 1 usbhid
ath_pci 101024 0
wlan 207728 4 wlan_scan_sta,ath_rate_sample,ath_pci
ath_hal 192592 3 ath_rate_sample,ath_pci
atl1 36364 0
snd_page_alloc 11400 2 snd_hda_intel,snd_pcm
snd_hwdep 10500 1 snd_hda_intel
mii 6400 1 atl1
snd_seq_dummy 4868 0
i2c_core 24832 2 stv0299,b2c2_flexcop
snd_seq_oss 35584 0
snd_seq_midi 9376 0
snd_rawmidi 25760 1 snd_seq_midi
snd_seq_midi_event 8320 2 snd_seq_oss,snd_seq_midi
snd_seq 54224 6 snd_seq_dummy,snd_seq_oss,snd_seq_midi,snd_seq_midi_event
snd_timer 24836 2 snd_pcm,snd_seq
button 9232 0
snd_seq_device 9612 5 snd_seq_dummy,snd_seq_oss,snd_seq_midi,snd_rawmidi,snd_seq
snd 56996 17 snd_hda_intel,snd_pcm_oss,snd_mixer_oss,snd_pcm,snd_hwdep,snd_seq_dummy,snd_seq_oss,snd_rawmidi,snd_seq,snd_timer,snd_seq_device
iTCO_wdt 13092 0
iTCO_vendor_support 4868 1 iTCO_wdt
intel_agp 25492 0
soundcore 8800 1 snd
agpgart 34760 1 intel_agp
shpchp 34452 0
pci_hotplug 30880 1 shpchp
usb_storage 73664 2
ext3 136712 1
jbd 48404 1 ext3
mbcache 9600 1 ext3
libusual 19108 1 usb_storage
sg 36880 0
sd_mod 30720 4
pata_jmicron 7040 0
pata_acpi 8320 0
ata_generic 8324 0
ata_piix 19588 2
ahci 28420 0
libata 159344 5 pata_jmicron,pata_acpi,ata_generic,ata_piix,ahci
scsi_mod 151436 5 sr_mod,usb_storage,sg,sd_mod,libata
ehci_hcd 37900 0
uhci_hcd 27024 0
usbcore 146028 6 usbhid,usb_storage,libusual,ehci_hcd,uhci_hcd
thermal 16796 0
processor 36872 2 acpi_cpufreq,thermal
fan 5636 0
fbcon 42912 0
tileblit 3456 1 fbcon
font 9472 1 fbcon
bitblit 6784 1 fbcon
softcursor 3072 1 bitblit
fuse 50580 5
[ 0.000000] Initializing cgroup subsys cpuset
[ 0.000000] Initializing cgroup subsys cpu
[ 0.000000] Linux version 2.6.24-19-generic (buildd@palmer) (gcc version 4.2.3 (Ubuntu 4.2.3-2ubuntu7)) #1 SMP Wed Jun 18 14:43:41 UTC 2008 (Ubuntu 2.6.24-19.34-generic)
[ 0.000000] BIOS-provided physical RAM map:
[ 0.000000] BIOS-e820: 0000000000000000 - 000000000009fc00 (usable)
[ 0.000000] BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved)
[ 0.000000] BIOS-e820: 00000000000e4000 - 0000000000100000 (reserved)
[ 0.000000] BIOS-e820: 0000000000100000 - 000000007ffa0000 (usable)
[ 0.000000] BIOS-e820: 000000007ffa0000 - 000000007ffae000 (ACPI data)
[ 0.000000] BIOS-e820: 000000007ffae000 - 000000007ffe0000 (ACPI NVS)
[ 0.000000] BIOS-e820: 000000007ffe0000 - 0000000080000000 (reserved)
[ 0.000000] BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved)
[ 0.000000] BIOS-e820: 00000000fff00000 - 0000000100000000 (reserved)
[ 0.000000] 1151MB HIGHMEM available.
[ 0.000000] 896MB LOWMEM available.
[ 0.000000] found SMP MP-table at 000ff780
[ 0.000000] Entering add_active_range(0, 0, 524192) 0 entries of 256 used
[ 0.000000] Zone PFN ranges:
[ 0.000000] DMA 0 -> 4096
[ 0.000000] Normal 4096 -> 229376
[ 0.000000] HighMem 229376 -> 524192
[ 0.000000] Movable zone start PFN for each node
[ 0.000000] early_node_map[1] active PFN ranges
[ 0.000000] 0: 0 -> 524192
[ 0.000000] On node 0 totalpages: 524192
[ 0.000000] DMA zone: 32 pages used for memmap
[ 0.000000] DMA zone: 0 pages reserved
[ 0.000000] DMA zone: 4064 pages, LIFO batch:0
[ 0.000000] Normal zone: 1760 pages used for memmap
[ 0.000000] Normal zone: 223520 pages, LIFO batch:31
[ 0.000000] HighMem zone: 2303 pages used for memmap
[ 0.000000] HighMem zone: 292513 pages, LIFO batch:31
[ 0.000000] Movable zone: 0 pages used for memmap
[ 0.000000] DMI present.
[ 0.000000] ACPI: RSDP signature @ 0xC00FB840 checksum 0
[ 0.000000] ACPI: RSDP 000FB840, 0014 (r0 ACPIAM)
[ 0.000000] ACPI: RSDT 7FFA0000, 0034 (r1 072507 RSDT1440 20070725 MSFT 97)
[ 0.000000] ACPI: FACP 7FFA0200, 0084 (r2 072507 FACP1440 20070725 MSFT 97)
[ 0.000000] ACPI: DSDT 7FFA0440, 85DF (r1 A0731 A0731000 0 INTL 20060113)
[ 0.000000] ACPI: FACS 7FFAE000, 0040
[ 0.000000] ACPI: APIC 7FFA0390, 006C (r1 072507 APIC1440 20070725 MSFT 97)
[ 0.000000] ACPI: MCFG 7FFA0400, 003C (r1 072507 OEMMCFG 20070725 MSFT 97)
[ 0.000000] ACPI: OEMB 7FFAE040, 0071 (r1 072507 OEMB1440 20070725 MSFT 97)
[ 0.000000] ACPI: PM-Timer IO Port: 0x808
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled)
[ 0.000000] Processor #0 15:6 APIC version 20
[ 0.000000] ACPI: LAPIC (acpi_id[0x02] lapic_id[0x01] enabled)
[ 0.000000] Processor #1 15:6 APIC version 20
[ 0.000000] ACPI: LAPIC (acpi_id[0x03] lapic_id[0x82] disabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x04] lapic_id[0x83] disabled)
[ 0.000000] ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0])
[ 0.000000] IOAPIC[0]: apic_id 2, version 32, address 0xfec00000, GSI 0-23
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
[ 0.000000] ACPI: IRQ0 used by override.
[ 0.000000] ACPI: IRQ2 used by override.
[ 0.000000] ACPI: IRQ9 used by override.
[ 0.000000] Enabling APIC mode: Flat. Using 1 I/O APICs
[ 0.000000] Using ACPI (MADT) for SMP configuration information
[ 0.000000] Allocating PCI resources starting at 88000000 (gap: 80000000:7ee00000)
[ 0.000000] swsusp: Registered nosave memory region: 000000000009f000 - 00000000000a0000
[ 0.000000] swsusp: Registered nosave memory region: 00000000000a0000 - 00000000000e4000
[ 0.000000] swsusp: Registered nosave memory region: 00000000000e4000 - 0000000000100000
[ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 520097
[ 0.000000] Kernel command line: root=UUID=28d7dc3f-268d-44fd-8f0e-bcaa0f976d44 ro quiet splash
[ 0.000000] mapped APIC to ffffb000 (fee00000)
[ 0.000000] mapped IOAPIC to ffffa000 (fec00000)
[ 0.000000] Enabling fast FPU save and restore... done.
[ 0.000000] Enabling unmasked SIMD FPU exception support... done.
[ 0.000000] Initializing CPU#0
[ 0.000000] PID hash table entries: 4096 (order: 12, 16384 bytes)
[ 0.000000] Detected 3600.134 MHz processor.
[ 19.540054] Console: colour VGA+ 80x25
[ 19.540057] console [tty0] enabled
[ 19.540329] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
[ 19.540611] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
[ 19.637285] Memory: 2066432k/2096768k available (2177k kernel code, 29072k reserved, 1006k data, 368k init, 1179264k highmem)
[ 19.637292] virtual kernel memory layout:
[ 19.637293] fixmap : 0xfff4b000 - 0xfffff000 ( 720 kB)
[ 19.637294] pkmap : 0xff800000 - 0xffc00000 (4096 kB)
[ 19.637294] vmalloc : 0xf8800000 - 0xff7fe000 ( 111 MB)
[ 19.637295] lowmem : 0xc0000000 - 0xf8000000 ( 896 MB)
[ 19.637296] .init : 0xc0421000 - 0xc047d000 ( 368 kB)
[ 19.637297] .data : 0xc0320434 - 0xc041bdc4 (1006 kB)
[ 19.637298] .text : 0xc0100000 - 0xc0320434 (2177 kB)
[ 19.637300] Checking if this processor honours the WP bit even in supervisor mode... Ok.
[ 19.637334] SLUB: Genslabs=11, HWalign=64, Order=0-1, MinObjects=4, CPUs=2, Nodes=1
[ 19.717233] Calibrating delay using timer specific routine.. 7206.52 BogoMIPS (lpj=14413053)
[ 19.717255] Security Framework initialized
[ 19.717260] SELinux: Disabled at boot.
[ 19.717271] AppArmor: AppArmor initialized
[ 19.717275] Failure registering capabilities with primary security module.
[ 19.717282] Mount-cache hash table entries: 512
[ 19.717387] Initializing cgroup subsys ns
[ 19.717391] Initializing cgroup subsys cpuacct
[ 19.717402] CPU: After generic identify, caps: bfebfbff 20100000 00000000 00000000 0000e59d 00000000 00000001 00000000
[ 19.717410] monitor/mwait feature present.
[ 19.717411] using mwait in idle threads.
[ 19.717416] CPU: Trace cache: 12K uops, L1 D cache: 16K
[ 19.717418] CPU: L2 cache: 2048K
[ 19.717421] CPU: Physical Processor ID: 0
[ 19.717422] CPU: After all inits, caps: bfebfbff 20100000 00000000 0000b180 0000e59d 00000000 00000001 00000000
[ 19.717431] Compat vDSO mapped to ffffe000.
[ 19.717445] Checking 'hlt' instruction... OK.
[ 19.733614] SMP alternatives: switching to UP code
[ 19.735179] Early unpacking initramfs... done
[ 19.993510] ACPI: Core revision 20070126
[ 19.993565] ACPI: Looking for DSDT in initramfs... error, file /DSDT.aml not found.
[ 20.032307] CPU0: Intel(R) Pentium(R) 4 CPU 3.60GHz stepping 04
[ 20.032323] SMP alternatives: switching to SMP code
[ 20.032973] Booting processor 1/1 eip 3000
[ 20.043277] Initializing CPU#1
[ 20.120618] Calibrating delay using timer specific routine.. 7200.45 BogoMIPS (lpj=14400900)
[ 20.120626] CPU: After generic identify, caps: bfebfbff 20100000 00000000 00000000 0000e59d 00000000 00000001 00000000
[ 20.120633] monitor/mwait feature present.
[ 20.120638] CPU: Trace cache: 12K uops, L1 D cache: 16K
[ 20.120641] CPU: L2 cache: 2048K
[ 20.120643] CPU: Physical Processor ID: 0
[ 20.120645] CPU: After all inits, caps: bfebfbff 20100000 00000000 0000b180 0000e59d 00000000 00000001 00000000
[ 20.121128] CPU1: Intel(R) Pentium(R) 4 CPU 3.60GHz stepping 04
[ 20.121163] Total of 2 processors activated (14406.97 BogoMIPS).
[ 20.121305] ENABLING IO-APIC IRQs
[ 20.121471] ..TIMER: vector=0x31 apic1=0 pin1=2 apic2=-1 pin2=-1
[ 20.284372] APIC calibration not consistent with PM Timer: 116ms instead of 100ms
[ 20.284375] APIC delta adjusted to PM-Timer: 1249981 (1450071)
[ 20.284498] checking TSC synchronization [CPU#0 -> CPU#1]: passed.
[ 20.304482] Brought up 2 CPUs
[ 20.304508] CPU0 attaching sched-domain:
[ 20.304511] domain 0: span 03
[ 20.304514] groups: 01 02
[ 20.304517] domain 1: span 03
[ 20.304519] groups: 03
[ 20.304521] CPU1 attaching sched-domain:
[ 20.304523] domain 0: span 03
[ 20.304524] groups: 02 01
[ 20.304527] domain 1: span 03
[ 20.304528] groups: 03
[ 20.304763] net_namespace: 64 bytes
[ 20.304773] Booting paravirtualized kernel on bare hardware
[ 20.305262] Time: 18:46:27 Date: 08/12/08
[ 20.305288] NET: Registered protocol family 16
[ 20.305522] EISA bus registered
[ 20.305528] ACPI: bus type pci registered
[ 20.305697] PCI: PCI BIOS revision 3.00 entry at 0xf0031, last bus=5
[ 20.305699] PCI: Using configuration type 1
[ 20.305713] Setting up standard PCI resources
[ 20.310228] ACPI: EC: Look up EC in DSDT
[ 20.315550] ACPI: Interpreter enabled
[ 20.315553] ACPI: (supports S0 S1 S3 S4 S5)
[ 20.315570] ACPI: Using IOAPIC for interrupt routing
[ 20.323778] ACPI: PCI Root Bridge [PCI0] (0000:00)
[ 20.324480] PCI quirk: region 0800-087f claimed by ICH6 ACPI/GPIO/TCO
[ 20.324484] PCI quirk: region 0480-04bf claimed by ICH6 GPIO
[ 20.325473] PCI: Transparent bridge - 0000:00:1e.0
[ 20.325507] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
[ 20.325660] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P2._PRT]
[ 20.325743] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P1._PRT]
[ 20.325866] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P4._PRT]
[ 20.325949] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P6._PRT]
[ 20.326031] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P7._PRT]
[ 20.340033] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 10 *11 12 14 15)
[ 20.340150] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 *5 6 7 10 11 12 14 15)
[ 20.340267] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 7 10 11 12 14 *15)
[ 20.340389] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 7 *10 11 12 14 15)
[ 20.340526] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 *10 11 12 14 15)
[ 20.340642] ACPI: PCI Interrupt Link [LNKF] (IRQs *3 4 5 6 7 10 11 12 14 15)
[ 20.340758] ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 7 10 11 12 *14 15)
[ 20.340875] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 7 10 *11 12 14 15)
[ 20.341017] ACPI Warning (tbutils-0217): Incorrect checksum in table [OEMB] - D5, should be D0 [20070126]
[ 20.341023] Linux Plug and Play Support v0.97 (c) Adam Belay
[ 20.341059] pnp: PnP ACPI init
[ 20.341066] ACPI: bus type pnp registered
[ 20.344584] pnp: PnP ACPI: found 14 devices
[ 20.344587] ACPI: ACPI bus type pnp unregistered
[ 20.344591] PnPBIOS: Disabled by ACPI PNP
[ 20.344865] PCI: Using ACPI for IRQ routing
[ 20.344868] PCI: If a device doesn't work, try "pci=routeirq". If it helps, post a report
[ 20.380373] NET: Registered protocol family 8
[ 20.380377] NET: Registered protocol family 20
[ 20.380469] AppArmor: AppArmor Filesystem Enabled
[ 20.384244] Time: tsc clocksource has been installed.
[ 20.400400] system 00:01: iomem range 0xfed14000-0xfed19fff has been reserved
[ 20.400414] system 00:07: ioport range 0x290-0x297 has been reserved
[ 20.400421] system 00:08: ioport range 0x4d0-0x4d1 has been reserved
[ 20.400425] system 00:08: ioport range 0x800-0x87f has been reserved
[ 20.400432] system 00:08: ioport range 0x480-0x4bf has been reserved
[ 20.400434] system 00:08: iomem range 0xfed1c000-0xfed1ffff has been reserved
[ 20.400437] system 00:08: iomem range 0xfed20000-0xfed8ffff has been reserved
[ 20.400442] system 00:09: iomem range 0xfec00000-0xfec00fff has been reserved
[ 20.400444] system 00:09: iomem range 0xfee00000-0xfee00fff could not be reserved
[ 20.400451] system 00:0c: iomem range 0xf0000000-0xf3ffffff has been reserved
[ 20.400456] system 00:0d: iomem range 0x0-0x9ffff could not be reserved
[ 20.400459] system 00:0d: iomem range 0xc0000-0xcffff could not be reserved
[ 20.400461] system 00:0d: iomem range 0xe0000-0xfffff could not be reserved
[ 20.400463] system 00:0d: iomem range 0x100000-0x7fffffff could not be reserved
[ 20.400466] system 00:0d: iomem range 0x0-0x0 could not be reserved
[ 20.430898] PCI: Bridge: 0000:00:01.0
[ 20.430902] IO window: c000-cfff
[ 20.430905] MEM window: ec000000-efcfffff
[ 20.430908] PREFETCH window: d0000000-dfffffff
[ 20.430911] PCI: Bridge: 0000:00:1c.0
[ 20.430913] IO window: disabled.
[ 20.430917] MEM window: disabled.
[ 20.430920] PREFETCH window: eaf00000-eaffffff
[ 20.430925] PCI: Bridge: 0000:00:1c.2
[ 20.430926] IO window: disabled.
[ 20.430930] MEM window: efe00000-efefffff
[ 20.430933] PREFETCH window: disabled.
[ 20.430938] PCI: Bridge: 0000:00:1c.3
[ 20.430940] IO window: d000-dfff
[ 20.430944] MEM window: efd00000-efdfffff
[ 20.430947] PREFETCH window: disabled.
[ 20.430952] PCI: Bridge: 0000:00:1e.0
[ 20.430955] IO window: e000-efff
[ 20.430959] MEM window: eff00000-efffffff
[ 20.430962] PREFETCH window: disabled.
[ 20.430979] ACPI: PCI Interrupt 0000:00:01.0[A] -> GSI 16 (level, low) -> IRQ 16
[ 20.430984] PCI: Setting latency timer of device 0000:00:01.0 to 64
[ 20.431002] ACPI: PCI Interrupt 0000:00:1c.0[A] -> GSI 17 (level, low) -> IRQ 17
[ 20.431006] PCI: Setting latency timer of device 0000:00:1c.0 to 64
[ 20.431023] ACPI: PCI Interrupt 0000:00:1c.2[C] -> GSI 18 (level, low) -> IRQ 18
[ 20.431028] PCI: Setting latency timer of device 0000:00:1c.2 to 64
[ 20.431045] ACPI: PCI Interrupt 0000:00:1c.3[D] -> GSI 19 (level, low) -> IRQ 19
[ 20.431050] PCI: Setting latency timer of device 0000:00:1c.3 to 64
[ 20.431060] PCI: Setting latency timer of device 0000:00:1e.0 to 64
[ 20.431069] NET: Registered protocol family 2
[ 20.468331] IP route cache hash table entries: 32768 (order: 5, 131072 bytes)
[ 20.468573] TCP established hash table entries: 131072 (order: 8, 1048576 bytes)
[ 20.469053] TCP bind hash table entries: 65536 (order: 7, 524288 bytes)
[ 20.469293] TCP: Hash tables configured (established 131072 bind 65536)
[ 20.469295] TCP reno registered
[ 20.480393] checking if image is initramfs... it is
[ 20.931413] Switched to high resolution mode on CPU 0
[ 20.931525] Switched to high resolution mode on CPU 1
[ 20.987730] Freeing initrd memory: 7685k freed
[ 20.988512] audit: initializing netlink socket (disabled)
[ 20.988523] audit(1218566787.184:1): initialized
[ 20.988724] highmem bounce pool size: 64 pages
[ 20.990803] VFS: Disk quotas dquot_6.5.1
[ 20.990884] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
[ 20.991008] io scheduler noop registered
[ 20.991011] io scheduler anticipatory registered
[ 20.991012] io scheduler deadline registered
[ 20.991022] io scheduler cfq registered (default)
[ 21.260071] Boot video device is 0000:01:00.0
[ 21.260188] PCI: Setting latency timer of device 0000:00:01.0 to 64
[ 21.260224] assign_interrupt_mode Found MSI capability
[ 21.260253] Allocate Port Service[0000:00:01.0:pcie00]
[ 21.260336] PCI: Setting latency timer of device 0000:00:1c.0 to 64
[ 21.260376] assign_interrupt_mode Found MSI capability
[ 21.260407] Allocate Port Service[0000:00:1c.0:pcie00]
[ 21.260446] Allocate Port Service[0000:00:1c.0:pcie02]
[ 21.260531] PCI: Setting latency timer of device 0000:00:1c.2 to 64
[ 21.260571] assign_interrupt_mode Found MSI capability
[ 21.260603] Allocate Port Service[0000:00:1c.2:pcie00]
[ 21.260641] Allocate Port Service[0000:00:1c.2:pcie02]
[ 21.260729] PCI: Setting latency timer of device 0000:00:1c.3 to 64
[ 21.260768] assign_interrupt_mode Found MSI capability
[ 21.260800] Allocate Port Service[0000:00:1c.3:pcie00]
[ 21.260839] Allocate Port Service[0000:00:1c.3:pcie02]
[ 21.261114] isapnp: Scanning for PnP cards...
[ 21.612186] isapnp: No Plug & Play device found
[ 21.643927] Real Time Clock Driver v1.12ac
[ 21.644037] Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing enabled
[ 21.644154] serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
[ 21.644823] 00:0b: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
[ 21.645651] RAMDISK driver initialized: 16 RAM disks of 65536K size 1024 blocksize
[ 21.645718] input: Macintosh mouse button emulation as /devices/virtual/input/input0
[ 21.645822] PNP: PS/2 Controller [PNP0303:PS2K] at 0x60,0x64 irq 1
[ 21.645824] PNP: PS/2 appears to have AUX port disabled, if this is incorrect please boot with i8042.nopnp
[ 21.646348] serio: i8042 KBD port at 0x60,0x64 irq 1
[ 21.667319] mice: PS/2 mouse device common for all mice
[ 21.667454] EISA: Probing bus 0 at eisa.0
[ 21.667481] EISA: Detected 0 cards.
[ 21.667484] cpuidle: using governor ladder
[ 21.667485] cpuidle: using governor menu
[ 21.667553] NET: Registered protocol family 1
[ 21.667576] Using IPI No-Shortcut mode
[ 21.667601] registered taskstats version 1
[ 21.667702] Magic number: 4:60:797
[ 21.667727] hash matches device ptyr5
[ 21.667747] BIOS EDD facility v0.16 2004-Jun-25, 0 devices found
[ 21.667748] EDD information not available.
[ 21.667905] Freeing unused kernel memory: 368k freed
[ 21.686977] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input1
[ 22.864089] fuse init (API version 7.9)
[ 22.884075] ACPI: SSDT 7FFAE0C0, 0256 (r1 AMI CPU1PM 1 INTL 20060113)
[ 22.884478] ACPI: SSDT 7FFAE320, 0143 (r1 AMI CPU2PM 1 INTL 20060113)
[ 22.884710] ACPI Exception (processor_core-0816): AE_NOT_FOUND, Processor Device is not present [20070126]
[ 22.884722] ACPI Exception (processor_core-0816): AE_NOT_FOUND, Processor Device is not present [20070126]
[ 23.044322] usbcore: registered new interface driver usbfs
[ 23.044355] usbcore: registered new interface driver hub
[ 23.051648] usbcore: registered new device driver usb
[ 23.053539] USB Universal Host Controller Interface driver v3.0
[ 23.053590] ACPI: PCI Interrupt 0000:00:1a.0[A] -> GSI 22 (level, low) -> IRQ 20
[ 23.053602] PCI: Setting latency timer of device 0000:00:1a.0 to 64
[ 23.053607] uhci_hcd 0000:00:1a.0: UHCI Host Controller
[ 23.053817] uhci_hcd 0000:00:1a.0: new USB bus registered, assigned bus number 1
[ 23.053850] uhci_hcd 0000:00:1a.0: irq 20, io base 0x0000b880
[ 23.054025] usb usb1: configuration #1 chosen from 1 choice
[ 23.054063] hub 1-0:1.0: USB hub found
[ 23.054071] hub 1-0:1.0: 2 ports detected
[ 23.159982] ACPI: PCI Interrupt 0000:00:1a.1[B] -> GSI 21 (level, low) -> IRQ 21
[ 23.159995] PCI: Setting latency timer of device 0000:00:1a.1 to 64
[ 23.160000] uhci_hcd 0000:00:1a.1: UHCI Host Controller
[ 23.160030] uhci_hcd 0000:00:1a.1: new USB bus registered, assigned bus number 2
[ 23.160059] uhci_hcd 0000:00:1a.1: irq 21, io base 0x0000bc00
[ 23.160198] usb usb2: configuration #1 chosen from 1 choice
[ 23.160231] hub 2-0:1.0: USB hub found
[ 23.160239] hub 2-0:1.0: 2 ports detected
[ 23.263813] ACPI: PCI Interrupt 0000:00:1d.0[A] -> GSI 23 (level, low) -> IRQ 22
[ 23.263826] PCI: Setting latency timer of device 0000:00:1d.0 to 64
[ 23.263831] uhci_hcd 0000:00:1d.0: UHCI Host Controller
[ 23.263861] uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 3
[ 23.263891] uhci_hcd 0000:00:1d.0: irq 22, io base 0x0000b400
[ 23.264034] usb usb3: configuration #1 chosen from 1 choice
[ 23.264066] hub 3-0:1.0: USB hub found
[ 23.264074] hub 3-0:1.0: 2 ports detected
[ 23.367631] ACPI: PCI Interrupt 0000:00:1d.1[B] -> GSI 20 (level, low) -> IRQ 23
[ 23.367647] PCI: Setting latency timer of device 0000:00:1d.1 to 64
[ 23.367652] uhci_hcd 0000:00:1d.1: UHCI Host Controller
[ 23.367682] uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 4
[ 23.367712] uhci_hcd 0000:00:1d.1: irq 23, io base 0x0000b480
[ 23.367854] usb usb4: configuration #1 chosen from 1 choice
[ 23.367887] hub 4-0:1.0: USB hub found
[ 23.367896] hub 4-0:1.0: 2 ports detected
[ 23.399477] usb 1-1: new full speed USB device using uhci_hcd and address 2
[ 23.471490] ACPI: PCI Interrupt 0000:00:1d.2[C] -> GSI 21 (level, low) -> IRQ 21
[ 23.471504] PCI: Setting latency timer of device 0000:00:1d.2 to 64
[ 23.471509] uhci_hcd 0000:00:1d.2: UHCI Host Controller
[ 23.471541] uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 5
[ 23.471567] uhci_hcd 0000:00:1d.2: irq 21, io base 0x0000b800
[ 23.471714] usb usb5: configuration #1 chosen from 1 choice
[ 23.471747] hub 5-0:1.0: USB hub found
[ 23.471756] hub 5-0:1.0: 2 ports detected
[ 23.502248] SCSI subsystem initialized
[ 23.539124] libata version 3.00 loaded.
[ 23.575324] ACPI: PCI Interrupt 0000:00:1a.7[C] -> GSI 18 (level, low) -> IRQ 18
[ 23.575338] PCI: Setting latency timer of device 0000:00:1a.7 to 64
[ 23.575343] ehci_hcd 0000:00:1a.7: EHCI Host Controller
[ 23.575373] ehci_hcd 0000:00:1a.7: new USB bus registered, assigned bus number 6
[ 23.579284] ehci_hcd 0000:00:1a.7: debug port 1
[ 23.579292] PCI: cache line size of 128 is not supported by device 0000:00:1a.7
[ 23.579303] ehci_hcd 0000:00:1a.7: irq 18, io mem 0xebfffc00
[ 23.595162] ehci_hcd 0000:00:1a.7: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004
[ 23.595308] usb usb6: configuration #1 chosen from 1 choice
[ 23.595343] hub 6-0:1.0: USB hub found
[ 23.595351] hub 6-0:1.0: 4 ports detected
[ 23.699132] ACPI: PCI Interrupt 0000:00:1d.7[A] -> GSI 23 (level, low) -> IRQ 22
[ 23.699151] PCI: Setting latency timer of device 0000:00:1d.7 to 64
[ 23.699156] ehci_hcd 0000:00:1d.7: EHCI Host Controller
[ 23.699198] ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 7
[ 23.703115] ehci_hcd 0000:00:1d.7: debug port 1
[ 23.703123] PCI: cache line size of 128 is not supported by device 0000:00:1d.7
[ 23.703131] ehci_hcd 0000:00:1d.7: irq 22, io mem 0xebfff800
[ 23.718964] ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004
[ 23.719123] usb usb7: configuration #1 chosen from 1 choice
[ 23.719160] hub 7-0:1.0: USB hub found
[ 23.719169] hub 7-0:1.0: 6 ports detected
[ 23.822917] ahci 0000:02:00.0: version 3.0
[ 23.822952] ACPI: PCI Interrupt 0000:02:00.0[A] -> GSI 19 (level, low) -> IRQ 19
[ 24.206196] usb 6-1: new high speed USB device using ehci_hcd and address 2
[ 24.821252] ahci 0000:02:00.0: AHCI 0001.0000 32 slots 2 ports 3 Gbps 0x3 impl SATA mode
[ 24.821257] ahci 0000:02:00.0: flags: 64bit ncq pm led clo pmp pio slum part
[ 24.821265] PCI: Setting latency timer of device 0000:02:00.0 to 64
[ 24.821430] scsi0 : ahci
[ 24.821608] scsi1 : ahci
[ 24.821688] ata1: SATA max UDMA/133 abar m8192@0xefdfe000 port 0xefdfe100 irq 19
[ 24.821693] ata2: SATA max UDMA/133 abar m8192@0xefdfe000 port 0xefdfe180 irq 19
[ 25.140735] ata1: SATA link down (SStatus 0 SControl 300)
[ 25.460228] ata2: SATA link down (SStatus 0 SControl 300)
[ 25.460311] ata_piix 0000:00:1f.2: version 2.12
[ 25.460319] ata_piix 0000:00:1f.2: MAP [ P0 P2 P1 P3 ]
[ 25.615985] ACPI: PCI Interrupt 0000:00:1f.2[A] -> GSI 18 (level, low) -> IRQ 18
[ 25.616027] PCI: Setting latency timer of device 0000:00:1f.2 to 64
[ 25.616073] scsi2 : ata_piix
[ 25.616236] scsi3 : ata_piix
[ 25.616339] ACPI Error (psargs-0355): [FZHD] Namespace lookup failure, AE_NOT_FOUND
[ 25.616347] ACPI Error (psparse-0537): Method parse/execution failed [\_SB_.PCI0.SATA.CHN0._GTM] (Node f7c4c570), AE_NOT_FOUND
[ 25.616432] ACPI Error (psargs-0355): [FZHD] Namespace lookup failure, AE_NOT_FOUND
[ 25.616436] ACPI Error (psparse-0537): Method parse/execution failed [\_SB_.PCI0.SATA.CHN1._GTM] (Node f7c4c660), AE_NOT_FOUND
[ 25.616468] ata3: SATA max UDMA/133 cmd 0xa080 ctl 0xa000 bmdma 0x9800 irq 18
[ 25.616470] ata4: SATA max UDMA/133 cmd 0x9c00 ctl 0x9880 bmdma 0x9808 irq 18
[ 25.779908] ata3.00: ATA-7: WDC WD1600JS-58NCB1, 10.02E02, max UDMA/133
[ 25.779911] ata3.00: 312581808 sectors, multi 16: LBA48 NCQ (depth 0/32)
[ 25.795875] ata3.00: configured for UDMA/133
[ 25.961632] scsi 2:0:0:0: Direct-Access ATA WDC WD1600JS-58N 10.0 PQ: 0 ANSI: 5
[ 25.961707] ata_piix 0000:00:1f.5: MAP [ P0 -- P1 -- ]
[ 25.961736] ACPI: PCI Interrupt 0000:00:1f.5[A] -> GSI 18 (level, low) -> IRQ 18
[ 25.961773] PCI: Setting latency timer of device 0000:00:1f.5 to 64
[ 25.961822] scsi4 : ata_piix
[ 25.961882] scsi5 : ata_piix
[ 25.961965] ACPI Error (psargs-0355): [FZHD] Namespace lookup failure, AE_NOT_FOUND
[ 25.961973] ACPI Error (psparse-0537): Method parse/execution failed [\_SB_.PCI0.SAT1.CHN0._GTM] (Node f7c4dbd0), AE_NOT_FOUND
[ 25.962059] ACPI Error (psargs-0355): [FZHD] Namespace lookup failure, AE_NOT_FOUND
[ 25.962066] ACPI Error (psparse-0537): Method parse/execution failed [\_SB_.PCI0.SAT1.CHN1._GTM] (Node f7c4dcc0), AE_NOT_FOUND
[ 25.962110] ata5: SATA max UDMA/133 cmd 0xb080 ctl 0xb000 bmdma 0xa800 irq 18
[ 25.962113] ata6: SATA max UDMA/133 cmd 0xac00 ctl 0xa880 bmdma 0xa808 irq 18
[ 26.292834] PCI: Enabling device 0000:02:00.1 (0000 -> 0001)
[ 26.292842] ACPI: PCI Interrupt 0000:02:00.1[B] -> GSI 16 (level, low) -> IRQ 16
[ 26.292894] PCI: Setting latency timer of device 0000:02:00.1 to 64
[ 26.292912] ACPI: PCI interrupt for device 0000:02:00.1 disabled
[ 26.296991] ACPI: PCI Interrupt 0000:02:00.1[B] -> GSI 16 (level, low) -> IRQ 16
[ 26.297042] PCI: Setting latency timer of device 0000:02:00.1 to 64
[ 26.299067] scsi6 : pata_jmicron
[ 26.299134] scsi7 : pata_jmicron
[ 26.300060] ata7: PATA max UDMA/100 cmd 0xdc00 ctl 0xd880 bmdma 0xd400 irq 16
[ 26.300065] ata8: PATA max UDMA/100 cmd 0xd800 ctl 0xd480 bmdma 0xd408 irq 16
[ 26.302678] Driver 'sd' needs updating - please use bus_type methods
[ 26.302770] sd 2:0:0:0: [sda] 312581808 512-byte hardware sectors (160042 MB)
[ 26.302789] sd 2:0:0:0: [sda] Write Protect is off
[ 26.302793] sd 2:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ 26.302821] sd 2:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 26.302887] sd 2:0:0:0: [sda] 312581808 512-byte hardware sectors (160042 MB)
[ 26.302902] sd 2:0:0:0: [sda] Write Protect is off
[ 26.302906] sd 2:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ 26.302935] sd 2:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 26.302940] sda: sda1 sda2 < sda5 sda6 > sda3
[ 26.370234] sd 2:0:0:0: [sda] Attached SCSI disk
[ 26.374861] sd 2:0:0:0: Attached scsi generic sg0 type 0
[ 26.771704] usb 6-1: configuration #1 chosen from 1 choice
[ 26.783623] ata7.00: ATAPI: SONY DVD RW DRU-830A, SS23, max UDMA/66
[ 26.783646] ata7.01: ATAPI: HL-DT-ST CD-RW GCE-8240B, 1.07, max MWDMA2
[ 26.783658] ata7.00: limited to UDMA/33 due to 40-wire cable
[ 26.830154] Attempting manual resume
[ 26.830157] swsusp: Resume From Partition 8:6
[ 26.830159] PM: Checking swsusp image.
[ 26.830294] PM: Resume from disk failed.
[ 26.876587] kjournald starting. Commit interval 5 seconds
[ 26.876601] EXT3-fs: mounted filesystem with ordered data mode.
[ 26.954368] ata7.00: configured for UDMA/33
[ 27.126209] ata7.01: configured for MWDMA2
[ 27.193472] usb 7-3: new high speed USB device using ehci_hcd and address 3
[ 27.292431] scsi 6:0:0:0: CD-ROM SONY DVD RW DRU-830A SS23 PQ: 0 ANSI: 5
[ 27.292519] scsi 6:0:0:0: Attached scsi generic sg1 type 5
[ 27.293621] scsi 6:0:1:0: CD-ROM HL-DT-ST CD-RW GCE-8240B 1.07 PQ: 0 ANSI: 5
[ 27.293707] scsi 6:0:1:0: Attached scsi generic sg2 type 5
[ 27.342044] usb 7-3: configuration #1 chosen from 1 choice
[ 27.342742] usbcore: registered new interface driver libusual
[ 27.562728] Initializing USB Mass Storage driver...
[ 27.581846] usb 3-2: new low speed USB device using uhci_hcd and address 2
[ 27.757709] usb 3-2: configuration #1 chosen from 1 choice
[ 27.770735] scsi8 : SCSI emulation for USB Mass Storage devices
[ 27.770785] usb-storage: device found at 2
[ 27.770788] usb-storage: waiting for device to settle before scanning
[ 27.770827] scsi9 : SCSI emulation for USB Mass Storage devices
[ 27.770871] usb-storage: device found at 3
[ 27.770874] usb-storage: waiting for device to settle before scanning
[ 27.770885] usbcore: registered new interface driver usb-storage
[ 27.770889] USB Mass Storage support registered.
[ 32.760781] usb-storage: device scan complete
[ 32.761162] usb-storage: device scan complete
[ 32.761288] scsi 8:0:0:0: Direct-Access Generic USB Disk 9.02 PQ: 0 ANSI: 2
[ 32.762170] scsi 9:0:0:0: Direct-Access Generic STORAGE DEVICE 0128 PQ: 0 ANSI: 0
[ 32.762630] sd 8:0:0:0: [sdb] 156301488 512-byte hardware sectors (80026 MB)
[ 32.763167] scsi 9:0:0:1: Direct-Access Generic STORAGE DEVICE 0128 PQ: 0 ANSI: 0
[ 32.763504] sd 8:0:0:0: [sdb] Write Protect is off
[ 32.763508] sd 8:0:0:0: [sdb] Mode Sense: 03 00 00 00
[ 32.763511] sd 8:0:0:0: [sdb] Assuming drive cache: write through
[ 32.764165] scsi 9:0:0:2: Direct-Access Generic STORAGE DEVICE 0128 PQ: 0 ANSI: 0
[ 32.764501] sd 8:0:0:0: [sdb] 156301488 512-byte hardware sectors (80026 MB)
[ 32.765164] scsi 9:0:0:3: Direct-Access Generic STORAGE DEVICE 0128 PQ: 0 ANSI: 0
[ 32.765397] sd 8:0:0:0: [sdb] Write Protect is off
[ 32.765401] sd 8:0:0:0: [sdb] Mode Sense: 03 00 00 00
[ 32.765404] sd 8:0:0:0: [sdb] Assuming drive cache: write through
[ 32.765409] sdb: unknown partition table
[ 33.005435] sd 8:0:0:0: [sdb] Attached SCSI disk
[ 33.005480] sd 8:0:0:0: Attached scsi generic sg3 type 0
[ 33.007059] sd 9:0:0:0: [sdc] Attached SCSI removable disk
[ 33.007101] sd 9:0:0:0: Attached scsi generic sg4 type 0
[ 33.008677] sd 9:0:0:1: [sdd] Attached SCSI removable disk
[ 33.008720] sd 9:0:0:1: Attached scsi generic sg5 type 0
[ 33.010299] sd 9:0:0:2: [sde] Attached SCSI removable disk
[ 33.010345] sd 9:0:0:2: Attached scsi generic sg6 type 0
[ 33.011920] sd 9:0:0:3: [sdf] Attached SCSI removable disk
[ 33.011963] sd 9:0:0:3: Attached scsi generic sg7 type 0
[ 34.203568] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[ 34.246374] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
[ 34.292069] Linux agpgart interface v0.102
[ 34.451051] iTCO_vendor_support: vendor-support=0
[ 34.483100] iTCO_wdt: Intel TCO WatchDog Timer Driver v1.02 (26-Jul-2007)
[ 34.483679] iTCO_wdt: Found a ICH8 or ICH8R TCO device (Version=2, TCOBASE=0x0860)
[ 34.483737] iTCO_wdt: initialized. heartbeat=30 sec (nowayout=0)
[ 34.757828] input: Power Button (FF) as /devices/virtual/input/input2
[ 34.786428] ACPI: Power Button (FF) [PWRF]
[ 34.786584] input: Power Button (CM) as /devices/virtual/input/input3
[ 34.806394] ACPI: Power Button (CM) [PWRB]
[ 36.376010] ACPI: PCI Interrupt 0000:03:00.0[A] -> GSI 18 (level, low) -> IRQ 18
[ 36.376023] PCI: Setting latency timer of device 0000:03:00.0 to 64
[ 36.376037] atl1 0000:03:00.0: version 2.0.7
[ 36.376875] ath_hal: module license 'Proprietary' taints kernel.
[ 36.418121] ath_hal: 0.9.18.0 (AR5210, AR5211, AR5212, RF5111, RF5112, RF2413, RF5413)
[ 36.519832] wlan: 0.9.4
[ 36.555725] ath_pci: 0.9.4
[ 36.555792] ACPI: PCI Interrupt 0000:05:00.0[A] -> GSI 21 (level, low) -> IRQ 21
[ 37.385351] b2c2-flexcop: B2C2 FlexcopII/II(b)/III digital TV receiver chip loaded successfully
[ 37.478403] input: PC Speaker as /devices/platform/pcspkr/input/input4
[ 37.630038] usbcore: registered new interface driver hiddev
[ 37.642243] input: A4Tech PS/2+USB Mouse as /devices/pci0000:00/0000:00:1d.0/usb3/3-2/3-2:1.0/input/input5
[ 37.668922] input,hidraw0: USB HID v1.10 Mouse [A4Tech PS/2+USB Mouse] on usb-0000:00:1d.0-2
[ 37.668944] usbcore: registered new interface driver usbhid
[ 37.668949] /build/buildd/linux-2.6.24/drivers/hid/usbhid/hid-core.c: v2.6:USB HID core driver
[ 37.686637] Driver 'sr' needs updating - please use bus_type methods
[ 37.696342] sr0: scsi3-mmc drive: 40x/40x writer dvd-ram cd/rw xa/form2 cdda tray
[ 37.696347] Uniform CD-ROM driver Revision: 3.20
[ 37.696412] sr 6:0:0:0: Attached scsi CD-ROM sr0
[ 37.711162] sr1: scsi3-mmc drive: 24x/40x writer cd/rw xa/form2 cdda tray
[ 37.711235] sr 6:0:1:0: Attached scsi CD-ROM sr1
[ 37.921670] parport_pc 00:06: reported by Plug and Play ACPI
[ 37.921777] parport0: PC-style at 0x378 (0x778), irq 7, dma 3 [PCSPP,TRISTATE,COMPAT,EPP,ECP,DMA]
[ 38.303953] ath_rate_sample: 1.2 (0.9.4)
[ 38.305611] wifi0: 11b rates: 1Mbps 2Mbps 5.5Mbps 11Mbps
[ 38.305620] wifi0: 11g rates: 1Mbps 2Mbps 5.5Mbps 11Mbps 6Mbps 9Mbps 12Mbps 18Mbps 24Mbps 36Mbps 48Mbps 54Mbps
[ 38.305633] wifi0: turboG rates: 6Mbps 12Mbps 18Mbps 24Mbps 36Mbps 48Mbps 54Mbps
[ 38.305642] wifi0: H/W encryption support: WEP AES AES_CCM TKIP
[ 38.305648] wifi0: mac 7.9 phy 4.5 radio 5.6
[ 38.305654] wifi0: Use hw queue 1 for WME_AC_BE traffic
[ 38.305656] wifi0: Use hw queue 0 for WME_AC_BK traffic
[ 38.305659] wifi0: Use hw queue 2 for WME_AC_VI traffic
[ 38.305661] wifi0: Use hw queue 3 for WME_AC_VO traffic
[ 38.305664] wifi0: Use hw queue 8 for CAB traffic
[ 38.305666] wifi0: Use hw queue 9 for beacons
[ 38.341735] wifi0: Atheros 5212: mem=0xefff0000, irq=21
[ 38.341969] flexcop-pci: will use the HW PID filter.
[ 38.341976] flexcop-pci: card revision 1
[ 38.341985] ACPI: PCI Interrupt 0000:05:02.0[A] -> GSI 23 (level, low) -> IRQ 22
[ 38.342375] ACPI: PCI Interrupt 0000:00:1b.0[A] -> GSI 22 (level, low) -> IRQ 20
[ 38.342394] PCI: Setting latency timer of device 0000:00:1b.0 to 64
[ 38.359799] DVB: registering new adapter (FlexCop Digital TV device)
[ 38.361359] b2c2-flexcop: MAC address = 00:d0:d7:02:73:e0
[ 38.556493] hda_codec: Unknown model for ALC662, trying auto-probe from BIOS...
[ 38.631465] b2c2-flexcop: found the stv0299 at i2c address: 0x68
[ 38.631473] DVB: registering frontend 0 (ST STV0299 DVB-S)...
[ 38.631520] b2c2-flexcop: initialization of 'Sky2PC/SkyStar 2 DVB-S' at the 'PCI' bus controlled by a 'FlexCopII' complete
[ 40.279491] lp0: using parport0 (interrupt-driven).
[ 40.322716] Adding 2931820k swap on /dev/sda6. Priority:-1 extents:1 across:2931820k
[ 40.871710] EXT3 FS on sda3, internal journal
[ 41.933231] ip_tables: (C) 2000-2006 Netfilter Core Team
[ 42.253848] No dock devices found.
[ 43.198590] apm: BIOS version 1.2 Flags 0x03 (Driver version 1.16ac)
[ 43.198596] apm: disabled - APM is not SMP safe.
[ 43.317415] ppdev: user-space parallel port driver
[ 43.468646] audit(1218556010.279:2): type=1503 operation="inode_permission" requested_mask="a::" denied_mask="a::" name="/dev/tty" pid=5193 profile="/usr/sbin/cupsd" namespace="default"
[ 44.784651] Bluetooth: Core ver 2.11
[ 44.785114] NET: Registered protocol family 31
[ 44.785121] Bluetooth: HCI device and connection manager initialized
[ 44.785128] Bluetooth: HCI socket layer initialized
[ 44.804718] Bluetooth: L2CAP ver 2.9
[ 44.804727] Bluetooth: L2CAP socket layer initialized
[ 44.868167] Bluetooth: RFCOMM socket layer initialized
[ 44.868184] Bluetooth: RFCOMM TTY layer initialized
[ 44.868188] Bluetooth: RFCOMM ver 1.8
[ 63.802688] NET: Registered protocol family 10
[ 63.803339] lo: Disabled Privacy Extensions
[ 63.804436] ADDRCONF(NETDEV_UP): eth0: link is not ready
[ 74.079154] ath0: no IPv6 routers present
