lino Italy kernel 2.6.24-19-generic

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



Hi all,

I just installed ubuntu 804 on my Acer extensa 5620z , but
after running scanmodem I do not see any modem specification inside
ModemData.txt 

Can someone help me ?

Thank you very much in advance for your help

lino

ModemData.txt  :

 Only plain text email is forwarded by the  Discuss@xxxxxxxxxxxxx List
Server,
 as HTML can contain viruses. Use as the email Subject Line:
           YourName, YourCountry  kernel 2.6.24-19-generic 
 With this Subject Line cogent experts will be alerted, and useful case
names left in the Archive.
 YourCountry will enable Country specific guidance. Linux experts in
YourCountry 
 can be found through: http://www.linux.org/groups/index.html.
They will know your Country's modem code, which may be essential for
dialup service.
Responses from Discuss@xxxxxxxxxxxxx are sometimes blocked by an
Internet Provider mail filters.
 So in a day, also check the Archived responses at
http://www.linmodems.org 
--------------------------  System information
----------------------------
CPU=i686,  
Linux version 2.6.24-19-generic (buildd@palmer) (gcc version 4.2.3
(Ubuntu 4.2.3-2ubuntu7)) #1 SMP Wed Jun 18 14:43:41 UTC 2008
 scanModem update of:  2008_07_23

 There are no blacklisted modem drivers in /etc/modprobe*  files 
Attached USB devices are:
 ID 3538:0042 Power Quotient International Co., Ltd Cool Drive U339
Flash Disk
 ID 062a:0000 Creative Labs Optical Mouse

USB modems not recognized

For candidate card in slot 00:1b.0, firmware information and bootup
diagnostics are:
 PCI slot	PCI ID		SubsystemID	Name
 ----------	---------	---------	--------------
 00:1b.0	8086:284b	1025:011f	Audio device: Intel Corporation 82801H 

 Modem interrupt assignment and sharing: 
 21:        370        355   IO-APIC-fasteoi   uhci_hcd:usb2, HDA Intel
 --- Bootup diagnostics for card in PCI slot 00:1b.0 ----
[   29.858223] ACPI: PCI Interrupt 0000:00:1b.0[A] -> GSI 21 (level,
low) -> IRQ 21
[   29.858254] PCI: Setting latency timer of device 0000:00:1b.0 to 64


===== Advanced Linux Sound Architecture (ALSA) diagnostics ===== 
The ALSA packages provide audio support and also drivers for some
modems.
ALSA diagnostics are written during bootup to /proc/asound/ folders.

 PCI slot 00:1b.0 has a High Definition Audio Card
 The drivers are in the kernel modules tree at:
 /lib/modules/2.6.24-19-generic/ubuntu/sound/alsa-driver/pci/hda/snd-hda-intel.ko

The ALSA verion is 1.0.15
The modem cards detected by "aplay -l"  are: None


The /proc/asound/pcm file reports:
-----------------------
00-04: ALC268 Analog : ALC268 Analog : capture 1
00-00: ALC268 Analog : ALC268 Analog : playback 1 : capture 1

about /proc/asound/cards:
------------------------
 0 [Intel          ]: HDA-Intel - HDA Intel
                      HDA Intel at 0xfc300000 irq 21
=== Finished firmware and bootup diagnostics, next deducing cogent
software. ===

A candidate modem is not evident among the PCI devices:
------------------------------------------------
00:02.0 VGA compatible controller: Intel Corporation Mobile GM965/GL960
Integrated Graphics Controller (rev 03)
00:02.1 Display controller: Intel Corporation Mobile GM965/GL960
Integrated Graphics Controller (rev 03)
00:1b.0 Audio device: Intel Corporation 82801H (ICH8 Family) HD Audio
Controller (rev 03)
00:1f.1 IDE interface: Intel Corporation 82801HBM/HEM (ICH8M/ICH8M-E)
IDE Controller (rev 03)
00:1f.2 SATA controller: Intel Corporation 82801HBM/HEM (ICH8M/ICH8M-E)
SATA AHCI Controller (rev 03)
00:1f.3 SMBus: Intel Corporation 82801H (ICH8 Family) SMBus Controller
(rev 03)
02:00.0 Ethernet controller: Broadcom Corporation NetLink BCM5787M
Gigabit Ethernet PCI Express (rev 02)
04:00.0 Network controller: Broadcom Corporation BCM94311MCG wlan
mini-PCI (rev 01)
0f:06.1 FireWire (IEEE 1394): Texas Instruments PCIxx12 OHCI Compliant
IEEE 1394 Host Controller
0f:06.2 Mass storage controller: Texas Instruments 5-in-1 Multimedia
Card Reader (SD/MMC/MS/MS PRO/xD)
0f:06.3 SD Host controller: Texas Instruments PCIxx12 SDA Standard
Compliant SD Host Controller
------------------------------------------------
 with USB and bridge devices not displayed.

 If your modem is connected by an external serial cable,
 or mounted internally on an ISA card, scanModem would not access it. 
 Try with Root permission
 $ sudo wvdialconf  /etc/wvdial.conf
 to detect these modem types and some USB modems.
 If the detection is successful, read the DOCs/wvdial.txt .
 Edit the /etc/wvdial.conf with Root permission:
 	sudo  gedit  /etc/wvdial.conf
  will be able to dial out with Root permission:
	sudo wvdial

 Many modems for which scanModem fails have Conexant chips. 
 From http://www.linuxant.com/drivers/modemident.php
 get the ListModem tool, which will report on Conexant chipset modems

 If the above tests fail, please provide any independent information
available on your modem.
 If an alternative boot into Microsoft windows can be done, do mouse
clicks on:
   Start > Settings > Control Panel > Classical View (for Window XP) >
System
> Hardware > Device Manager > Modems > Click on the + > Modem. Double
click to
expand the graphic. Manufacturer information may be displayed. For
example, CXT
stands for Conexant. Click the Diagnostics Tab. Record any hardware ID
or vendor
and device information. From the Driver Details TAB, copy out the VENdor
and DEVice information.
Next do the Query Modem and record the ATI specifications displayed such
as:
    ATI3 - Agere SoftModem Version 2.1.22
    ATI5 - 2.1.22, AMR Intel MB, AC97 ID:SIL REV:0x27
Try to identify the modem setup file, with name perhaps MODEM.INF.
If may contain chipset Vendor informaton.

 The /proc/asound/ audio+modem diagostics are being copied.
 Finished copy to Modem/ALSAroot.tgz

Predictive diagnostics for card in bus 00:1b.0:
	Modem chipset not detected on
NAME="Audio device: Intel Corporation 82801H "
CLASS=0403
PCIDEV=8086:284b
SUBSYS=1025:011f
IRQ=21
HDA=8086:284b
SOFT=8086:284b.HDA


 High Definition Audio (HDA) cards MAY host a modem chip in their
Subsystem, 
 and many are supported by the ALSA audio+modem driver snd-hda-intel
 A modem was not detected on HDA card 8086:284b.
 If another modem card is present, then most likely 8086:284b does not
host a modem.
 If another modem card has not been detected, then possibilities are:
	1) A Conexant modem chip is present on 8086:284b, as Conexant chips
 are frequently not detectable by ALSA diagnostics
	2) The modem may be of the older non-PCI Controller Chipset (hardware)
type.
Try detection with Root permission:
	sudo wvdialconf  /etc/wvdial.conf

 For candidate modem in:  00:1b.0
   0403 Audio device: Intel Corporation 82801H 
      Primary device ID:  8086:284b
    Subsystem PCI_id  1025:011f 
    Softmodem codec or chipset from diagnostics: 
                               from    Archives: 
                        
      

Support type needed or chipset:	

Support can likely be achieved through two mutually exclusive
alternatives:
1) The hsfmodem software for Conexant chipset modems: Read
DOCs/Conexant.txt
The following ALSA alternative CANNOT work with Conexant modems.

2) An ALSA modem driver plus slmodemd.  Read DOCs/Smartlink.txt for
details, and
to test get the package SLMODEMD.gcc4.2.tar.gz from:  
	http://linmodems.technion.ac.il/packages/smartlink/

----------------end Softmodem section --------------

Writing DOCs/Intel.txt

For owners of a Dell PCs with Conexant HSF modems, a driver source
package with full speed enabled is available, but requires driver
compiling. Read DOCs/Conexant.txt

 From  http://www.linuxant.com/drivers/hsf/full/downloads-ubuntu-x86.php
 download
hsfmodem-7.68.00.12full_k2.6.24_19_generic_ubuntu_i386.deb.zip 
 Under Linux unpack with:
 $ unzip hsfmodem*.zip
 Then install with:
 $ sudo dpkg -i hsfmodem*.deb
 Subsequently, the modem should be found with
 $ sudo wvdialconf /etc/wvdial.conf
 Edit in your personal information with:
 $ sudo gedit /etc/wvdial.conf
 and try dialing out with:
 $ sudo wvdial.
 See DOCs/Testing.txt  for details.
 
 Read DOCs/Conexant.txt

Writing DOCs/Conexant.txt

Writing DOCs/Smartlink.txt
============ end Smartlink section =====================


 The base of the UDEV device file system is: /dev/.udev

 Versions adequately match for the compiler installed: 4.2.3
             and the compiler used in kernel assembly: 4.2.3


 
 Minimal compiling resources appear complete:
   make utility - /usr/bin/make
   Compiler version 4.2
   linuc_headers base folder /lib/modules/2.6.24-19-generic/build

 However some compilations and executable functions may need additional
files,
 in the FileNames.h (so called kernel "h"eaders) collection installed
in  /usr/include/ .
 For martian_modem, additional required packages are n. The also
required headers of package libc6 are commonly installed by default. 
 Compiling hsfmodem drivers does require linux-libc-dev and libc6-dev
packages, for kernels 2.6.24 and later versions.
 In not included on your install CD, search for them at
http://packages.ubuntu.com
 or comparable Repository for other Linux distros.
 When compiling ALSA drivers, the utility "patch" will also be needed.




If a driver compilation fails, with message including some lack of some
FileName.h (stdio.h for example), then
Some additional kernel-header files need installation to /usr/include.
The minimal additional packages are libc6-dev
and any of its dependents, under Ubuntu linux-libc-dev

If an alternate ethernet connection is available,
$  apt-get update
$  apt-get -s install linux-kernel-devel
will install needed packages.
For Debian/Ubuntu related distributions, run the following command to
display the needed package list:

Otherwise packages have to be found through http://packages.ubuntu.com
Once downloaded and transferred into a Linux partition,
they can be installed alltogether with:
$ sudo dpkg -i *.deb


Checking pppd properties:
	-rwsr-xr-- 1 root dip 269256 2007-10-04 21:57 /usr/sbin/pppd

In case of an "error 17" "serial loopback" problem, see:

http://linmodems.technion.ac.il/linmodems/archive-sixth/msg02637.html

To enable dialout without Root permission do:
	$ su - root  (not for Ubuntu)
        sudo chmod a+x /usr/sbin/pppd
or under Ubuntu related Linuxes
	sudo chmod a+x /usr/sbin/pppd

Checking settings of:	/etc/ppp/options
asyncmap 0
noauth
crtscts
lock
hide-password
modem
proxyarp
lcp-echo-interval 30
lcp-echo-failure 4
noipx

In case of a message like:
   Warning: Could not modify /etc/ppp/pap-secrets: Permission denied
see http://linmodems.technion.ac.il/bigarch/archive-sixth/msg04656.html

Read Modem/DOCs/YourSystem.txt concerning other COMM channels: eth0
Which can interfere with Browser naviagation.

 Don't worry about the following, it is for experts should trouble
shooting be necessary.
==========================================================

 Checking for modem support lines:
 --------------------------------------
     /device/modem symbolic link:   
slmodemd created symbolic link /dev/ttySL0:  
     Within /etc/udev/ files:

     Within /etc/modprobe.conf files:
/etc/modprobe.d/alsa-base:options snd-atiixp-modem index=-2
/etc/modprobe.d/alsa-base:options snd-via82xx-modem index=-2
/etc/modprobe.d/blacklist-modem:# Uncomment these entries in order to
blacklist unwanted modem drivers
/etc/modprobe.d/blacklist-modem:# blacklist snd-atiixp-modem
/etc/modprobe.d/blacklist-modem:# blacklist snd-via82xx-modem
     Within any ancient /etc/devfs files:

     Within ancient kernel 2.4.n /etc/module.conf files:

--------- end modem support lines --------






[Index of Archives]     [Linux Media Development]     [Asterisk]     [DCCP]     [Netdev]     [X.org]     [Xfree86]     [Fedora Women]     [Linux USB]

  Powered by Linux