Clive
With
$ man pppd
2 An error was detected in processing the options given,
such as two mutually exclusive options being used.
> changes: +MS=34 & +MS=90 gave "bad init string" messages.
Just use
+MS=NumberValue
once as the last item on the line.
Re: --> Sending: ATQ0 V1 E1 S0=0 &C1 &D2 +FCLASS=0 X3
ATQ0 V1 E1 S0=0 &C1 &D2 +FCLASS=0 X3
--------------
X3 shouldn't be last. Use:
Init2 = ATQ0 V1 E1 S0=0 X3 &C1 &D2 +FCLASS=0
or
Init2 = ATQ0 V1 E1 S0=0 X3 &C1 &D2 +MS=34
RE: Sending: ATDP0198333713
ATDP is for older pulse dial phone liness, It yours is Touch Tone,
use the default
ATDT
You can also test adding a line
Stupid Mode = 1
needed with some Internet Providers.
MarvS
On Fri, Jul 18, 2008 at 7:33 PM, Clive Oatley <cliveoatley@xxxxxxxxx> wrote:
> I have reached the point where I can get the modem to dial, but it fails to
> connect.
> I have worked through wvdial.txt & tried the solutions offered there. Some
> changes: +MS=34 & +MS=90 gave "bad init string" messages.
> Also, is it possible to turn of the modem sound off as I find the dialling
> noises really annoying.
>
> See below:
>
> clive@clive-desktop:~$ sudo gedit /etc/wvdial.conf
> [sudo] password for clive:
> clive@clive-desktop:~$ sudo wvdial
> --> WvDial: Internet dialer version 1.60
> --> Initializing modem.
> --> Sending: ATZ
> ATZ
> OK
> --> Sending: ATQ0 V1 E1 S0=0 &C1 &D2 +FCLASS=0
> ATQ0 V1 E1 S0=0 &C1 &D2 +FCLASS=0
> OK
> --> Modem initialized.
> --> Sending: ATDT0198333713 ;
> --> Waiting for carrier.
> ATDT0198333713 ;
> OK
> --> Timed out while dialing. Trying again.
> --> Sending: ATDT0198333713 ;
> --> Waiting for carrier.
> ATDT0198333713 ;
> OK
> Caught signal 2: Attempting to exit gracefully...
> --> Disconnecting at Sat Jul 19 08:58:47 2008
> clive@clive-desktop:~$ sudo gedit /etc/wvdial.conf
> clive@clive-desktop:~$ sudo wvdial
> --> WvDial: Internet dialer version 1.60
> --> Initializing modem.
> --> Sending: ATZ
> ATZ
> --> Sending: ATQ0
> ATQ0
> OK
> --> Re-Sending: ATZ
> ATZ
> OK
> --> Initializing modem.
> --> Sending: ATZ
> ATZ
> OK
> --> Sending: ATQ0 V1 E1 S0=0 &C1 &D2 +FCLASS=0 X3
> ATQ0 V1 E1 S0=0 &C1 &D2 +FCLASS=0 X3
> OK
> --> Modem initialized.
> --> Sending: ATDT0198333713 ;
> --> Waiting for carrier.
> ATDT0198333713 ;
> OK
> --> Timed out while dialing. Trying again.
> --> Sending: ATDT0198333713 ;
> --> Waiting for carrier.
> p
> ATDT0198333713 ;
> Caught signal 2: Attempting to exit gracefully...
> --> Disconnecting at Sat Jul 19 09:02:43 2008
> clive@clive-desktop:~$ sudo gedit /etc/wvdial.conf
> clive@clive-desktop:~$ sudo wvdial
> --> WvDial: Internet dialer version 1.60
> --> Initializing modem.
> --> Sending: ATZ
> ATZ
> OK
> --> Sending: ATQ0 V1 E1 S0=0 &C1 &D2 +MS=34 X3
> ATQ0 V1 E1 S0=0 &C1 &D2 +MS=34 X3
> ERROR
> --> Bad init string.
> --> Initializing modem.
> --> Sending: ATZ
> ATZ
> OK
> --> Sending: ATQ0 V1 E1 S0=0 &C1 &D2 +MS=34 X3
> ATQ0 V1 E1 S0=0 &C1 &D2 +MS=34 X3
> ERROR
> --> Bad init string.
> --> Initializing modem.
> --> Sending: ATZ
> ATZ
> OK
> --> Sending: ATQ0 V1 E1 S0=0 &C1 &D2 +MS=34 X3
> ATQ0 V1 E1 S0=0 &C1 &D2 +MS=34 X3
> ERROR
> --> Bad init string.
> clive@clive-desktop:~$ sudo gedit /etc/wvdial.conf
> clive@clive-desktop:~$ sudo wvdial
> --> WvDial: Internet dialer version 1.60
> --> Initializing modem.
> --> Sending: ATZ
> ATZ
> OK
> --> Sending: ATQ0 V1 E1 S0=0 &C1 &D2 +MS=90 X3
> ATQ0 V1 E1 S0=0 &C1 &D2 +MS=90 X3
> ERROR
> --> Bad init string.
> --> Initializing modem.
> --> Sending: ATZ
> ATZ
> OK
> --> Sending: ATQ0 V1 E1 S0=0 &C1 &D2 +MS=90 X3
> ATQ0 V1 E1 S0=0 &C1 &D2 +MS=90 X3
> ERROR
> --> Bad init string.
> --> Initializing modem.
> --> Sending: ATZ
> ATZ
> OK
> --> Sending: ATQ0 V1 E1 S0=0 &C1 &D2 +MS=90 X3
> ATQ0 V1 E1 S0=0 &C1 &D2 +MS=90 X3
> ERROR
> --> Bad init string.
> clive@clive-desktop:~$ sudo gedit /etc/wvdial.conf
> clive@clive-desktop:~$ sudo wvdial
> --> WvDial: Internet dialer version 1.60
> --> Initializing modem.
> --> Sending: ATZ
> ATZ
> OK
> --> Sending: ATQ0 V1 E1 S0=0 &C1 &D2 +FCLASS=0 X3
> ATQ0 V1 E1 S0=0 &C1 &D2 +FCLASS=0 X3
> OK
> --> Modem initialized.
> --> Sending: ATDP0198333713 ;
> --> Waiting for carrier.
> ATDP0198333713 ;
> OK
> --> Timed out while dialing. Trying again.
> --> Sending: ATDP0198333713 ;
> --> Waiting for carrier.
> p
> ATDP0198333713 ;
> Caught signal 2: Attempting to exit gracefully...
> --> Disconnecting at Sat Jul 19 09:08:28 2008
> clive@clive-desktop:~$ sudo gedit /etc/wvdial.conf
> clive@clive-desktop:~$ sudo wvdial
> --> WvDial: Internet dialer version 1.60
> --> Initializing modem.
> --> Sending: ATZ
> ATZ
> OK
> --> Sending: ATQ0 V1 E1 S0=0 &C1 &D2 +FCLASS=0
> ATQ0 V1 E1 S0=0 &C1 &D2 +FCLASS=0
> OK
> --> Modem initialized.
> --> Sending: ATDT0198333713 ;
> --> Waiting for carrier.
> ATDT0198333713 ;
> OK
> --> Timed out while dialing. Trying again.
> --> Sending: ATDT0198333713 ;
> --> Waiting for carrier.
> ATDT0198333713 ;
> OK
> Caught signal 2: Attempting to exit gracefully...
> --> Disconnecting at Sat Jul 19 09:11:35 2008
> clive@clive-desktop:~$ sudo wvdialconf wvtest
> Editing `wvtest'.
>
> Scanning your serial ports for a modem.
>
> ttyS0<*1>: ATQ0 V1 E1 -- ATQ0 V1 E1
> ttyS0<*1>: failed with 2400 baud, next try: 9600 baud
> ttyS0<*1>: ATQ0 V1 E1 -- OK
> ttyS0<*1>: ATQ0 V1 E1 Z -- OK
> ttyS0<*1>: ATQ0 V1 E1 S0=0 -- OK
> ttyS0<*1>: ATQ0 V1 E1 S0=0 &C1 -- OK
> ttyS0<*1>: ATQ0 V1 E1 S0=0 &C1 &D2 -- OK
> ttyS0<*1>: ATQ0 V1 E1 S0=0 &C1 &D2 +FCLASS=0 -- OK
> ttyS0<*1>: Modem Identifier: ATI -- IP568 Data/Fax/Voice 56K Modem
> ttyS0<*1>: Speed 19200: AT -- OK
> ttyS0<*1>: Speed 38400: AT -- OK
> ttyS0<*1>: Speed 57600: AT -- OK
> ttyS0<*1>: Speed 115200: AT -- OK
> ttyS0<*1>: Max speed is 115200; that should be safe.
> ttyS0<*1>: ATQ0 V1 E1 S0=0 &C1 &D2 +FCLASS=0 -- OK
> Modem Port Scan<*1>: S2 S3
>
> Found a modem on /dev/ttyS0.
> wvtest<Warn>: Can't open 'wvtest' for reading: No such file or directory
> wvtest<Warn>: ...starting with blank configuration.
> Modem configuration written to wvtest.
> ttyS0<Info>: Speed 115200; init "ATQ0 V1 E1 S0=0 &C1 &D2 +FCLASS=0"
> clive@clive-desktop:~$
>
>
>
