Safety,
For 11c1:044e Communication controller: Agere Systems LT WinModem
martian-full-20080625.tar.gz from
http://linmodems.technion.ac.il/packages/ltmodem/kernel-2.6/martian/
is the modem code package you will need.
Also get the MarsTest.txt, though it needs and update in some details.
But before using it, the Ubuntu linux-libc-dev libc6-dev packages
must be installed,
for additional compiling support.
Put the Ubuntu Hardy install CD in place and:
$ sudo apt-get install linux-libc-dev libc6-dev
If the packages are not on the install CD,
Start at http://packages.ubuntu.com/
Search for libc6-dev in the Hardy release
You need to download the packages for linux-libc-dev and libc6-dev
Both can be co-installed with
$ sudo dpkg -i li*.deb
Now you can start working with the martian package. Unpack it with:
$ tar zxf martian*.tar.gz
Move into the new folder:
$ cd martian-full-20080625
Look around
$ ls
$ make
if successful will will assembly a driver martian_dev.ko and
martian_modem, a smart manager. Install them with:
$ sudo make install.
At this stage, you can
$ martian_modem --help
Reboot and rerun
$ ./scanModem
There is an outstanding problem that
The modem interrupt (IRQ) is 255 . IRQs of 0 or 255 are not
functional!!
The CPU cannot control the modem until this situation is corrected!!
But possible installation of the software may cure it.
If not, we will provide additional guidance then.
This stuff is only arcane the 1st time through.
Keep the faith!
MarvS
scanModem maintainer
On Tue, Jul 8, 2008 at 3:10 AM, safetycopy <safetycopy@xxxxxxxxx>
wrote:
Hi, I'm completely new to Linux (I'm using Hardy 8.04) and am trying
to
get
my modem working. I used scanModem and the output is included below.
Please
make any instructions 'for dummies' as I'm a total beginner!
-------------------------
Only plain text email is forwarded by the Discuss@xxxxxxxxxxxxx List
Server,
as HTML can contain viruses. Use as the email Subject Line:
YourName, YourCountry kernel 2.6.24-16-generic
With this Subject Line cogent experts will be alerted, and useful
case
names
left in the Archive.
YourCountry will enable Country specific guidance. Linux experts in
YourCountry
can be found through: http://www.linux.org/groups/index.html.
They will know your Country's modem code, which may be essential for
dialup
service.
Responses from Discuss@xxxxxxxxxxxxx are sometimes blocked by an
Internet
Provider mail filters.
So in a day, also check the Archived responses at
http://www.linmodems.org
-------------------------- System information
----------------------------
CPU=i686, Linux version 2.6.24-16-generic (buildd@palmer) (gcc
version
4.2.3
(Ubuntu 4.2.3-2ubuntu7)) #1 SMP Thu Apr 10 13:23:42 UTC 2008
scanModem update of: 2008_06_28
There are no blacklisted modem drivers in /etc/modprobe* files
Attached USB devices are:
ID 03f0:1016 Hewlett-Packard Jornada 548 / iPAQ HW6515 Pocket PC
ID 045e:0039 Microsoft Corp. IntelliMouse Optical
ID 109f:7148 eSOL Co., Ltd
USB modems not recognized
For candidate card in slot 01:0b.0, firmware information and bootup
diagnostics are:
PCI slot PCI ID SubsystemID Name
---------- --------- --------- --------------
01:0b.0 11c1:044e 1235:044e Communication controller: Agere
Systems
LT WinModem
Modem interrupt assignment and sharing:
===================================
The modem interrupt (IRQ) is 255 . IRQs of 0 or 255 are not
functional!!
The CPU cannot control the modem until this situation is corrected!!
Possible corrections are:
1) Within the boot up BIOS, change from a Windows to a non-PNP/Other
Operating System type.
Instructions for accessing BIOS are at:
http://linmodems.technion.ac.il/resources.html within: Additional
Resourcces.
2a) Add an option "pci=routeirq" to the kernel boot up line.
Here is an example paragraph from /boot/grub/menu.lst :
title Ubuntu, kernel 2.6.15-26-686
root (hd0,6)
kernel /boot/vmlinuz-2.6.15-26-686 root=/dev/hda7 ro
pci=routeirq
initrd /boot/initrd.img-2.6.15-26-686
savedefault
2b) Same as above, but use "pollirq" instead of "pci=routeirq".
3) Within some BIOS setups, IRQ assignments can be changed.
4) On non-laptop systems, moving the modem card to another slot has
helped.
5) Sometimes upgrading the kernel changes IRQ assignment.
=====================================
--- Bootup diagnostics for card in PCI slot 01:0b.0 ----
=== Finished firmware and bootup diagnostics, next deducing cogent
software.
===
Predictive diagnostics for card in bus 01:0b.0:
Modem chipset detected on
NAME="Communication controller: Agere Systems LT WinModem "
CLASS=0780
PCIDEV=11c1:044e
SUBSYS=1235:044e
IRQ=255
IDENT=Agere.DSP
For candidate modem in: 01:0b.0
0780 Communication controller: Agere Systems LT WinModem
Primary device ID: 11c1:044e
Support type needed or chipset: Agere.DSP
----------------end Softmodem section --------------
The modem has a Lucent/Agere/LSI Mars or Apollo DSP (digital signal
processing) chipset.
Support packages for 2.6.n kernels are at:
http://linmodems.technion.ac.il/packages/ltmodem/kernel-2.6/martian/
,
with
current update martian-full-20071011.tar.gz
See DOCs/AgereDSP.txt for Details.
Vendor 11c1 is Lucent Technologies with modem technology now under
LSI
Inc.
Their Linux code developer/maintainer is Soumyendu Sarkar. Support
for
a
chipset and its
continued maintenance is only initiated at the request of a major
chipset
buyer,
or comparable sponsor. Several different modem chipset types are
produced:
with varying support under Linux.
Device ID Support Name Comment
--------- ------------- -----------
-----------------------------
0480 serial drivers Venus controller chipset 1673JV7
0440-045d martian Mars/Apollo DSP (digital signal
processing)
chipsets
0462 none 56K.V90/ADSL Wildwire
048d none SV2P soft modem
048(c or f) AGRSM SV2P soft modem
0600 none soft modem, very few in the field.
0620 AGRSM Pinball soft modem, in some HP desktop PCs
011c11040 AGRSM_RedFlag Softmodem on some High Definition Audio
cards,
support only for Red Flag kernel 2.6.21-20
062(1-3) none SV92PP,Pinball soft modem, in some HP
desktop
PCs
martian - At
http://linmodems.technion.ac.il/packages/ltmodem/kernel-2.6/martian/
AGRSM - At http://linmodems.technion.ac.il/packages/ltmodem/sv92/ ,
the
agrsm-20080203.tar.gz
AGRSM_RedFlag at At
http://linmodems.technion.ac.il/packages/ltmodem/11c11040/
The suse-10-2a.tar.gz has newer Agere/LSI code, but there are
compiling
problems with newer kernels/
0x044e -- Mars 3 Mercury data fax only
-------------- end Agere Systems section -------------------
Completed candidate modem analyses.
The base of the UDEV device file system is: /dev/.udev
Versions adequately match for the compiler installed: 4.2.3
and the compiler used in kernel assembly: 4.2.3
Minimal compiling resources appear complete:
make utility - /usr/bin/make
Compiler version 4.2
linuc_headers base folder /lib/modules/2.6.24-16-generic/build
However some compilations and executable functions may need
additional
files,
in the FileNames.h (so called kernel "h"eaders) collection installed
in
/usr/include/ .
For martian_modem, additional required packages are libc6-dev (and
for
Debian/Ubuntu,
linux-libc-dev). The also required headers of package libc6 are
commonly
installed by default.
Compiling hsfmodem drivers does require linux-libc-dev and libc6-dev
packages, for kernels 2.6.24 and later versions.
In not included on your install CD, search for them at
http://packages.ubuntu.com
or comparable Repository for other Linux distros.
When compiling ALSA drivers, the utility "patch" will also be needed.
If a driver compilation fails, with message including some lack of
some
FileName.h (stdio.h for example), then
Some additional kernel-header files need installation to
/usr/include.
The
minimal additional packages are libc6-dev
and any of its dependents, under Ubuntu linux-libc-dev
If an alternate ethernet connection is available,
$ apt-get update
$ apt-get -s install linux-kernel-devel
will install needed packages.
For Debian/Ubuntu related distributions, run the following command to
display the needed package list:
Otherwise packages have to be found through
http://packages.ubuntu.com
Once downloaded and transferred into a Linux partition,
they can be installed alltogether with:
$ sudo dpkg -i *.deb
Checking pppd properties:
-rwsr-xr-- 1 root dip 269256 2007-10-04 15:57 /usr/sbin/pppd
In case of an "error 17" "serial loopback" problem, see:
http://linmodems.technion.ac.il/linmodems/archive-sixth/msg02637.html
To enable dialout without Root permission do:
$ su - root (not for Ubuntu)
sudo chmod a+x /usr/sbin/pppd
or under Ubuntu related Linuxes
sudo chmod a+x /usr/sbin/pppd
Checking settings of: /etc/ppp/options
asyncmap 0
noauth
crtscts
lock
hide-password
modem
proxyarp
lcp-echo-interval 30
lcp-echo-failure 4
noipx
In case of a message like:
Warning: Could not modify /etc/ppp/pap-secrets: Permission denied
see
http://linmodems.technion.ac.il/bigarch/archive-sixth/msg04656.html
Read Modem/DOCs/YourSystem.txt concerning other COMM channels: eth0
Which can interfere with Browser naviagation.
Don't worry about the following, it is for experts should trouble
shooting
be necessary.
==========================================================
Checking for modem support lines:
--------------------------------------
/device/modem symbolic link: slmodemd created symbolic link
/dev/ttySL0:
Within /etc/udev/ files:
Within /etc/modprobe.conf files:
/etc/modprobe.d/blacklist-modem:# Uncomment these entries in order to
blacklist unwanted modem drivers
/etc/modprobe.d/blacklist-modem:# blacklist snd-atiixp-modem
/etc/modprobe.d/blacklist-modem:# blacklist snd-via82xx-modem
/etc/modprobe.d/alsa-base:options snd-atiixp-modem index=-2
/etc/modprobe.d/alsa-base:options snd-via82xx-modem index=-2
Within any ancient /etc/devfs files:
Within ancient kernel 2.4.n /etc/module.conf files:
--------- end modem support lines --------
