Hi,
I'm not subscribed to this list, so please cc me in your replies.
I'm trying to setup my win modem on my laptop, and have ran the scan
tool, I have attached the modemDater file.
If someone can tell me where too go to learn about getting this to work
I would appreciate it.
Thanks for any help,
Daniel.
Only plain text email is forwarded by the Discuss@xxxxxxxxxxxxx List Server,
as HTML can contain viruses. Use as the email Subject Line:
YourName, YourCountry Debian GNU/Linux lenny/sid kernel 2.6.24-1-686
With this Subject Line cogent experts will be alerted, and useful case names left in the Archive.
YourCountry will enable Country specific guidance. Linux experts in YourCountry
can be found through: http://www.linux.org/groups/index.html.
They will know your Country's modem code, which may be essential for dialup service.
Responses from Discuss@xxxxxxxxxxxxx are sometimes blocked by an Internet Provider mail filters.
So in a day, also check the Archived responses at http://www.linmodems.org
-------------------------- System information ----------------------------
CPU=i686, Debian GNU/Linux lenny/sid
Linux version 2.6.24-1-686 (Debian 2.6.24-7) (dannf@xxxxxxxxxx) (gcc version 4.1.3 20080114 (prerelease) (Debian 4.1.2-19)) #1 SMP Thu May 8 02:16:39 UTC 2008
scanModem update of: 2008_06_28
There are no blacklisted modem drivers in /etc/modprobe* files
USB modems not recognized
For candidate card in slot 00:08.0, firmware information and bootup diagnostics are:
PCI slot PCI ID SubsystemID Name
---------- --------- --------- --------------
00:08.0 10b9:5457 103c:002a Modem: ALi Corporation M5457 AC'97 Modem Controller
Modem interrupt assignment and sharing:
10: 4977 XT-PIC-XT uhci_hcd:usb1, uhci_hcd:usb2, eth0, radeon@pci:0000:01:05.0
--- Bootup diagnostics for card in PCI slot 00:08.0 ----
PCI: Enabling device 0000:00:08.0 (0000 -> 0003)
ACPI: PCI Interrupt 0000:00:08.0[A] -> Link [LNK6] -> GSI 10 (level, low) -> IRQ 10
ACPI: PCI interrupt for device 0000:00:08.0 disabled
The PCI slot 00:08.0 of the modem card may be disabled early in
a bootup process, but then enabled later. If modem drivers load
but the modem is not responsive, read DOCs/Bootup.txt about possible fixes.
Send dmesg.txt along with ModemData.txt to discuss@xxxxxxxxxxxxx
if help is needed.
For candidate card in slot 00:06.0, firmware information and bootup diagnostics are:
PCI slot PCI ID SubsystemID Name
---------- --------- --------- --------------
00:06.0 10b9:5451 103c:002a Multimedia audio controller: ALi Corporation M5451 PCI AC-Link Controller Audio Device
Modem interrupt assignment and sharing:
5: 297736 XT-PIC-XT ALI 5451
--- Bootup diagnostics for card in PCI slot 00:06.0 ----
PCI: Enabling device 0000:00:06.0 (0005 -> 0007)
ACPI: PCI Interrupt 0000:00:06.0[A] -> Link [LNK7] -> GSI 5 (level, low) -> IRQ 5
===== Advanced Linux Sound Architecture (ALSA) diagnostics =====
The ALSA packages provide audio support and also drivers for some modems.
ALSA diagnostics are written during bootup to /proc/asound/ folders.
The ALSA verion is 1.0.16
The modem cards detected by "aplay -l" are: None
The /proc/asound/pcm file reports:
-----------------------
00-00: ALI 5451 : ALI 5451 : playback 32 : capture 1
about /proc/asound/cards:
------------------------
0 [A5451 ]: ALI5451 - ALI 5451
ALI 5451 at 0x1000, irq 5
=== Finished firmware and bootup diagnostics, next deducing cogent software. ===
Predictive diagnostics for card in bus 00:06.0:
Modem chipset detected on
NAME="Multimedia audio controller: ALi Corporation M5451 PCI AC-Link Controller Audio Device "
CLASS=0401
PCIDEV=10b9:5451
SUBSYS=103c:002a
IRQ=5
SOFT=10b9:5451.MC97
CodecClass=CXT
IDENT=slmodemd
SLMODEMD_DEVICE=hw:0,1
Driver=snd-ali5451
For candidate modem in: 00:06.0
0401 Multimedia audio controller: ALi Corporation M5451 PCI AC-Link Controller Audio Device
Primary device ID: 10b9:5451
Subsystem PCI_id 103c:002a
Softmodem codec or chipset from diagnostics:
from Archives:
CXTnn is a generic for all CXTnumbers, with Linuxant hsfmodem software support.
Support type needed or chipset: slmodemd
An ALSA (Advanced Linux Sound Architecture) modem driver: snd-ali5451
provides Low Level support enabling contact with the modem hardware.
For all BUT Conexant chip soft modems (using hsfmodem software)
complementary High Level support is through a Smartlink utility: slmodemd
Download from http://linmodems.technion.ac.il/packages/smartlink/
the package SLMODEMD.gcc4.1.tar.gz having a compiled slmodemd. Unpack under Linux with:
$ tar zxf SLMODEMD.gcc4.1.tar.gz
and read instructions therein. But briefly, the modem is setup with command:
slmodemd -c YOUR_COUNTRY --alsa -shw:0,1
reporting dynamic creation of ports:
/dev/ttySL0 --> /dev/pts/N , with N some number
Read DOCs/Smartlink.txt and Modem/DOCs/YourSystem.txt for follow through guidance.
----------------end Softmodem section --------------
Writing DOCs/Smartlink.txt
============ end Smartlink section =====================
Predictive diagnostics for card in bus 00:08.0:
Modem chipset detected on
NAME="Modem: ALi Corporation M5457 AC'97 Modem Controller"
CLASS=0703
PCIDEV=10b9:5457
SUBSYS=103c:002a
IRQ=10
SOFT=10b9:5457.MC97
CodecArchived=CXT
CodecClass=CXT
IDENT=hsfmodem
Driver=hsfmodem_drivers
For candidate modem in: 00:08.0
0703 Modem: ALi Corporation M5457 AC'97 Modem Controller
Primary device ID: 10b9:5457
Subsystem PCI_id 103c:002a
Softmodem codec or chipset from diagnostics:
from Archives: CXT, a Conexant type using hsfmodem software.
CXTnn is a generic for all CXTnumbers, with Linuxant hsfmodem software support.
Support type needed or chipset: hsfmodem
For owners of a Dell PCs with Conexant HSF modems, a driver source package with full speed enabled is available, but requires driver compiling. Read DOCs/Conexant.txt
Start at http://www.linuxant.com/drivers/hsf/full for
eventually download of a hsfmodem-7.68.00.07full_k.???.zip package
with ??? the package type (deb, rpm, tar etc)
These packages have compiled drivers but will also compile a driver,
if there is a mismatch between the resident kernel and provided driver.
The generic hsfmodem-7.68.00.07full.tar.gz package only provides compiling support
Read DOCs/Conexant.txt
Writing DOCs/Conexant.txt
Completed candidate modem analyses.
The base of the UDEV device file system is: /dev/.udev
The kernel was compiled with gcc version 4.1.3 and a compiler is not installed
linux-headers-2.6.24-1-686 resources needed for compiling are not manifestly ready!
If compiling is necessary packages must be installed, providing:
gcc-4.1 linux-headers-2.6.24-1-686
For Debian and some related distributions, a package kernel-kbuild-2.6-24 may be needed to support driver compiling.
If a driver compilation fails, with message including some lack of some FileName.h (stdio.h for example), then
Some additional kernel-header files need installation to /usr/include. The minimal additional packages are libc6-dev
and any of its dependents, under Ubuntu linux-libc-dev
If an alternate ethernet connection is available,
$ apt-get update
$ apt-get -s install linux-kernel-devel
will install needed packages.
For Debian/Ubuntu related distributions, run the following command to display the needed package list:
Otherwise packages have to be found through http://packages.ubuntu.com
Once downloaded and transferred into a Linux partition,
they can be installed alltogether with:
$ sudo dpkg -i *.deb
Checking pppd properties:
-rwsr-xr-- 1 root dip 260964 2008-04-09 02:35 /usr/sbin/pppd
In case of an "error 17" "serial loopback" problem, see:
http://linmodems.technion.ac.il/linmodems/archive-sixth/msg02637.html
To enable dialout without Root permission do:
$ su - root (not for Ubuntu)
chmod a+x /usr/sbin/pppd
or under Ubuntu related Linuxes
chmod a+x /usr/sbin/pppd
Checking settings of: /etc/ppp/options
asyncmap 0
auth
crtscts
lock
hide-password
modem
proxyarp
lcp-echo-interval 30
lcp-echo-failure 4
noipx
In case of a message like:
Warning: Could not modify /etc/ppp/pap-secrets: Permission denied
see http://linmodems.technion.ac.il/bigarch/archive-sixth/msg04656.html
Read Modem/DOCs/YourSystem.txt concerning other COMM channels: eth0
Which can interfere with Browser naviagation.
Don't worry about the following, it is for experts should trouble shooting be necessary.
==========================================================
Checking for modem support lines:
--------------------------------------
/device/modem symbolic link:
slmodemd created symbolic link /dev/ttySL0:
Within /etc/udev/ files:
Within /etc/modprobe.conf files:
/etc/modprobe.d/alsa-base-blacklist:# Uncomment these entries in order to blacklist unwanted modem drivers
/etc/modprobe.d/alsa-base-blacklist:# blacklist snd-atiixp-modem
/etc/modprobe.d/alsa-base-blacklist:# blacklist snd-via82xx-modem
/etc/modprobe.d/alsa-base:options snd-atiixp-modem index=-2
/etc/modprobe.d/alsa-base:options snd-via82xx-modem index=-2
Within any ancient /etc/devfs files:
Within ancient kernel 2.4.n /etc/module.conf files:
--------- end modem support lines --------
