Dear all, I have tried Init2 = ATQ0 V1 E1 S0=0 X3 &C1 &D2 =MS=34 And I got Bad Init Line So I Tried Init2 = ATQ0 V1 E1 S0=0 X3 &C1 &D2 +FCLASS=0 When I do #wvdial Telkomnet still get NO CARRIER trying again.. Message I already add the Carrier Check = no and Stupid Mode = yes But when I do wvdial Telkomnet 2>&1, it connected but I can't do any browsing with firefox. I already add Auto DNS = yes What is 2>%1 anyway? So strange ... This is my wvdial.conf: [Dialer Defaults] Init1 = ATZ Init2 = ATQ0 V1 E1 S0=0 X3 &C1 &D2 +FCLASS=0 Modem Type = Analog Modem Modem = /dev/ttySL0 Baud = 460800 ISDN = 0 Auto DNS = yes Carier Check = no Stupid Mode = yes [Dialer Telkomnet] Phone = 080989999 Username = telkomnet@instant Password = telkom And this is my wvdial.out: --> WvDial: Internet dialer version 1.60 Cannot get information for --> serial port. --> Initializing modem. --> Sending: ATZ ATZ OK --> Sending: ATQ0 V1 E1 S0=0 X3 &C1 &D2 +FCLASS=0 ATQ0 V1 E1 S0=0 X3 &C1 &D2 +FCLASS=0 OK --> Modem initialized. --> Sending: ATDT080989999 --> Waiting for carrier. ATDT080989999 CONNECT 32000 ~[7f]}#@!}!t} !}!}$}&@}%}&}8[d[12]}"}&} } } } }#}$@#}3})}#}(} }#}*2d}"}]~ --> Carrier detected. Starting PPP immediately. --> Starting pppd at Wed Jun 25 20:35:38 2008 Pid of pppd: 3037 Using --> interface ppp0 --> pppd: [10]:[0c][08]88[0c][08] --> pppd: [10]:[0c][08]88[0c][08] --> pppd: [10]:[0c][08]88[0c][08] --> pppd: [10]:[0c][08]88[0c][08] --> local IP address 61.94.40.186 --> pppd: [10]:[0c][08]88[0c][08] --> remote IP address 61.94.40.2 --> pppd: [10]:[0c][08]88[0c][08] --> primary DNS address 203.130.196.5 --> pppd: [10]:[0c][08]88[0c][08] --> secondary DNS address 222.124.204.34 --> pppd: [10]:[0c][08]88[0c][08] Thanks, Edison
