I knew that the agrsm code does not support the 11c11040, but I was
looking at the differences and similarites between them. the 11c11040
uses the alsa components
in
/lib/modules/`uname -r`/kernel/char/ and puts in agrmodem and agrserial there,
while the other agrsm creates the
/lib/modules/`uname -r`/kernel/extra/
same name of modules, but they are different. I have seen the
differences. the README files are almost idential. in the first
agrsm-2008???, they recommmend the same thing
make module
make install
but it does not work, while in the 11c11040 it does work. This should
install successfully on one of these linux distributions. I do not
understand why they are kernel dependent since they are using alsa
with HDA?? stuff. They have a
AgereMdmDaemon that loads the modem and its drivers. The insmod of
these drivers fails with the unknown symbols. That is why the package
fails.
The agrsm-2008XXYY code is also difficult to deal with, having to add
codes to make it work. I tried to help a fellow slax user and
everything compiles fine and installs, but the modem is not funtional.
Wvdial does not find it.
If there is a package that I could install that would help resolve the
symbols issue, I will test and it and report back. Otherwise I will
stop here and wait till new drivers emerge or someone else reports
success. I do not worry about the modem myself since I have at least
2 computers that can get me connected to the internet with martian
driver.
Regards,
Antonio
On 6/24/08, Marvin Stodolsky <marvin.stodolsky@xxxxxxxxx> wrote:
> Antonio
>
> agrsm-20080203.tar.gz doesnot have the recognition codes for any of
> the HDA modems
> Within agrsoftmodem.c , only the
>
> const SUPPORTED_DEVICES agereSupDevices[] = {
> { 0x11C1, 0x0620, 0x0000, 0x0000 },
> { 0x1039, 0x7013, 0x0000, 0x0000 },
> { 0x1106, 0x3068, 0x0000, 0x0000 },
> { 0x8086, 0x2416, 0x0000, 0x0000 },
> { 0x8086, 0x2426, 0x0000, 0x0000 },
> { 0x8086, 0x2446, 0x0000, 0x0000 },
> { 0x8086, 0x7196, 0x0000, 0x0000 },
> { 0x8086, 0x2486, 0x0000, 0x0000 },
> { 0x8086, 0x24C6, 0x0000, 0x0000 },
> { 0x8086, 0x24D6, 0x0000, 0x0000 },
> { 0x11C1, 0x048C, 0x0000, 0x0000 },
> { 0x11C1, 0x048F, 0x0000, 0x0000 },
> { 0x8086, 0x266D, 0x0000, 0x0000 },
> and there are no HDA audio cards in this list, which are hosts for
> 11c11040 chips
>
> In contrast, the
>>> http://service.one.de/download/index.php?&direction=0&order=&directory=NOTEBOOKS/ONE_A1xx/Linux%20Drivers/Source-code/Modem
>>>
>>> The agrsoftmodem.c does have HDA support!!!
>>> { 0x8086, 0x2668, 0x0000, 0x0000 }, //ich6 hda
>>> { 0x8086, 0x27D8, 0x0000, 0x0000 }, //ich7 hda
>>> { 0x8086, 0x284B, 0x0000, 0x0000 }, //ich8 hda
>
> MarvS
>
> On Mon, Jun 23, 2008 at 4:36 PM, Antonio Olivares
> <olivares14031@xxxxxxxxx> wrote:
>> I know this is kind of against the rules, but in another attempt to
>> get a working driver other than the redflag kernel,
>>
>> I am tempted/have been tempted to try the AGERE code
>>
>>
>> http://linmodems.technion.ac.il/packages/ltmodem/sv92/agrsm-20080203.tar.gz
>>
>> The above code compiles and is very similar to the one provided in the
>> link by Frank
>>
>> http://service.one.de/download/index.php?&direction=0&order=&directory=NOTEBOOKS/ONE_A1xx/Linux%20Drivers/Source-code/Modem
>>
>> root@slax:~# unzip AGERE\ D40\ 11c1-1040\ src.zip
>> Archive: AGERE D40 11c1-1040 src.zip
>> inflating: src/8250.h
>> inflating: src/AgereMdmDaemon
>> inflating: src/agrinst
>> inflating: src/agrmodem.h
>> inflating: src/agrmodem.mod.c
>> inflating: src/agrmodemlib.o
>> inflating: src/agrserial.mod.c
>> inflating: src/agrsoftmodem.c
>> inflating: src/agruninst
>> inflating: src/agr_auxinst
>> inflating: src/agr_softmodem
>> inflating: src/config.h
>> inflating: src/HDA.c
>> inflating: src/hda_codec.h
>> inflating: src/LICENSE
>> inflating: src/linuxif.h
>> inflating: src/Makefile
>> extracting: src/Module.symvers
>> inflating: src/README
>> inflating: src/serial26.c
>>
>> root@slax:~# tar -zxvf agrsm-20080203.tar.gz
>> agrsm/
>> agrsm/agrsm_core.o
>> agrsm/agrmodemlib.o
>> agrsm/agrsm_howto.txt
>> agrsm/README
>> agrsm/agr.h
>> agrsm/lib.c
>> agrsm/ReadmeUpdate.txt
>> agrsm/agrsoftmodem.c
>> agrsm/8250.h
>> agrsm/agrmodem.h
>> agrsm/agrsm.rules
>> agrsm/linuxif.h
>> agrsm/Makefile
>> agrsm/.#Readme.1st
>> agrsm/LICENSE
>> agrsm/serial26.c
>>
>> I see many things simiilar and many differences as well. The second
>> one agrsm/ here creates the modules and places them in
>> /lib/modules/`uname -r`/extra/ while the first one, the 11c11040 one
>> places them in /lib/modules/`uname -r`/kernel/chars/. The bad thing
>> is that the final step does not succeed :(
>> make install fails in both cases.
>>
>> I tried the agrsm-20080203 just to see what I was going to get and all
>> seemed to be fine, the code compiles, I modprobed agrmodem, and
>> agrserial and then wvdialconf /etc/wvdial.conf did not find the
>> modem. I typed dmesg and I got
>>
>> agrsm: created 0 infos
>> Loading module Agere Modem Controller driver version 2.1.60.0.Linspire
>> (2005-11-16)
>> ttyAGS3 at I/O 0x400 (irq = 3) is a AgereModem
>> agrserial: Loading module Agere Modem Interface driver version
>> 2.1.60.0.Linspire (2005-11-16)
>> BUG: unable to handle kernel NULL pointer dereference at virtual
>> address 00000004
>> printing eip: f9af6e53 *pde = 00000000
>> Oops: 0000 [#1] SMP
>> Modules linked in: agrserial agrmodem(P) sg i915 drm snd_seq_dummy
>> snd_seq_oss snd_seq_midi_event snd_seq snd_seq_device snd_pcm_oss
>> snd_mixer_oss fuse lp parport_pc parport pcspkr wlan_scan_sta
>> ath_rate_sample pcmcia snd_hda_intel snd_pcm snd_timer snd_page_alloc
>> ath_pci snd_hwdep yenta_socket rsrc_nonstatic pcmcia_core tifm_7xx1
>> wlan sdhci mmc_core intel_agp snd tifm_core ath_hal(P) iTCO_wdt
>> pata_acpi ata_generic iTCO_vendor_support video soundcore output
>> agpgart i2c_i801 r8169 serio_raw psmouse evdev aufs squashfs sqlzma
>> unlzma
>>
>> Pid: 26236, comm: wvdial Tainted: P (2.6.24.5 #1)
>> EIP: 0060:[<f9af6e53>] EFLAGS: 00010296 CPU: 1
>> EIP is at LXSoftModemStart+0x23/0x230 [agrmodem]
>> EAX: 00000008 EBX: f9584988 ECX: fffa9000 EDX: f9583500
>> ESI: 00000000 EDI: ee7a9138 EBP: e0823e34 ESP: e0823dac
>> DS: 007b ES: 007b FS: 00d8 GS: 0033 SS: 0068
>> Process wvdial (pid: 26236, ti=e0822000 task=e0fe5540 task.ti=e0822000)
>> Stack: 00000000 00000008 f9b31801 fffffffc 00000001 c141f720 c141f720
>> c141f720
>> c141f720 c015935b 00000001 00000044 00000001 00000044 e0fb9000
>> 00000000
>> 00000000 c08b2d00 00000001 00000000 000280d0 c08b679c 00000202
>> 00000000
>> Call Trace:
>> [<c015935b>] get_page_from_freelist+0x25b/0x3e0
>> [<c015956a>] __alloc_pages+0x5a/0x370
>> [<f9af2426>] linux_modem_open+0x26/0x110 [agrmodem]
>> [<f9a4c4b5>] modemPortOpen+0x5/0x10 [agrmodem]
>> [<f9581ef5>] serial8250_startup+0x1b5/0x2f0 [agrserial]
>> [<c043ac99>] uart_startup+0x49/0x160
>> [<c043c4fa>] uart_open+0xfa/0x410
>> [<c04254f4>] check_tty_count+0x14/0xb0
>> [<c03cfb2f>] kobject_get+0xf/0x20
>> [<c0429443>] tty_open+0x143/0x2e0
>> [<c0429300>] tty_open+0x0/0x2e0
>> [<c0179ce3>] chrdev_open+0xa3/0x190
>> [<c01752af>] __dentry_open+0xbf/0x1c0
>> [<c0175465>] nameidata_to_filp+0x35/0x40
>> [<c0179c40>] chrdev_open+0x0/0x190
>> [<c01754c0>] do_filp_open+0x50/0x60
>> [<f8d3f9e7>] set_h_fptr+0x37/0x60 [aufs]
>> [<c0175162>] get_unused_fd_flags+0x52/0xd0
>> [<c0175520>] do_sys_open+0x50/0xf0
>> [<c01755fc>] sys_open+0x1c/0x20
>> [<c0104352>] syscall_call+0x7/0xb
>> =======================
>> Code: 00 89 d8 eb a7 8d 76 00 55 b8 01 18 b3 f9 89 e5 57 56 53 83 ec
>> 7c 8b 75 08 89 44 24 08 c7 45 e4 78 56 34 12 8d 46 08 89 44 24 04 <8b>
>> 46 04 89 04 24 e8 e2 13 00 00 85 c0 89 c3 0f 88 68 01 00 00
>> EIP: [<f9af6e53>] LXSoftModemStart+0x23/0x230 [agrmodem] SS:ESP
>> 0068:e0823dac
>> ---[ end trace 4d0effe1422cd7f1 ]---
>>
>> They are similar and they are also very different.. This is just an
>> observation and do not expect responses back.
>>
>> /*** removed to save space ***/
>> /root/src/HDA.c:302: warning: unused variable 'CodecAddress'
>> /root/src/HDA.c: In function 'LnxTransferCodecVerbsWrite':
>> /root/src/HDA.c:323: warning: unused variable 'CodecAddress'
>> /root/src/HDA.c: In function 'findHDACodec':
>> /root/src/HDA.c:270: warning: control reaches end of non-void function
>> CC [M] /root/src/serial26.o
>> /root/src/serial26.c: In function 'serial8250_startup':
>> /root/src/serial26.c:1434: warning: assignment from incompatible pointer
>> type
>> /root/src/serial26.c: In function 'serial8250_set_termios':
>> /root/src/serial26.c:1699: warning: passing argument 2 of
>> 'uart_get_baud_rate' from incompatible pointer type
>> /root/src/serial26.c:1699: warning: passing argument 3 of
>> 'uart_get_baud_rate' from incompatible pointer type
>> /root/src/serial26.c: At top level:
>> /root/src/serial26.c:2115: warning: initialization from incompatible
>> pointer type
>> /root/src/serial26.c:2116: warning: initialization from incompatible
>> pointer type
>> /root/src/serial26.c:2123: warning: initialization from incompatible
>> pointer type
>> LD [M] /root/src/agrmodem.o
>> LD [M] /root/src/agrserial.o
>> Building modules, stage 2.
>> MODPOST 2 modules
>> CC /root/src/agrmodem.mod.o
>> LD [M] /root/src/agrmodem.ko
>> CC /root/src/agrserial.mod.o
>> LD [M] /root/src/agrserial.ko
>> make[1]: Leaving directory `/usr/src/linux-2.6.24.5'
>> root@slax:~/src# make install
>> ./agrinst
>> make: execvp: ./agrinst: Permission denied
>> make: *** [install] Error 127
>>
>> This is what I do not understand. Permission denied? I am running as
>> root. :(
>>
>> Regards,
>>
>> Antonio
>>
>
