Predictive diagnostics for card in bus 02:00.0:
Modem chipset detected on
CLASS="Class 0780: 14f1:2f20"
NAME="Communication controller: Conexant HSF 56k Data/Fax Modem"
SUBSYS=14f1:2000
PCIDEV=14f1:2f20
IRQ=11
IDENT=hsfmodem
For candidate modem in: 02:00.0
Class 0780: 14f1:2f20 Communication controller: Conexant HSF 56k
Data/Fax Modem
Primary device ID: 14f1:2f20
Support type needed or chipset: hsfmodem
I have downloaded and run scanmodem as you can see with the output file.
I then went to the dell website as recommended in modemdata.txt, or
one of the other output files. I retrieved the 64bit drivers from there,
got them unpacked and tried to install them but I still have nothing. I
looked into getting the driver from the linuxant site but it seemed to
be the same as on dell's. I am pretty new, so maybe I unpacked it in
the wrong spot or installed it impropperly, or need a 32bit driver.
Any help is greatly appreciated and include as many details about
directory locations and exact commands as possible.
Thanks,
Brad
Only plain text email is forwarded by the Discuss@xxxxxxxxxxxxx List Server,
as HTML can contain viruses. Use as the email Subject Line:
YourName, YourCountry
Welcome to openSUSE 10.3 (X86-64) - Kernel kernel 2.6.22.5-31-default
With this Subject Line cogent experts will be alerted, and useful case names left in the Archive.
YourCountry will enable Country specific guidance. Linux experts in YourCountry
can be found through: http://www.linux.org/groups/index.html.
They will know your Country's modem code, which may be essential for dialup service.
Responses from Discuss@xxxxxxxxxxxxx are sometimes blocked by an Internet Provider mail filters.
So in a day, also check the Archived responses at http://www.linmodems.org
-------------------------- System information ----------------------------
CPU=x86_64,
Welcome to openSUSE 10.3 (X86-64) - Kernel
Linux version 2.6.22.5-31-default (geeko@buildhost) (gcc version 4.2.1 (SUSE Linux)) #1 SMP 2007/09/21 22:29:00 UTC
scanModem update of: 2008_06_05
Some modem drivers can only be used in 32 bit modem on x86_64 systems,
while some others are competent on x86_64 Systems. Cases are:
1) http://linmodems.technion.ac.il/bigarch/archive-seventh/msg03119.html
for the snd-hda-intel audio+modem driver. Also applicable to AC97 modem controllers.
In both cases, 32 bit libraries must be installed to support the slmodemd helper having a precompiled 32 bit component.
2) For USB modems using the slusb.ko driver. 32 bit libraries must be installed to support the slmodemd helper having a precompiled 32 bit component
3) The hsfmodem and hcflinmodem drivers for Conexant chipsest modes are x86_64 competent.
There are no blacklisted modem drivers in /etc/modprobe* files
Attached USB devices are:
ID 045e:0040 Microsoft Corp. Wheel Mouse Optical
ID 058f:9360 Alcor Micro Corp.
USB modems not recognized
For candidate card in slot 02:00.0, firmware information and bootup diagnostics are:
PCI slot PCI ID SubsystemID Name
---------- --------- --------- --------------
02:00.0 14f1:2f20 14f1:2000 Communication controller: Conexant HSF 56k Data/Fax Modem
Modem interrupt assignment and sharing:
--- Bootup diagnostics for card in PCI slot 02:00.0 ----
For candidate card in slot 00:14.2, firmware information and bootup diagnostics are:
PCI slot PCI ID SubsystemID Name
---------- --------- --------- --------------
00:14.2 1002:437b 1462:7248 Audio device: ATI Technologies Inc SB450 HDA Audio
Modem interrupt assignment and sharing:
16: 13994 0 IO-APIC-fasteoi sata_sil, HDA Intel
--- Bootup diagnostics for card in PCI slot 00:14.2 ----
ACPI: PCI Interrupt 0000:00:14.2[A] -> GSI 16 (level, low) -> IRQ 16
ACPI: PCI interrupt for device 0000:00:14.2 disabled
PM: Writing back config space on device 0000:00:14.2 at offset f (was 10a, writing a)
PM: Writing back config space on device 0000:00:14.2 at offset 1 (was 4100006, writing 4100002)
ACPI: PCI Interrupt 0000:00:14.2[A] -> GSI 16 (level, low) -> IRQ 16
The PCI slot 00:14.2 of the modem card may be disabled early in
a bootup process, but then enabled later. If modem drivers load
but the modem is not responsive, read DOCs/Bootup.txt about possible fixes.
Send dmesg.txt along with ModemData.txt to discuss@xxxxxxxxxxxxx
if help is needed.
===== Advanced Linux Sound Architecture (ALSA) diagnostics =====
The ALSA packages provide audio support and also drivers for some modems.
ALSA diagnostics are written during bootup to /proc/asound/ folders.
PCI slot 00:14.2 has a High Definition Audio Card
---ALSA bootup diagnostics ---
The ALSA verion is 1.0.14
The modem cards detected by "aplay -l" are: None
The /proc/asound/pcm file reports:
-----------------------
00-00: ALC861 Analog : ALC861 Analog : playback 1 : capture 2
about /proc/asound/cards:
------------------------
0 [SB ]: HDA-Intel - HDA ATI SB
HDA ATI SB at 0xfdff4000 irq 16
=== Finished firmware and bootup diagnostics, next deducing cogent software. ===
Predictive diagnostics for card in bus 02:00.0:
Modem chipset detected on
CLASS="Class 0780: 14f1:2f20"
NAME="Communication controller: Conexant HSF 56k Data/Fax Modem"
SUBSYS=14f1:2000
PCIDEV=14f1:2f20
IRQ=11
IDENT=hsfmodem
For candidate modem in: 02:00.0
Class 0780: 14f1:2f20 Communication controller: Conexant HSF 56k Data/Fax Modem
Primary device ID: 14f1:2f20
Support type needed or chipset: hsfmodem
For owners of a Dell PCs with Conexant HSF modems, a driver source package with full speed enabled is available, but requires driver compiling. Read DOCs/Conexant.txt
Start at http://www.linuxant.com/drivers/hsf/full for
eventually download of a hsfmodem-7.68.00.07full_k.???.zip package
with ??? the package type (deb, rpm, tar etc)
These packages have compiled drivers but will also compile a driver,
if there is a mismatch between the resident kernel and provided driver.
The generic hsfmodem-7.68.00.07full.tar.gz package only provides compiling support
Read DOCs/Conexant.txt
Writing DOCs/Conexant.txt
Predictive diagnostics for card in bus 00:14.2:
Modem chipset not detected on
CLASS="Class 0403: 1002:437b"
NAME="Audio device: ATI Technologies Inc SB450 HDA Audio "
SUBSYS=1462:7248
PCIDEV=1002:437b
IRQ=16
HDA=1002:437b
SOFT=1002:437b.HDA
High Definition Audio (HDA) cards MAY host a modem chip in their Subsystem,
and many are supported by the ALSA audio+modem driver snd-hda-intel
A modem was not detected on HDA card 1002:437b.
If another modem card is present, then most likely 1002:437b does not host a modem.
If another modem card has not been detected, then possibilities are:
1) A Conexant modem chip is present on 1002:437b, as Conexant chips
are frequently not detectable by ALSA diagnostics
2) The modem may be of the older non-PCI Controller Chipset (hardware) type.
Try detection with Root permission:
wvdialconf /etc/wvdial.conf
For candidate modem in: 00:14.2
Class 0403: 1002:437b Audio device: ATI Technologies Inc SB450 HDA Audio
Primary device ID: 1002:437b
Subsystem PCI_id 1462:7248
Softmodem codec or chipset from diagnostics:
from Archives:
Support type needed or chipset:
Support can likely be achieved through two mutually exclusive alternatives:
1) The hsfmodem software for Conexant chipset modems: Read DOCs/Conexant.txt
The following ALSA alternative CANNOT work with Conexant modems.
2) An ALSA modem driver plus slmodemd. Read DOCs/Smartlink.txt for details, and
to test get the package SLMODEMD.gcc4.2.tar.gz from:
http://linmodems.technion.ac.il/packages/smartlink/
----------------end Softmodem section --------------
Writing DOCs/Smartlink.txt
============ end Smartlink section =====================
Completed candidate modem analyses.
The base of the UDEV device file system is: /dev/.udev
The kernel was compiled with gcc version 4.2.1 and a compiler is not installed
linux-headers-2.6.22.5-31-default resources needed for compiling are not manifestly ready!
If compiling is necessary packages must be installed, providing:
gcc-4.2 kernel-source-2.6.22.5-31-default
If a driver compilation fails, with message including some lack of some FileName.h (stdio.h for example), then
Some additional kernel-header files need installation to /usr/include. The minimal additional packages are libc6-dev
and any of its dependents, under Ubuntu linux-libc-dev
If an alternate ethernet connection is available,
$ apt-get update
$ apt-get -s install linux-kernel-devel
will install needed packages.
For Debian/Ubuntu related distributions, run the following command to display the needed package list:
Otherwise packages have to be found through http://packages.ubuntu.com
Once downloaded and transferred into a Linux partition,
they can be installed alltogether with:
$ sudo dpkg -i *.deb
Checking pppd properties:
-rwxr-xr-x 1 root dialout 347008 2007-09-21 12:51 /usr/sbin/pppd
In case of an "error 17" "serial loopback" problem, see:
http://linmodems.technion.ac.il/linmodems/archive-sixth/msg02637.html
To enable dialout without Root permission do:
$ su - root (not for Ubuntu)
chmod a+x /usr/sbin/pppd
or under Ubuntu related Linuxes
chmod a+x /usr/sbin/pppd
Checking settings of: /etc/ppp/options
noipdefault
noauth
crtscts
lock
modem
asyncmap 0
nodetach
lcp-echo-interval 30
lcp-echo-failure 4
lcp-max-configure 60
lcp-restart 2
idle 600
noipx
file /etc/ppp/filters
In case of a message like:
Warning: Could not modify /etc/ppp/pap-secrets: Permission denied
see http://linmodems.technion.ac.il/bigarch/archive-sixth/msg04656.html
Read Modem/DOCs/YourSystem.txt concerning other COMM channels: eth0
Which can interfere with Browser naviagation.
Don't worry about the following, it is for experts should trouble shooting be necessary.
==========================================================
Checking for modem support lines:
--------------------------------------
/device/modem symbolic link:
slmodemd created symbolic link /dev/ttySL0:
Within /etc/udev/ files:
/etc/udev/rules.d/50-udev-default.rules:KERNEL=="mwave", NAME="modems/%k", GROUP="uucp"
/etc/udev/rules.d/77-network.rules:SUBSYSTEM=="net", ENV{INTERFACE}=="ppp*|ippp*|isdn*|plip*|lo*|irda*|dummy*|ipsec*|tun*|tap*|bond*|vlan*|modem*|dsl*", GOTO="skip_ifup"
Within /etc/modprobe.conf files:
Within any ancient /etc/devfs files:
Within ancient kernel 2.4.n /etc/module.conf files:
--------- end modem support lines --------
