Re: Motorola on Intel HDA

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



Joe

try
Download from http://linmodems.technion.ac.il/packages/smartlink/
the package SLMODEMD.gcc4.1.tar.gz having a compiled slmodemd. Unpack
under Linux with:
   $ tar zxf SLMODEMD.gcc4.1.tar.gz
and read instructions therein. But briefly, the modem is setup with command:
   sudo slmodemd -c ITALY  --alsa hw:0,6
reporting dynamic creation of ports:
  /dev/ttySL0 --> /dev/pts/N   , with N some number
Read Smartlink.txt and Modem/YourSystem.txt for follow through guidance.

MarvS
scanModem maintainer

On Sat, Apr 26, 2008 at 2:03 PM, joe-5@xxxxxxxxx <joe-5@xxxxxxxxx> wrote:
> Please help me with the installation of this modem. For me the operations to
> do are not clear. I've tried everything...
>  ModemData.txt is below.
>  Thanks for your work
>  joe
>
>  Only plain text email is forwarded by the  Discuss@xxxxxxxxxxxxx List
> Server,
>  as HTML can contain viruses. Use as the email Subject Line:
>           YourName, YourCountry  kernel 2.6.22-14-generic
>  With this Subject Line cogent experts will be alerted, and useful case
> names left in the Archive.
>  YourCountry will enable Country specific guidance. Your contry's local
> Linux experts
>  can be found through: http://www.linux.org/groups/index.html.
>  They will know your Country's modem code, which may be essential for dialup
> service.
>  Responses from Discuss@xxxxxxxxxxxxx are sometimes blocked by an Internet
> Provider mail filters.
>  So in a day, also check the Archived responses at http://www.linmodems.org
>  --------------------------  System information ----------------------------
>  CPU=i686,  Linux version 2.6.22-14-generic (buildd@palmer) (gcc version
> 4.1.3 20070929 (prerelease) (Ubuntu 4.1.2-16ubuntu2)) #1 SMP Sun Oct 14
> 23:05:12 GMT 2007
>  scanModem update of:  2008_03_31
>
>  There are no blacklisted modem drivers in /etc/modprobe*  files
>  USB modem not detected by lsusb
>
>  For candidate card in slot 00:1b.0, firmware information and bootup
> diagnostics are:
>  PCI slot    PCI ID        SubsystemID    Name
>  ----------    ---------    ---------    --------------
>  00:1b.0    8086:284b    1043:1339    Audio device: Intel Corporation 82801H
>
>  Modem interrupt assignment and sharing:
>  23:        221        224   IO-APIC-fasteoi   HDA Intel
>  --- Bootup diagnostics for card in PCI slot 00:1b.0 ----
>  [   14.124000] ACPI: PCI Interrupt 0000:00:1b.0[A] -> GSI 22 (level, low)
> -> IRQ 23
>  [   14.124000] PCI: Setting latency timer of device 0000:00:1b.0 to 64
>
>
>  ===== Advanced Linux Sound Architecture (ALSA) diagnostics =====
>  The ALSA packages provide audio support and also drivers for some modems.
>  ALSA diagnostics are written during bootup to /proc/asound/ folders.
>
>  The ALSA verion is 1.0.14
>  The modem cards detected by "aplay -l"  are:
>  scheda 0: Intel [HDA Intel], dispositivo 6: Si3054 Modem [Si3054 Modem]
>
>  The /proc/asound/pcm file reports:
>  -----------------------
>  00-06: Si3054 Modem : Si3054 Modem : playback 1 : capture 1
>  00-00: ALC861VD Analog : ALC861VD Analog : playback 1 : capture 2
>
>  about /proc/asound/cards:
>  ------------------------
>  0 [Intel          ]: HDA-Intel - HDA Intel
>                      HDA Intel at 0xfebf8000 irq 23
>  === Finished firmware and bootup diagnostics, next deducing cogent
> software. ===
>
>  Predictive diagnostics for card in bus 00:1b.0:
>    Modem chipset  detected on
>  CLASS="Class 0403: 8086:284b"
>  NAME="Audio device: Intel Corporation 82801H "
>  PCIDEV=8086:284b
>  SUBSYS=1043:1339
>  IRQ=23
>  HDA=8086:284b
>  SOFT=8086:284b.HDA
>  CHIP=0x10573055
>  IDENT=slmodemd
>  SLMODEMD_DEVICE=hw:0,6
>  Driver=snd-hda-intel
>
>  For candidate modem in:  00:1b.0
>   Class 0403: 8086:284b Audio device: Intel Corporation 82801H
>      Primary PCI_id  8086:284b
>    Subsystem PCI_id  1043:1339
>    Softmodem codec or chipset from diagnostics: 0x10573055
>                               from    Archives:
>                        The HDA card softmodem chip is 0x10573055
>
>  Support type needed or chipset:    slmodemd supporting the snd-hda-intel
> audio+modem driver
>
>  An ALSA (Advanced Linux Sound Architecture) modem driver:  snd-hda-intel
>  provides Low Level support enabling contact with the modem hardware.
>  For all BUT Conexant chip soft modems (using hsfmodem software)
>  complementary High Level support is through a Smartlink utility:  slmodemd
>
>  Download from http://linmodems.technion.ac.il/packages/smartlink/
>  the package SLMODEMD.gcc4.1.tar.gz having a compiled slmodemd. Unpack under
> Linux with:
>     $ tar zxf SLMODEMD.gcc4.1.tar.gz
>  and read instructions therein. But briefly, the modem is setup with
> command:
>     sudo slmodemd -c YOUR_COUNTRY --alsa hw:0,6
>  reporting dynamic creation of ports:
>    /dev/ttySL0 --> /dev/pts/N   , with N some number
>  Read Smartlink.txt and Modem/YourSystem.txt for follow through guidance.
>
>  ----------------end Softmodem section --------------
>
>  USB modem not detected by lsusb
>
>  For candidate card in slot 00:1b.0, firmware information and bootup
> diagnostics are:
>  PCI slot    PCI ID        SubsystemID    Name
>  ----------    ---------    ---------    --------------
>  Writing Intel.txt
>  00:1b.0    8086:284b    1043:1339    Audio device: Intel Corporation 82801H
>
>  Writing Smartlink.txt
>  Modem interrupt assignment and sharing:
>  23:        339        307   IO-APIC-fasteoi   HDA Intel
>  ============ end Smartlink section =====================
>
>  Completed candidate modem analyses.
>
>  The base of the UDEV device file system is: /dev/.udev
>
>  Versions adequately match for the compiler installed: 4.1.3
>             and the compiler used in kernel assembly: 4.1.3
>
>  --- Bootup diagnostics for card in PCI slot 00:1b.0 ----
>  [   14.124000] ACPI: PCI Interrupt 0000:00:1b.0[A] -> GSI 22 (level, low)
> -> IRQ 23
>  [   14.124000] PCI: Setting latency timer of device 0000:00:1b.0 to 64
>
>
>
>  Minimal compiling resources appear complete:
>   make utility - /usr/bin/make
>   Compiler version 4.1
>   linuc_headers base folder /lib/modules/2.6.22-14-generic/build
>
>  However some compilations and executable functions may need additional
> files,
>  in the FileNames.h (so called kernel "h"eaders) collection installed in
> /usr/include/ .
>  For martian_modem, additional required packages are libc6-dev (and for
> Debian/Ubuntu,  linux-libc-dev). The also required headers of package libc6
> are commonly installed by default.
>
>
>
>  If a driver compilation fails, with message including some lack of some
> FileName.h (stdio.h for example), then
>  Some additional kernel-header files need installation to /usr/include. The
> minimal additional packages are libc6-dev
>  and any of its dependents, under Ubuntu linux-libc-dev
>
>  If an alternate ethernet connection is available,
>  $  apt-get update
>  $  apt-get -s install linux-kernel-devel
>  will install needed package
>  For Debian/Ubuntu related distributions, run the following command to
> display the needed package list:
>
>  Otherwise packages have to be found through http://packages.ubuntu.com
>  Once downloaded and transferred into a Linux partition,
>  they can be installed alltogether with:
>  $ sudo dpkg -i *.deb
>
>
>  Checking pppd properties:
>    -rwsr-xr-- 1 root dip 269256 2007-10-04 21:57 /usr/sbin/pppd
>
>  In case of an "error 17" "serial loopback" problem, see:
>    http://linmodems.technion.ac.il/linmodems/archive-sixth/msg02637.html
>
>  To enable dialout without Root permission do:
>    $ su - root  (not for Ubuntu)
>        sudo chmod a+x /usr/sbin/pppd
>  or under Ubuntu related Linuxes
>    sudo chmod a+x /usr/sbin/pppd
>
>  Checking settings of:    /etc/ppp/options
>  asyncmap 0
>  noauth
>  crtscts
>  lock
>  hide-password
>  modem
>  proxyarp
>  lcp-echo-interval 30
>  lcp-echo-failure 4
>  noipx
>
>  In case of a message like:
>   Warning: Could not modify /etc/ppp/pap-secrets: Permission denied
>  see http://linmodems.technion.ac.il/bigarch/archive-sixth/msg04656.html
>
>  Read Modem/YourSystem.txt concerning other COMM channels: eth0
>  Which can interfere with Browser naviagation.
>
>  Don't worry about the following, it is for the experts
>  should trouble shooting be necessary.
>  ==========================================================
>
>  Checking for modem support lines:
>  --------------------------------------
>     /device/modem symbolic link:   slmodemd created symbolic link
> /dev/ttySL0:      Within /etc/udev/ files:
>
>     Within /etc/modprobe.conf files:
>  /etc/modprobe.d/alsa-base:options snd-atiixp-modem index=-2
>  /etc/modprobe.d/alsa-base:options snd-via82xx-modem index=-2
>  /etc/modprobe.d/blacklist-modem:# Uncomment these entries in order to
> blacklist unwanted modem drivers
>  /etc/modprobe.d/blacklist-modem:# blacklist snd-atiixp-modem
>  /etc/modprobe.d/blacklist-modem:# blacklist snd-via82xx-modem
>     Within any ancient /etc/devfs files:
>
>     Within ancient kernel 2.4.n /etc/module.conf files:
>
>  --------- end modem support lines --------
>
>
>  The modem codec file for the the HDA card is: /proc/asound/card0/codec#1
>  --------------------------------------------------------
>  Codec: Motorola Si3054
>  Address: 1
>  Vendor Id: 0x10573055
>  Subsystem Id: 0x10431316
>  Revision Id: 0x100700
>
>  The audio card hosts a softmodem chip:  0x10573055
>
>  The softmodem chip 0x10573055 is in principle supported by the COMM support
> of slmodemd
>  and the joint snd-hda-intel audio+modem driver, begun with ALSA version
> 1.0.13.  For HDA cards with ALC883 chips, an upgrade to ALSA verions 1.0.15
> way be necessary. Instructions for upgrading snd-hda-intel and its dependent
> driver set are at:
> http://linmodems.technion.ac.il/archive-seventh/msg00282.html
>
>  === Finished firmware and bootup diagnostics, next deducing cogent
> software. ===
>
>  Predictive diagnostics for card in bus 00:1b.0:
>    Modem chipset  detected on
>  CLASS="Class 0403: 8086:284b"
>  NAME="Audio device: Intel Corporation 82801H "
>  CLASS="Class 0403: 8086:284b"
>  NAME="Audio device: Intel Corporation 82801H "
>  PCIDEV=8086:284b
>  SUBSYS=1043:1339
>  IRQ=23
>  HDA=8086:284b
>  SOFT=8086:284b.HDA
>  CHIP=0x10573055
>  IDENT=slmodemd
>  SLMODEMD_DEVICE=hw:0,6
>  Driver=snd-hda-intel
>  PCIDEV=8086:284b
>  SUBSYS=1043:1339
>  IRQ=23
>  HDA=8086:284b
>  SOFT=8086:284b.HDA
>  CHIP=0x10573055
>  IDENT=slmodemd
>  SLMODEMD_DEVICE=hw:0,6
>  Driver=snd-hda-intel
>
>  For candidate modem in:  00:1b.0
>   Class 0403: 8086:284b Audio device: Intel Corporation 82801H
>      Primary PCI_id  8086:284b
>    Subsystem PCI_id  1043:1339
>    Softmodem codec or chipset from diagnostics: 0x10573055
>                               from    Archives:
>                        The HDA card softmodem chip is 0x10573055
>
>  Support type needed or chipset:    slmodemd supporting the snd-hda-intel
> audio+modem driver
>
>  An ALSA (Advanced Linux Sound Architecture) modem driver:  snd-hda-intel
>  provides Low Level support enabling contact with the modem hardware.
>  For all BUT Conexant chip soft modems (using hsfmodem software)
>  complementary High Level support is through a Smartlink utility:  slmodemd
>
>  Download from http://linmodems.technion.ac.il/packages/smartlink/
>  the package SLMODEMD.gcc4.1.tar.gz having a compiled slmodemd. Unpack under
> Linux with:
>     $ tar zxf SLMODEMD.gcc4.1.tar.gz
>  and read instructions therein. But briefly, the modem is setup with
> command:
>     sudo slmodemd -c YOUR_COUNTRY --alsa hw:0,6
>  reporting dynamic creation of ports:
>    /dev/ttySL0 --> /dev/pts/N   , with N some number
>  Read Smartlink.txt and Modem/YourSystem.txt for follow through guidance.
>
>  ----------------end Softmodem section --------------
>
>  Writing Intel.txt
>  Writing Smartlink.txt
>  ============ end Smartlink section =====================
>
>  Completed candidate modem analyses.
>
>  The base of the UDEV device file system is: /dev/.udev
>
>  Versions adequately match for the compiler installed: 4.1.3
>             and the compiler used in kernel assembly: 4.1.3
>
>
>
>  Minimal compiling resources appear complete:
>   make utility - /usr/bin/make
>   Compiler version 4.1
>   linuc_headers base folder /lib/modules/2.6.22-14-generic/build
>
>  However some compilations and executable functions may need additional
> files,
>  in the FileNames.h (so called kernel "h"eaders) collection installed in
> /usr/include/ .
>  For martian_modem, additional required packages are libc6-dev (and for
> Debian/Ubuntu,  linux-libc-dev). The also required headers of package libc6
> are commonly installed by default.
>
>
>
>  If a driver compilation fails, with message including some lack of some
> FileName.h (stdio.h for example), then
>  Some additional kernel-header files need installation to /usr/include. The
> minimal additional packages are libc6-dev
>  and any of its dependents, under Ubuntu linux-libc-dev
>
>  If an alternate ethernet connection is available,
>  $  apt-get update
>  $  apt-get -s install linux-kernel-devel
>  will install needed package
>  For Debian/Ubuntu related distributions, run the following command to
> display the needed package list:
>
>  Otherwise packages have to be found through http://packages.ubuntu.com
>  Once downloaded and transferred into a Linux partition,
>  they can be installed alltogether with:
>  $ sudo dpkg -i *.deb
>
>
>  Checking pppd properties:
>    -rwsr-xr-- 1 root dip 269256 2007-10-04 21:57 /usr/sbin/pppd
>
>  In case of an "error 17" "serial loopback" problem, see:
>    http://linmodems.technion.ac.il/linmodems/archive-sixth/msg02637.html
>
>  To enable dialout without Root permission do:
>    $ su - root  (not for Ubuntu)
>        sudo chmod a+x /usr/sbin/pppd
>  or under Ubuntu related Linuxes
>    sudo chmod a+x /usr/sbin/pppd
>
>  Checking settings of:    /etc/ppp/options
>  asyncmap 0
>  noauth
>  crtscts
>  lock
>  hide-password
>  modem
>  proxyarp
>  lcp-echo-interval 30
>  lcp-echo-failure 4
>  noipx
>
>  In case of a message like:
>   Warning: Could not modify /etc/ppp/pap-secrets: Permission denied
>  see http://linmodems.technion.ac.il/bigarch/archive-sixth/msg04656.html
>
>  Read Modem/YourSystem.txt concerning other COMM channels: eth0
>  Which can interfere with Browser naviagation.
>
>  Don't worry about the following, it is for the experts
>  should trouble shooting be necessary.
>  ==========================================================
>
>  Checking for modem support lines:
>  --------------------------------------
>     /device/modem symbolic link:   slmodemd created symbolic link
> /dev/ttySL0:      Within /etc/udev/ files:
>
>     Within /etc/modprobe.conf files:
>  /etc/modprobe.d/alsa-base:options snd-atiixp-modem index=-2
>  /etc/modprobe.d/alsa-base:options snd-via82xx-modem index=-2
>  /etc/modprobe.d/blacklist-modem:# Uncomment these entries in order to
> blacklist unwanted modem drivers
>  /etc/modprobe.d/blacklist-modem:# blacklist snd-atiixp-modem
>  /etc/modprobe.d/blacklist-modem:# blacklist snd-via82xx-modem
>     Within any ancient /etc/devfs files:
>
>     Within ancient kernel 2.4.n /etc/module.conf files:
>
>  --------- end modem support lines --------
>
>

[Index of Archives]     [Linux Media Development]     [Asterisk]     [DCCP]     [Netdev]     [X.org]     [Xfree86]     [Fedora Women]     [Linux USB]

  Powered by Linux