Gary, /usr/sbin/ is the standard position for slmodemd$ slmodemd --versionshould report 2.9.11, as constrasted to the older 2.9.9e packaged inthe sl-modem-daemon package. Scripts installled by sl-modem-daemon should automate: modprobe snd-intel8x0m slmodemd --alsa -c USA modem:1 Check that after bootup /dev/ttySL0 --> /dev/pts/SomeNumberhas been created. If the modem becomes unresponsive$ sudo /etc/iniit.d/sl-modem-daemon restart which just automates removal modprobe -r snd-intel8x0mand restart: modprobe snd-intel8x0m slmodemd --alsa -c USA modem:1 If you want a graphical interface there is a front end gnome-ppp.Install with:$ apt-cache show gnome-ppp$ apt-get update$ apt-get install gnome-pppor just use the aptitute graphocal interface to apt-getUnder its Setup -> Options, uncheck the default Carrier Check MarvS On Fri, Apr 4, 2008 at 2:16 PM, Gary Kaucher <gkaucher@xxxxxxx> wrote:> For some reason the connection speed> appears to be quite good now. And as you> indicated, if I only exit wvdial with Ctrl-C> (and leave slmodemd running), I am able> to wvdial and reconnect just fine.>> I am having trouble finding anything> related to sl-modem-daemon.> And when I search for slmodemd I only> find two locations - /usr/sbin and on my> desktop. Where would I copy my> slmodemd to in order for it to start on> boot. Or is there some way that I could incorporate>>> # modprobe snd-intel8x0m> # slmodemd --alsa -c USA modem:1">> and wvdial into one launcher application?>> Thank you,>> Gary>>>>>>> At 10:31 AM 4/4/08, you wrote:>>> >> >> >> > Too bad that people do not read the instructions.> > For every Linux command, say xyz, the command> > man xyz explains everything with necessary pointers (See Also:) to other> man files. (man = manual, just in case)> > Also, http://linmodems.technion.ac.il starts with an index where Line 11> > (not so far to be read...) points to wvdial usage.> >> > Your modem connects at speed CONNECT 45333 (see wvdial log) which is close> to a theoretical, never achieved, 56k promise.> >> > Slowness in browsing in your case is due to the external world, starting> from your ISP (Internet Service Provider) way to the Web site which you are> trying to browse.> >> > High baud rates such as 460800 or whatever are meaningless for you, they> describe the maximum rate at which the CPU of your computer talks with the> modem chip (roughly speaking for mundane readers).> >> > About> > "> I open up Firefox, and I am able to browse slowly,> > > but at least it works! After I disconnect, I have to> > > do the> > >> > > # modprobe snd-intel8x0m> > > # slmodemd --alsa -c USA modem:1"> >> > How did you disconnect, CTRL-C which stops wvdial or CTRL-C which stops> slmodemd ?> > Stopping wvdial does not stop slmodemd, thus you probably stopped slmodemd> instead.> >> > About:> > " 2)I need an easier way to load slmodem so> > > I can wvdial. Is there some kind of graphical> > > wvdial dialer that is good with Ubuntu 7.10> > > that will load slmodemd first?> > "> > The tool is sl-modem-daemon distributed with Ubuntu 7.10 (remember,> contains a wrong slmodemd, so reinstall the right one after reintroducing> the wrong one).> > To "graphically" load slmodemd you can add a launcher button to your> toolbar using Gnome (right click the bar, add to panel, learn the rest> yourself).> > But again, your problem will become essentially inexisting if you stop> wvdial with CTRL-C, not slmodemd .> >> > I am not an expert in "graphical interfaces" for which I don't care less.> Using it since about its creation, at least 15 years ago, I just type wvdial> in a command line rather than fighting with the mouse.> >> > Jacques> >> >> > Gary Kaucher wrote:> >> > > Jacques,> > > Wonderful! I removed the ; and things are getting better!> > > I added -> > > Carrier check = no> > > Auto DNS = yes> > > Now the wvdial.conf looks like> > > [Dialer Defaults]> > > Init1 = ATZ> > > Init2 = ATQ0 V1 E1 S0=0 &C1 &D2 +FCLASS=0> > > Modem Type = Analog Modem> > > ISDN = 0> > > New PPPD = yes> > > Phone = 1234567891> > > Modem = /dev/ttySL0> > > Username = phoneyusename> > > Carrier check = no> > > Auto DNS = yes> > > Password = phoneypassword> > > Baud = 460800> > > Now if I do> > > # modprobe snd-intel8x0m> > > # slmodemd --alsa -c USA modem:1> > > and I open up another terminal and> > > type> > > $ sudo wvdial> > > I get-> > > WvDial<*1>: WvDial: Internet dialer version 1.56> > > WvModem<*1>: Cannot get information for serial port.> > > WvDial<*1>: Initializing modem.> > > WvDial<*1>: Sending: ATZ> > > WvDial Modem<*1>: ATZ> > > WvDial Modem<*1>: OK> > > WvDial<*1>: Sending: ATQ0 V1 E1 S0=0 &C1 &D2 +FCLASS=0> > > WvDial Modem<*1>: ATQ0 V1 E1 S0=0 &C1 &D2 +FCLASS=0> > > WvDial Modem<*1>: OK> > > WvDial<*1>: Modem initialized.> > > WvDial<*1>: Sending: ATDT1234567891> > > WvDial<*1>: Waiting for carrier.> > > WvDial Modem<*1>: ATDT1234567891> > > WvDial Modem<*1>: CONNECT 45333> > > WvDial<*1>: Carrier detected. Waiting for prompt.> > > WvDial Modem<*1>: Thank you for calling Prolog from PenTeleData> > > WvDial Modem<*1>: http://www.ptd.net> > > WvDial Modem<*1>: For technical support/customer service call> > > WvDial Modem<*1>: 800-804-5783 or send E-Mail to> > > WvDial Modem<*1>: sysop@xxxxxxxxxxxxx> > > WvDial Modem<*1>: All users are subject to PTD policies> > > WvDial Modem<*1>: http://www.ptd.net/Policies.html> > > WvDial Modem<*1>: Login:> > > WvDial Modem<*1>: Username:> > > WvDial<*1>: Looks like a login prompt.> > > WvDial<*1>: Sending: phoneyusername> > > WvDial Modem<*1>: phoneyusername> > > WvDial Modem<*1>: Password:> > > WvDial<*1>: Looks like a password prompt.> > > WvDial<*1>: Sending: (password)> > > WvDial Modem<*1>: .net> ppp: Establishing PPP connection.> > > WvDial Modem<*1>: Connected. Your IP address is 216.144.191.110> > > WvDial Modem<*1>: ~[7f]}#@!}!}!}> }?}!}$}%j}"}&[7f][7f][7f][7f]}%}&cR[0c]"}'}"}(}"}1}$}%j}3}#} Q}+~> > > WvDial<*1>: PPP negotiation detected.> > > WvDial<Notice>: Starting pppd at Fri Apr 4 08:36:38 2008> > > WvDial<Notice>: Pid of pppd: 5929> > > WvDial<*1>: Using interface ppp0> > > WvDial<*1>: pppd: ��[06][08][18]�[06][08]> > > WvDial<*1>: pppd: ��[06][08][18]�[06][08]> > > WvDial<*1>: pppd: ��[06][08][18]�[06][08]> > > WvDial<*1>: local IP address 216.144.191.110> > > WvDial<*1>: pppd: ��[06][08][18]�[06][08]> > > WvDial<*1>: remote IP address 10.7.1.9> > > WvDial<*1>: pppd: ��[06][08][18]�[06][08]> > > WvDial<*1>: primary DNS address 204.186.110.76> > > WvDial<*1>: pppd: ��[06][08][18]�[06][08]> > > WvDial<*1>: secondary DNS address 216.144.187.101> > > WvDial<*1>: pppd: ��[06][08][18]�[06][08]> > > I open up Firefox, and I am able to browse slowly,> > > but at least it works! After I disconnect, I have to> > > do the> > > # modprobe snd-intel8x0m> > > # slmodemd --alsa -c USA modem:1> > > first, if I want to dial out again with wvdial.> > > This does not change if I reboot. So I guess> > > I still need to fine tune a couple of things> > > so slmodemd will load.> > > 1) How can I improve the connection speed?> > > Should I change the BAUD to 115,200? I don't> > > know where the 460800 came from.> > > 2)I need an easier way to load slmodem so> > > I can wvdial. Is there some kind of graphical> > > wvdial dialer that is good with Ubuntu 7.10> > > that will load slmodemd first?> > > 3)I can't hear the modem negotiating. Is there> > > something I should add to wvdial.conf?> > > Thanks for the help!> > > Gary> > >> > >> > >> > >> > > > Gary,> > > >> > > > Either send us your file /etc/wvdial.conf AFTER ERASING OR HIDING THE> PASSWORD (what you added on the right side of Password = )> > > > or edit your file so that the phone, name and password look like, in> MY case:> > > >> > > > Phone = 048359769> > > > Username = goldberg> > > > Password = goodnews> > > >> > > > Any line in /etc/wvdial.conf starting with ; is IGNORED.> > > >> > > > Also remember that there must be in /etc/wvdial.conf a line> > > > Carrier Check = no> > > >> > > > ; Phone = <Target Phone Number>> > > > ; Username = <Your Login Name>> > > > ; Password = <Your Password>> > > >> > > >> > > > (anywhere in the file)> > > >> > > > Jacques> > > >> > > > Gary Kaucher wrote:> > > >> > > > > Antonio & Jacques-> > > > >> > > > ; Phone = <Target Phone Number>> > > > ; Username = <Your Login Name>> > > > ; Password = <Your Password>> > > >> > > >> > > >> > > > > After installing the modem I was hitting "Ctrl + C"> > > > > and I must have been turning slmodemd off.> > > > > The modem still does not dial, but "maybe" I> > > > > am getting closer. Now instead of doing Ctrl + C> > > > > I open up another terminal and when I type> > > > > $ sudo wvdialconf /etc/wvdial.conf> > > > > I get-> > > > > Scanning your serial ports for a modem.> > > > > Modem Port Scan<*1>: S0 S1 S2 S3> > > > > WvModem<*1>: Cannot get information for serial port.> > > > > ttySL0<*1>: ATQ0 V1 E1 -- OK> > > > > ttySL0<*1>: ATQ0 V1 E1 Z -- OK> > > > > ttySL0<*1>: ATQ0 V1 E1 S0=0 -- OK> > > > > ttySL0<*1>: ATQ0 V1 E1 S0=0 &C1 -- OK> > > > > ttySL0<*1>: ATQ0 V1 E1 S0=0 &C1 &D2 -- OK> > > > > ttySL0<*1>: ATQ0 V1 E1 S0=0 &C1 &D2 +FCLASS=0 -- OK> > > > > ttySL0<*1>: Modem Identifier: ATI -- SmartLink Soft Modem> > > > > ttySL0<*1>: Speed 4800: AT -- OK> > > > > ttySL0<*1>: Speed 9600: AT -- OK> > > > > ttySL0<*1>: Speed 19200: AT -- OK> > > > > ttySL0<*1>: Speed 38400: AT -- OK> > > > > ttySL0<*1>: Speed 57600: AT -- OK> > > > > ttySL0<*1>: Speed 115200: AT -- OK> > > > > ttySL0<*1>: Speed 230400: AT -- OK> > > > > ttySL0<*1>: Speed 460800: AT -- OK> > > > > ttySL0<*1>: Max speed is 460800; that should be safe.> > > > > ttySL0<*1>: ATQ0 V1 E1 S0=0 &C1 &D2 +FCLASS=0 -- OK> > > > > Found a modem on /dev/ttySL0.> > > > > Modem configuration written to /etc/wvdial.conf.> > > > > ttySL0<Info>: Speed 460800; init "ATQ0 V1 E1 S0=0 &C1 &D2 +FCLASS=0"> > > > >> > > > > And when I type> > > > > $ sudo wvdial> > > > > I get-> > > > > WvDial<*1>: WvDial: Internet dialer version 1.56> > > > > WvModem<*1>: Cannot get information for serial port.> > > > > WvDial<*1>: Initializing modem.> > > > > WvDial<*1>: Sending: ATZ> > > > > WvDial Modem<*1>: ATZ> > > > > WvDial Modem<*1>: OK> > > > > WvDial<*1>: Sending: ATQ0 V1 E1 S0=0 &C1 &D2 +FCLASS=0> > > > > WvDial Modem<*1>: ATQ0 V1 E1 S0=0 &C1 &D2 +FCLASS=0> > > > > WvDial Modem<*1>: OK> > > > > WvDial<*1>: Modem initialized.> > > > > WvDial<Err>: Configuration does not specify a valid phone number.> > > > > WvDial<Err>: Configuration does not specify a valid login name.> > > > > WvDial<Err>: Configuration does not specify a valid password.> > > > > So I typed "wvdialconf", filled in the phone number, login name, and> > > > > password, and saved the file. But when I did "wvdial" I still got> the same> > > > > response as above. Is there some trick to saving the file, or is> there more than> > > > > one wvdialconf?> > > > > Thanks for help. I am new at Linux.> > > > > Gary> > > > >> > > > >> > > > > Antonio-> > > > > .... and when I run> > > > > $ sudo wvdial> > > > > I get-> > > > > "WvDial<*1>: WvDial: Internet dialer version 1.56> > > > > WvDial<Err>: Cannot open /dev/modem: No such file or directory> > > > > WvDial<Err>: Cannot open /dev/modem: No such file or directory> > > > > WvDial<Err>: Cannot open /dev/modem: No such file or directory> > > > > Thanks,> > > > > Gary> > > > >> > > > > Antonio-> > > > > When I run> > > > > $ sudo wvdialconf /etc/wvdial.conf> > > > > I get-> > > > > "Scanning your serial ports for a modem.> > > > > Modem Port Scan <*1>: S0 S1 S2 S3> > > > > Sorry no modem detected! Is it> > > > > in use in another program? Did you> > > > > properly configure it with setserial?"> > > > >> > > > > Thanks for response,> > > > > Gary> > > > > PS - Notebook is dual boot (XP and Ubuntu).> > > > >> > > > >> > > > >> > > > >> > > > > > Gary,> > > > > >> > > > > > Everything is apparently ok. Instead of trying out GnomePPP, why> not> > > > > > use directly wvdial. It should find the modem port /dev/ttySL0> > > > > >> > > > > > $ sudo wvdialconf /etc/wvdial.conf> > > > > >> > > > > > should find the modem. Edit username, password and phone number> to> > > > > > dial, add a line "Carrier Check = no" to this file and try to> connect> > > > > > using the command line wvdial. What messages do you see? If you> can> > > > > > get a solid connection, then you may then alter your Gnome-ppp and> > > > > > connect using it, but first use the old tried and true wvdial.> > > > > >> > > > > > Regards,> > > > > >> > > > > > Antonio> > > > > >> > > > > > On 4/3/08, Gary Kaucher <gkaucher@xxxxxxx> wrote:> > > > > > > I recently installed Ubuntu 7.10 (Gutsy Gibbon) on a Toshiba> Satellite> > > > > > > M55-S3314 notebook and I am attempting to get the modem working.> Please see> > > > > > > the System Information provided by ScanTool below. I followed> the advice of> > > > > > > ScanTool , downloaded and unpacked SLMODEMD.gcc4.1.tar.gz. and> then I> > > > > > > followed the advice of the 1st_Read.txt that was created and I> did:> > > > > > >> > > > > > > # su - root> > > > > > > # chmod a+x slmodemd> > > > > > > # cp slmodemd /usr/sbin> > > > > > >> > > > > > > I then inserted an ALSA modem driver:> > > > > > >> > > > > > > # modprobe snd-intel8x0m> > > > > > > # slmodemd --alsa -c USA modem:1> > > > > > >> > > > > > > and got the message> > > > > > >> > > > > > > "SmartLink Soft Modem version 2.9.11Feb 17,2008> > > > > > > Symbolic link '/dev/ttySL0' --> '/dev/pts/1 created.> > > > > > > modem 'modem:1' created. TTY is '/dev/pts/1'> > > > > > > Use '/dev/ttySL0' as modem device.> > > > > > >> > > > > > > I thought it was successful, but after configuring the Gnome-ppp> > > > > > > dialer using pppconfig, nothing at all happens when I try to> dial> > > > > > > out, even when I try other ports.> > > > > > >> > > > > > > I notice that there were other slmodemd executables that were> included> > > > > > > in the SLMODEMD.gcc4.1 folder. Since Ubuntu is a Debian related> > > > > > > distro should I have used one of them instead?> > > > > > >> > > > > > >> > > > > > >> > > > > > > Here are the ScanTool results:> > > > > > >> > > > > > >> > > > > > > ------------------------- System information> ----------------------------> > > > > > > CPU=i686,> > > > > > > Linux version 2.6.22-14-generic (buildd@palmer) (gcc version> 4.1.3 20070929> > > > > > > (prerelease) (Ubuntu 4.1.2-16ubuntu2)) #1 SMP Sun Oct 14> 23:05:12 GMT 2007> > > > > > > scanModem update of: 2008_03_31> > > > > > > There are no blacklisted modem drivers in /etc/modprobe* files> > > > > > > USB modem not detected by lsusb> > > > > > > For candidate card in slot 00:1e.3, firmware information and> bootup> > > > > > > diagnostics are:> > > > > > > PCI slot PCI ID SubsystemID Name> > > > > > > ---------- --------- --------- --------------> > > > > > > 00:1e.3 8086:266d 1179:0001 Modem: Intel> Corporation> > > > > > > 82801FB/FBM/FR/FW/FRW> > > > > > > Modem interrupt assignment and sharing:> > > > > > > --- Bootup diagnostics for card in PCI slot 00:1e.3 ----> > > > > > > [ 10.302362] ACPI: PCI Interrupt 0000:00:1e.3[B] -> GSI 20> (level, low) ->> > > > > > > IRQ 18> > > > > > > [ 10.302373] ACPI: PCI interrupt for device 0000:00:1e.3> disabled> > > > > > > The PCI slot 00:1e.3 of the modem card may be disabled early in> > > > > > > a bootup process, but then enabled later. If modem drivers> load> > > > > > > but the modem is not responsive, read Bootup.txt about> possible fixes.> > > > > > > Send dmesg.txt along with ModemData.txt to> discuss@xxxxxxxxxxxxx> > > > > > > if help is needed.> > > > > > >> > > > > > >> > > > > > > ===== Advanced Linux Sound Architecture (ALSA) diagnostics =====> > > > > > > The ALSA packages provide audio support and also drivers for> some modems.> > > > > > > ALSA diagnostics are written during bootup to /proc/asound/> folders.> > > > > > > The ALSA verion is 1.0.14> > > > > > > The modem cards detected by "aplay -l" are:> > > > > > >> > > > > > > The /proc/asound/pcm file reports:> > > > > > > -----------------------> > > > > > > 00-04: Intel ICH - IEC958 : Intel ICH6 - IEC958 : playback 1> > > > > > > 00-03: Intel ICH - ADC2 : Intel ICH6 - ADC2 : capture 1> > > > > > > 00-02: Intel ICH - MIC2 ADC : Intel ICH6 - MIC2 ADC : capture 1> > > > > > > 00-01: Intel ICH - MIC ADC : Intel ICH6 - MIC ADC : capture 1> > > > > > > 00-00: Intel ICH : Intel ICH6 : playback 1 : capture 1> > > > > > > about /proc/asound/cards:> > > > > > > ------------------------> > > > > > > 0 [ICH6 ]: ICH4 - Intel ICH6> > > > > > > Intel ICH6 with ALC250 at irq 16> > > > > > > === Finished firmware and bootup diagnostics, next deducing> cogent software.> > > > > > > ===> > > > > > > Predictive diagnostics for card in bus 00:1e.3:> > > > > > > Modem chipset detected on> > > > > > > CLASS="Class 0703: 8086:266d"> > > > > > > NAME="Modem: Intel Corporation 82801FB/FBM/FR/FW/FRW "> > > > > > > PCIDEV=8086:266d> > > > > > > SUBSYS=1179:0001> > > > > > > IRQ=18> > > > > > > SOFT=8086:266d.MC97> > > > > > > CodecArchived=SIL27> > > > > > > IDENT=slmodemd> > > > > > > SLMODEMD_DEVICE=modem:1> > > > > > > Driver=snd-intel8x0m> > > > > > > For candidate modem in: 00:1e.3> > > > > > > Class 0703: 8086:266d Modem: Intel Corporation> 82801FB/FBM/FR/FW/FRW> > > > > > > Primary PCI_id 8086:266d> > > > > > > Subsystem PCI_id 1179:0001> > > > > > > Softmodem codec or chipset from diagnostics:> > > > > > > from Archives: SIL27, an> LSI/AgereSystems> > > > > > > type> > > > > > >> > > > > > >> > > > > > > Support type needed or chipset: slmodemd> > > > > > > An ALSA (Advanced Linux Sound Architecture) modem driver:> > > > > > snd-intel8x0m> > > > > > > provides Low Level support enabling contact with the modem> hardware.> > > > > > > For all BUT Conexant chip soft modems (using hsfmodem software)> > > > > > > complementary High Level support is through a Smartlink> utility:> > > > > > slmodemd> > > > > > > Download from> > > > > > > http://linmodems.technion.ac.il/packages/smartlink/> > > > > > > the package SLMODEMD.gcc4.1.tar.gz having a compiled slmodemd.> Unpack under> > > > > > > Linux with:> > > > > > > $ tar zxf SLMODEMD.gcc4.1.tar.gz> > > > > > > and read instructions therein. But briefly, the modem is setup> with> > > > > > > command:> > > > > > > sudo slmodemd -c YOUR_COUNTRY --alsa modem:1> > > > > > > reporting dynamic creation of ports:> > > > > > > /dev/ttySL0 --> /dev/pts/N , with N some number> > > > > > > Read Smartlink.txt and Modem/YourSystem.txt for follow through> guidance.> > > > > > > ----------------end Softmodem section --------------> > > > > > > Writing Intel.txt> > > > > > > Writing Smartlink.txt> > > > > > > ============ end Smartlink section =====================> > > > > > > Completed candidate modem analyses.> > > > > > > The base of the UDEV device file system is: /dev/.udev> > > > > > > Versions adequately match for the compiler installed: 4.1.3> > > > > > > and the compiler used in kernel assembly: 4.1.3> > > > > > >> > > > > > >> > > > > > > Minimal compiling resources appear complete:> > > > > > > make utility - /usr/bin/make> > > > > > > Compiler version 4.1> > > > > > > linuc_headers base folder> > > > > > > /lib/modules/2.6.22-14-generic/build> > > > > > > However some compilations and executable functions may need> additional> > > > > > > files,> > > > > > > in the FileNames.h (so called kernel "h"eaders) collection> installed in> > > > > > > /usr/include/ .> > > > > > > For martian_modem, additional required packages are libc6-dev> (and for> > > > > > > Debian/Ubuntu, linux-libc-dev). The also required headers of> package libc6> > > > > > > are commonly installed by default.> > > > > > >> > > > > > > If a driver compilation fails, with message including some lack> of some> > > > > > > FileName.h (stdio.h for example), then> > > > > > > Some additional kernel-header files need installation to> /usr/include. The> > > > > > > minimal additional packages are libc6-dev> > > > > > > and any of its dependents, under Ubuntu linux-libc-dev> > > > > > > If an alternate ethernet connection is available,> > > > > > > $ apt-get update> > > > > > > $ apt-get -s install linux-kernel-devel> > > > > > > will install needed package> > > > > > > For Debian/Ubuntu related distributions, run the following> command to> > > > > > > display the needed package list:> > > > > > > Otherwise packages have to be found through> http://packages.ubuntu.com> > > > > > > Once downloaded and transferred into a Linux partition,> > > > > > > they can be installed alltogether with:> > > > > > > $ sudo dpkg -i *.deb> > > > > > >> > > > > > > Checking pppd properties:> > > > > > > -rwsr-xr-- 1 root dip 269256 2007-10-04 15:57> /usr/sbin/pppd> > > > > > > In case of an "error 17" "serial loopback" problem, see:> > > > > > >> > > > > > >> http://linmodems.technion.ac.il/linmodems/archive-sixth/msg02637.html> > > > > > > To enable dialout without Root permission do:> > > > > > > $ su - root (not for Ubuntu)> > > > > > > sudo chmod a+x /usr/sbin/pppd> > > > > > > or under Ubuntu related Linuxes> > > > > > > sudo chmod a+x /usr/sbin/pppd> > > > > > > Checking settings of: /etc/ppp/options> > > > > > > asyncmap 0> > > > > > > noauth> > > > > > > crtscts> > > > > > > lock> > > > > > > hide-password> > > > > > > modem> > > > > > > proxyarp> > > > > > > lcp-echo-interval 30> > > > > > > lcp-echo-failure 4> > > > > > > noipx> > > > > > > In case of a message like:> > > > > > > Warning: Could not modify /etc/ppp/pap-secrets: Permission> denied> > > > > > > see> > > > > > >> http://linmodems.technion.ac.il/bigarch/archive-sixth/msg04656.html> > > > > > > Read Modem/YourSystem.txt concerning other COMM channels: eth0> eth1> > > > > > > eth0:avah> > > > > > > Which can interfere with Browser naviagation.> > > > > > > Don't worry about the following, it is for the experts> > > > > > > should trouble shooting be necessary.> > > > > > > ==========================================================> > > > > > > Checking for modem support lines:> > > > > > > --------------------------------------> > > > > > > /device/modem symbolic link:> > > > > > > slmodemd created symbolic link /dev/ttySL0:> > > > > > > Within /etc/udev/ files:> > > > > > > Within /etc/modprobe.conf files:> > > > > > > /etc/modprobe.d/blacklist-modem:# Uncomment these entries> > > > > > > in order to blacklist unwanted modem drivers> > > > > > > /etc/modprobe.d/blacklist-modem:# blacklist> > > > > > > snd-atiixp-modem> > > > > > > /etc/modprobe.d/blacklist-modem:# blacklist> > > > > > > snd-via82xx-modem> > > > > > > /etc/modprobe.d/alsa-base:options snd-atiixp-modem index=-2> > > > > > > /etc/modprobe.d/alsa-base:options snd-via82xx-modem> > > > > > > index=-2> > > > > > > Within any ancient /etc/devfs files:> > > > > > > Within ancient kernel 2.4.n /etc/module.conf files:> > > > > > > --------- end modem support lines --------> > > > > > >> > > > > > >> > > > > > >> > > > > > >> > > > > > >> > > > > > >> > > > > > >> > > > > > >> > > > > > >> > > > > > >> > > > > > >> > > > > > >> > > > > > >> > > > > > >> > > > > > >> > > > > > >> > > > > > >> > > > > > >> > > > > > >> > > > > > >> > > > > > > --> > > > > > > No virus found in this outgoing message.> > > > > > > Checked by AVG Free Edition. Version: 7.5.516 / Virus Database:> > > > > > > 269.22.1/1349 - Release Date: 3/29/08 5:02 PM> > > > > > >> > > > > > >> > > > > > >> > > > > >> > > > > >> > > > > >> > > > > > --> > > > > > No virus found in this incoming message.> > > > > > Checked by AVG Free Edition.> > > > > > Version: 7.5.516 / Virus Database: 269.22.1/1349 - Release Date:> 3/29/08 5:02 PM> > > > > >> > > > > >> > > > > >> > > > > >> > > > > > --> > > > > > No virus found in this incoming message.> > > > > > Checked by AVG Free Edition.> > > > > > Version: 7.5.516 / Virus Database: 269.22.1/1349 - Release Date:> 3/29/08 5:02 PM> > > > > >> > > > >> > > >> > > >> > > >> > > > --> > > > No virus found in this incoming message.> > > > Checked by AVG Free Edition. Version: 7.5.516 / Virus Database:> 269.22.1/1349 - Release Date: 3/29/08 5:02 PM> > > >> > > >> > > >> > > >> > > > --> > > > No virus found in this incoming message.> > > > Checked by AVG Free Edition. Version: 7.5.516 / Virus Database:> 269.22.1/1349 - Release Date: 3/29/08 5:02 PM> > > >> > >> >> >> >> > --> >> > No virus found in this incoming message.> > Checked by AVG Free Edition. Version: 7.5.516 / Virus Database:> 269.22.1/1349 - Release Date: 3/29/08 5:02 PM> >> >> >> >> > --> > No virus found in this incoming message.> > Checked by AVG Free Edition. Version: 7.5.516 / Virus Database:> 269.22.1/1349 - Release Date: 3/29/08 5:02 PM> >>>> -->> No virus found in this outgoing message.> Checked by AVG Free Edition. Version: 7.5.516 / Virus Database:> 269.22.1/1349 - Release Date: 3/29/08 5:02 PM>>>
