New Case Only

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



scanModem.2008033106

===================================
Modem: Intel Corporation 82801EB/ER

 This is a NEW softmodem case!  Please send the output ModemData.txt 
 to DISCUSS@xxxxxxxxxxxxx to enrich the Archive and help others! 
================================================================

Attachment: ModemData.txt, 8.7 KB

-- 
Paule V. Moskaleff <moskaleff@xxxxxxx>
 Only plain text email is forwarded by the  Discuss@xxxxxxxxxxxxx List Server,
 as HTML can contain viruses. Use as the email Subject Line:
           YourName, YourCountry  kernel 2.6.20-15-generic 
 With this Subject Line cogent experts will be alerted, and useful case names left in the Archive.
 YourCountry will enable Country specific guidance. Your contry's local Linux experts
 can be found through: http://www.linux.org/groups/index.html. 
They will know your Country's modem code, which may be essential for dialup service.
Responses from Discuss@xxxxxxxxxxxxx are sometimes blocked by an Internet Provider mail filters.
 So in a day, also check the Archived responses at http://www.linmodems.org 
--------------------------  System information ----------------------------
CPU=i686,  
Linux version 2.6.20-15-generic (root@palmer) (gcc version 4.1.2 (Ubuntu 4.1.2-0ubuntu4)) #2 SMP Sun Apr 15 07:36:31 UTC 2007
 scanModem update of:  2008_03_31

 There are no blacklisted modem drivers in /etc/modprobe*  files 
USB modem not detected by lsusb

For candidate card in slot 00:1f.6, firmware information and bootup diagnostics are:
 PCI slot	PCI ID		SubsystemID	Name
 ----------	---------	---------	--------------
 00:1f.6	8086:24d6	1584:400b	Modem: Intel Corporation 82801EB/ER 

 Modem interrupt assignment and sharing: 
 16:       6517   IO-APIC-fasteoi   yenta, Intel ICH5, Intel ICH5 Modem
 --- Bootup diagnostics for card in PCI slot 00:1f.6 ----
[   25.190514] ACPI: PCI Interrupt 0000:00:1f.6[B] -> GSI 17 (level, low) -> IRQ 16
[   25.190526] ACPI: PCI interrupt for device 0000:00:1f.6 disabled
[15261.299110] ACPI: PCI Interrupt 0000:00:1f.6[B] -> GSI 17 (level, low) -> IRQ 16
[15261.299273] PCI: Setting latency timer of device 0000:00:1f.6 to 64

 The PCI slot 00:1f.6 of the modem card may be disabled early in 
 a bootup process,  but then enabled later. If modem drivers load 
 but the  modem is not responsive, read Bootup.txt about possible fixes.
 Send dmesg.txt along with ModemData.txt to discuss@xxxxxxxxxxxxx
 if help is needed.
 


===== Advanced Linux Sound Architecture (ALSA) diagnostics ===== 
The ALSA packages provide audio support and also drivers for some modems.
ALSA diagnostics are written during bootup to /proc/asound/ folders.

The ALSA verion is 1.0.13
The modem cards detected by "aplay -l"  are:
каÑ?Ñ?а 1: Modem [Intel ICH5 Modem], Ñ?Ñ?Ñ?Ñ?ойÑ?Ñ?во 0: Intel ICH - Modem [Intel ICH5 Modem - Modem]

The /proc/asound/pcm file reports:
-----------------------
00-04: Intel ICH - IEC958 : Intel ICH5 - IEC958 : playback 1
00-03: Intel ICH - ADC2 : Intel ICH5 - ADC2 : capture 1
00-02: Intel ICH - MIC2 ADC : Intel ICH5 - MIC2 ADC : capture 1
00-01: Intel ICH - MIC ADC : Intel ICH5 - MIC ADC : capture 1
00-00: Intel ICH : Intel ICH5 : playback 1 : capture 1
01-00: Intel ICH - Modem : Intel ICH5 Modem - Modem : playback 1 : capture 1

about /proc/asound/cards:
------------------------
 0 [ICH5           ]: ICH4 - Intel ICH5
                      Intel ICH5 with VIA1612A at 0xffeff800, irq 16
 1 [Modem          ]: ICH-MODEM - Intel ICH5 Modem
                      Intel ICH5 Modem at 0xe400, irq 16

The driver snd-intel8x0m with its dependent drivers:
snd_intel8x0m          18700  0 
snd_ac97_codec         98336  2 snd_intel8x0m,snd_intel8x0
snd_pcm                79876  4 snd_intel8x0m,snd_intel8x0,snd_ac97_codec,snd_pcm_oss
snd                    54020  13 snd_intel8x0m,snd_intel8x0,snd_ac97_codec,snd_pcm_oss,snd_mixer_oss,snd_pcm,snd_seq_oss,snd_rawmidi,snd_seq,snd_timer,snd_seq_device
snd_page_alloc         10888  3 snd_intel8x0m,snd_intel8x0,snd_pcm
----------
provide modem + audio support.

Lines in: /proc/asound/card1/codec97#0/mc97#1-1+regs
-------------------------------
0:7c = 5349  and  0:7e = 4c22
are translated from hexadecimal code into the modem chip identifier:  SIL22

=== Finished firmware and bootup diagnostics, next deducing cogent software. ===

Predictive diagnostics for card in bus 00:1f.6:
	Modem chipset  detected on
CLASS="Class 0703: 8086:24d6"
NAME="Modem: Intel Corporation 82801EB/ER "
PCIDEV=8086:24d6
SUBSYS=1584:400b
IRQ=16
SOFT=8086:24d6.MC97
CodecDiagnosed=SIL22
CodecClass=SIL
IDENT=slmodemd
SLMODEMD_DEVICE=modem:1
Driver=snd-intel8x0m

 For candidate modem in:  00:1f.6
   Class 0703: 8086:24d6 Modem: Intel Corporation 82801EB/ER
      Primary PCI_id  8086:24d6
    Subsystem PCI_id  1584:400b 
    Softmodem codec or chipset from diagnostics: SIL22, a Smartlink type
                               from    Archives: 
                        
      

 This is a NEW softmodem case!  Please send the output ModemData.txt 
 to DISCUSS@xxxxxxxxxxxxx to enrich the Archive and help others!
 If further assistance is not needed, please use email Subject:
     New Case Only
 -------------------------------------------
Support type needed or chipset:	slmodemd

 An ALSA (Advanced Linux Sound Architecture) modem driver:  snd-intel8x0m
 provides Low Level support enabling contact with the modem hardware.
 For all BUT Conexant chip soft modems (using hsfmodem software)
 complementary High Level support is through a Smartlink utility:  slmodemd

 Download from http://linmodems.technion.ac.il/packages/smartlink/ 
 the package SLMODEMD.gcc4.1.tar.gz having a compiled slmodemd. Unpack under Linux with:
 	$ tar zxf SLMODEMD.gcc4.1.tar.gz
 and read instructions therein. But briefly, the modem is setup with command:
 	sudo slmodemd -c YOUR_COUNTRY --alsa modem:1
 reporting dynamic creation of ports:
	/dev/ttySL0 --> /dev/pts/N   , with N some number
 Read Smartlink.txt and Modem/YourSystem.txt for follow through guidance.

----------------end Softmodem section --------------

Writing Intel.txt
Writing Smartlink.txt
============ end Smartlink section =====================

 Completed candidate modem analyses.

 The base of the UDEV device file system is: /dev/.udev

 Versions adequately match for the compiler installed: 4.1.2
             and the compiler used in kernel assembly: 4.1.2


 
 Minimal compiling resources appear complete:
   make utility - /usr/bin/make
   Compiler version 4.1
   linuc_headers base folder /lib/modules/2.6.20-15-generic/build

 However some compilations and executable functions may need additional files,
 in the FileNames.h (so called kernel "h"eaders) collection installed in  /usr/include/ .
 For martian_modem, additional required packages are libc6-dev (and for Debian/Ubuntu,  linux-libc-dev). The also required headers of package libc6 are commonly installed by default. 



If a driver compilation fails, with message including some lack of some FileName.h (stdio.h for example), then
Some additional kernel-header files need installation to /usr/include. The minimal additional packages are libc6-dev
and any of its dependents, under Ubuntu linux-libc-dev

If an alternate ethernet connection is available,
$  apt-get update
$  apt-get -s install linux-kernel-devel
will install needed package
For Debian/Ubuntu related distributions, run the following command to display the needed package list:

Otherwise packages have to be found through http://packages.ubuntu.com
Once downloaded and transferred into a Linux partition,
they can be installed alltogether with:
$ sudo dpkg -i *.deb


Checking pppd properties:
	-rwsr-xr-- 1 root dip 269224 2007-04-05 07:41 /usr/sbin/pppd

In case of an "error 17" "serial loopback" problem, see:
    http://linmodems.technion.ac.il/linmodems/archive-sixth/msg02637.html

To enable dialout without Root permission do:
	$ su - root  (not for Ubuntu)
        sudo chmod a+x /usr/sbin/pppd
or under Ubuntu related Linuxes
	sudo chmod a+x /usr/sbin/pppd

Checking settings of:	/etc/ppp/options
asyncmap 0
noauth
crtscts
lock
hide-password
modem
proxyarp
lcp-echo-interval 30
lcp-echo-failure 4
noipx

In case of a message like:
   Warning: Could not modify /etc/ppp/pap-secrets: Permission denied
see http://linmodems.technion.ac.il/bigarch/archive-sixth/msg04656.html

Read Modem/YourSystem.txt concerning other COMM channels: eth0
Which can interfere with Browser naviagation.

 Don't worry about the following, it is for the experts
 should trouble shooting be necessary.
==========================================================

 Checking for modem support lines:
 --------------------------------------
     /device/modem symbolic link:   
slmodemd created symbolic link /dev/ttySL0:  
     Within /etc/udev/ files:

     Within /etc/modprobe.conf files:
/etc/modprobe.d/alsa-base:options snd-atiixp-modem index=-2
/etc/modprobe.d/alsa-base:options snd-via82xx-modem index=-2
/etc/modprobe.d/blacklist-modem:# Uncomment these entries in order to blacklist unwanted modem drivers
/etc/modprobe.d/blacklist-modem:# blacklist snd-atiixp-modem
/etc/modprobe.d/blacklist-modem:# blacklist snd-via82xx-modem
     Within any ancient /etc/devfs files:

     Within ancient kernel 2.4.n /etc/module.conf files:

--------- end modem support lines --------


[Index of Archives]     [Linux Media Development]     [Asterisk]     [DCCP]     [Netdev]     [X.org]     [Xfree86]     [Fedora Women]     [Linux USB]

  Powered by Linux