LALLEMAND, FRANCE, kernel 2.6.22-14-generic (laptop PC)

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



Hello !

I have difficulties for connecting my modem.

Could you help me please ?

Here is the transcription of ModemData.txt :

Only plain text email is forwarded by the Discuss@xxxxxxxxxxxxx List Server,
 as HTML can contain viruses. Use as the email Subject Line:
           YourName, YourCountry  kernel 2.6.22-14-generic
With this Subject Line cogent experts will be alerted, and useful case names left in the Archive. YourCountry will enable Country specific guidance. Your contry's local Linux experts
 can be found through: http://www.linux.org/groups/index.html.
They will know your Country's modem code, which may be essential for dialup service. Responses from Discuss@xxxxxxxxxxxxx are sometimes blocked by an Internet Provider mail filters. So in a day, also check the Archived responses at http://www.linmodems.org
--------------------------  System information ----------------------------
CPU=i686,
Linux version 2.6.22-14-generic (buildd@palmer) (gcc version 4.1.3 20070929 (prerelease) (Ubuntu 4.1.2-16ubuntu2)) #1 SMP Sun Oct 14 23:05:12 GMT 2007
 scanModem update of:  2008_03_16
The modem symbolic link is /dev/modem -> ttySL0
The slmodemd set symbolic link is /dev/ttySL0 -> /dev/pts/0

 There are no blacklisted modem drivers in /etc/modprobe*  files

The Advanced Linux Sound Architecture (ALSA) packages providing audio support, also includes drivers for some modems. The ALSA diagnostics are written during
bootup to /proc/asound/ folders.


The ALSA verion is 1.0.14
The modem cards detected by "aplay -l"  are:


The /proc/asound/pcm file reports:
-----------------------
00-02: Intel ICH - IEC958 : ALi M5455 - IEC958 : playback 1
00-01: Intel ICH - MIC ADC : ALi M5455 - MIC ADC : capture 1
00-00: Intel ICH : ALi M5455 : playback 1 : capture 1

about /proc/asound/cards:
------------------------
 0 [M5455          ]: ICH - ALi M5455
                      ALi M5455 with ALC655 at irq 19

USB modem not detected by lsusb

For candidate card in slot 00:1d.1, firmware information and bootup diagnostics are:
 PCI slot	PCI ID		SubsystemID	Name
 ----------	---------	---------	--------------
00:1d.1 10b9:5457 1631:c00e Modem: ALi Corporation M5457 AC'97 Modem Controller

 Modem interrupt assignment and sharing:
 17:          0   IO-APIC-fasteoi   SL1800
 --- Bootup diagnostics for card in PCI slot 00:1d.1 ----
[ 18.812077] ACPI: PCI Interrupt 0000:00:1d.1[B] -> GSI 22 (level, low) -> IRQ 17
[   18.813242] 0000:00:1d.1: ttyS0 at I/O 0xe220 (irq = 17) is a 8250
[   18.813523] 0000:00:1d.1: ttyS1 at I/O 0xe228 (irq = 17) is a 8250
[   18.814303] 0000:00:1d.1: ttyS2 at I/O 0xe240 (irq = 17) is a 8250
[   18.814633] 0000:00:1d.1: ttyS3 at I/O 0xe248 (irq = 17) is a 8250
[   18.814782] Couldn't register serial port 0000:00:1d.1: -28
[   31.724000] ACPI: PCI interrupt for device 0000:00:1d.1 disabled
[ 31.772000] ACPI: PCI Interrupt 0000:00:1d.1[B] -> GSI 22 (level, low) -> IRQ 17
[   31.772000] PCI: Setting latency timer of device 0000:00:1d.1 to 64

 The PCI slot 00:1d.1 of the modem card may be disabled early in
 a bootup process,  but then enabled later. If modem drivers load
 but the  modem is not responsive, read Bootup.txt about possible fixes.
 Send dmesg.txt along with ModemData.txt to discuss@xxxxxxxxxxxxx
 if help is needed.



 === Finished modem firmware and bootup diagnostics section. ===
 === Next deducing cogent software ===


Predictive diagnostics for card in bus 00:1d.1:
	Modem chipset  detected on
CLASS="Class 0703: 10b9:5457"
NAME="Modem: ALi Corporation M5457 AC'97 Modem Controller "
PCIDEV=10b9:5457
SUBSYS=1631:c00e
IRQ=17
SOFT=10b9:5457.MC97
CodecArchived=SIL22
IDENT=slmodemd
Driver=slamr

 For candidate modem in:  00:1d.1
Class 0703: 10b9:5457 Modem: ALi Corporation M5457 AC'97 Modem Controller
      Primary PCI_id  10b9:5457
    Subsystem PCI_id  1631:c00e
    Softmodem codec or chipset from diagnostics:
from Archives: SIL22supported by ungrab-winmodem + slamr drivers



 Lacking a dsp (digital signal processing) chip, the modem is a software
 intensive or "softmodem" type. Its primary controller manages the traffic
 with the CPU. But the software needed is specified in the Subsystem.
 -----------------------------------------
Support type needed or chipset:	slamr

----------------end Softmodem section --------------
The modem is supported by the Smartlink slamr driver
plus the slmodemd helper utility.  Read the
Smartlink.txt and Modem/YourSystem.txt for follow through guidance.


Download slamr-2.6.22-14-generic.tar.gz from http://linmodems.technion.il/packages/smartlink/Ubuntu/
 under Linux, open a terminal and unpack with:
 $ tar zxvf slamr*.tar.gz
 Move into the unpacked folder
 $ cd slamr-2.6.22-14-generic
 Look around
 $ ls
 Run the
 $  sudo ./setup

 Afterwards do:
 $ slmodemd --help
 $ slmodemd --countrylist &> Clist.txt
 If not in the USA, look for your COUNTRY_NAME therein.
 Do and edit with:
 $ sudo gedit  /etc/default/sl-modem-daemon
 and therein replace the USA in the line:
 SLMODEMD_COUNTRY=USA
 This will provide for the correct Country setting in the automated:
    slmodemd -c COUNTRY /dev/slamr0

 Read the Smartlink.txt and YourSystem.txt
Writing Smartlink.txt
============ end Smartlink section =====================

 Completed candidate modem analyses.

 The base of the UDEV device file system is: /dev/.udev

 Versions adequately match for the compiler installed: 4.1.3
             and the compiler used in kernel assembly: 4.1.3



 Minimal compiling resources appear complete:
   make utility - /usr/bin/make
   Compiler version 4.1
   linuc_headers base folder /lib/modules/2.6.22-14-generic/build

However some compilations and executable functions may need additional files, in the FileNames.h (so called kernel "h"eaders) collection installed in /usr/include/ . For martian_modem, additional required packages are libc6-dev (and for Debian/Ubuntu, linux-libc-dev). The also required headers of package libc6 are commonly installed by default.

Compressed files at: /usr/src/sl-modem.tar.bz2


If a driver compilation fails, with message including some lack of some FileName.h (stdio.h for example), then Some additional kernel-header files need installation to /usr/include. The minimal additional packages are libc6-dev
and any of its dependents, under Ubuntu linux-libc-dev

If an alternate ethernet connection is available,
$  apt-get update
$  apt-get -s install linux-kernel-devel
will install needed package
For Debian/Ubuntu related distributions, run the following command to display the needed package list:

Otherwise packages have to be found through http://packages.ubuntu.com
Once downloaded and transferred into a Linux partition,
they can be installed alltogether with:
$ sudo dpkg -i *.deb


Checking pppd properties:
	-rwsr-xr-- 1 root dip 269256 2007-10-04 21:57 /usr/sbin/pppd

In case of an "error 17" "serial loopback" problem, see:
    http://linmodems.technion.ac.il/linmodems/archive-sixth/msg02637.html

To enable dialout without Root permission do:
	$ su - root  (not for Ubuntu)
        sudo chmod a+x /usr/sbin/pppd
or under Ubuntu related Linuxes
	sudo chmod a+x /usr/sbin/pppd

Checking settings of:	/etc/ppp/options
asyncmap 0
noauth
crtscts
lock
hide-password
modem
proxyarp
lcp-echo-interval 30
lcp-echo-failure 4
noipx

In case of a message like:
   Warning: Could not modify /etc/ppp/pap-secrets: Permission denied
see http://linmodems.technion.ac.il/bigarch/archive-sixth/msg04656.html


 Don't worry about the following, it is for the experts
 should trouble shooting be necessary.
==========================================================

# start/stop the daemon when the USB modem is connected
KERNEL=="slusb[0-9]*", GROUP="dialout", RUN+="/etc/init.d/sl-modem-daemon"
 Checking for modem support lines:
 --------------------------------------
/device/modem symbolic link: lrwxrwxrwx 1 root root 6 2008-03-21 08:37 /dev/modem -> ttySL0 slmodemd created symbolic link /dev/ttySL0: lrwxrwxrwx 1 root root 10 2008-03-21 08:37 /dev/ttySL0 -> /dev/pts/0
     Within /etc/udev/ files:
/etc/udev/rules.d/030_sl-modem-daemon.rules:# start/stop the daemon when the USB modem is connected /etc/udev/rules.d/030_sl-modem-daemon.rules:KERNEL=="slusb[0-9]*", GROUP="dialout", RUN+="/etc/init.d/sl-modem-daemon" /etc/udev/sl-modem-daemon.rules:# start/stop the daemon when the USB modem is connected /etc/udev/sl-modem-daemon.rules:KERNEL=="slusb[0-9]*", GROUP="dialout", RUN+="/etc/init.d/sl-modem-daemon"
     Within /etc/modprobe.conf files:
/etc/modprobe.d/sl-modem-daemon.modutils:install slamr modprobe --ignore-install ungrab-winmodem ; modprobe --ignore-install slamr; test -e /dev/slamr0 || (/bin/mknod -m 660 /dev/slamr0 c 242 0 2>/dev/null && chgrp dialout /dev/slamr0)
/etc/modprobe.d/alsa-base:options snd-atiixp-modem index=-2
/etc/modprobe.d/alsa-base:options snd-via82xx-modem index=-2
/etc/modprobe.d/blacklist-modem:# Uncomment these entries in order to blacklist unwanted modem drivers
/etc/modprobe.d/blacklist-modem:# blacklist snd-atiixp-modem
/etc/modprobe.d/blacklist-modem:# blacklist snd-via82xx-modem
     Within any ancient /etc/devfs files:

     Within ancient kernel 2.4.n /etc/module.conf files:

--------- end modem support lines --------




[Index of Archives]     [Linux Media Development]     [Asterisk]     [DCCP]     [Netdev]     [X.org]     [Xfree86]     [Fedora Women]     [Linux USB]

  Powered by Linux