Only plain text email is forwarded by the Discuss@xxxxxxxxxxxxx List Server,
as HTML can contain viruses. Use as the email Subject Line:
YourName, YourCountry kernel 2.6.22-14-generic
With this Subject Line cogent experts will be alerted, and useful case names left in the Archive.
YourCountry will enable Country specific guidance. Your contry's local Linux experts
can be found through: http://www.linux.org/groups/index.html.
They will know your Country's modem code, which may be essential for dialup service.
Responses from Discuss@xxxxxxxxxxxxx are sometimes blocked by an Internet Provider mail filters.
So in a day, also check the Archived responses at http://www.linmodems.org
-------------------------- System information ----------------------------
CPU=i686,
Linux version 2.6.22-14-generic (buildd@terranova) (gcc version 4.1.3 20070929 (prerelease) (Ubuntu 4.1.2-16ubuntu2)) #1 SMP Tue Feb 12 07:42:25 UTC 2008
scanModem update of: 2008_03_09
The modem symbolic link is /dev/modem -> ttySL0
The slmodemd set symbolic link is /dev/ttySL0 -> /dev/pts/0
There are no blacklisted modem drivers in /etc/modprobe* files
The Advanced Linux Sound Architecture (ALSA) packages providing audio support,
also includes drivers for some modems. The ALSA diagnostics are written during
bootup to /proc/asound/ folders.
The ALSA verion is 1.0.14
The modem cards detected by "aplay -l" are:
card 1: Modem [Intel 82801DB-ICH4 Modem], device 0: Intel ICH - Modem [Intel 82801DB-ICH4 Modem - Modem]
The /proc/asound/pcm file reports:
-----------------------
00-04: Intel ICH - IEC958 : Intel 82801DB-ICH4 - IEC958 : playback 1
00-03: Intel ICH - ADC2 : Intel 82801DB-ICH4 - ADC2 : capture 1
00-02: Intel ICH - MIC2 ADC : Intel 82801DB-ICH4 - MIC2 ADC : capture 1
00-01: Intel ICH - MIC ADC : Intel 82801DB-ICH4 - MIC ADC : capture 1
00-00: Intel ICH : Intel 82801DB-ICH4 : playback 1 : capture 1
01-00: Intel ICH - Modem : Intel 82801DB-ICH4 Modem - Modem : playback 1 : capture 1
about /proc/asound/cards:
------------------------
0 [I82801DBICH4 ]: ICH4 - Intel 82801DB-ICH4
Intel 82801DB-ICH4 with STAC9721,23 at irq 5
1 [Modem ]: ICH-MODEM - Intel 82801DB-ICH4 Modem
Intel 82801DB-ICH4 Modem at irq 5
The driver snd-intel8x0m with its dependent drivers:
snd_intel8x0m 18572 5
snd_ac97_codec 100644 4 snd_atiixp_modem,snd_via82xx_modem,snd_intel8x0m,snd_intel8x0
snd_pcm 80388 8 snd_atiixp_modem,snd_via82xx_modem,snd_intel8x0m,snd_intel8x0,snd_ac97_codec,snd_pcm_oss
snd 54660 25 snd_atiixp_modem,snd_via82xx_modem,snd_intel8x0m,snd_intel8x0,snd_ac97_codec,snd_pcm_oss,snd_mixer_oss,snd_pcm,snd_seq_oss,snd_rawmidi,snd_seq,snd_timer,snd_seq_device
snd_page_alloc 11400 5 snd_atiixp_modem,snd_via82xx_modem,snd_intel8x0m,snd_intel8x0,snd_pcm
----------
provide modem + audio support.
Lines in: /proc/asound/card1/codec97#0/mc97#1-1+regs
-------------------------------
0:7c = 5349 and 0:7e = 4c27
are translated from hexadecimal code into the modem chip identifier: SIL27
USB modem not detected by lsusb
For candidate card in slot 00:1f.6, firmware information and bootup diagnostics are:
PCI slot PCI ID SubsystemID Name
---------- --------- --------- --------------
00:1f.6 8086:24c6 1043:1716 Modem: Intel Corporation 82801DB/DBL/DBM
Modem interrupt assignment and sharing:
5: 1950255 XT-PIC-XT uhci_hcd:usb1, uhci_hcd:usb2, uhci_hcd:usb3, ohci1394, eth0, yenta, yenta, eth1, Intel 82801DB-ICH4, Intel 82801DB-ICH4 Modem, i915@pci:0000:00:02.0
--- Bootup diagnostics for card in PCI slot 00:1f.6 ----
[ 14.610266] ACPI: PCI Interrupt 0000:00:1f.6[B] -> Link [LNKB] -> GSI 5 (level, low) -> IRQ 5
[ 14.610283] ACPI: PCI interrupt for device 0000:00:1f.6 disabled
[ 41.056000] ACPI: PCI Interrupt 0000:00:1f.6[B] -> Link [LNKB] -> GSI 5 (level, low) -> IRQ 5
[ 41.056000] PCI: Setting latency timer of device 0000:00:1f.6 to 64
The PCI slot 00:1f.6 of the modem card may be disabled early in
a bootup process, but then enabled later. If modem drivers load
but the modem is not responsive, read Bootup.txt about possible fixes.
Send dmesg.txt along with ModemData.txt to discuss@xxxxxxxxxxxxx
if help is needed.
=== Finished modem firmware and bootup diagnostics section. ===
=== Next deducing cogent software ===
Predictive diagnostics for card in bus 00:1f.6:
Modem chipset detected on
CLASS="Class 0703: 8086:24c6"
NAME="Modem: Intel Corporation 82801DB/DBL/DBM "
PCIDEV=8086:24c6
SUBSYS=1043:1716
IRQ=5
SOFT=8086:24c6.MC97
CODECd=SIL27
IDENT=slmodemd
SLMODEMD_DEVICE=modem:1
COD=SIL
Driver=snd-intel8x0m
For candidate modem in: 00:1f.6
Class 0703: 8086:24c6 Modem: Intel Corporation 82801DB/DBL/DBM
Primary PCI_id 8086:24c6
Subsystem PCI_id 1043:1716
Softmodem codec or chipset from diagnostics: SIL27, an LSI/AgereSystems type
from Archives:
This is a NEW softmodem case! Please send the output ModemData.txt
to DISCUSS@xxxxxxxxxxxxx to enrich the Archive and help others!
If further assistance is not needed, please use email Subject:
New Case Only
-------------------------------------------
Lacking a dsp (digital signal processing) chip, the modem is a software
intensive or "softmodem" type. Its primary controller manages the traffic
with the CPU. But the software needed is specified in the Subsystem.
-----------------------------------------
Support type needed or chipset: slmodemd
An ALSA (Advanced Linux Sound Architecture) modem driver: snd-intel8x0m
provides Low Level support enabling contact with the modem hardware.
For all BUT Conexant chip soft modems (using hsfmodem software)
complementary High Level support is through a Smartlink utility: slmodemd
Download from http://linmodems.technion.ac.il/packages/smartlink/
the package SLMODEMD.gcc4.1.tar.gz having a compiled slmodemd. Unpack under Linux with:
$ tar zxf SLMODEMD.gcc4.1.tar.gz
and read instructions therein. But briefly, the modem is setup with command:
sudo slmodemd -c YOUR_COUNTRY --alsa modem:1
reporting dynamic creation of ports:
/dev/ttySL0 --> /dev/pts/N , with N some number
Read Smartlink.txt and Modem/YourSystem.txt for follow through guidance.
----------------end Softmodem section --------------
Writing Intel.txt
Writing Smartlink.txt
============ end Smartlink section =====================
Completed candidate modem analyses.
The base of the UDEV device file system is: /dev/.udev
Versions adequately match for the compiler installed: 4.1.3
and the compiler used in kernel assembly: 4.1.3
Minimal compiling resources appear complete:
make utility - /usr/bin/make
Compiler version 4.1
linuc_headers base folder /lib/modules/2.6.22-14-generic/build
However some compilations and executable functions may need additional files,
in the FileNames.h (so called kernel "h"eaders) collection installed in /usr/include/ .
For martian_modem, additional required packages are libc6-dev (and for Debian/Ubuntu, linux-libc-dev). The also required headers of package libc6 are commonly installed by default.
If a driver compilation fails, with message including some lack of some FileName.h (stdio.h for example), then
Some additional kernel-header files need installation to /usr/include. The minimal additional packages are libc6-dev
and any of its dependents, under Ubuntu linux-libc-dev
If an alternate ethernet connection is available,
$ apt-get update
$ apt-get -s install linux-kernel-devel
will install needed package
For Debian/Ubuntu related distributions, run the following command to display the needed package list:
Otherwise packages have to be found through http://packages.ubuntu.com
Once downloaded and transferred into a Linux partition,
they can be installed alltogether with:
$ sudo dpkg -i *.deb
Checking pppd properties:
-rwsr-xr-- 1 root dip 269256 2007-10-04 21:57 /usr/sbin/pppd
In case of an "error 17" "serial loopback" problem, see:
http://linmodems.technion.ac.il/linmodems/archive-sixth/msg02637.html
To enable dialout without Root permission do:
$ su - root (not for Ubuntu)
sudo chmod a+x /usr/sbin/pppd
or under Ubuntu related Linuxes
sudo chmod a+x /usr/sbin/pppd
Checking settings of: /etc/ppp/options
asyncmap 0
noauth
crtscts
lock
hide-password
modem
proxyarp
lcp-echo-interval 30
lcp-echo-failure 4
noipx
In case of a message like:
Warning: Could not modify /etc/ppp/pap-secrets: Permission denied
see http://linmodems.technion.ac.il/bigarch/archive-sixth/msg04656.html
Read Modem/YourSystem.txt concerning other COMM channels: eth0 eth1 eth1:avah
Which can interfere with Browser naviagation.
Don't worry about the following, it is for the experts
should trouble shooting be necessary.
==========================================================
# start/stop the daemon when the USB modem is connected
KERNEL=="slusb[0-9]*", GROUP="dialout", RUN+="/etc/init.d/sl-modem-daemon"
Checking for modem support lines:
--------------------------------------
/device/modem symbolic link: lrwxrwxrwx 1 root root 6 2008-03-12 14:50 /dev/modem -> ttySL0
slmodemd created symbolic link /dev/ttySL0: lrwxrwxrwx 1 root root 10 2008-03-12 14:50 /dev/ttySL0 -> /dev/pts/0
Within /etc/udev/ files:
/etc/udev/rules.d/030_sl-modem-daemon.rules:# start/stop the daemon when the USB modem is connected
/etc/udev/rules.d/030_sl-modem-daemon.rules:KERNEL=="slusb[0-9]*", GROUP="dialout", RUN+="/etc/init.d/sl-modem-daemon"
/etc/udev/sl-modem-daemon.rules:# start/stop the daemon when the USB modem is connected
/etc/udev/sl-modem-daemon.rules:KERNEL=="slusb[0-9]*", GROUP="dialout", RUN+="/etc/init.d/sl-modem-daemon"
Within /etc/modprobe.conf files:
/etc/modprobe.d/alsa-base:options snd-atiixp-modem index=-2
/etc/modprobe.d/alsa-base:options snd-via82xx-modem index=-2
/etc/modprobe.d/blacklist-modem:# Uncomment these entries in order to blacklist unwanted modem drivers
/etc/modprobe.d/blacklist-modem:# blacklist snd-atiixp-modem
/etc/modprobe.d/blacklist-modem:# blacklist snd-via82xx-modem
/etc/modprobe.d/sl-modem-daemon.modutils:install slamr modprobe --ignore-install ungrab-winmodem ; modprobe --ignore-install slamr; test -e /dev/slamr0 || (/bin/mknod -m 660 /dev/slamr0 c 242 0 2>/dev/null && chgrp dialout /dev/slamr0)
Within any ancient /etc/devfs files:
Within ancient kernel 2.4.n /etc/module.conf files:
--------- end modem support lines --------
