RE: Feb 2 08:08:52 artur-desktop kernel: [ 106.914099] agrmodem: module license 'Proprietary' taints kernel. Feb 2 08:08:52 artur-desktop kernel: [ 106.916883] agrsm: created 1 infos Feb 2 08:09:01 artur-desktop kernel: [ 115.569001] ttyAGS3 at I/O 0xe800 (irq = 19) is a AgereModem Feb 2 08:09:01 artur-desktop kernel: [ 115.569898] agrserial: Loading module Agere Modem Interface driver version 2.1.60.0.Linspire (2005-11-16) -------- This is what is expected. But on my System with the sake kernel as yours: $ sudo modprobe agrmodem FATAL: Error inserting agrmodem (/lib/modules/2.6.22-14-generic/extra/agrmodem.ko): Unknown symbol in module, or unknown parameter (see dmesg) marv@marvdesk:~$ tail -f /var/log/messages [ 1610.064000] agrmodem: Unknown symbol agr_pci_get_irq So it does appear that symbol agr_pci_get_irq must somehow be read off the firmware. MarvS agrmodem: Unknown symbol agr_pci_get_irq On Feb 1, 2008 10:16 PM, Artur Karimov <arturjuma@xxxxx> wrote: > Marvin, > Here is what I got: > Feb 2 08:08:07 artur-desktop kernel: [ 61.569604] sd 6:0:0:0: [sdf] Write Protect is off > Feb 2 08:08:07 artur-desktop kernel: [ 61.574904] sd 6:0:0:0: [sdf] 1994385 512-byte hardware sectors (1021 MB) > Feb 2 08:08:07 artur-desktop kernel: [ 61.577572] sd 6:0:0:0: [sdf] Write Protect is off > Feb 2 08:08:07 artur-desktop kernel: [ 61.577583] sdf: sdf1 > Feb 2 08:08:07 artur-desktop kernel: [ 61.582132] sd 6:0:0:0: [sdf] Attached SCSI removable disk > Feb 2 08:08:07 artur-desktop kernel: [ 61.582184] sd 6:0:0:0: Attached scsi generic sg6 type 0 > Feb 2 08:08:52 artur-desktop kernel: [ 106.914099] agrmodem: module license 'Proprietary' taints kernel. > Feb 2 08:08:52 artur-desktop kernel: [ 106.916883] agrsm: created 1 infos > Feb 2 08:09:01 artur-desktop kernel: [ 115.569001] ttyAGS3 at I/O 0xe800 (irq = 19) is a AgereModem > Feb 2 08:09:01 artur-desktop kernel: [ 115.569898] agrserial: Loading module Agere Modem Interface driver version 2.1.60.0.Linspire (2005-11-16) > > > Artur, > PLEASE Subscribe the List at www.linmodems.org > or your messages have to wait for manual approval! > > Just after loading the drivers, Please do > tail -f /var/log/messages > > Copy out the lines concering agrmodem and agrserial > and send them to us. > > MarvS > >
