Mehedi At http://phep2.technion.ac.il/linmodems/packages/ltmodem/sv92/ the agrsm-20070804.tar.gz Read Agrsm.txt MarvS On Jan 4, 2008 2:00 AM, Mehedi Hasan <shaon007@xxxxxxxxx> wrote: > -------------------------- System information ---------------------------- > CPU=i686, Fedora release 8 (Werewolf) > Kernel > Linux version 2.6.23.1-42.fc8 > (kojibuilder@xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx) (gcc version 4.1.2 > 20070925 (Red Hat 4.1.2-33)) #1 SMP Tue Oct 30 13:55:12 EDT 2007 > scanModem update of: 2007-20-07 > > > There are no blacklisted modem drivers in /etc/modprobe* files > > The Advanced Linux Sound Architecture (ALSA) packages providing audio > support on your System, > also includes drivers for some modems. High Definition Audio (HDA) > cards can themselves host > a softmodem chipset, with both audio+modem supported by a snd-hda-intel driver. > The ALSA diagnostics are written during bootup to /proc/asound/ folders. > > > The modem codec file for the the HDA card is: /proc/asound/card0/codec#2 > -------------------------------------------------------- > Codec: Realtek ALC888 > Address: 2 > Vendor Id: 0x10ec0888 > Subsystem Id: 0x8086d606 > Revision Id: 0x100001 > No Modem Function Group found > Default PCM: > rates [0x560]: 44100 48000 96000 192000 > bits [0xe]: 16 20 24 > formats [0x1]: PCM > Default Amp-In caps: N/A > Default Amp-Out caps: N/A > Node 0x02 [Audio Output] wcaps 0x11: Stereo > PCM: > rates [0x560]: 44100 48000 96000 192000 > bits [0xe]: 16 20 24 > formats [0x1]: PCM > Node 0x03 [Audio Output] wcaps 0x11: Stereo > PCM: > rates [0x560]: 44100 48000 96000 192000 > bits [0xe]: 16 20 24 > formats [0x1]: PCM > Node 0x04 [Audio Output] wcaps 0x11: Stereo > PCM: > rates [0x560]: 44100 48000 96000 192000 > bits [0xe]: 16 20 24 > formats [0x1]: PCM > Node 0x05 [Audio Output] wcaps 0x11: Stereo > PCM: > rates [0x560]: 44100 48000 96000 192000 > bits [0xe]: 16 20 24 > formats [0x1]: PCM > Node 0x06 [Audio Output] wcaps 0x211: Stereo Digital > PCM: > rates [0x5e0]: 44100 48000 88200 96000 192000 > bits [0x1e]: 16 20 24 32 > formats [0x1]: PCM > Node 0x07 [Vendor Defined Widget] wcaps 0xf00000: Mono > Node 0x08 [Audio Input] wcaps 0x10011b: Stereo Amp-In > Amp-In caps: ofs=0x0b, nsteps=0x1f, stepsize=0x05, mute=1 > Amp-In vals: [0x00 0x00] > PCM: > rates [0x160]: 44100 48000 96000 > bits [0x6]: 16 20 > formats [0x1]: PCM > Connection: 1 > 0x23 > Node 0x09 [Audio Input] wcaps 0x10011b: Stereo Amp-In > Amp-In caps: ofs=0x0b, nsteps=0x1f, stepsize=0x05, mute=1 > Amp-In vals: [0x00 0x00] > PCM: > rates [0x160]: 44100 48000 96000 > bits [0x6]: 16 20 > formats [0x1]: PCM > Connection: 1 > 0x22 > Node 0x0a [Audio Input] wcaps 0x100391: Stereo Digital > PCM: > rates [0x560]: 44100 48000 96000 192000 > bits [0x1e]: 16 20 24 32 > formats [0x1]: PCM > Connection: 1 > 0x1f > Node 0x0b [Audio Mixer] wcaps 0x20010b: Stereo Amp-In > Amp-In caps: ofs=0x17, nsteps=0x1f, stepsize=0x05, mute=1 > Amp-In vals: [0x80 0x80] [0x80 0x80] [0x80 0x80] [0x80 0x80] [0x80 > 0x80] [0x80 0x80] [0x80 0x80] [0x80 0x80] [0x80 0x80] [0x80 0x80] > Connection: 10 > 0x18 0x19 0x1a 0x1b 0x1c 0x1d 0x14 0x15 0x16 0x17 > Node 0x0c [Audio Mixer] wcaps 0x20010f: Stereo Amp-In Amp-Out > Amp-In caps: ofs=0x00, nsteps=0x00, stepsize=0x00, mute=1 > Amp-In vals: [0x00 0x00] [0x00 0x00] > Amp-Out caps: ofs=0x1f, nsteps=0x1f, stepsize=0x05, mute=0 > Amp-Out vals: [0x17 0x17] > Connection: 2 > 0x02 0x0b > Node 0x0d [Audio Mixer] wcaps 0x20010f: Stereo Amp-In Amp-Out > Amp-In caps: ofs=0x00, nsteps=0x00, stepsize=0x00, mute=1 > Amp-In vals: [0x00 0x00] [0x00 0x00] > Amp-Out caps: ofs=0x1f, nsteps=0x1f, stepsize=0x05, mute=0 > Amp-Out vals: [0x00 0x00] > Connection: 2 > 0x03 0x0b > Node 0x0e [Audio Mixer] wcaps 0x20010f: Stereo Amp-In Amp-Out > Amp-In caps: ofs=0x00, nsteps=0x00, stepsize=0x00, mute=1 > Amp-In vals: [0x00 0x00] [0x00 0x00] > Amp-Out caps: ofs=0x1f, nsteps=0x1f, stepsize=0x05, mute=0 > Amp-Out vals: [0x00 0x00] > Connection: 2 > 0x04 0x0b > Node 0x0f [Audio Mixer] wcaps 0x20010f: Stereo Amp-In Amp-Out > Amp-In caps: ofs=0x00, nsteps=0x00, stepsize=0x00, mute=1 > Amp-In vals: [0x00 0x00] [0x00 0x00] > Amp-Out caps: ofs=0x1f, nsteps=0x1f, stepsize=0x05, mute=0 > Amp-Out vals: [0x00 0x00] > Connection: 2 > 0x05 0x0b > Node 0x10 [Vendor Defined Widget] wcaps 0xf00000: Mono > Node 0x11 [Vendor Defined Widget] wcaps 0xf00000: Mono > Node 0x12 [Vendor Defined Widget] wcaps 0xf00000: Mono > Node 0x13 [Vendor Defined Widget] wcaps 0xf00000: Mono > Node 0x14 [Pin Complex] wcaps 0x40018f: Stereo Amp-In Amp-Out > Amp-In caps: ofs=0x00, nsteps=0x03, stepsize=0x27, mute=0 > Amp-In vals: [0x00 0x00] [0x00 0x00] [0x00 0x00] [0x00 0x00] [0x00 0x00] > Amp-Out caps: ofs=0x00, nsteps=0x00, stepsize=0x00, mute=1 > Amp-Out vals: [0x00 0x00] > Pincap 0x083e: IN OUT HP Detect > Pin Default 0x01014410: [Jack] Line Out at Ext Rear > Conn = 1/8, Color = Green > Pin-ctls: 0x40: OUT > Connection: 5 > 0x0c* 0x0d 0x0e 0x0f 0x26 > Node 0x15 [Pin Complex] wcaps 0x40018f: Stereo Amp-In Amp-Out > Amp-In caps: ofs=0x00, nsteps=0x03, stepsize=0x27, mute=0 > Amp-In vals: [0x00 0x00] [0x00 0x00] [0x00 0x00] [0x00 0x00] [0x00 0x00] > Amp-Out caps: ofs=0x00, nsteps=0x00, stepsize=0x00, mute=1 > Amp-Out vals: [0x80 0x80] > Pincap 0x083e: IN OUT HP Detect > Pin Default 0x411111f0: [N/A] Speaker at Ext Rear > Conn = 1/8, Color = Black > Pin-ctls: 0x20: IN > Connection: 5 > 0x0c 0x0d* 0x0e 0x0f 0x26 > Node 0x16 [Pin Complex] wcaps 0x40018f: Stereo Amp-In Amp-Out > Amp-In caps: ofs=0x00, nsteps=0x03, stepsize=0x27, mute=0 > Amp-In vals: [0x00 0x00] [0x00 0x00] [0x00 0x00] [0x00 0x00] [0x00 0x00] > Amp-Out caps: ofs=0x00, nsteps=0x00, stepsize=0x00, mute=1 > Amp-Out vals: [0x80 0x80] > Pincap 0x0836: IN OUT Detect > Pin Default 0x411111f0: [N/A] Speaker at Ext Rear > Conn = 1/8, Color = Black > Pin-ctls: 0x20: IN > Connection: 5 > 0x0c 0x0d 0x0e* 0x0f 0x26 > Node 0x17 [Pin Complex] wcaps 0x40018f: Stereo Amp-In Amp-Out > Amp-In caps: ofs=0x00, nsteps=0x03, stepsize=0x27, mute=0 > Amp-In vals: [0x00 0x00] [0x00 0x00] [0x00 0x00] [0x00 0x00] [0x00 0x00] > Amp-Out caps: ofs=0x00, nsteps=0x00, stepsize=0x00, mute=1 > Amp-Out vals: [0x80 0x80] > Pincap 0x0836: IN OUT Detect > Pin Default 0x411111f0: [N/A] Speaker at Ext Rear > Conn = 1/8, Color = Black > Pin-ctls: 0x20: IN > Connection: 5 > 0x0c 0x0d 0x0e 0x0f* 0x26 > Node 0x18 [Pin Complex] wcaps 0x40018f: Stereo Amp-In Amp-Out > Amp-In caps: ofs=0x00, nsteps=0x03, stepsize=0x27, mute=0 > Amp-In vals: [0x00 0x00] [0x00 0x00] [0x00 0x00] [0x00 0x00] [0x00 0x00] > Amp-Out caps: ofs=0x00, nsteps=0x00, stepsize=0x00, mute=1 > Amp-Out vals: [0x80 0x80] > Pincap 0x08373e: IN OUT HP Detect > Pin Default 0x01a19c30: [Jack] Mic at Ext Rear > Conn = 1/8, Color = Pink > Pin-ctls: 0x24: IN > Connection: 5 > 0x0c* 0x0d 0x0e 0x0f 0x26 > Node 0x19 [Pin Complex] wcaps 0x40018f: Stereo Amp-In Amp-Out > Amp-In caps: ofs=0x00, nsteps=0x03, stepsize=0x27, mute=0 > Amp-In vals: [0x00 0x00] [0x00 0x00] [0x00 0x00] [0x00 0x00] [0x00 0x00] > Amp-Out caps: ofs=0x00, nsteps=0x00, stepsize=0x00, mute=1 > Amp-Out vals: [0x80 0x80] > Pincap 0x08373e: IN OUT HP Detect > Pin Default 0x02a19940: [Jack] Mic at Ext Front > Conn = 1/8, Color = Pink > Pin-ctls: 0x24: IN > Connection: 5 > 0x0c* 0x0d 0x0e 0x0f 0x26 > Node 0x1a [Pin Complex] wcaps 0x40018f: Stereo Amp-In Amp-Out > Amp-In caps: ofs=0x00, nsteps=0x03, stepsize=0x27, mute=0 > Amp-In vals: [0x00 0x00] [0x00 0x00] [0x00 0x00] [0x00 0x00] [0x00 0x00] > Amp-Out caps: ofs=0x00, nsteps=0x00, stepsize=0x00, mute=1 > Amp-Out vals: [0x80 0x80] > Pincap 0x08373e: IN OUT HP Detect > Pin Default 0x0181343f: [Jack] Line In at Ext Rear > Conn = 1/8, Color = Blue > Pin-ctls: 0x20: IN > Connection: 5 > 0x0c* 0x0d 0x0e 0x0f 0x26 > Node 0x1b [Pin Complex] wcaps 0x40018f: Stereo Amp-In Amp-Out > Amp-In caps: ofs=0x00, nsteps=0x03, stepsize=0x27, mute=0 > Amp-In vals: [0x00 0x00] [0x00 0x00] [0x00 0x00] [0x00 0x00] [0x00 0x00] > Amp-Out caps: ofs=0x00, nsteps=0x00, stepsize=0x00, mute=1 > Amp-Out vals: [0x00 0x00] > Pincap 0x08373e: IN OUT HP Detect > Pin Default 0x02214120: [Jack] HP Out at Ext Front > Conn = 1/8, Color = Green > Pin-ctls: 0xc0: OUT HP > Connection: 5 > 0x0c* 0x0d 0x0e 0x0f 0x26 > Node 0x1c [Pin Complex] wcaps 0x400001: Stereo > Pincap 0x0820: IN > Pin Default 0x411111f0: [N/A] Speaker at Ext Rear > Conn = 1/8, Color = Black > Pin-ctls: 0x20: IN > Node 0x1d [Pin Complex] wcaps 0x400000: Mono > Pincap 0x0820: IN > Pin Default 0x411111f0: [N/A] Speaker at Ext Rear > Conn = 1/8, Color = Black > Pin-ctls: 0x20: IN > Node 0x1e [Pin Complex] wcaps 0x400300: Mono Digital > Pincap 0x0810: OUT > Pin Default 0x411111f0: [N/A] Speaker at Ext Rear > Conn = 1/8, Color = Black > Pin-ctls: 0x40: OUT > Connection: 1 > 0x06 > Node 0x1f [Pin Complex] wcaps 0x400200: Mono Digital > Pincap 0x0820: IN > Pin Default 0x411111f0: [N/A] Speaker at Ext Rear > Conn = 1/8, Color = Black > Pin-ctls: 0x20: IN > Node 0x20 [Vendor Defined Widget] wcaps 0xf00040: Mono > Node 0x21 [Vendor Defined Widget] wcaps 0xf00000: Mono > Node 0x22 [Audio Mixer] wcaps 0x20010b: Stereo Amp-In > Amp-In caps: ofs=0x00, nsteps=0x00, stepsize=0x00, mute=1 > Amp-In vals: [0x00 0x00] [0x00 0x00] [0x00 0x00] [0x80 0x80] [0x80 > 0x80] [0x80 0x80] [0x80 0x80] [0x80 0x80] [0x80 0x80] [0x80 0x80] > [0x80 0x80] > Connection: 11 > 0x18 0x19 0x1a 0x1b 0x1c 0x1d 0x14 0x15 0x16 0x17 0x0b > Node 0x23 [Audio Mixer] wcaps 0x20010b: Stereo Amp-In > Amp-In caps: ofs=0x00, nsteps=0x00, stepsize=0x00, mute=1 > Amp-In vals: [0x00 0x00] [0x00 0x00] [0x00 0x00] [0x80 0x80] [0x00 > 0x00] [0x80 0x80] [0x80 0x80] [0x80 0x80] [0x80 0x80] [0x80 0x80] > [0x80 0x80] > Connection: 11 > 0x18 0x19 0x1a 0x1b 0x1c 0x1d 0x14 0x15 0x16 0x17 0x0b > Node 0x24 [Vendor Defined Widget] wcaps 0xf00000: Mono > Node 0x25 [Audio Output] wcaps 0x11: Stereo > PCM: > rates [0x560]: 44100 48000 96000 192000 > bits [0xe]: 16 20 24 > formats [0x1]: PCM > Node 0x26 [Audio Mixer] wcaps 0x20010f: Stereo Amp-In Amp-Out > Amp-In caps: ofs=0x00, nsteps=0x00, stepsize=0x00, mute=1 > Amp-In vals: [0x00 0x00] [0x00 0x00] > Amp-Out caps: ofs=0x1f, nsteps=0x1f, stepsize=0x05, mute=0 > Amp-Out vals: [0x00 0x00] > Connection: 2 > 0x25 0x0b > > Summary card and chipset information is in: > /proc/asound/cards: > 0 [Intel ]: HDA-Intel - HDA Intel > HDA Intel at 0x52100000 irq 21 > > /proc/asound/pcm: > 00-02: ALC883 Analog : ALC883 Analog : capture 2 > 00-00: ALC883 Analog : ALC883 Analog : playback 1 : capture 2 > > A copy of /proc/asound had been copied to Modem/ALSAroot.tgz > PCI slot 00:1b.0 has a High Definition Audio Card > USB modem not detected by lsusb > > For candidate card, firmware information and bootup diagnostics are: > > PCI slot PCI ID SubsystemID Name > ---------- --------- --------- -------------- > 06:04.0 11c1:0620 11c1:0620 Communication controller: Agere Systems > Unknown device 0620 > > Modem interrupt assignment and sharing: > --- Bootup diagnostics for card in PCI slot 06:04.0 ---- > For candidate card, firmware information and bootup diagnostics are: > > PCI slot PCI ID SubsystemID Name > ---------- --------- --------- -------------- > 00:1b.0 8086:27d8 8086:d606 Audio device: Intel Corporation 82801G > > Modem interrupt assignment and sharing: > 21: 143 3934 IO-APIC-fasteoi HDA Intel > --- Bootup diagnostics for card in PCI slot 00:1b.0 ---- > ACPI: PCI Interrupt 0000:00:1b.0[A] -> GSI 22 (level, low) -> IRQ 21 > PCI: Setting latency timer of device 0000:00:1b.0 to 64 > > === Finished modem firmware and bootup diagnostics section. === > === Next deducing cogent software === > > The High Defintion Audio card with PCI ID 8086:27d8 may host a soft > modem chip. > The NotDetermined is not supported by this kernel. > > There is candidate modem software. > > For candidate modem in PCI bus: 00:1b.0 > Class 0403: 8086:27d8 Audio device: Intel Corporation 82801G > Primary PCI_id 8086:27d8 > Subsystem PCI_id 8086:d606 > Softmodem codec or chipset from diagnostics: > from Archives: > > > Lacking a dsp (digital signal processing) chip, the modem is a software > intensive or "softmodem" type. Its primary controller manages the traffic > with the CPU. But the software needed is specified in the Subsystem. > ----------------------------------------- > Support type needed or chipset: > > Support can likely be achieved through two mutually exclusive alternatives: > 1) The hsfmodem software for Conexant chipset modems: Read Conexant.txt > The following ALSA alternative CANNOT work with Conexant modems. > > 2) An ALSA modem driver plus slmodemd. Read Smartlink.txt for details, and > to test get the package SLMODEMD.gcc4.1.tar.gz from: > http://linmodems.technion.ac.il/packages/smartlink/ > > > Writing Intel.txt > > For owners of a Dell PCs with Conexant HSF modems, a driver source > package with full speed enabled is available, but requires driver > compiling. Read Conexant.txt > > Read Conexant.txt > > Writing Conexant.txt > > Writing Smartlink.txt > ============ end Smartlink section ===================== > > For candidate modem in PCI bus: 06:04.0 > Class 0780: 11c1:0620 Communication controller: Agere Systems > Unknown device 0620 > Primary PCI_id 11c1:0620 > Support type needed or chipset: Agere.SV2P > > > > Vendor 11c1 is Lucent Technologies with modem technology now under LSI Inc. > Their Linux code developer/maintainer is Soumyendu Sarkar. Support > for a chipset and its > continued maintenance is only initiated at the request of a major > chipset buyer, > or comparable sponsor. Several different modem chipset types are produced: > with varying support under Linux. > Device ID Support Name Comment > --------- ------------- ----------- ----------------------------- > 0480 serial drivers Venus controller chipset 1673JV7 > 0440-045d martian Mars/Apollo DSP (digital signal > processing) chipsets > 0462 none 56K.V90/ADSL Wildwire > 048d none SV2P soft modem > 048(c or f) AGRSM SV2P soft modem > 0600 none soft modem, very few in the field. > 0620 AGRSM Pinball soft modem, in some HP desktop PCs > 062(1-3) none SV92PP,Pinball soft modem, in some HP desktop PCs > > martian - At http://phep2.technion.ac.il/linmodems/packages/ltmodem/kernel-2.6/martian/ > > AGRSM - At http://phep2.technion.ac.il/linmodems/packages/ltmodem/sv92/ > Read Agrsm.txt > Read Agrsm.txt > -------------- end Agere Systems section ------------------- > > Completed candidate modem analyses. > > The base of the UDEV device file system is: /dev/.udev > > Versions adequately match for the compiler installed: 4.1.2 > and the compiler used in kernel assembly: 4.1.2 > > > > Minimal compiling resources appear complete: > make utility - /usr/bin/make > Compiler version 4.1 > linuc_headers base folder /lib/modules/2.6.23.1-42.fc8/build > > However some compilations and executable functions may need additional files, > in the FileNames.h (so called kernel "h"eaders) collection installed > in /usr/include/ . > For martian_modem, additional required packages are libc6-dev (and > for Debian/Ubuntu, linux-libc-dev). The also required headers of > package libc6 are commonly installed by default. > > > > If a driver compilation fails, with message including some lack of > some FileName.h (stdio.h for example), then > Some additional kernel-header files need installation to /usr/include. > The minimal additional packages are libc6-dev > and any of its dependents, under Ubuntu linux-libc-dev > > If an alternate ethernet connection is available, > $ apt-get update > $ apt-get -s install linux-kernel-devel > will install needed pacakage > For Debian/Ubuntu related distributions, run the following command to > display the needed package list: > > Otherwise packages have to be found through http://packages.ubuntu.com > Once downloaded and transferred into a Linux partition, > they can be installed alltogether with: > $ sudo dpkg -i *.deb > > > Checking pppd properties: > -r-xr-xr-x 1 root root 312332 2006-12-01 18:54 /usr/sbin/pppd > > In case of an "error 17" "serial loopback" problem, see: > http://phep2.technion.ac.il/linmodems/archive-sixth/msg02637.html > > To enable dialout without Root permission do: > $ su - root (not for Ubuntu) > chmod a+x /usr/sbin/pppd > or under Ubuntu related Linuxes > chmod a+x /usr/sbin/pppd > > Checking settings of: /etc/ppp/options > lock > > In case of a message like: > Warning: Could not modify /etc/ppp/pap-secrets: Permission denied > see http://linmodems.technion.ac.il/bigarch/archive-sixth/msg04656.html > > > Don't worry about the following, it is for the experts > should trouble shooting be necessary. > ========================================================== > > Checking for modem support lines: > -------------------------------------- > /device/modem symbolic link: > slmodemd created symbolic link /dev/ttySL0: > Within /etc/udev/ files: > /etc/udev/rules.d/50-udev-default.rules:KERNEL=="mwave", NAME="modems/mwave", > GROUP="uucp" > Within /etc/modprobe.conf files: > > Within any ancient /etc/devfs files: > > Within ancient kernel 2.4.n /etc/module.conf files: > > --------- end modem support lines -------- >
