Erik
Your initial problem is:
--- Bootup diagnostics for card in PCI slot 00:02.6 ----
[ 20.590224] ACPI: PCI Interrupt 0000:00:02.6[C] -> GSI 18 (level,
low) -> IRQ 17
[ 20.590231] ACPI: PCI interrupt for device 0000:00:02.6 disabled
The PCI slot 00:02.6 of the modem card may be disabled early in
a bootup process, but then enabled later. If modem drivers load
but the modem is not responsive, read Bootup.txt about possible fixes.
Send dmesg.txt along with ModemData.txt to discuss@xxxxxxxxxxxxx
if help is needed.
-----------------------
Try the options in Bootup.txt to enable the modem hardware.
Once that is achieved, support for
Class 0703: 1039:7013 Modem: Silicon Integrated Systems [SiS] AC'97
Modem Controller
Primary PCI_id 1039:7013
Subsystem PCI_id 1025:0083
Softmodem codec or chipset from diagnostics:
from Archives: SIL2f
should be OK through
Download from http://linmodems.technion.ac.il/packages/smartlink/
the package SLMODEMD.gcc4.1.tar.gz having a compiled slmodemd. Unpack
under Linux with:
$ tar zxf SLMODEMD.gcc4.1.tar.gz
and read instructions therein. But briefly, the modem is setup with
command:
sudo slmodemd -c YOUR_COUNTRY --alsa modem:1
reporting dynamic creation of ports:
/dev/ttySL0 --> /dev/pts/N , with N some number
Read Smartlink.txt and Modem/YourSystem.txt for follow through guidance.
MarvS
scanModem maintainer
On Jan 2, 2008 6:36 PM, Erik Fredriksen <rolferikfredriksen@xxxxxxxxx> wrote:
> I hope I formatted this email ok... anyways, as i'm sure you can tell i
> would just like to know if my winmodem will be able to function in
> linux... Ubuntu Gutsy, specifically. Thanks so much for any help!
> -Erik
>
>
> modemdata:
>
> Only plain text email is forwarded by the Discuss@xxxxxxxxxxxxx List
> Server,
> as HTML can contain viruses. Use as the email Subject Line:
> YourName, YourCountry kernel 2.6.22-12-generic
> With this Subject Line cogent experts will be alerted, and useful case
> names left in the Archive.
> YourCountry will enable Country specific guidance. Your contry's local
> Linux experts
> can be found through: http://www.linux.org/groups/index.html
> Responses from Discuss@xxxxxxxxxxxxx are sometimes blocked by an
> Internet Provider mail filters.
> So in a day, also check the Archived responses at http://www.linmodems.org
> -------------------------- System information ----------------------------
> CPU=i686,
> Linux version 2.6.22-12-generic (buildd@vernadsky) (gcc version 4.1.3
> 20070831 (prerelease) (Ubuntu 4.1.2-16ubuntu1)) #1 SMP Sun Sep 23
> 18:11:30 GMT 2007
> scanModem update of: 2008_01_01
>
>
> There are no blacklisted modem drivers in /etc/modprobe* files
>
> The Advanced Linux Sound Architecture (ALSA) packages providing audio
> support,
> also includes drivers for some modems. The ALSA diagnostics are written
> during
> bootup to /proc/asound/ folders.
>
>
> The /proc/asound/pcm file reports:
> -----------------------
> 00-01: Intel ICH - MIC ADC : SiS SI7012 - MIC ADC : capture 1
> 00-00: Intel ICH : SiS SI7012 : playback 1 : capture 1
>
> about /proc/asound/cards:
> ------------------------
> 0 [SI7012 ]: ICH - SiS SI7012
> SiS SI7012 with ALC203 at irq 17
>
> USB modem not detected by lsusb
>
> For candidate card in slot 00:02.6, firmware information and bootup
> diagnostics are:
> PCI slot PCI ID SubsystemID Name
> ---------- --------- --------- --------------
> 00:02.6 1039:7013 1025:0083 Modem: Silicon Integrated Systems
> [SiS] AC'97 Modem Controller
>
> Modem interrupt assignment and sharing:
> 17: 0 IO-APIC-fasteoi SiS SI7012
> --- Bootup diagnostics for card in PCI slot 00:02.6 ----
> [ 20.590224] ACPI: PCI Interrupt 0000:00:02.6[C] -> GSI 18 (level,
> low) -> IRQ 17
> [ 20.590231] ACPI: PCI interrupt for device 0000:00:02.6 disabled
>
> The PCI slot 00:02.6 of the modem card may be disabled early in
> a bootup process, but then enabled later. If modem drivers load
> but the modem is not responsive, read Bootup.txt about possible fixes.
> Send dmesg.txt along with ModemData.txt to discuss@xxxxxxxxxxxxx
> if help is needed.
>
>
>
> === Finished modem firmware and bootup diagnostics section. ===
> === Next deducing cogent software ===
>
>
>
> For candidate modem in PCI bus: 00:02.6
> Class 0703: 1039:7013 Modem: Silicon Integrated Systems [SiS] AC'97
> Modem Controller
> Primary PCI_id 1039:7013
> Subsystem PCI_id 1025:0083
> Softmodem codec or chipset from diagnostics:
> from Archives: SIL2f
>
>
> Lacking a dsp (digital signal processing) chip, the modem is a software
> intensive or "softmodem" type. Its primary controller manages the traffic
> with the CPU. But the software needed is specified in the Subsystem.
> -----------------------------------------
> Support type needed or chipset: slmodemd
>
> An ALSA (Advanced Linux Sound Architecture) modem driver: snd-intel8x0m
> provides Low Level support enabling contact with the modem hardware.
> For all BUT Conexant chip soft modems (using hsfmodem software)
> complementary High Level support is through a Smartlink utility: slmodemd
>
> Download from http://linmodems.technion.ac.il/packages/smartlink/
> the package SLMODEMD.gcc4.1.tar.gz having a compiled slmodemd. Unpack
> under Linux with:
> $ tar zxf SLMODEMD.gcc4.1.tar.gz
> and read instructions therein. But briefly, the modem is setup with
> command:
> sudo slmodemd -c YOUR_COUNTRY --alsa modem:1
> reporting dynamic creation of ports:
> /dev/ttySL0 --> /dev/pts/N , with N some number
> Read Smartlink.txt and Modem/YourSystem.txt for follow through guidance.
>
> ----------------end Softmodem section --------------
> Writing Smartlink.txt
> ============ end Smartlink section =====================
>
> Completed candidate modem analyses.
>
> The base of the UDEV device file system is: /dev/.udev
>
> Versions adequately match for the compiler installed: 4.1.3
> and the compiler used in kernel assembly: 4.1.3
>
>
>
> Minimal compiling resources appear complete:
> make utility - /usr/bin/make
> Compiler version 4.1
> linuc_headers base folder /lib/modules/2.6.22-12-generic/build
>
> However some compilations and executable functions may need additional
> files,
> in the FileNames.h (so called kernel "h"eaders) collection installed
> in /usr/include/ .
> For martian_modem, additional required packages are libc6-dev (and for
> Debian/Ubuntu, linux-libc-dev). The also required headers of package
> libc6 are commonly installed by default.
>
>
>
> If a driver compilation fails, with message including some lack of some
> FileName.h (stdio.h for example), then
> Some additional kernel-header files need installation to /usr/include.
> The minimal additional packages are libc6-dev
> and any of its dependents, under Ubuntu linux-libc-dev
>
> If an alternate ethernet connection is available,
> $ apt-get update
> $ apt-get -s install linux-kernel-devel
> will install needed package
> For Debian/Ubuntu related distributions, run the following command to
> display the needed package list:
>
> Otherwise packages have to be found through http://packages.ubuntu.com
> Once downloaded and transferred into a Linux partition,
> they can be installed alltogether with:
> $ sudo dpkg -i *.deb
>
>
> Checking pppd properties:
> -rwsr-xr-- 1 root dip 265088 2007-05-15 05:42 /usr/sbin/pppd
>
> In case of an "error 17" "serial loopback" problem, see:
> http://phep2.technion.ac.il/linmodems/archive-sixth/msg02637.html
>
> To enable dialout without Root permission do:
> $ su - root (not for Ubuntu)
> sudo chmod a+x /usr/sbin/pppd
> or under Ubuntu related Linuxes
> sudo chmod a+x /usr/sbin/pppd
>
> Checking settings of: /etc/ppp/options
> asyncmap 0
> noauth
> crtscts
> lock
> hide-password
> modem
> proxyarp
> lcp-echo-interval 30
> lcp-echo-failure 4
> noipx
>
> In case of a message like:
> Warning: Could not modify /etc/ppp/pap-secrets: Permission denied
> see http://linmodems.technion.ac.il/bigarch/archive-sixth/msg04656.html
>
> Read Modem/YourSystem.txt concerning other COMM channels: eth0
> Which can interfere with Browser naviagation.
>
> Don't worry about the following, it is for the experts
> should trouble shooting be necessary.
> ==========================================================
>
> Checking for modem support lines:
> --------------------------------------
> /device/modem symbolic link:
> slmodemd created symbolic link /dev/ttySL0:
> Within /etc/udev/ files:
>
> Within /etc/modprobe.conf files:
> /etc/modprobe.d/blacklist-modem:# Uncomment these entries in order to
> blacklist unwanted modem drivers
> /etc/modprobe.d/blacklist-modem:# blacklist snd-atiixp-modem
> /etc/modprobe.d/blacklist-modem:# blacklist snd-via82xx-modem
> /etc/modprobe.d/alsa-base:options snd-atiixp-modem index=-2
> /etc/modprobe.d/alsa-base:options snd-via82xx-modem index=-2
> Within any ancient /etc/devfs files:
>
> Within ancient kernel 2.4.n /etc/module.conf files:
>
> --------- end modem support lines --------
>
>
>
