Hello,
I need help with installation of Winmodem at Linux,
I am a beginner to Linux.
Thank you in advance
Umutay
Only plain text email is forwarded by the Discuss@xxxxxxxxxxxxx List Server,
as HTML can contain viruses. Use as the email Subject Line:
YourName, YourCountry PCLinuxOS release 2007 (PCLinuxOS) for i586
Kernel 2.6.18.8.tex5.lgc on an i686 / kernel 2.6.18.8.tex5.lgc
With this Subject Line cogent experts will be alerted, and useful case names left in the Archive.
YourCountry will enable Country specific guidance. Your contry's local Linux experts
can be found through: http://www.linux.org/groups/index.html
Responses from Discuss@xxxxxxxxxxxxx are sometimes blocked by an Internet Provider mail filters.
So in a day, also check the Archived responses at http://www.linmodems.org
-------------------------- System information ----------------------------
CPU=i686, PCLinuxOS release 2007 (PCLinuxOS) for i586
Kernel 2.6.18.8.tex5.lgc on an i686 /
Linux version 2.6.18.8.tex5.lgc (vaughan@localhost) (gcc version 4.1.1 20060724 (prerelease) (4.1.1-4pclos2007)) #1 Thu May 10 11:55:36 WST 2007
scanModem update of: 2007-12-07
There are no blacklisted modem drivers in /etc/modprobe* files
The Advanced Linux Sound Architecture (ALSA) packages providing audio support on your System,
also includes drivers for some modems. High Definition Audio (HDA) cards can themselves host
a softmodem chipset, with both audio+modem supported by a snd-hda-intel driver.
The ALSA diagnostics are written during bootup to /proc/asound/ folders.
Modem not detected though HDA card diagnostics, though not excluding
a possible Conexant modem chip impervious to ALSA diagnostics.
Proceeding through alternative possibilties.
Summary card and chipset information is in:
/proc/asound/cards:
--- no soundcards ---
/proc/asound/pcm:
A copy of /proc/asound had been copied to Modem/ALSAumutay.tgz
USB modem not detected by lsusb
For candidate card, firmware information and bootup diagnostics are:
PCI slot PCI ID SubsystemID Name
---------- --------- --------- --------------
01:07.0 1057:3052 1057:3020 Modem: Motorola SM56 Data Fax Modem
Modem interrupt assignment and sharing:
--- Bootup diagnostics for card in PCI slot 01:07.0 ----
=== Finished modem firmware and bootup diagnostics section. ===
=== Next deducing cogent software ===
There is candidate modem software.
For candidate modem in PCI bus: 01:07.0
Class 0703: 1057:3052 Modem: Motorola SM56 Data Fax Modem
Primary PCI_id 1057:3052
Support type needed or chipset: slamr
1057:3052 has a Motorola chipset, poorly supported by Motorola itself
However Zello discovered that drivers written to support Smartlink modems do support the 1057:3052 chipset!!
It sufficed to add 1057:3052 to the list of modem cards recognized by the Smartlink slamr driver.
There is a ungrab-winmodem driver used in conjunction with slamr, which must have 1057:3052
similarly added. See messages from Zello:
http://linmodems.technion.ac.il/bigarch/archive-seventh/msg00846.html
http://linmodems.technion.ac.il/bigarch/archive-seventh/msg00848.html
and Alvaro Aguirre about the ungrab-winmodem fix:
http://linmodems.technion.ac.il/bigarch/archive-seventh/msg00990.html
For general guidance on ungrab-winmodem + slamr usage, read the Smartlink.txt
The modem is supported by the Smartlink slamr driver
plus the slmodemd helper utility. Read the
Smartlink.txt and Modem/YourSystem.txt for follow through guidance.
For 2.6.18.8.tex5.lgc compiling drivers is necessary. As of October 2007 the current packages at
http://linmodems.technion.ac.il/packages/smartlink/ are the
ungrab-winmodem-20070505.tar.gz and slmodem-2.9.11-20070813.tar.gz
Writing Smartlink.txt
============ end Smartlink section =====================
Completed candidate modem analyses.
The base of the UDEV device file system is: /dev/.udev
/dev/.udevdb
Versions adequately match for the compiler installed: 4.1.1
and the compiler used in kernel assembly: 4.1.1
Minimal compiling resources appear complete:
make utility - /usr/bin/make
Compiler version 4.1
linuc_headers base folder /lib/modules/2.6.18.8.tex5.lgc/build
However some compilations and executable functions may need additional files,
in the FileNames.h (so called kernel "h"eaders) collection installed in /usr/include/ .
For martian_modem, additional required packages are libc6-dev (and for Debian/Ubuntu, linux-libc-dev). The also required headers of package libc6 are commonly installed by default.
If a driver compilation fails, with message including some lack of some FileName.h (stdio.h for example), then
Some additional kernel-header files need installation to /usr/include. The minimal additional packages are libc6-dev
and any of its dependents, under Ubuntu linux-libc-dev
If an alternate ethernet connection is available,
$ apt-get update
$ apt-get -s install linux-kernel-devel
will install needed pacakage
For Debian/Ubuntu related distributions, run the following command to display the needed package list:
Otherwise packages have to be found through http://packages.ubuntu.com
Once downloaded and transferred into a Linux partition,
they can be installed alltogether with:
$ sudo dpkg -i *.deb
Checking pppd properties:
-rwsr-xr-t 1 root root 304536 Nov 7 2006 /usr/sbin/pppd
In case of an "error 17" "serial loopback" problem, see:
http://phep2.technion.ac.il/linmodems/archive-sixth/msg02637.html
To enable dialout without Root permission do:
$ su - root (not for Ubuntu)
chmod a+x /usr/sbin/pppd
or under Ubuntu related Linuxes
chmod a+x /usr/sbin/pppd
Checking settings of: /etc/ppp/options
In case of a message like:
Warning: Could not modify /etc/ppp/pap-secrets: Permission denied
see http://linmodems.technion.ac.il/bigarch/archive-sixth/msg04656.html
Don't worry about the following, it is for the experts
should trouble shooting be necessary.
==========================================================
Checking for modem support lines:
--------------------------------------
/device/modem symbolic link:
slmodemd created symbolic link /dev/ttySL0:
Within /etc/udev/ files:
Within /etc/modprobe.conf files:
Within any ancient /etc/devfs files:
Within ancient kernel 2.4.n /etc/module.conf files:
--------- end modem support lines --------
