I am running Ubuntu on an old PC.
Below is the contents of ModemData produced by scanModem.
Would some kind soul please tell me *exactly* what I must now do in
order to be able to dial up from my modem?
I have an ISP number and login.
When I connect to the ISP from an XP laptop, I set the connection to
"obtain an IP address automatically" and "obtain DNS server address
automatically".
How do I do this from Ubuntu?
Thanks a lot.
----------------------------------------------------------------
Only plain text email is forwarded by the Discuss@xxxxxxxxxxxxx List
Server,
as HTML can contain viruses. Use as the email Subject Line:
YourName, YourCountry kernel 2.6.22-14-generic
With this Subject Line cogent experts will be alerted, and useful case
names left in the Archive.
YourCountry will enable Country specific guidance. Your contry's local
Linux experts
can be found through: http://www.linux.org/groups/index.html
Responses from Discuss@xxxxxxxxxxxxx are sometimes blocked by an
Internet Provider mail filters.
So in a day, also check the Archived responses at
http://www.linmodems.org
-------------------------- System information
----------------------------
CPU=i686,
Linux version 2.6.22-14-generic (buildd@palmer) (gcc version 4.1.3
20070929 (prerelease) (Ubuntu 4.1.2-16ubuntu2)) #1 SMP Sun Oct 14
23:05:12 GMT 2007
scanModem update of: 2007-20-07
There are no blacklisted modem drivers in /etc/modprobe* files
The Advanced Linux Sound Architecture (ALSA) packages providing audio
support on your System,
also includes drivers for some modems. High Definition Audio (HDA) cards
can themselves host
a softmodem chipset, with both audio+modem supported by a snd-hda-intel
driver.
The ALSA diagnostics are written during bootup to /proc/asound/ folders.
Modem not detected though HDA card diagnostics, though not excluding
a possible Conexant modem chip impervious to ALSA diagnostics.
Proceeding through alternative possibilties.
Summary card and chipset information is in:
/proc/asound/cards:
0 [AudioPCI ]: ENS1371 - Ensoniq AudioPCI
Ensoniq AudioPCI ENS1371 at 0x1040, irq 11
/proc/asound/pcm:
00-01: ES1371/2 : ES1371 DAC1 : playback 1
00-00: ES1371/1 : ES1371 DAC2/ADC : playback 1 : capture 1
A copy of /proc/asound had been copied to Modem/ALSAroot.tgz
USB modem not detected by lsusb
For candidate card, firmware information and bootup diagnostics are:
PCI slot PCI ID SubsystemID Name
---------- --------- --------- --------------
00:10.0 12b9:1006 12b9:007f Communication controller: 3Com Corp, Modem
Division WinModem
Modem interrupt assignment and sharing:
11: 3781 XT-PIC-XT uhci_hcd:usb1, Ensoniq AudioPCI,
eth0
--- Bootup diagnostics for card in PCI slot 00:10.0 ----
[ 62.805867] PCI: Sharing IRQ 11 with 0000:00:10.0
=== Finished modem firmware and bootup diagnostics section. ===
=== Next deducing cogent software ===
There is candidate modem software.
For candidate modem in PCI bus: 00:10.0
Class 0780: 12b9:1006 Communication controller: 3Com Corp, Modem
Division WinModem
Primary PCI_id 12b9:1006
Support type needed or chipset: 3COM.winmodem
Under Linux 2.6.n kernels, the chipset is NOT SUPPORTED . Read
InfoGeneral.txt about alternatives.
Vendor 10b7 3COM Inc. purchased the vendor 12b9 US Robotics modem
technology.
Their winmodems have no Linux support. Their controller chipset modems
are supported by the Linux serial drivers.
The PCI id 12b9:1006 modem is Not_Supported.
PCI ID Name Support status
------------------------------------------------------------------------
-------
10b7:1006 3COM 0038TA AC101 - TF Mini-PCI winmodem, not supported
10b7:1007 3COM 3C556 V.90 Mini-PCI winmodem, not supported
12b9:1006 US Robotics 3cp803598 Voice winmodem, not supported
12b9:1007 US Robotics ERL3263A-0 DF GWPCI PC99 winmodem, not supported
12b9:0062 US Robotics erk41926a-0.6 usr 56k serial driver supported
12b9:1008 US Robotics 3cp803598 serial driver supported
====== end 3COM section =======
Completed candidate modem analyses.
The base of the UDEV device file system is: /dev/.udev
Versions adequately match for the compiler installed: 4.1.3
and the compiler used in kernel assembly: 4.1.3
Minimal compiling resources appear complete:
make utility - /usr/bin/make
Compiler version 4.1
linuc_headers base folder /lib/modules/2.6.22-14-generic/build
However some compilations and executable functions may need additional
files,
in the FileNames.h (so called kernel "h"eaders) collection installed in
/usr/include/ .
For martian_modem, additional required packages are libc6-dev (and for
Debian/Ubuntu, linux-libc-dev). The also required headers of package
libc6 are commonly installed by default.
If a driver compilation fails, with message including some lack of some
FileName.h (stdio.h for example), then
Some additional kernel-header files need installation to /usr/include.
The minimal additional packages are libc6-dev
and any of its dependents, under Ubuntu linux-libc-dev
If an alternate ethernet connection is available,
$ apt-get update
$ apt-get -s install linux-kernel-devel
will install needed pacakage
For Debian/Ubuntu related distributions, run the following command to
display the needed package list:
Otherwise packages have to be found through http://packages.ubuntu.com
Once downloaded and transferred into a Linux partition,
they can be installed alltogether with:
$ sudo dpkg -i *.deb
Checking pppd properties:
-rwsr-xr-- 1 root dip 269256 2007-10-04 21:57 /usr/sbin/pppd
In case of an "error 17" "serial loopback" problem, see:
http://phep2.technion.ac.il/linmodems/archive-sixth/msg02637.html
To enable dialout without Root permission do:
$ su - root (not for Ubuntu)
sudo chmod a+x /usr/sbin/pppd
or under Ubuntu related Linuxes
sudo chmod a+x /usr/sbin/pppd
Checking settings of: /etc/ppp/options
asyncmap 0
noauth
crtscts
lock
hide-password
modem
proxyarp
lcp-echo-interval 30
lcp-echo-failure 4
noipx
In case of a message like:
Warning: Could not modify /etc/ppp/pap-secrets: Permission denied
see http://linmodems.technion.ac.il/bigarch/archive-sixth/msg04656.html
Read Modem/YourSystem.txt concerning other COMM channels: eth0
Which can interfere with Browser naviagation.
Don't worry about the following, it is for the experts
should trouble shooting be necessary.
==========================================================
Checking for modem support lines:
--------------------------------------
/device/modem symbolic link:
slmodemd created symbolic link /dev/ttySL0:
Within /etc/udev/ files:
Within /etc/modprobe.conf files:
/etc/modprobe.d/blacklist-modem:# Uncomment these entries in order to
blacklist unwanted modem drivers
/etc/modprobe.d/blacklist-modem:# blacklist snd-atiixp-modem
/etc/modprobe.d/blacklist-modem:# blacklist snd-via82xx-modem
/etc/modprobe.d/alsa-base:options snd-atiixp-modem index=-2
/etc/modprobe.d/alsa-base:options snd-via82xx-modem index=-2
Within any ancient /etc/devfs files:
Within ancient kernel 2.4.n /etc/module.conf files:
--------- end modem support lines --------
*************************************************************************************
This e-mail is confidential, the property of NDS Ltd and intended for the addressee only. Any dissemination, copying or distribution of this message or any attachments by anyone other than the intended recipient is strictly prohibited. If you have received this message in error, please immediately notify the postmaster@xxxxxxx and destroy the original message. Messages sent to and from NDS may be monitored. NDS cannot guarantee any message delivery method is secure or error-free. Information could be intercepted, corrupted, lost, destroyed, arrive late or incomplete, or contain viruses. We do not accept responsibility for any errors or omissions in this message and/or attachment that arise as a result of transmission. You should carry out your own virus checks before opening any attachment. Any views or opinions presented are solely those of the author and do not necessarily represent those of NDS.
NDS Limited Registered office: One Heathrow Boulevard, 286 Bath Road, West Drayton, Middlesex, UB7 0DQ, United Kingdom. A company registered in England and Wales Registered no. 3080780 VAT no. GB 603 8808 40-00
To protect the environment please do not print this e-mail unless necessary.
**************************************************************************************
