P.Tod, Germany, kernel 2.6.22-14-generic

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



Hi,
this is the first time I am trying to transform a Winmodem into a Linmodem, so I really need some help to get startet.

Here is the output of scanModem, first of all:

=============================================================================
===========================================================================
  
--------------------------  System information ----------------------------
CPU=i686,  
Linux version 2.6.22-14-generic (buildd@palmer) (gcc version 4.1.3 20070929 (prerelease) (Ubuntu 4.1.2-16ubuntu2)) #1 SMP Sun Oct 14 23:05:12 GMT 2007
 scanModem update of:  20071109


 There are no blacklisted modem drivers in /etc/modprobe*  files 

The Advanced Linux Sound Architecture (ALSA) packages providing audio support on your System, 
also includes drivers for some modems. High Definition Audio (HDA) cards can themselves host
a softmodem chipset, with both audio+modem supported by a snd-hda-intel driver.
The ALSA diagnostics are written during bootup to /proc/asound/ folders.


 The modem codec file for the the HDA card is: /proc/asound/card0/codec#1
--------------------------------------------------------
Codec: Motorola Si3054
Address: 1
Vendor Id: 0x10573055
Subsystem Id: 0x10573055
Revision Id: 0x100700

 The audio card hosts a softmodem chip with Vendor ID:  0x10573055
Summary card and chipset information is in: 
/proc/asound/cards:
 0 [Intel          ]: HDA-Intel - HDA Intel
                      HDA Intel at 0xf8400000 irq 23

/proc/asound/pcm:
00-06: Si3054 Modem : Si3054 Modem : playback 1 : capture 1
00-00: HDA Generic : HDA Generic : playback 1 : capture 1

 A copy of /proc/asound had been copied to Modem/ALSAroot.tgz
USB modem not detected by lsusb

For candidate card, firmware information and bootup diagnostics are:

 PCI slot	PCI ID		SubsystemID	Name
 ----------	---------	---------	--------------
 00:1b.0	8086:284b	14c0:0025	Audio device: Intel Corporation 82801H 

 Modem interrupt assignment and sharing: 
 23:        609        588   IO-APIC-fasteoi   HDA Intel
 --- Bootup diagnostics for card in PCI slot 00:1b.0 ----
[   26.968000] ACPI: PCI Interrupt 0000:00:1b.0[A] -> GSI 20 (level, low) -> IRQ 23
[   26.968000] PCI: Setting latency timer of device 0000:00:1b.0 to 64

 === Finished modem firmware and bootup diagnostics section. ===
 === Next deducing cogent software ===

  The High Defintion Audio card with PCI ID 8086:284b may host a soft modem chip.

There is candidate modem software.

 For candidate modem in PCI bus:  00:1b.0
   Class 0403: 8086:284b Audio device: Intel Corporation 82801H
      Primary PCI_id  8086:284b
    Subsystem PCI_id  14c0:0025 
    Softmodem codec or chipset from diagnostics: Motorola_Si3054, a Motorola type.
                               from    Archives: 
                        

 This is a NEW softmodem case!  Please send the output ModemData.txt 
 to DISCUSS@xxxxxxxxxxxxx to enrich the Archive and help others!
 If further assistance is not needed, please use email Subject:
     New Case Only
 -------------------------------------------
 Lacking a dsp (digital signal processing) chip, the modem is a software 
 intensive or "softmodem" type. Its primary controller manages the traffic 
 with the CPU. But the software needed is specified in the Subsystem.
 -----------------------------------------
Support type needed or chipset:	slmodemd supporting the snd-hda-intel audio+modem driver

 An ALSA (Advanced Linux Sound Architecture) modem driver:  snd-hda-intel
 provides Low Level support enabling contact with the modem hardware.
 For all BUT Conexant chip soft modems (using hsfmodem software)
 complementary High Level support is through a Smartlink utility:  slmodemd

 Download from http://linmodems.technion.ac.il/packages/smartlink/ 
 the package SLMODEMD.gcc4.1.tar.gz having a compiled slmodemd. Unpack under Linux with:
 	$ tar zxf SLMODEMD.gcc4.1.tar.gz
 and read instructions therein. But briefly, the modem is setup with command:
 	sudo slmodemd -c YOUR_COUNTRY --alsa hw:0,6 
 reporting dynamic creation of ports:
	/dev/ttySL0 --> /dev/pts/N   , with N some number
 Read Smartlink.txt and Modem/YourSystem.txt for follow through guidance.

 Already loaded into the kernel is snd-hda-intel and audio drivers it depends on,
 displayed by:	lsmod | grep snd_hda_intel
Module                  Size  Used by
-------------------------------------
snd_hda_intel         263712  1 
snd_pcm                80388  2 snd_hda_intel,snd_pcm_oss
snd                    54660  11 snd_hda_intel,snd_pcm_oss,snd_mixer_oss,snd_pcm,snd_seq_oss,snd_rawmidi,snd_seq,snd_timer,snd_seq_device
snd_page_alloc         11400  2 snd_hda_intel,snd_pcm


The diagnostic outputs for this softmodem section have their raw information in
folders and text files under /proc/asound/ which you can browse. The information
is from files:
	/proc/asound/pcm
-------------------------------
00-06: Si3054 Modem : Si3054 Modem : playback 1 : capture 1
00-00: HDA Generic : HDA Generic : playback 1 : capture 1

	/proc/asound/modules
-------------------------------
 0 snd_hda_intel
	10573055
-------------------------------

-------------------------------
Current support status of HDA cards is:
  Vendor IDs  Chip maker     Support type 
  ----------  ----------    -------------
  0x14f12bfa  Conexant      hsfmodem , not slmodemd compatible
  0x14f12c06  Conexant      hsfmodem , not slmodemd compatible
  0x11c1040  AgereSystems  snd-hda-intel + slmodemd, support not estabished
  All others currently supported
	/proc/asound/card0/codec#1
-------------------------------


and from the command:
	aplay -l | grep -i modem
Karte 0: Intel [HDA Intel], Gerät 6: Si3054 Modem [Si3054 Modem]

----------------end Softmodem section --------------

Writing Intel.txt
Writing Smartlink.txt
============ end Smartlink section =====================

 Completed candidate modem analyses.

 The base of the UDEV device file system is: /dev/.udev

 Versions adequately match for the compiler installed: 4.1.3
             and the compiler used in kernel assembly: 4.1.3


 
 Minimal compiling resources appear complete:
   make utility - /usr/bin/make
   Compiler version 4.1
   linuc_headers base folder /lib/modules/2.6.22-14-generic/build

 However some compilations and executable functions may need additional files,
 in the FileNames.h (so called kernel "h"eaders) collection installed in  /usr/include/ .
 For martian_modem, additional required packages are libc6-dev (and for Debian/Ubuntu,  linux-libc-dev). The also required headers of package libc6 are commonly installed by default. 



If a driver compilation fails, with message including some lack of some FileName.h (stdio.h for example), then
Some additional kernel-header files need installation to /usr/include. The minimal additional packages are libc6-dev
and any of its dependents, under Ubuntu linux-libc-dev

If an alternate ethernet connection is available,
$  apt-get update
$  apt-get -s install linux-kernel-devel
will install needed pacakage
For Debian/Ubuntu related distributions, run the following command to display the needed package list:

Otherwise packages have to be found through http://packages.ubuntu.com
Once downloaded and transferred into a Linux partition,
they can be installed alltogether with:
$ sudo dpkg -i *.deb


Checking pppd properties:
	-rwsr-xr-- 1 root dip 269256 2007-10-04 21:57 /usr/sbin/pppd

In case of an "error 17" "serial loopback" problem, see:
    http://phep2.technion.ac.il/linmodems/archive-sixth/msg02637.html

To enable dialout without Root permission do:
	$ su - root  (not for Ubuntu)
        sudo chmod a+x /usr/sbin/pppd
or under Ubuntu related Linuxes
	sudo chmod a+x /usr/sbin/pppd

Checking settings of:	/etc/ppp/options
asyncmap 0
noauth
crtscts
lock
hide-password
modem
proxyarp
lcp-echo-interval 30
lcp-echo-failure 4
noipx

In case of a message like:
   Warning: Could not modify /etc/ppp/pap-secrets: Permission denied
see http://linmodems.technion.ac.il/bigarch/archive-sixth/msg04656.html


 Don't worry about the following, it is for the experts
 should trouble shooting be necessary.
==========================================================

 Checking for modem support lines:
 --------------------------------------
     /device/modem symbolic link:   
slmodemd created symbolic link /dev/ttySL0:  
     Within /etc/udev/ files:

     Within /etc/modprobe.conf files:
/etc/modprobe.d/alsa-base:options snd-atiixp-modem index=-2
/etc/modprobe.d/alsa-base:options snd-via82xx-modem index=-2
/etc/modprobe.d/blacklist-modem:# Uncomment these entries in order to blacklist unwanted modem drivers
/etc/modprobe.d/blacklist-modem:# blacklist snd-atiixp-modem
/etc/modprobe.d/blacklist-modem:# blacklist snd-via82xx-modem
     Within any ancient /etc/devfs files:

     Within ancient kernel 2.4.n /etc/module.conf files:

--------- end modem support lines --------

===========================================================================
===========================================================================

Moreover, I found out that drivers (also for Linux) are available here:
http://www.motorola.com/softmodem/sm56_download.htm

But they only provide rpm-packages.

Regards,
P.Tod 
-- 
Der GMX SmartSurfer hilft bis zu 70% Ihrer Onlinekosten zu sparen! 
Ideal für Modem und ISDN: http://www.gmx.net/de/go/smartsurfer

[Index of Archives]     [Linux Media Development]     [Asterisk]     [DCCP]     [Netdev]     [X.org]     [Xfree86]     [Fedora Women]     [Linux USB]

  Powered by Linux