Marvin, There is a precompiled slamr for Ubuntu that matches your kernel atthe smartlink section in LinModems Resource Page http://linmodems.technion.ac.il/packages/smartlink/Ubuntu/ In looking at your tries I see that there is ungrab-winmodem marvin@notebook:~$ cd slamr-2.6.12-9-386bash: cd: slamr-2.6.12-9-386: No such file or directorymarvin@notebook:~$ cd ~/Desktopmarvin@notebook:~/Desktop$ cd slamr-2.6.12-9-386marvin@notebook:~/Desktop/slamr-2.6.12-9-386$ ls1st_Read.txtCountryList.txtlibasound2_1.0.10-2ubuntu4_i386.debsetupslamr.koslmodemdsl-modem-daemon_2.9.10+2.9.9d-6ubuntu1_i386.debslmodem.txtslusb.koungrab-winmodem.kounloadingwvdial.confmarvin@notebook:~/Desktop/slamr-2.6.12-9-386$ which prompts the question, why is this being shown? [4295214.525000] slamr: SmartLink AMRMO modem.[4295214.525000] slamr: device 10b9:5457 is grabbed by another driver What is your running kernel?$ uname -aThen look for the slamr package that matches your kernel at the abovepage. Everything should be setup for you. If that does not work,please send your ModemData.txt to list. Thanks, Antonio On 10/11/07, Marvin Penner <marvin@xxxxxxxxxx> wrote:> I ran scanModem and have followed all the instructions I could find. It> said I needed slamr-2.6.12-9-386>> I have tried to install it and this is what I get:>> marvin@notebook:~$ cd slamr-2.6.12-9-386> bash: cd: slamr-2.6.12-9-386: No such file or directory> marvin@notebook:~$ cd ~/Desktop> marvin@notebook:~/Desktop$ cd slamr-2.6.12-9-386> marvin@notebook:~/Desktop/slamr-2.6.12-9-386$ ls> 1st_Read.txt> CountryList.txt> libasound2_1.0.10-2ubuntu4_i386.deb> setup> slamr.ko> slmodemd> sl-modem-daemon_2.9.10+2.9.9d-6ubuntu1_i386.deb> slmodem.txt> slusb.ko> ungrab-winmodem.ko> unloading> wvdial.conf> marvin@notebook:~/Desktop/slamr-2.6.12-9-386$ sudo ./setup> Password:> When asked about your country, Enter:> SOUTHAFICA>> Installing the Debian packages supporting autoloading> (Reading database ... 56672 files and directories currently installed.)> Preparing to replace libasound2 1.0.10-2ubuntu4 (using libasound2_1.0.10-2ubuntu4_i386.deb) ...> Unpacking replacement libasound2 ...> Preparing to replace sl-modem-daemon 2.9.10+2.9.9d-6ubuntu1 (using sl-modem-daemon_2.9.10+2.9.9d-6ubuntu1_i386.deb) ...> Shutting down SmartLink Modem driver normally ... no slmodemd daemon running.> Unloading modem driver from kernel ... slamr.> Unpacking replacement sl-modem-daemon ...> Setting up libasound2 (1.0.10-2ubuntu4) ...>> Setting up sl-modem-daemon (2.9.10+2.9.9d-6ubuntu1) ...> Starting SmartLink Modem driver for: slamr0.> Creating /dev/modem symlink, pointing to: /dev/ttySL0.>>> Copying over newer files> cp: cannot stat `sl-modem-daemon.modutils': No such file or directory> Making folder /lib/modules/2.6.12-9-386/extra> Copying drivers to /lib/modules/2.6.12-9-386/extra> Checking driver install> slamr.ko slusb.ko ungrab-winmodem.ko> Finished installs.> Informing the System>> Starting function tests, loading drivers:> Running diagnostic:>> [4295214.525000] slamr: SmartLink AMRMO modem.> [4295214.525000] slamr: device 10b9:5457 is grabbed by another driver>> ports should be created by:> slmodemd -c SOUTHAFICA /dev/slamr0> error: mdm setup: cannot stat `/dev/slamr0': No such file or directory> error: cannot setup device `/dev/slamr0'> Checking for success> Port creation with slmodemd failed.> Read the Slamr.txt record, other 1st_Read.txt CountryList.txt slmodem.txt files and the sample wvdial.conf.>> marvin@notebook:~/Desktop/slamr-2.6.12-9-386$ sudo ./setup> When asked about your country, Enter:> SOUTHAFICA>> Installing the Debian packages supporting autoloading> (Reading database ... 56672 files and directories currently installed.)> Preparing to replace libasound2 1.0.10-2ubuntu4 (using libasound2_1.0.10-2ubuntu4_i386.deb) ...> Unpacking replacement libasound2 ...> Preparing to replace sl-modem-daemon 2.9.10+2.9.9d-6ubuntu1 (using sl-modem-daemon_2.9.10+2.9.9d-6ubuntu1_i386.deb) ...> Shutting down SmartLink Modem driver normally ... no slmodemd daemon running.> Unloading modem driver from kernel ... slamr.> Unpacking replacement sl-modem-daemon ...> Setting up libasound2 (1.0.10-2ubuntu4) ...>> Setting up sl-modem-daemon (2.9.10+2.9.9d-6ubuntu1) ...> Starting SmartLink Modem driver for: slamr0.> Creating /dev/modem symlink, pointing to: /dev/ttySL0.>>> Copying over newer files> cp: cannot stat `sl-modem-daemon.modutils': No such file or directory> Making folder /lib/modules/2.6.12-9-386/extra> Copying drivers to /lib/modules/2.6.12-9-386/extra> Checking driver install> slamr.ko slusb.ko ungrab-winmodem.ko> Finished installs.> Informing the System>> Starting function tests, loading drivers:> Running diagnostic:>> [4295214.525000] slamr: SmartLink AMRMO modem.> [4295214.525000] slamr: device 10b9:5457 is grabbed by another driver> [4295383.816000] slamr: SmartLink AMRMO modem.> [4295383.822000] slamr: probe 10b9:5457 SL1800 card...> [4295383.822000] slamr: mc97 codec is ADS74> [4295383.822000] slamr: cannot init card.>> ports should be created by:> slmodemd -c SOUTHAFICA /dev/slamr0> error: mdm setup: cannot stat `/dev/slamr0': No such file or directory> error: cannot setup device `/dev/slamr0'> Checking for success> Port creation with slmodemd failed.> Read the Slamr.txt record, other 1st_Read.txt CountryList.txt slmodem.txt files and the sample wvdial.conf.>> marvin@notebook:~/Desktop/slamr-2.6.12-9-386$ Slamr.txt> bash: Slamr.txt: command not found> marvin@notebook:~/Desktop/slamr-2.6.12-9-386$ wvdial.cong.> bash: wvdial.cong.: command not found> marvin@notebook:~/Desktop/slamr-2.6.12-9-386$ su - root> Password:> su: Authentication failure> Sorry.> marvin@notebook:~/Desktop/slamr-2.6.12-9-386$ su - root> Password:> su: Authentication failure> Sorry.> marvin@notebook:~/Desktop/slamr-2.6.12-9-386$ sudo modprobe DriverNames> FATAL: Module DriverNames not found.> marvin@notebook:~/Desktop/slamr-2.6.12-9-386$ sudo modprobe Slamr> FATAL: Module Slamr not found.> marvin@notebook:~/Desktop/slamr-2.6.12-9-386$ sudo modprobe sl-modem> FATAL: Module sl_modem not found.> marvin@notebook:~/Desktop/slamr-2.6.12-9-386$ sudo modprobe Slamrd> FATAL: Module Slamrd not found.> marvin@notebook:~/Desktop/slamr-2.6.12-9-386$ sudo modprobe dlmodemd> FATAL: Module dlmodemd not found.> marvin@notebook:~/Desktop/slamr-2.6.12-9-386$ sudo modprobe slmodemd> FATAL: Module slmodemd not found.> marvin@notebook:~/Desktop/slamr-2.6.12-9-386$ slmodemd --help> Usage: slmodemd [option...] <device>> Where 'device' is name of modem device (default `/dev/slamr0')> and 'option' may be:> -h, --help this usage> -u, --usage this usage> -v, --version show version and exit> -c, --country=VAL default modem country name (default `USA')> --countrylist show list of supported countries> -a, --alsa ALSA mode (see README for howto)> -g, --group=VAL Modem TTY group (default `dialout')> -p, --perm=VAL Modem TTY permission (default `0660')> -n, --nortpriority run with regular priority> -d, --debug=VAL debug level (default `0')> -l, --log=VAL logging mode (default `5')> marvin@notebook:~/Desktop/slamr-2.6.12-9-386$ sudo gedit> marvin@notebook:~/Desktop/slamr-2.6.12-9-386$ sudo gedit /etc/default/sl-modem-daemon> marvin@notebook:~/Desktop/slamr-2.6.12-9-386$ slmodem -c CANADA/dev/slamr0> bash: slmodem: command not found> marvin@notebook:~/Desktop/slamr-2.6.12-9-386$ sudo ./setup> When asked about your country, Enter:> SOUTHAFICA>> Installing the Debian packages supporting autoloading> (Reading database ... 56672 files and directories currently installed.)> Preparing to replace libasound2 1.0.10-2ubuntu4 (using libasound2_1.0.10-2ubuntu4_i386.deb) ...> Unpacking replacement libasound2 ...> Preparing to replace sl-modem-daemon 2.9.10+2.9.9d-6ubuntu1 (using sl-modem-daemon_2.9.10+2.9.9d-6ubuntu1_i386.deb) ...> Shutting down SmartLink Modem driver normally ... no slmodemd daemon running.> Unloading modem driver from kernel ... slamr.> Unpacking replacement sl-modem-daemon ...> Setting up libasound2 (1.0.10-2ubuntu4) ...>> Setting up sl-modem-daemon (2.9.10+2.9.9d-6ubuntu1) ...> Starting SmartLink Modem driver for: slamr0.> Creating /dev/modem symlink, pointing to: /dev/ttySL0.>>> Copying over newer files> cp: cannot stat `sl-modem-daemon.modutils': No such file or directory> Making folder /lib/modules/2.6.12-9-386/extra> Copying drivers to /lib/modules/2.6.12-9-386/extra> Checking driver install> slamr.ko slusb.ko ungrab-winmodem.ko> Finished installs.> Informing the System>> Starting function tests, loading drivers:> Running diagnostic:>> [4295214.525000] slamr: SmartLink AMRMO modem.> [4295214.525000] slamr: device 10b9:5457 is grabbed by another driver> [4295383.816000] slamr: SmartLink AMRMO modem.> [4295383.822000] slamr: probe 10b9:5457 SL1800 card...> [4295383.822000] slamr: mc97 codec is ADS74> [4295383.822000] slamr: cannot init card.> [4295943.169000] slamr: SmartLink AMRMO modem.> [4295943.175000] slamr: probe 10b9:5457 SL1800 card...> [4295943.175000] slamr: mc97 codec is ADS74> [4295943.175000] slamr: cannot init card.>> ports should be created by:> slmodemd -c SOUTHAFICA /dev/slamr0> error: mdm setup: cannot stat `/dev/slamr0': No such file or directory> error: cannot setup device `/dev/slamr0'> Checking for success> Port creation with slmodemd failed.> Read the Slamr.txt record, other 1st_Read.txt CountryList.txt slmodem.txt files and the sample wvdial.conf.>> marvin@notebook:~/Desktop/slamr-2.6.12-9-386$>> I am new to this and I really don't know what most of this means but I> can follow instructions. It seems to me it did not work. What do I need> to do?>> Thanks> Marvin>
