Re: agrsm driver not work for Agere SV92PP(11c10620 AGRSM) in Fedora Core 7

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



Can you try add a option like acpi=off in your bootloader?

Umar Said wrote:
Thanks Jacques

I have also tried wvdialconf, wvdial, minicom, and cu, but none of them
succeeded. Do you know any good tools to debug?

--- Jacques Goldberg <Jacques.Goldberg@xxxxxxx> wrote:

People more expert than me may know much more about your modem, but one thing is certain, setserial has nothing to do with that and minicom is the worst choice (to my taste) to debug a linmodem.

We recommend to use wvdial:
1-one time to configure wvdial with the command
     wvdialconf /etc/wvdial.conf
2-edit /etc/wvdial.conf for the username, phone number and password
given to you by your ISP
For example
;Username = < Your Login Name >
should be changed to
Username = umarsaid
if  umarsaid  is the user name given by uour ISP
Note that the correct line has no  ;   no  <  and no  >
3-run   wvdial   to try to connect
4-you must be root (or su) to use wvdialconf and wvdial

Use   man wvdialconf, man wvdial.conf , and man wvdial for details.

Jacques

Umar Said wrote:
Hi all,

I have the same problem with Agere SV92PP(11c10620 AGRSM) in Debian Etch.
After
I compile the source code successfully and insmod agrmodem.ko and insmod
agrserial.ko, the following message appear in /var/log/message or dmesg.

Oct  8 21:19:49 localhost kernel: PCI: Enabling device 0000:02:0c.0 (0000
->
0001)
Oct  8 21:19:49 localhost kernel: ACPI: PCI Interrupt 0000:02:0c.0[A] ->
GSI 20
(level, low) -> IRQ 217
Oct  8 21:19:49 localhost kernel: agrsm: created 1 infos
Oct  8 21:20:04 localhost kernel: ttyAGS3 at I/O 0xb400 (irq = 217) is a
AgereModem
Oct  8 21:20:04 localhost kernel: agrserial: Loading module Agere Modem
Interface driver version 2.1.60.0.Linspire (2005-11-16)

I conclude that the driver load normally. Then I use minicom and set serial
device to /dev/ttyAGS3 and 115200 8N1. But when I type some AT command,
there
is no response from the modem. Before that, I try the modem in Windows and
type
the same AT command using 115200 8N1 and the modem responded.

Is there anyone successful in using Agere SV92PP(11c10620 AGRSM) under
Linux
especially Debian Etch. Any hints will be appreciated.

Regards,
Umar



____________________________________________________________________________________
Yahoo! oneSearch: Finally, mobile search that gives answers, not web links. http://mobile.yahoo.com/mobileweb/onesearch?refer=1ONXIC



      ____________________________________________________________________________________
Check out the hottest 2008 models today at Yahoo! Autos.
http://autos.yahoo.com/new_cars.html





[Index of Archives]     [Linux Media Development]     [Asterisk]     [DCCP]     [Netdev]     [X.org]     [Xfree86]     [Fedora Women]     [Linux USB]

  Powered by Linux