Hello!
Need help to configure my modem.
I have a Intel 82801H (ICH8 Family) HD Audio Controller, that not works under Linux.
I need a newer version from ALSA sound driver???? Or don't I need the sound card?
I put the ModemData.txt as attachment.
Please help.
Thanx.
Javabee
_______________________________________________________________________
Jetzt neu! Schützen Sie Ihren PC mit McAfee und WEB.DE. 3 Monate
kostenlos testen. http://www.pc-sicherheit.web.de/startseite/?mc=022220
Only plain text email is forwarded by the DISCUSS@xxxxxxxxxxxxx List Server.
Do use the following as the email Subject Line:
SomeName, YourCountry
Welcome to openSUSE 10.2 (i586) - Kernel kernel 2.6.18.2-34-default
This will alert cogent experts, and distinguish cases in the Archives.
YourCountry will enable Country Code guidance.
Occassionally responses are blocked by an Internet Provider mail filters.
So in a day, also check the Archived responses at http://www.linmodems.org .
Local Linux experts can be found through: http://www.linux.org/groups/index.html
-------------------------- System information ----------------------------
CPU=i686,
Welcome to openSUSE 10.2 (i586) - Kernel
Linux version 2.6.18.2-34-default (geeko@buildhost) (gcc version 4.1.2 20061115 (prerelease) (SUSE Linux)) #1 SMP Mon Nov 27 11:46:27 UTC 2006
scanModem update of: 2007_Sept_24
There are no blacklisted modem drivers in /etc/modprobe* files
USB modem not detected by lsusb
Several modems are supported by drivers with ALSA, the Advanced Linux Sound Architecture software.
Copying ALSA diagnostics to Modem/ALSAroot.tgz
ALSAversion = 1.0.13
Modem or candidate host audio card have firmware information and diagnostics:
PCI slot PCI ID SubsystemID Name
---------- --------- --------- --------------
00:1b.0 8086:284b 17aa:20ac Audio device: Intel Corporation 82801H
Modem interrupt assignment and sharing:
98: 1017 1057 IO-APIC-level HDA Intel, ohci1394, uhci_hcd:usb6
--- Bootup diagnostics for card in PCI slot 00:1b.0 ----
ACPI: PCI Interrupt 0000:00:1b.0[B] -> GSI 17 (level, low) -> IRQ 98
PCI: Setting latency timer of device 0000:00:1b.0 to 64
=== Finished modem firmware and bootup diagnostics section. ===
=== Next deducing cogent software ===
8086:284b is a High Definition Audio card, possibly hosting a soft modem.
Bootup diagnostics lack ALSA data.
and a NEW HDA softmodem controller.
The HDA modem codec file is: /proc/asound/card0/codec#1
-----------------------------------
Codec: Generic 14f1 ID 2bfa
Address: 1
Vendor Id: 0x14f12bfa
Subsystem Id: 0x17aa201b
Revision Id: 0x90000
The audio card hosts a softmodem chip with Vendor ID: 0x14f12bfa
14f1 is the Conexant Vendor ID, and 0x14f12bfa a softmodem chipset.
Get a hsfmodem package through http://www.linuxant.com
For candidate modem in PCI bus: 00:1b.0
Class 0403: 8086:284b Audio device: Intel Corporation 82801H
Primary PCI_id NEW_softmodem_8086:284b
Support type needed or chipset: hsfmodem
Writing Intel.txt
For owners of a Dell PCs with Conexant HSF modems, a driver source package with full speed enabled is available, but requires driver compiling. Read Conexant.txt
The hsfmodem package serves a great variety of Conexant chipset modems.
Start at http://www.linuxant.com/drivers/hsf for
eventually download of a hsfmodem-SomeVersion.zip package with
SomeVersion containing your kernel_version 2.6.18.2-34-default in the filename if possible.
These packages have compiled drivers. Otherwise download the generic
hsfmodem-Version.tar.gz package. Its usage will require compiling.
Read Conexant.txt
Writing Conexant.txt
Completed candidate modem analyses.
The base of the UDEV device file system is: /dev/.udev
Versions adequately match for the compiler installed: 4.1.2
and the compiler used in kernel assembly: 4.1.2
Minimal compiling resources appear complete:
make utility - /usr/bin/make
Compiler version 4.1
linuc_headers base folder /lib/modules/2.6.18.2-34-default/build
However some compilations and executable functions may need additional files,
in the FileNames.h (so called kernel "h"eaders) collection installed in /usr/include/ .
For martian_modem, additional required packages are libc6-dev (and for Debian/Ubuntu, linux-libc-dev). The also required headers of package libc6 are commonly installed by default.
If a driver compilation files with message including some lack of some FileName.h (stdio.h for example.
Some additional kernel-header files need installation to /usr/include.
For Debian/Ubuntu related distributions, run the following command to display the needed package list:
$ sudo apt-get -s install linux-kernel-devel
While some of the files may be on the install CD, others may have to be found through http://packages.ubuntu.com
For Ubuntu Feisty, additional packages required were:
libc6-dev linux-libc-dev
available through http://packages.ubuntu.com/ , if not on the install CD.
Such packages may have different names for other Linux distributions.
Try installing just the libc6-dev, then test the compile again.
Checking pppd properties:
-rwxr-xr-x 1 root dialout 295488 25. Nov 2006 /usr/sbin/pppd
In case of an "error 17" "serial loopback" problem, see:
http://phep2.technion.ac.il/linmodems/archive-sixth/msg02637.html
To enable dialout without Root permission do:
$ su - root (not for Ubuntu)
chmod a+x /usr/sbin/pppd
or under Ubuntu related Linuxes
chmod a+x /usr/sbin/pppd
Checking settings of: /etc/ppp/options
noipdefault
noauth
crtscts
lock
modem
asyncmap 0
nodetach
lcp-echo-interval 30
lcp-echo-failure 4
lcp-max-configure 60
lcp-restart 2
idle 600
noipx
file /etc/ppp/filters
In case of a message like:
Warning: Could not modify /etc/ppp/pap-secrets: Permission denied
see http://linmodems.technion.ac.il/bigarch/archive-sixth/msg04656.html
Don't worry about the following, it is for the experts
should trouble shooting be necessary.
==========================================================
Checking for modem support lines:
--------------------------------------
/device/modem symbolic link:
slmodemd created symbolic link /dev/ttySL0:
Within /etc/udev/ files:
/etc/udev/rules.d/50-udev-default.rules:KERNEL=="mwave", NAME="modems/%k", GROUP="uucp"
/etc/udev/rules.d/31-network.rules:SUBSYSTEM=="net", ENV{INTERFACE}=="ppp*|ippp*|isdn*|plip*|lo*|irda*|dummy*|ipsec*|tun*|tap*|bond*|vlan*|modem*|dsl*", GOTO="skip_ifup"
Within /etc/modprobe.conf files:
/etc/modprobe.conf:# Linux ACP modem (Mwave)
/etc/modprobe.d/blacklist:# ALSA PCI sound/modem modules - should be configured via yast
/etc/modprobe.d/blacklist:blacklist snd-atiixp-modem
/etc/modprobe.d/blacklist:blacklist snd-via82xx-modem
Within any ancient /etc/devfs files:
Within ancient kernel 2.4.n /etc/module.conf files:
--------- end modem support lines --------
