OOzy Your modem is likely a Subsystem in 00:1b.0 Audio device: Intel Corporation 82801G (ICH7 Family) High Definition Audio Controller (rev 02) But Update=2005_April_19 is ancient, and does parse High Definition Audio Controllers Browse http://linmodems.technion.ac.il and download the current scanModem.gz . Within a Linux partition gunzip scanModem.gz To make it executable: chmod +x scanModem Run diagnositics with: ./scanModem Only the ouput ModemData.txt should be sent to Discuss@xxxxxxxxxxxxx MarvS On 9/25/07, OOzy Pal <oozypal@xxxxxxxxx> wrote: > Hello, > > I have used scanModem and bellow is my output. I am really not sure what to do: > __________________ > > ------------ -------------- System information ------------------------ > Ubuntu 7.04 > on System with processor: i686 > currently under kernel: 2.6.20-16-generic > The kernel was assembled with compiler: 4.1.2 > with current System compiler GCC=4.1.2 > /usr/bin/gcc -> gcc-4.1 > > Checking for kernel-headers needed for compiling. > > A /dev/modem symbolic link is not set. > Checking for USB modems > None found > --------- lspci scan ---------------- > PCI_bus > 00:00.0 Host bridge: Intel Corporation Mobile 945GM/PM/GMS/940GML and > 945GT Express Memory Controller Hub (rev 03) > 00:02.0 VGA compatible controller: Intel Corporation Mobile > 945GM/GMS/940GML Express Integrated Graphics Controller (rev 03) > 00:02.1 Display controller: Intel Corporation Mobile 945GM/GMS/940GML > Express Integrated Graphics Controller (rev 03) > 00:1b.0 Audio device: Intel Corporation 82801G (ICH7 Family) High > Definition Audio Controller (rev 02) > 00:1c.0 PCI bridge: Intel Corporation 82801G (ICH7 Family) PCI Express > Port 1 (rev 02) > 00:1c.1 PCI bridge: Intel Corporation 82801G (ICH7 Family) PCI Express > Port 2 (rev 02) > 00:1c.2 PCI bridge: Intel Corporation 82801G (ICH7 Family) PCI Express > Port 3 (rev 02) > 00:1d.0 USB Controller: Intel Corporation 82801G (ICH7 Family) USB > UHCI #1 (rev 02) > 00:1d.1 USB Controller: Intel Corporation 82801G (ICH7 Family) USB > UHCI #2 (rev 02) > 00:1d.2 USB Controller: Intel Corporation 82801G (ICH7 Family) USB > UHCI #3 (rev 02) > 00:1d.3 USB Controller: Intel Corporation 82801G (ICH7 Family) USB > UHCI #4 (rev 02) > 00:1d.7 USB Controller: Intel Corporation 82801G (ICH7 Family) USB2 > EHCI Controller (rev 02) > 00:1e.0 PCI bridge: Intel Corporation 82801 Mobile PCI Bridge (rev e2) > 00:1f.0 ISA bridge: Intel Corporation 82801GBM (ICH7-M) LPC Interface > Bridge (rev 02) > 00:1f.2 IDE interface: Intel Corporation 82801GBM/GHM (ICH7 Family) > Serial ATA Storage Controller IDE (rev 02) > 00:1f.3 SMBus: Intel Corporation 82801G (ICH7 Family) SMBus Controller (rev 02) > 05:00.0 Network controller: Intel Corporation PRO/Wireless 3945ABG > Network Connection (rev 02) > 07:06.0 CardBus bridge: Texas Instruments PCIxx12 Cardbus Controller > 07:06.1 FireWire (IEEE 1394): Texas Instruments PCIxx12 OHCI Compliant > IEEE 1394 Host Controller > 07:06.2 Mass storage controller: Texas Instruments 5-in-1 Multimedia > Card Reader (SD/MMC/MS/MS PRO/xD) > 07:06.3 Generic system peripheral [0805]: Texas Instruments PCIxx12 > SDA Standard Compliant SD Host Controller > 07:08.0 Ethernet controller: Intel Corporation PRO/100 VE Network > Connection (rev 02) > ------------------------------------- > > A modem was not detected among the above PCI devices. > This indicates that the modem, if present has a non-standard or ISA bridge. > Please follow the directions in Modem/General.txt for identifying the > modem properties > when booting under Microsoft Windows. Also access any documentation sources > on yourchipset. Guidance can only be provided AFTER > the chipset and/or its drivers have been identified. > > ======= PCI_ID checking completed ====== > Update=2005_April_19 > > Analyzing information for PCMCIA device at PCI Bus 07:06.0 > GREPping for an inserted PCMCIA modem with filter: ommunication > If a PCMCIA modem is currently inserted and the sockets activated by > /etc/init.d/pcmcia start > then the PCMCIA bridge is NOT transparent. > > If the modem is known to have a Lucent digital signal processing chipset, > then PCMCIA.tar.gz variant assembled by Joern Wustenfeld is necessary, > rather than the standard ltmodem-8.31a9.tar.gz at http://ltmodem.heby.de/ > > For information on modem port creation under the UDEV device file system see: > http://linmodems.technion.ac.il/archive-fourth/msg03299.html for > Conexnant modems > http://linmodems.technion.ac.il/archive-fifth/msg01177.html for > Lucent/Agere DSP modems > > The following information blocks just query some ppp support items. > > ==================================================== > grep -rs ppp /etc/modprobe.* > ------------------------------------- > /etc/modprobe.d/aliases:alias net-pf-24 pppoe > ------------------------------------- > Resident PPP support modules are properly uncompressed . > ----active COMM services are ------------ > eth0 Link encap:Ethernet HWaddr 00:A0:D1:4B:BC:23 > inet6 addr: fe80::2a0:d1ff:fe4b:bc23/64 Scope:Link > This COMM mode should be closed before using the modem, or DNS > services may fail. > Be sure to read the section about ppp related modules and aliases in > Modem/General.txt > Be sure to read the Ethernet section of Modem/General.txt > DEVPPP=crw------- 1 root root 108, 0 2007-04-13 13:20 /dev/ppp > A /dev/modem symbolic link is not present > > No devfsd.conf file found, indicated absense of the devfsd daemon package > for device file system (devfs) symbolic link support. > > DEVFSD= > ---- dmesg queries ------- > [ 0.000000] ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled) > [ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] enabled) > [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1]) > [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1]) > [ 0.317070] ACPI: PCI Interrupt Link [LNKF] (IRQs 1 3 4 5 6 7 11 12 > 14 15) *0, disabled. > [ 0.506253] IO window: disabled. > [ 0.506258] MEM window: disabled. > [ 0.506263] PREFETCH window: disabled. > [ 1.170962] audit: initializing netlink socket (disabled) > [ 21.028000] ibm_acpi: ec object not found > [ 21.328000] pcc_acpi: loading... > [ 30.624000] apm: BIOS not found. > debian is not yet providing pre-compiled drivers for WinModems > > > -- > OOzy > Ubuntu-Feisty >
