Milan,
1057:3052 has a Motorola chipset, poorly supported by Motorola itself
However Zello discovered that drivers written to support Smartlink
modems do support the 1057:3052 chipset!!
It sufficed to add 1057:3052 to the list of modem cards recognized by
the Smartlink slamr driver.
There is a ungrab-winmodem driver used in conjunction with slamr,
which must have 1057:3052
similarly added. See messages from Zello:
http://linmodems.technion.ac.il/bigarch/archive-seventh/msg00846.html
http://linmodems.technion.ac.il/bigarch/archive-seventh/msg00848.html
and Alvaro Aguirre about the ungrab-winmodem fix:
http://linmodems.technion.ac.il/bigarch/archive-seventh/msg00990.html
For general guidance on ungrab-winmodem + slamr usage, read the Smartlink.txt
The modem is supported by the Smartlink slamr driver
plus the slmodemd helper utility. Read the
Smartlink.txt and Modem/YourSystem.txt for follow through guidance.
Regards,
Antonio
On 9/24/07, Milan <tenet@xxxxxxxxxx> wrote:
>
>
> Only plain text email is forwarded by the DISCUSS@xxxxxxxxxxxxx List Server.
> Do use the following as the email Subject Line:
> SomeName, YourCountry Fedora release 7 (Moonshine)
> Kernel kernel 2.6.20-2925.9.fc7xen
> This will alert cogent experts, and distinguish cases in the Archives.
> YourCountry will enable Country Code guidance.
> Occassionally responses are blocked by an Internet Provider mail filters.
> So in a day, also check the Archived responses at http://www.linmodems.org .
> Local Linux experts can be found through: http://www.linux.org/groups/index.html
> -------------------------- System information ----------------------------
> CPU=i686, Fedora release 7 (Moonshine)
> Kernel
> Linux version 2.6.20-2925.9.fc7xen (kojibuilder@xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx) (gcc version 4.1.2 20070502 (Red Hat 4.1.2-12)) #1 SMP Tue May 22 08:53:03 EDT 2007
> scanModem update of: 2007_Sept_07
>
>
> There are no blacklisted modem drivers in /etc/modprobe* files
> USB modem not detected by lsusb
>
>
> Several modems are supported by drivers with ALSA, the Advanced Linux Sound Architecture software.
> Copying ALSA diagnostics to Modem/ALSATENET.tgz
> ALSAversion = 1.0.14rc2
>
> Modem or candidate host audio card have firmware information and diagnostics:
>
> PCI slot PCI ID SubsystemID Name
> ---------- --------- --------- --------------
> 00:12.0 1057:3052 1057:3020 Modem: Motorola SM56 Data Fax Modem
>
> Modem interrupt assignment and sharing:
> 15: 55606 Phys-irq-level libata
> --- Bootup diagnostics for card in PCI slot 00:12.0 ----
>
> === Finished modem firmware and bootup diagnostics section. ===
> === Next deducing cogent software ===
>
> For candidate modem in PCI bus: 00:12.0
> Class 0703: 1057:3052 Modem: Motorola SM56 Data Fax Modem
> Primary PCI_id 1057:3052
> Support type needed or chipset: slamr
>
>
>
> 1057:3052 has a Motorola chipset, poorly supported by Motorola itself
> However Zello discovered that drivers written to support Smartlink modems do support the 1057:3052 chipset!!
> It sufficed to add 1057:3052 to the list of modem cards recognized by the Smartlink slamr driver.
> There is a ungrab-winmodem driver used in conjunction with slamr, which must have 1057:3052
> similarly added. See messages from Zello:
> http://linmodems.technion.ac.il/bigarch/archive-seventh/msg00846.html
> http://linmodems.technion.ac.il/bigarch/archive-seventh/msg00848.html
> and Alvaro Aguirre about the ungrab-winmodem fix:
> http://linmodems.technion.ac.il/bigarch/archive-seventh/msg00990.html
> For general guidance on ungrab-winmodem + slamr usage, read the Smartlink.txt
>
> The modem is supported by the Smartlink slamr driver
> plus the slmodemd helper utility. Read the
> Smartlink.txt and Modem/YourSystem.txt for follow through guidance.
>
> Writing Smartlink.txt
> ============ end Smartlink section =====================
>
> Completed candidate modem analyses.
>
> The base of the UDEV device file system is: /dev/.udev
>
> Versions adequately match for the compiler installed: 4.1.2
> and the compiler used in kernel assembly: 4.1.2
>
> linux-headers-2.6.20-2925.9.fc7xen resources needed for compiling are not manifestly ready!
>
> If compiling is necessary packages must be installed, providing:
> kernel-source-2.6.20-2925.9.fc7xen
>
>
> If a driver compilation files with message including some lack of some FileName.h (stdio.h for example.
> Some additional kernel-header files need installation to /usr/include.
> For Debian/Ubuntu related distributions, run the following command to display the needed package list:
> $ sudo apt-get -s install linux-kernel-devel
> While some of the files may be on the install CD, others may have to be found through http://packages.ubuntu.com
>
> For Ubuntu Feisty, additional packages required were:
> libc6-dev linux-libc-dev
> available through http://packages.ubuntu.com/ , if not on the install CD.
> Such packages may have different names for other Linux distributions.
> Try installing just the libc6-dev, then test the compile again.
>
>
> Checking pppd properties:
> -r-xr-xr-x 1 root root 312332 Dec 1 2006 /usr/sbin/pppd
>
> In case of an "error 17" "serial loopback" problem, see:
> http://phep2.technion.ac.il/linmodems/archive-sixth/msg02637.html
>
> To enable dialout without Root permission do:
> $ su - root (not for Ubuntu)
> chmod a+x /usr/sbin/pppd
> or under Ubuntu related Linuxes
> chmod a+x /usr/sbin/pppd
>
> Checking settings of: /etc/ppp/options
> lock
>
> In case of a message like:
> Warning: Could not modify /etc/ppp/pap-secrets: Permission denied
> see http://linmodems.technion.ac.il/bigarch/archive-sixth/msg04656.html
>
> Read Modem/YourSystem.txt concerning other COMM channels: virbr0
> Which can interfere with Browser naviagation.
>
> Don't worry about the following, it is for the experts
> should trouble shooting be necessary.
> ==========================================================
>
> Checking for modem support lines:
> --------------------------------------
> /device/modem symbolic link:
> slmodemd created symbolic link /dev/ttySL0:
> Within /etc/udev/ files:
> /etc/udev/rules.d/50-udev.rules:KERNEL=="modems/mwave*", NAME="%k", GROUP="uucp", MODE="0660"
> Within /etc/modprobe.conf files:
>
> Within any ancient /etc/devfs files:
>
> Within ancient kernel 2.4.n /etc/module.conf files:
>
> --------- end modem support lines --------
>
>
>
>
