Hello,
I need to find the drivers for this modem.
I'll attach the modemdata file generated by scanmodem.
Thanks in advance
Best regards, Sauro
No virus found in this outgoing message.
Checked by AVG Free Edition.
Version: 7.5.488 / Virus Database: 269.13.30/1025 - Release Date: 23/09/2007
13.53
Only plain text email is forwarded by the DISCUSS@xxxxxxxxxxxxx List Server.
Do use the following as the email Subject Line:
SomeName, YourCountry
Welcome to openSUSE 10.2 (i586) - Kernel kernel 2.6.18.2-34-default
This will alert cogent experts, and distinguish cases in the Archives.
YourCountry will enable Country Code guidance.
Occassionally responses are blocked by an Internet Provider mail filters.
So in a day, also check the Archived responses at http://www.linmodems.org .
Local Linux experts can be found through: http://www.linux.org/groups/index.html
-------------------------- System information ----------------------------
CPU=i686,
Welcome to openSUSE 10.2 (i586) - Kernel
Linux version 2.6.18.2-34-default (geeko@buildhost) (gcc version 4.1.2 20061115 (prerelease) (SUSE Linux)) #1 SMP Mon Nov 27 11:46:27 UTC 2006
scanModem update of: 2007_Sept_07
There are no blacklisted modem drivers in /etc/modprobe* files
USB modem not detected by lsusb
Several modems are supported by drivers with ALSA, the Advanced Linux Sound Architecture software.
Copying ALSA diagnostics to Modem/ALSAroot.tgz
ALSAversion = 1.0.14
Modem or candidate host audio card have firmware information and diagnostics:
PCI slot PCI ID SubsystemID Name
---------- --------- --------- --------------
00:1b.0 8086:27d8 1179:ff10 Audio device: Intel Corporation 82801G
Modem interrupt assignment and sharing:
50: 794 0 IO-APIC-level HDA Intel
--- Bootup diagnostics for card in PCI slot 00:1b.0 ----
ACPI: PCI Interrupt 0000:00:1b.0[A] -> GSI 22 (level, low) -> IRQ 50
PCI: Setting latency timer of device 0000:00:1b.0 to 64
=== Finished modem firmware and bootup diagnostics section. ===
=== Next deducing cogent software ===
8086:27d8 is a High Definition Audio card, possibly hosting a soft modem.
---ALSA bootup diagnostics ---
The HDA modem codec file is: /proc/asound/card0/codec#1
-----------------------------------
Codec: Generic 11c1 Si3054
Address: 1
Vendor Id: 0x11c13026
Subsystem Id: 0x11790001
Revision Id: 0x100700
The audio card hosts a softmodem chip with Vendor ID: 0x11c13026
For candidate modem in PCI bus: 00:1b.0
Class 0403: 8086:27d8 Audio device: Intel Corporation 82801G
Primary PCI_id 8086:27d8
Subsystem PCI_id 1179:ff10
Softmodem codec or Vendor from diagnostics: 11c1, an AgereSystems type.
from Archives: 11c1, an AgereSystems type.
Lacking a dsp (digital signal processing) chip, the modem is a software
intensive or "softmodem" type. Its primary controller manages the traffic
with the CPU. But the software needed is specified in the Subsystem.
-----------------------------------------
Support type needed or chipset: slmodemd
An ALSA (Advanced Linux Sound Architecture) modem driver: snd-hda-intel
provides Low Level support enabling contact with the modem hardware.
For all BUT Conexant chip soft modems (using hsfmodem software)
complementary High Level support is through a Smartlink utility: slmodemd
Download from http://linmodems.technion.ac.il/packages/smartlink/
the package SLMODEMD.gcc4.1.tar.gz having a compiled slmodemd. Unpack under Linux with:
$ tar zxf SLMODEMD.gcc4.1.tar.gz
and read instructions therein. But briefly, the modem is setup with command:
slmodemd -c YOUR_COUNTRY --alsa hw:0,6
reporting dynamic creation of ports:
/dev/ttySL0 --> /dev/pts/N , with N some number
Read Smartlink.txt and Modem/YourSystem.txt for follow through guidance.
Already loaded into the kernel is snd-hda-intel and audio drivers it depends on,
displayed by: lsmod | grep snd_hda_intel
Module Size Used by
-------------------------------------
snd_hda_intel 23060 1
snd_hda_codec 164352 1 snd_hda_intel
snd_pcm 86916 3 snd_pcm_oss,snd_hda_intel,snd_hda_codec
snd 61188 11 snd_seq_dummy,snd_pcm_oss,snd_mixer_oss,snd_seq,snd_seq_device,snd_hda_intel,snd_hda_codec,snd_pcm,snd_timer
snd_page_alloc 14472 2 snd_hda_intel,snd_pcm
The diagnostic outputs for this softmodem section have their raw information in
folders and text files under /proc/asound/ which you can browse. The information
is from files:
/proc/asound/pcm
-------------------------------
00-06: Si3054 Modem : Si3054 Modem : playback 1 : capture 1
00-00: ALC861 Analog : ALC861 Analog : playback 1 : capture 2
/proc/asound/modules
-------------------------------
0 snd_hda_intel
11c13026
-------------------------------
-------------------------------
Current support status of HDA cards is:
Vendor IDs Chip maker Support type
---------- ---------- -------------
0x14f12bfa Conexant hsfmodem , not slmodemd compatible
0x14f12c06 Conexant hsfmodem , not slmodemd compatible
0x11c13026 AgereSystems snd-hda-intel, slmodemd supported
0x11c11040 AgereSystems " " support not yet available.
0x11c13055 AgereSystems " " , "
0x163c3055 Smartlink " " , "
0x163c3155 " " " , "
0x10573055 Motorola " " , "
0x10573155 " " " , ""
as of October 2006.
/proc/asound/card0/codec#1
-------------------------------
and from the command:
aplay -l | grep -i modem
card 0: Intel [HDA Intel], device 6: Si3054 Modem [Si3054 Modem]
----------------end Softmodem section --------------
Writing Intel.txt
Writing Smartlink.txt
============ end Smartlink section =====================
Completed candidate modem analyses.
The base of the UDEV device file system is: /dev/.udev
Versions adequately match for the compiler installed: 4.1.2
and the compiler used in kernel assembly: 4.1.2
Minimal compiling resources appear complete:
make utility - /usr/bin/make
Compiler version 4.1
linuc_headers base folder /lib/modules/2.6.18.2-34-default/build
However some compilations and executable functions may need additional files,
in the FileNames.h (so called kernel "h"eaders) collection installed in /usr/include/ .
For martian_modem, additional required packages are libc6-dev (and for Debian/Ubuntu, linux-libc-dev). The also required headers of package libc6 are commonly installed by default.
If a driver compilation files with message including some lack of some FileName.h (stdio.h for example.
Some additional kernel-header files need installation to /usr/include.
For Debian/Ubuntu related distributions, run the following command to display the needed package list:
$ sudo apt-get -s install linux-kernel-devel
While some of the files may be on the install CD, others may have to be found through http://packages.ubuntu.com
For Ubuntu Feisty, additional packages required were:
libc6-dev linux-libc-dev
available through http://packages.ubuntu.com/ , if not on the install CD.
Such packages may have different names for other Linux distributions.
Try installing just the libc6-dev, then test the compile again.
Checking pppd properties:
-rwxr-xr-x 1 root dialout 295488 25 nov 2006 /usr/sbin/pppd
In case of an "error 17" "serial loopback" problem, see:
http://phep2.technion.ac.il/linmodems/archive-sixth/msg02637.html
To enable dialout without Root permission do:
$ su - root (not for Ubuntu)
chmod a+x /usr/sbin/pppd
or under Ubuntu related Linuxes
chmod a+x /usr/sbin/pppd
Checking settings of: /etc/ppp/options
noipdefault
noauth
crtscts
lock
modem
asyncmap 0
nodetach
lcp-echo-interval 30
lcp-echo-failure 4
lcp-max-configure 60
lcp-restart 2
idle 600
noipx
file /etc/ppp/filters
In case of a message like:
Warning: Could not modify /etc/ppp/pap-secrets: Permission denied
see http://linmodems.technion.ac.il/bigarch/archive-sixth/msg04656.html
Read Modem/YourSystem.txt concerning other COMM channels: eth0
Which can interfere with Browser naviagation.
Don't worry about the following, it is for the experts
should trouble shooting be necessary.
==========================================================
Checking for modem support lines:
--------------------------------------
/device/modem symbolic link:
slmodemd created symbolic link /dev/ttySL0:
Within /etc/udev/ files:
/etc/udev/rules.d/50-udev-default.rules:KERNEL=="mwave", NAME="modems/%k", GROUP="uucp"
/etc/udev/rules.d/31-network.rules:SUBSYSTEM=="net", ENV{INTERFACE}=="ppp*|ippp*|isdn*|plip*|lo*|irda*|dummy*|ipsec*|tun*|tap*|bond*|vlan*|modem*|dsl*", GOTO="skip_ifup"
Within /etc/modprobe.conf files:
/etc/modprobe.conf:# Linux ACP modem (Mwave)
/etc/modprobe.d/blacklist:# ALSA PCI sound/modem modules - should be configured via yast
/etc/modprobe.d/blacklist:blacklist snd-atiixp-modem
/etc/modprobe.d/blacklist:blacklist snd-via82xx-modem
Within any ancient /etc/devfs files:
Within ancient kernel 2.4.n /etc/module.conf files:
--------- end modem support lines --------
