I am new to Linux and setting up my spare laptop on
Ubuntu 7.04 and need a modem driver.
Attached are files generated by scanModem.
Please point me in right direction.
Thx,
KenGMan
____________________________________________________________________________________
Building a website is a piece of cake. Yahoo! Small Business gives you all the tools to get online.
http://smallbusiness.yahoo.com/webhosting CPU0
0: 603934 XT-PIC-XT timer
1: 734 XT-PIC-XT i8042
2: 0 XT-PIC-XT cascade
5: 17566 XT-PIC-XT Intel 82801DB-ICH4, eth1
7: 3 XT-PIC-XT parport0
8: 4 XT-PIC-XT rtc
9: 10 XT-PIC-XT acpi
11: 142627 XT-PIC-XT uhci_hcd:usb1, uhci_hcd:usb2, uhci_hcd:usb3, ehci_hcd:usb4, yenta, yenta, radeon@pci:0000:01:00.0, eth0
12: 140448 XT-PIC-XT i8042
14: 30865 XT-PIC-XT libata
15: 26222 XT-PIC-XT libata
NMI: 0
LOC: 0
ERR: 0
MIS: 0
[ 0.000000] Linux version 2.6.20-15-generic (root@palmer) (gcc version 4.1.2 (Ubuntu 4.1.2-0ubuntu4)) #2 SMP Sun Apr 15 07:36:31 UTC 2007 (Ubuntu 2.6.20-15.27-generic)
[ 0.000000] BIOS-provided physical RAM map:
[ 0.000000] sanitize start
[ 0.000000] sanitize end
[ 0.000000] copy_e820_map() start: 0000000000000000 size: 000000000009f000 end: 000000000009f000 type: 1
[ 0.000000] copy_e820_map() type is E820_RAM
[ 0.000000] copy_e820_map() start: 000000000009f000 size: 0000000000001000 end: 00000000000a0000 type: 2
[ 0.000000] copy_e820_map() start: 0000000000100000 size: 000000001feae000 end: 000000001ffae000 type: 1
[ 0.000000] copy_e820_map() type is E820_RAM
[ 0.000000] copy_e820_map() start: 000000001ffae000 size: 0000000000052000 end: 0000000020000000 type: 2
[ 0.000000] copy_e820_map() start: 00000000feda0000 size: 0000000000060000 end: 00000000fee00000 type: 2
[ 0.000000] copy_e820_map() start: 00000000ffb00000 size: 0000000000500000 end: 0000000100000000 type: 2
[ 0.000000] BIOS-e820: 0000000000000000 - 000000000009f000 (usable)
[ 0.000000] BIOS-e820: 000000000009f000 - 00000000000a0000 (reserved)
[ 0.000000] BIOS-e820: 0000000000100000 - 000000001ffae000 (usable)
[ 0.000000] BIOS-e820: 000000001ffae000 - 0000000020000000 (reserved)
[ 0.000000] BIOS-e820: 00000000feda0000 - 00000000fee00000 (reserved)
[ 0.000000] BIOS-e820: 00000000ffb00000 - 0000000100000000 (reserved)
[ 0.000000] 0MB HIGHMEM available.
[ 0.000000] 511MB LOWMEM available.
[ 0.000000] Entering add_active_range(0, 0, 130990) 0 entries of 256 used
[ 0.000000] Zone PFN ranges:
[ 0.000000] DMA 0 -> 4096
[ 0.000000] Normal 4096 -> 130990
[ 0.000000] HighMem 130990 -> 130990
[ 0.000000] early_node_map[1] active PFN ranges
[ 0.000000] 0: 0 -> 130990
[ 0.000000] On node 0 totalpages: 130990
[ 0.000000] DMA zone: 32 pages used for memmap
[ 0.000000] DMA zone: 0 pages reserved
[ 0.000000] DMA zone: 4064 pages, LIFO batch:0
[ 0.000000] Normal zone: 991 pages used for memmap
[ 0.000000] Normal zone: 125903 pages, LIFO batch:31
[ 0.000000] HighMem zone: 0 pages used for memmap
[ 0.000000] DMI 2.3 present.
[ 0.000000] ACPI: RSDP (v000 DELL ) @ 0x000fdf00
[ 0.000000] ACPI: RSDT (v001 DELL CPi R 0x27d40907 ASL 0x00000061) @ 0x1fff0000
[ 0.000000] ACPI: FADT (v001 DELL CPi R 0x27d40907 ASL 0x00000061) @ 0x1fff0400
[ 0.000000] ACPI: ASF! (v016 DELL CPi R 0x27d40907 ASL 0x00000061) @ 0x1fff0800
[ 0.000000] ACPI: DSDT (v001 INT430 SYSFexxx 0x00001001 MSFT 0x0100000e) @ 0x00000000
[ 0.000000] ACPI: PM-Timer IO Port: 0x808
[ 0.000000] Allocating PCI resources starting at 30000000 (gap: 20000000:deda0000)
[ 0.000000] Detected 1398.867 MHz processor.
[ 7.638278] Built 1 zonelists. Total pages: 129967
[ 7.638283] Kernel command line: root=UUID=35987649-908e-438b-badd-21af2381fce4 ro quiet splash
[ 7.638498] Local APIC disabled by BIOS -- you can enable it with "lapic"
[ 7.638509] mapped APIC to ffffd000 (0140b000)
[ 7.638514] Enabling fast FPU save and restore... done.
[ 7.638517] Enabling unmasked SIMD FPU exception support... done.
[ 7.638530] Initializing CPU#0
[ 7.638604] PID hash table entries: 2048 (order: 11, 8192 bytes)
[ 7.639661] Console: colour VGA+ 80x25
[ 7.639966] Dentry cache hash table entries: 65536 (order: 6, 262144 bytes)
[ 7.640295] Inode-cache hash table entries: 32768 (order: 5, 131072 bytes)
[ 7.657926] Memory: 508224k/523960k available (1992k kernel code, 15204k reserved, 893k data, 328k init, 0k highmem)
[ 7.657940] virtual kernel memory layout:
[ 7.657941] fixmap : 0xfff4e000 - 0xfffff000 ( 708 kB)
[ 7.657943] pkmap : 0xff800000 - 0xffc00000 (4096 kB)
[ 7.657944] vmalloc : 0xe0800000 - 0xff7fe000 ( 495 MB)
[ 7.657946] lowmem : 0xc0000000 - 0xdffae000 ( 511 MB)
[ 7.657948] .init : 0xc03d7000 - 0xc0429000 ( 328 kB)
[ 7.657949] .data : 0xc02f2264 - 0xc03d16d4 ( 893 kB)
[ 7.657951] .text : 0xc0100000 - 0xc02f2264 (1992 kB)
[ 7.657956] Checking if this processor honours the WP bit even in supervisor mode... Ok.
[ 7.734608] Calibrating delay using timer specific routine.. 2799.69 BogoMIPS (lpj=5599393)
[ 7.734661] Security Framework v1.0.0 initialized
[ 7.734670] SELinux: Disabled at boot.
[ 7.734692] Mount-cache hash table entries: 512
[ 7.734859] CPU: After generic identify, caps: a7e9f9bf 00000000 00000000 00000000 00000180 00000000 00000000
[ 7.734873] CPU: L1 I cache: 32K, L1 D cache: 32K
[ 7.734877] CPU: L2 cache: 1024K
[ 7.734880] CPU: After all inits, caps: a7e9f9bf 00000000 00000000 00002040 00000180 00000000 00000000
[ 7.734891] Compat vDSO mapped to ffffe000.
[ 7.734896] Remapping vsyscall page to ffffe000
[ 7.734909] Checking 'hlt' instruction... OK.
[ 7.750708] SMP alternatives: switching to UP code
[ 7.750889] Freeing SMP alternatives: 11k freed
[ 7.751100] Early unpacking initramfs... done
[ 8.169221] ACPI: Core revision 20060707
[ 8.176044] ACPI: Looking for DSDT in initramfs... file /DSDT.aml not found, using machine DSDT.
[ 8.177710] ACPI: setting ELCR to 0200 (from 0800)
[ 8.179907] CPU0: Intel(R) Pentium(R) M processor 1400MHz stepping 05
[ 8.179914] SMP motherboard not detected.
[ 8.179917] Local APIC not detected. Using dummy APIC emulation.
[ 8.179959] Brought up 1 CPUs
[ 8.180251] Booting paravirtualized kernel on bare hardware
[ 8.180319] Time: 22:58:16 Date: 07/31/107
[ 8.180355] NET: Registered protocol family 16
[ 8.180458] EISA bus registered
[ 8.180464] ACPI: bus type pci registered
[ 8.214050] PCI: PCI BIOS revision 2.10 entry at 0xfc96e, last bus=2
[ 8.214053] PCI: Using configuration type 1
[ 8.214055] Setting up standard PCI resources
[ 8.226180] ACPI: Interpreter enabled
[ 8.226183] ACPI: Using PIC for interrupt routing
[ 8.227769] ACPI: PCI Root Bridge [PCI0] (0000:00)
[ 8.227780] PCI: Probing PCI hardware (bus 00)
[ 8.227921] ACPI: Assume root bridge [\_SB_.PCI0] bus is 0
[ 8.234096] PCI quirk: region 0800-087f claimed by ICH4 ACPI/GPIO/TCO
[ 8.234101] PCI quirk: region 0880-08bf claimed by ICH4 GPIO
[ 8.234309] Boot video device is 0000:01:00.0
[ 8.234562] PCI: Transparent bridge - 0000:00:1e.0
[ 8.234647] PCI: Bus #03 (-#06) is hidden behind transparent bridge #02 (-#02) (try 'pci=assign-busses')
[ 8.234651] Please report the result to linux-kernel to fix this permanently
[ 8.234690] PCI: Bus #07 (-#0a) is hidden behind transparent bridge #02 (-#02) (try 'pci=assign-busses')
[ 8.234693] Please report the result to linux-kernel to fix this permanently
[ 8.234712] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
[ 8.262538] ACPI: PCI Interrupt Link [LNKA] (IRQs 9 10 *11)
[ 8.262834] ACPI: PCI Interrupt Link [LNKB] (IRQs 5 7) *11
[ 8.263121] ACPI: PCI Interrupt Link [LNKC] (IRQs 9 10 *11)
[ 8.263407] ACPI: PCI Interrupt Link [LNKD] (IRQs 5 7 9 10 *11)
[ 8.263676] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 9 10 11 12 14 15) *0, disabled.
[ 8.263964] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 7 9 10 *11 12 14 15)
[ 8.265233] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.AGP_._PRT]
[ 8.266083] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCIE._PRT]
[ 8.267052] Linux Plug and Play Support v0.97 (c) Adam Belay
[ 8.267063] pnp: PnP ACPI init
[ 8.309637] pnp: PnP ACPI: found 14 devices
[ 8.309643] PnPBIOS: Disabled by ACPI PNP
[ 8.309697] PCI: Using ACPI for IRQ routing
[ 8.309700] PCI: If a device doesn't work, try "pci=routeirq". If it helps, post a report
[ 8.316126] NET: Registered protocol family 8
[ 8.316129] NET: Registered protocol family 20
[ 8.322016] pnp: 00:02: ioport range 0x4d0-0x4d1 has been reserved
[ 8.322021] pnp: 00:02: ioport range 0x800-0x805 could not be reserved
[ 8.322024] pnp: 00:02: ioport range 0x808-0x80f could not be reserved
[ 8.322031] pnp: 00:03: ioport range 0xf400-0xf4fe has been reserved
[ 8.322035] pnp: 00:03: ioport range 0x806-0x807 has been reserved
[ 8.322039] pnp: 00:03: ioport range 0x810-0x85f could not be reserved
[ 8.322042] pnp: 00:03: ioport range 0x860-0x87f has been reserved
[ 8.322046] pnp: 00:03: ioport range 0x880-0x8bf has been reserved
[ 8.322050] pnp: 00:03: ioport range 0x8c0-0x8df has been reserved
[ 8.322058] pnp: 00:08: ioport range 0x900-0x97f has been reserved
[ 8.322363] PCI: Bridge: 0000:00:01.0
[ 8.322367] IO window: c000-cfff
[ 8.322372] MEM window: fc000000-fdffffff
[ 8.322376] PREFETCH window: e8000000-efffffff
[ 8.322391] PCI: Bus 3, cardbus bridge: 0000:02:01.0
[ 8.322394] IO window: 0000d000-0000d0ff
[ 8.322398] IO window: 0000d400-0000d4ff
[ 8.322403] PREFETCH window: 30000000-33ffffff
[ 8.322408] MEM window: 3c000000-3fffffff
[ 8.322412] PCI: Bus 7, cardbus bridge: 0000:02:01.1
[ 8.322415] IO window: 0000d800-0000d8ff
[ 8.322419] IO window: 0000dc00-0000dcff
[ 8.322424] PREFETCH window: 34000000-37ffffff
[ 8.322429] MEM window: 40000000-43ffffff
[ 8.322433] PCI: Bridge: 0000:00:1e.0
[ 8.322436] IO window: d000-efff
[ 8.322442] MEM window: f6000000-fbffffff
[ 8.322447] PREFETCH window: 30000000-37ffffff
[ 8.322463] PCI: Setting latency timer of device 0000:00:1e.0 to 64
[ 8.322477] PCI: Enabling device 0000:02:01.0 (0000 -> 0003)
[ 8.322696] ACPI: PCI Interrupt Link [LNKD] enabled at IRQ 11
[ 8.322699] PCI: setting IRQ 11 as level-triggered
[ 8.322704] ACPI: PCI Interrupt 0000:02:01.0[A] -> Link [LNKD] -> GSI 11 (level, low) -> IRQ 11
[ 8.322721] PCI: Enabling device 0000:02:01.1 (0000 -> 0003)
[ 8.322726] ACPI: PCI Interrupt 0000:02:01.1[A] -> Link [LNKD] -> GSI 11 (level, low) -> IRQ 11
[ 8.322763] NET: Registered protocol family 2
[ 8.358682] IP route cache hash table entries: 4096 (order: 2, 16384 bytes)
[ 8.358779] TCP established hash table entries: 16384 (order: 5, 131072 bytes)
[ 8.358927] TCP bind hash table entries: 8192 (order: 4, 65536 bytes)
[ 8.359000] TCP: Hash tables configured (established 16384 bind 8192)
[ 8.359004] TCP reno registered
[ 8.370747] checking if image is initramfs... it is
[ 9.195497] Freeing initrd memory: 7008k freed
[ 9.195969] audit: initializing netlink socket (disabled)
[ 9.195988] audit(1188601097.740:1): initialized
[ 9.196158] VFS: Disk quotas dquot_6.5.1
[ 9.196184] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
[ 9.196249] io scheduler noop registered
[ 9.196253] io scheduler anticipatory registered
[ 9.196256] io scheduler deadline registered
[ 9.196272] io scheduler cfq registered (default)
[ 9.196632] isapnp: Scanning for PnP cards...
[ 9.550077] isapnp: No Plug & Play device found
[ 9.587069] Real Time Clock Driver v1.12ac
[ 9.587135] Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing enabled
[ 9.587270] serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
[ 9.588155] 00:0b: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
[ 9.588686] ACPI: PCI Interrupt Link [LNKB] enabled at IRQ 5
[ 9.588690] PCI: setting IRQ 5 as level-triggered
[ 9.588695] ACPI: PCI Interrupt 0000:00:1f.6[B] -> Link [LNKB] -> GSI 5 (level, low) -> IRQ 5
[ 9.588706] ACPI: PCI interrupt for device 0000:00:1f.6 disabled
[ 9.588806] mice: PS/2 mouse device common for all mice
[ 9.589464] RAMDISK driver initialized: 16 RAM disks of 65536K size 1024 blocksize
[ 9.589760] input: Macintosh mouse button emulation as /class/input/input0
[ 9.589801] Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2
[ 9.589805] ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
[ 9.590007] PNP: PS/2 Controller [PNP0303:KBC,PNP0f13:PS2M] at 0x60,0x64 irq 1,12
[ 9.595896] serio: i8042 KBD port at 0x60,0x64 irq 1
[ 9.595903] serio: i8042 AUX port at 0x60,0x64 irq 12
[ 9.596108] EISA: Probing bus 0 at eisa.0
[ 9.596139] EISA: Detected 0 cards.
[ 9.626256] TCP cubic registered
[ 9.626268] NET: Registered protocol family 1
[ 9.626294] Using IPI No-Shortcut mode
[ 9.626366] ACPI: (supports S0 S1 S3 S4 S5)
[ 9.626418] Magic number: 3:121:1009
[ 9.626586] Time: tsc clocksource has been installed.
[ 9.626887] Freeing unused kernel memory: 328k freed
[ 9.628482] input: AT Translated Set 2 keyboard as /class/input/input1
[ 10.863363] Capability LSM initialized
[ 10.903224] ACPI: CPU0 (power states: C1[C1] C2[C2] C3[C3] C4[C3])
[ 10.903233] ACPI: Processor [CPU0] (supports 8 throttling states)
[ 10.907385] ACPI: Thermal Zone [THM] (45 C)
[ 11.308232] usbcore: registered new interface driver usbfs
[ 11.308260] usbcore: registered new interface driver hub
[ 11.308284] usbcore: registered new device driver usb
[ 11.310056] USB Universal Host Controller Interface driver v3.0
[ 11.310403] ACPI: PCI Interrupt Link [LNKA] enabled at IRQ 11
[ 11.310407] ACPI: PCI Interrupt 0000:00:1d.0[A] -> Link [LNKA] -> GSI 11 (level, low) -> IRQ 11
[ 11.310423] PCI: Setting latency timer of device 0000:00:1d.0 to 64
[ 11.310427] uhci_hcd 0000:00:1d.0: UHCI Host Controller
[ 11.310643] uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 1
[ 11.310670] uhci_hcd 0000:00:1d.0: irq 11, io base 0x0000bf80
[ 11.310790] usb usb1: configuration #1 chosen from 1 choice
[ 11.310817] hub 1-0:1.0: USB hub found
[ 11.310823] hub 1-0:1.0: 2 ports detected
[ 11.385944] SCSI subsystem initialized
[ 11.398381] libata version 2.20 loaded.
[ 11.414750] ACPI: PCI Interrupt 0000:00:1d.1[B] -> Link [LNKD] -> GSI 11 (level, low) -> IRQ 11
[ 11.414768] PCI: Setting latency timer of device 0000:00:1d.1 to 64
[ 11.414774] uhci_hcd 0000:00:1d.1: UHCI Host Controller
[ 11.414799] uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 2
[ 11.414825] uhci_hcd 0000:00:1d.1: irq 11, io base 0x0000bf40
[ 11.414933] usb usb2: configuration #1 chosen from 1 choice
[ 11.414963] hub 2-0:1.0: USB hub found
[ 11.414970] hub 2-0:1.0: 2 ports detected
[ 11.519027] ACPI: PCI Interrupt Link [LNKC] enabled at IRQ 11
[ 11.519033] ACPI: PCI Interrupt 0000:00:1d.2[C] -> Link [LNKC] -> GSI 11 (level, low) -> IRQ 11
[ 11.519048] PCI: Setting latency timer of device 0000:00:1d.2 to 64
[ 11.519053] uhci_hcd 0000:00:1d.2: UHCI Host Controller
[ 11.519082] uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 3
[ 11.519109] uhci_hcd 0000:00:1d.2: irq 11, io base 0x0000bf20
[ 11.519223] usb usb3: configuration #1 chosen from 1 choice
[ 11.519255] hub 3-0:1.0: USB hub found
[ 11.519261] hub 3-0:1.0: 2 ports detected
[ 11.623294] ACPI: PCI Interrupt Link [LNKH] enabled at IRQ 11
[ 11.623300] ACPI: PCI Interrupt 0000:00:1d.7[D] -> Link [LNKH] -> GSI 11 (level, low) -> IRQ 11
[ 11.623316] PCI: Setting latency timer of device 0000:00:1d.7 to 64
[ 11.623320] ehci_hcd 0000:00:1d.7: EHCI Host Controller
[ 11.623356] ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 4
[ 11.623396] ehci_hcd 0000:00:1d.7: debug port 1
[ 11.623403] PCI: cache line size of 32 is not supported by device 0000:00:1d.7
[ 11.623414] ehci_hcd 0000:00:1d.7: irq 11, io mem 0xf4fffc00
[ 11.627310] ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004
[ 11.627436] usb usb4: configuration #1 chosen from 1 choice
[ 11.627467] hub 4-0:1.0: USB hub found
[ 11.627476] hub 4-0:1.0: 6 ports detected
[ 4.080000] Time: acpi_pm clocksource has been installed.
[ 4.092000] ata_piix 0000:00:1f.1: version 2.10ac1
[ 4.092000] PCI: Enabling device 0000:00:1f.1 (0005 -> 0007)
[ 4.092000] ACPI: PCI Interrupt 0000:00:1f.1[A] -> Link [LNKA] -> GSI 11 (level, low) -> IRQ 11
[ 4.092000] PCI: Setting latency timer of device 0000:00:1f.1 to 64
[ 4.092000] ata1: PATA max UDMA/100 cmd 0x000101f0 ctl 0x000103f6 bmdma 0x0001bfa0 irq 14
[ 4.092000] ata2: PATA max UDMA/100 cmd 0x00010170 ctl 0x00010376 bmdma 0x0001bfa8 irq 15
[ 4.092000] scsi0 : ata_piix
[ 4.256000] ata1.00: ata_hpa_resize 1: sectors = 58605120, hpa_sectors = 58605120
[ 4.256000] ata1.00: ATA-6: FUJITSU MHT2030AT, 009B, max UDMA/100
[ 4.256000] ata1.00: 58605120 sectors, multi 8: LBA
[ 4.264000] ata1.00: ata_hpa_resize 1: sectors = 58605120, hpa_sectors = 58605120
[ 4.264000] ata1.00: configured for UDMA/100
[ 4.264000] scsi1 : ata_piix
[ 4.584000] ata2.00: ATAPI, max UDMA/33
[ 4.748000] ata2.00: configured for UDMA/33
[ 4.748000] scsi 0:0:0:0: Direct-Access ATA FUJITSU MHT2030A 009B PQ: 0 ANSI: 5
[ 4.748000] scsi 1:0:0:0: CD-ROM SONY DVD+RW DW-R56A QDS1 PQ: 0 ANSI: 5
[ 4.752000] tg3.c:v3.72 (January 8, 2007)
[ 4.752000] ACPI: PCI Interrupt 0000:02:00.0[A] -> Link [LNKC] -> GSI 11 (level, low) -> IRQ 11
[ 4.800000] eth0: Tigon3 [partno(BCM95705A50) rev 3001 PHY(5705)] (PCI:33MHz:32-bit) 10/100/1000Base-T Ethernet 00:11:43:3b:5e:6b
[ 4.800000] eth0: RXcsums[1] LinkChgREG[1] MIirq[1] ASF[0] Split[0] WireSpeed[1] TSOcap[1]
[ 4.800000] eth0: dma_rwctrl[763f0000] dma_mask[64-bit]
[ 4.804000] SCSI device sda: 58605120 512-byte hdwr sectors (30006 MB)
[ 4.804000] sda: Write Protect is off
[ 4.804000] sda: Mode Sense: 00 3a 00 00
[ 4.804000] SCSI device sda: write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 4.804000] SCSI device sda: 58605120 512-byte hdwr sectors (30006 MB)
[ 4.804000] sda: Write Protect is off
[ 4.804000] sda: Mode Sense: 00 3a 00 00
[ 4.804000] SCSI device sda: write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 4.804000] sda: sda1 sda2 < sda5 > sda3
[ 4.924000] sd 0:0:0:0: Attached scsi disk sda
[ 4.932000] sd 0:0:0:0: Attached scsi generic sg0 type 0
[ 4.932000] scsi 1:0:0:0: Attached scsi generic sg1 type 5
[ 4.936000] sr0: scsi3-mmc drive: 24x/24x writer cd/rw xa/form2 cdda tray
[ 4.936000] Uniform CD-ROM driver Revision: 3.20
[ 4.936000] sr 1:0:0:0: Attached scsi CD-ROM sr0
[ 5.224000] Attempting manual resume
[ 5.224000] swsusp: Resume From Partition 8:3
[ 5.224000] PM: Checking swsusp image.
[ 5.256000] PM: Resume from disk failed.
[ 5.308000] kjournald starting. Commit interval 5 seconds
[ 5.308000] EXT3-fs: mounted filesystem with ordered data mode.
[ 17.932000] PM: Writing back config space on device 0000:02:00.0 at offset b (was 165d14e4, writing 865d1028)
[ 17.932000] PM: Writing back config space on device 0000:02:00.0 at offset 3 (was 0, writing 2008)
[ 17.932000] PM: Writing back config space on device 0000:02:00.0 at offset 2 (was 2000000, writing 2000001)
[ 17.932000] PM: Writing back config space on device 0000:02:00.0 at offset 1 (was 2b00000, writing 2b00106)
[ 19.532000] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[ 19.536000] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
[ 19.896000] NET: Registered protocol family 17
[ 19.912000] iTCO_vendor_support: vendor-support=0
[ 19.916000] iTCO_wdt: Intel TCO WatchDog Timer Driver v1.01 (11-Nov-2006)
[ 19.916000] iTCO_wdt: Found a ICH4-M TCO device (Version=1, TCOBASE=0x0860)
[ 19.916000] iTCO_wdt: initialized. heartbeat=30 sec (nowayout=0)
[ 19.940000] intel_rng: FWH not detected
[ 20.464000] Yenta: CardBus bridge found at 0000:02:01.0 [1028:011d]
[ 20.464000] Yenta O2: res at 0x94/0xD4: 00/ea
[ 20.464000] Yenta O2: enabling read prefetch/write burst
[ 20.592000] Yenta: ISA IRQ mask 0x0498, PCI irq 11
[ 20.592000] Socket status: 30000006
[ 20.592000] Yenta: Raising subordinate bus# of parent bus (#02) from #02 to #06
[ 20.592000] pcmcia: parent PCI bridge I/O window: 0xd000 - 0xefff
[ 20.592000] cs: IO port probe 0xd000-0xefff: clean.
[ 20.592000] pcmcia: parent PCI bridge Memory window: 0xf6000000 - 0xfbffffff
[ 20.592000] pcmcia: parent PCI bridge Memory window: 0x30000000 - 0x37ffffff
[ 20.592000] Yenta: CardBus bridge found at 0000:02:01.1 [1028:011d]
[ 20.720000] Yenta: ISA IRQ mask 0x0498, PCI irq 11
[ 20.720000] Socket status: 30000410
[ 20.720000] Yenta: Raising subordinate bus# of parent bus (#02) from #06 to #0a
[ 20.720000] pcmcia: parent PCI bridge I/O window: 0xd000 - 0xefff
[ 20.720000] cs: IO port probe 0xd000-0xefff: clean.
[ 20.720000] pcmcia: parent PCI bridge Memory window: 0xf6000000 - 0xfbffffff
[ 20.720000] pcmcia: parent PCI bridge Memory window: 0x30000000 - 0x37ffffff
[ 20.996000] Linux agpgart interface v0.102 (c) Dave Jones
[ 20.996000] agpgart: Detected an Intel 855PM Chipset.
[ 21.004000] agpgart: AGP aperture is 128M @ 0xe0000000
[ 21.024000] ieee80211_crypt: registered algorithm 'NULL'
[ 21.040000] ieee80211: 802.11 data/management/control stack, git-1.1.13
[ 21.040000] ieee80211: Copyright (C) 2004-2005 Intel Corporation <jketreno@xxxxxxxxxxxxxxx>
[ 21.104000] input: PC Speaker as /class/input/input2
[ 21.212000] ipw2100: Intel(R) PRO/Wireless 2100 Network Driver, git-1.2.2
[ 21.212000] ipw2100: Copyright(c) 2003-2006 Intel Corporation
[ 21.224000] ACPI: PCI Interrupt 0000:02:03.0[A] -> Link [LNKB] -> GSI 5 (level, low) -> IRQ 5
[ 21.228000] ipw2100: Detected Intel PRO/Wireless 2100 Network Connection
[ 21.356000] pccard: PCMCIA card inserted into slot 1
[ 21.460000] parport: PnPBIOS parport detected.
[ 21.460000] parport0: PC-style at 0x378 (0x778), irq 7, dma 1 [PCSPP,TRISTATE,COMPAT,ECP,DMA]
[ 21.504000] irda_init()
[ 21.504000] NET: Registered protocol family 23
[ 21.580000] input: DualPoint Stick as /class/input/input3
[ 21.604000] input: AlpsPS/2 ALPS DualPoint TouchPad as /class/input/input4
[ 21.848000] ACPI: PCI Interrupt 0000:00:1f.5[B] -> Link [LNKB] -> GSI 5 (level, low) -> IRQ 5
[ 21.848000] PCI: Setting latency timer of device 0000:00:1f.5 to 64
[ 22.072000] cs: memory probe 0xf6000000-0xfbffffff: excluding 0xf6000000-0xf65fffff 0xf6c00000-0xf71fffff 0xf7e00000-0xf83fffff 0xf9c00000-0xfa1fffff 0xfae00000-0xfb3fffff
[ 22.084000] pcmcia: registering new device pcmcia1.0
[ 22.144000] cs: IO port probe 0x100-0x3af: excluding 0x270-0x277
[ 22.144000] cs: IO port probe 0x3e0-0x4ff: clean.
[ 22.144000] cs: IO port probe 0x820-0x8ff: clean.
[ 22.144000] cs: IO port probe 0xc00-0xcf7: clean.
[ 22.144000] cs: IO port probe 0xa00-0xaff: clean.
[ 22.148000] cs: IO port probe 0x100-0x3af: excluding 0x270-0x277
[ 22.148000] cs: IO port probe 0x3e0-0x4ff: clean.
[ 22.148000] cs: IO port probe 0x820-0x8ff: clean.
[ 22.148000] cs: IO port probe 0xc00-0xcf7: clean.
[ 22.148000] cs: IO port probe 0xa00-0xaff: clean.
[ 22.668000] intel8x0_measure_ac97_clock: measured 55446 usecs
[ 22.668000] intel8x0: clocking to 48000
[ 22.956000] fuse init (API version 7.8)
[ 22.992000] lp0: using parport0 (interrupt-driven).
[ 23.020000] Adding 2104504k swap on /dev/disk/by-uuid/2ba90642-4542-4706-844f-496c5f6c3b56. Priority:-1 extents:1 across:2104504k
[ 23.212000] EXT3 FS on sda1, internal journal
[ 23.488000] kjournald starting. Commit interval 5 seconds
[ 23.488000] EXT3 FS on sda5, internal journal
[ 23.488000] EXT3-fs: mounted filesystem with ordered data mode.
[ 27.844000] ibm_acpi: ec object not found
[ 27.952000] ACPI: ACPI Dock Station Driver
[ 28.248000] ACPI: Battery Slot [BAT0] (battery present)
[ 28.248000] ACPI: Battery Slot [BAT1] (battery absent)
[ 28.488000] ACPI: Video Device [VID] (multi-head: yes rom: no post: no)
[ 28.556000] input: Lid Switch as /class/input/input5
[ 28.560000] ACPI: Lid Switch [LID]
[ 28.604000] input: Power Button (CM) as /class/input/input6
[ 28.608000] ACPI: Power Button (CM) [PBTN]
[ 28.656000] input: Sleep Button (CM) as /class/input/input7
[ 28.660000] ACPI: Sleep Button (CM) [SBTN]
[ 28.680000] Using specific hotkey driver
[ 28.716000] ACPI: AC Adapter [AC] (on-line)
[ 28.776000] pcc_acpi: loading...
[ 33.412000] [drm] Initialized drm 1.1.0 20060810
[ 33.436000] ACPI: PCI Interrupt 0000:01:00.0[A] -> Link [LNKA] -> GSI 11 (level, low) -> IRQ 11
[ 33.440000] [drm] Initialized radeon 1.25.0 20060524 on minor 0
[ 34.480000] ppdev: user-space parallel port driver
[ 35.472000] agpgart: Found an AGP 2.0 compliant device at 0000:00:00.0.
[ 35.472000] agpgart: Putting AGP V2 device at 0000:00:00.0 into 1x mode
[ 35.472000] agpgart: Putting AGP V2 device at 0000:01:00.0 into 1x mode
[ 35.476000] apm: BIOS not found.
[ 35.736000] [drm] Setting GART location based on new memory map
[ 35.736000] [drm] Loading R200 Microcode
[ 35.736000] [drm] writeback test succeeded in 2 usecs
[ 35.836000] Bluetooth: Core ver 2.11
[ 35.836000] NET: Registered protocol family 31
[ 35.836000] Bluetooth: HCI device and connection manager initialized
[ 35.836000] Bluetooth: HCI socket layer initialized
[ 35.936000] Bluetooth: L2CAP ver 2.8
[ 35.936000] Bluetooth: L2CAP socket layer initialized
[ 35.972000] Bluetooth: RFCOMM socket layer initialized
[ 35.972000] Bluetooth: RFCOMM TTY layer initialized
[ 35.972000] Bluetooth: RFCOMM ver 1.8
[ 59.512000] NET: Registered protocol family 10
[ 59.512000] lo: Disabled Privacy Extensions
[ 59.512000] ADDRCONF(NETDEV_UP): eth0: link is not ready
[ 59.512000] ADDRCONF(NETDEV_UP): eth1: link is not ready
[ 861.632000] PM: Writing back config space on device 0000:02:00.0 at offset b (was 165d14e4, writing 865d1028)
[ 861.632000] PM: Writing back config space on device 0000:02:00.0 at offset 3 (was 0, writing 2008)
[ 861.632000] PM: Writing back config space on device 0000:02:00.0 at offset 2 (was 2000000, writing 2000001)
[ 861.632000] PM: Writing back config space on device 0000:02:00.0 at offset 1 (was 2b00000, writing 2b00106)
[ 862.044000] ADDRCONF(NETDEV_UP): eth1: link is not ready
[ 862.208000] PM: Writing back config space on device 0000:02:00.0 at offset b (was 165d14e4, writing 865d1028)
[ 862.208000] PM: Writing back config space on device 0000:02:00.0 at offset 3 (was 0, writing 2008)
[ 862.208000] PM: Writing back config space on device 0000:02:00.0 at offset 2 (was 2000000, writing 2000001)
[ 862.208000] PM: Writing back config space on device 0000:02:00.0 at offset 1 (was 2b00000, writing 2b00106)
[ 862.504000] ADDRCONF(NETDEV_UP): eth0: link is not ready
[ 864.968000] PM: Writing back config space on device 0000:02:00.0 at offset b (was 165d14e4, writing 865d1028)
[ 864.968000] PM: Writing back config space on device 0000:02:00.0 at offset 3 (was 0, writing 2008)
[ 864.968000] PM: Writing back config space on device 0000:02:00.0 at offset 2 (was 2000000, writing 2000001)
[ 864.968000] PM: Writing back config space on device 0000:02:00.0 at offset 1 (was 2b00000, writing 2b00106)
[ 865.388000] ADDRCONF(NETDEV_UP): eth1: link is not ready
[ 865.552000] PM: Writing back config space on device 0000:02:00.0 at offset b (was 165d14e4, writing 865d1028)
[ 865.552000] PM: Writing back config space on device 0000:02:00.0 at offset 3 (was 0, writing 2008)
[ 865.552000] PM: Writing back config space on device 0000:02:00.0 at offset 2 (was 2000000, writing 2000001)
[ 865.552000] PM: Writing back config space on device 0000:02:00.0 at offset 1 (was 2b00000, writing 2b00106)
[ 865.848000] ADDRCONF(NETDEV_UP): eth0: link is not ready
[ 1214.544000] PM: Writing back config space on device 0000:02:00.0 at offset b (was 165d14e4, writing 865d1028)
[ 1214.544000] PM: Writing back config space on device 0000:02:00.0 at offset 3 (was 0, writing 2008)
[ 1214.544000] PM: Writing back config space on device 0000:02:00.0 at offset 2 (was 2000000, writing 2000001)
[ 1214.544000] PM: Writing back config space on device 0000:02:00.0 at offset 1 (was 2b00000, writing 2b00106)
[ 1214.956000] ADDRCONF(NETDEV_UP): eth1: link is not ready
[ 1215.120000] PM: Writing back config space on device 0000:02:00.0 at offset b (was 165d14e4, writing 865d1028)
[ 1215.120000] PM: Writing back config space on device 0000:02:00.0 at offset 3 (was 0, writing 2008)
[ 1215.120000] PM: Writing back config space on device 0000:02:00.0 at offset 2 (was 2000000, writing 2000001)
[ 1215.120000] PM: Writing back config space on device 0000:02:00.0 at offset 1 (was 2b00000, writing 2b00106)
[ 1215.416000] ADDRCONF(NETDEV_UP): eth0: link is not ready
[ 1225.476000] PM: Writing back config space on device 0000:02:00.0 at offset b (was 165d14e4, writing 865d1028)
[ 1225.476000] PM: Writing back config space on device 0000:02:00.0 at offset 3 (was 0, writing 2008)
[ 1225.476000] PM: Writing back config space on device 0000:02:00.0 at offset 2 (was 2000000, writing 2000001)
[ 1225.476000] PM: Writing back config space on device 0000:02:00.0 at offset 1 (was 2b00000, writing 2b00106)
[ 1225.876000] ADDRCONF(NETDEV_UP): eth1: link is not ready
[ 1226.040000] PM: Writing back config space on device 0000:02:00.0 at offset b (was 165d14e4, writing 865d1028)
[ 1226.040000] PM: Writing back config space on device 0000:02:00.0 at offset 3 (was 0, writing 2008)
[ 1226.040000] PM: Writing back config space on device 0000:02:00.0 at offset 2 (was 2000000, writing 2000001)
[ 1226.040000] PM: Writing back config space on device 0000:02:00.0 at offset 1 (was 2b00000, writing 2b00106)
[ 1226.336000] ADDRCONF(NETDEV_UP): eth0: link is not ready
[ 1228.160000] PM: Writing back config space on device 0000:02:00.0 at offset b (was 165d14e4, writing 865d1028)
[ 1228.160000] PM: Writing back config space on device 0000:02:00.0 at offset 3 (was 0, writing 2008)
[ 1228.160000] PM: Writing back config space on device 0000:02:00.0 at offset 2 (was 2000000, writing 2000001)
[ 1228.160000] PM: Writing back config space on device 0000:02:00.0 at offset 1 (was 2b00000, writing 2b00106)
[ 1230.616000] ADDRCONF(NETDEV_UP): eth1: link is not ready
[ 1230.780000] PM: Writing back config space on device 0000:02:00.0 at offset b (was 165d14e4, writing 865d1028)
[ 1230.780000] PM: Writing back config space on device 0000:02:00.0 at offset 3 (was 0, writing 2008)
[ 1230.780000] PM: Writing back config space on device 0000:02:00.0 at offset 2 (was 2000000, writing 2000001)
[ 1230.780000] PM: Writing back config space on device 0000:02:00.0 at offset 1 (was 2b00000, writing 2b00106)
[ 1231.080000] ADDRCONF(NETDEV_UP): eth0: link is not ready
[ 1262.168000] ADDRCONF(NETDEV_UP): eth1: link is not ready
[ 1284.764000] ADDRCONF(NETDEV_UP): eth1: link is not ready
[ 1758.564000] PM: Writing back config space on device 0000:02:00.0 at offset b (was 165d14e4, writing 865d1028)
[ 1758.564000] PM: Writing back config space on device 0000:02:00.0 at offset 3 (was 0, writing 2008)
[ 1758.564000] PM: Writing back config space on device 0000:02:00.0 at offset 2 (was 2000000, writing 2000001)
[ 1758.564000] PM: Writing back config space on device 0000:02:00.0 at offset 1 (was 2b00000, writing 2b00106)
[ 1758.856000] pccard: card ejected from slot 1
[ 1759.208000] ACPI: PCI interrupt for device 0000:02:00.0 disabled
[ 1759.704000] ACPI: PCI interrupt for device 0000:02:03.0 disabled
[ 1759.712000] ieee80211_crypt: unregistered algorithm 'NULL'
[ 1761.260000] PM: suspend-to-disk mode set to 'shutdown'
[ 1761.260000] Disabling non-boot CPUs ...
[ 1761.260000] Stopping tasks ... done.
[ 1761.292000] Shrinking memory... -\|/done (40433 pages freed)
[ 1762.936000] Freed 161732 kbytes in 1.68 seconds (96.26 MB/s)
[ 1762.936000] Suspending console(s)
[ 1762.936000] platform bluetooth: freeze
[ 1762.936000] platform dock.0: freeze
[ 1762.936000] ac97 0-0:STAC9750,51: freeze
[ 1762.936000] iTCO_wdt iTCO_wdt: freeze
[ 1762.936000] sr 1:0:0:0: freeze
[ 1762.936000] sd 0:0:0:0: freeze
[ 1763.140000] usbdev4.1_ep81: PM: suspend 0->1, parent 4-0:1.0 already 2
[ 1763.140000] hub 4-0:1.0: PM: suspend 2-->1
[ 1763.140000] hub 4-0:1.0: PM: suspend 2->1, parent usb4 already 2
[ 1763.140000] usbdev4.1_ep00: PM: suspend 0->1, parent usb4 already 2
[ 1763.140000] usb usb4: PM: suspend 2-->1
[ 1763.140000] usbdev3.1_ep81: PM: suspend 0->1, parent 3-0:1.0 already 2
[ 1763.140000] hub 3-0:1.0: PM: suspend 2-->1
[ 1763.140000] hub 3-0:1.0: PM: suspend 2->1, parent usb3 already 2
[ 1763.140000] usbdev3.1_ep00: PM: suspend 0->1, parent usb3 already 2
[ 1763.140000] usb usb3: PM: suspend 2-->1
[ 1763.140000] usbdev2.1_ep81: PM: suspend 0->1, parent 2-0:1.0 already 2
[ 1763.140000] hub 2-0:1.0: PM: suspend 2-->1
[ 1763.140000] hub 2-0:1.0: PM: suspend 2->1, parent usb2 already 2
[ 1763.140000] usbdev2.1_ep00: PM: suspend 0->1, parent usb2 already 2
[ 1763.140000] usb usb2: PM: suspend 2-->1
[ 1763.140000] usbdev1.1_ep81: PM: suspend 0->1, parent 1-0:1.0 already 2
[ 1763.140000] hub 1-0:1.0: PM: suspend 2-->1
[ 1763.140000] hub 1-0:1.0: PM: suspend 2->1, parent usb1 already 2
[ 1763.140000] usbdev1.1_ep00: PM: suspend 0->1, parent usb1 already 2
[ 1763.140000] usb usb1: PM: suspend 2-->1
[ 1763.140000] platform vesafb.0: freeze
[ 1763.140000] platform eisa.0: freeze
[ 1763.140000] i8042 i8042: freeze
[ 1763.668000] serial8250 serial8250: freeze
[ 1763.668000] pcspkr pcspkr: freeze
[ 1763.668000] pnp 00:0d: freeze
[ 1763.668000] parport_pc 00:0c: freeze
[ 1763.672000] pnp: Device 00:0c disabled.
[ 1763.672000] serial 00:0b: freeze
[ 1763.672000] pnp: Device 00:0b disabled.
[ 1763.672000] pnp 00:0a: freeze
[ 1763.672000] pnp 00:09: freeze
[ 1763.672000] system 00:08: freeze
[ 1763.672000] pnp 00:07: freeze
[ 1763.672000] pnp 00:06: freeze
[ 1763.672000] i8042 kbd 00:05: freeze
[ 1763.672000] i8042 aux 00:04: freeze
[ 1763.672000] system 00:03: freeze
[ 1763.672000] system 00:02: freeze
[ 1763.672000] pnp 00:01: freeze
[ 1763.672000] system 00:00: freeze
[ 1763.672000] pci 0000:02:03.0: freeze
[ 1763.672000] yenta_cardbus 0000:02:01.1: freeze
[ 1763.672000] yenta_cardbus 0000:02:01.0: freeze
[ 1763.672000] pci 0000:02:00.0: freeze
[ 1763.672000] pci 0000:01:00.0: freeze
[ 1763.672000] pci 0000:00:1f.6: freeze
[ 1763.672000] Intel ICH 0000:00:1f.5: freeze
[ 1763.672000] ACPI: PCI interrupt for device 0000:00:1f.5 disabled
[ 1763.672000] ata_piix 0000:00:1f.1: freeze
[ 1763.672000] ata1: ACPI get timing mode failed.
[ 1763.672000] ata2: ACPI get timing mode failed.
[ 1763.672000] ACPI: PCI interrupt for device 0000:00:1f.1 disabled
[ 1763.672000] pci 0000:00:1f.0: freeze
[ 1763.672000] pci 0000:00:1e.0: freeze
[ 1763.676000] ehci_hcd 0000:00:1d.7: freeze
[ 1763.676000] ACPI: PCI interrupt for device 0000:00:1d.7 disabled
[ 1763.692000] uhci_hcd 0000:00:1d.2: freeze
[ 1763.692000] ACPI: PCI interrupt for device 0000:00:1d.2 disabled
[ 1763.692000] uhci_hcd 0000:00:1d.1: freeze
[ 1763.692000] ACPI: PCI interrupt for device 0000:00:1d.1 disabled
[ 1763.692000] uhci_hcd 0000:00:1d.0: freeze
[ 1763.692000] ACPI: PCI interrupt for device 0000:00:1d.0 disabled
[ 1763.692000] pci 0000:00:01.0: freeze
[ 1763.692000] agpgart-intel 0000:00:00.0: freeze
[ 1763.692000] acpi acpi: freeze
[ 1763.692000] PM: snapshotting memory.
[ 1763.692000] platform bluetooth: LATE freeze
[ 1763.692000] platform dock.0: LATE freeze
[ 1763.692000] iTCO_wdt iTCO_wdt: LATE freeze
[ 1763.692000] platform vesafb.0: LATE freeze
[ 1763.692000] platform eisa.0: LATE freeze
[ 1763.692000] i8042 i8042: LATE freeze
[ 1763.692000] serial8250 serial8250: LATE freeze
[ 1763.692000] pcspkr pcspkr: LATE freeze
[ 1763.692000] pci 0000:02:03.0: LATE freeze
[ 1763.692000] yenta_cardbus 0000:02:01.1: LATE freeze
[ 1763.692000] yenta_cardbus 0000:02:01.0: LATE freeze
[ 1763.692000] pci 0000:02:00.0: LATE freeze
[ 1763.692000] pci 0000:01:00.0: LATE freeze
[ 1763.692000] pci 0000:00:1f.6: LATE freeze
[ 1763.692000] Intel ICH 0000:00:1f.5: LATE freeze
[ 1763.692000] pci 0000:00:1f.0: LATE freeze
[ 1763.692000] pci 0000:00:1e.0: LATE freeze
[ 1763.692000] pci 0000:00:01.0: LATE freeze
[ 1763.692000] agpgart-intel 0000:00:00.0: LATE freeze
[ 1763.692000] swsusp: critical section:
[ 1763.692000] swsusp: Need to copy 58161 pages
[ 1763.692000] swsusp: Normal pages needed: 58161 + 1024 + 14, available pages: 72827
[139253.692000] agpgart-intel 0000:00:00.0: EARLY resume
[139253.692000] pci 0000:00:01.0: EARLY resume
[139253.692000] uhci_hcd 0000:00:1d.0: EARLY resume
[139253.692000] uhci_hcd 0000:00:1d.1: EARLY resume
[139253.692000] uhci_hcd 0000:00:1d.2: EARLY resume
[139253.692000] ehci_hcd 0000:00:1d.7: EARLY resume
[139253.692000] pci 0000:00:1e.0: EARLY resume
[139253.692000] pci 0000:00:1f.0: EARLY resume
[139253.692000] ata_piix 0000:00:1f.1: EARLY resume
[139253.692000] Intel ICH 0000:00:1f.5: EARLY resume
[139253.692000] pci 0000:00:1f.6: EARLY resume
[139253.692000] pci 0000:01:00.0: EARLY resume
[139253.692000] pci 0000:02:00.0: EARLY resume
[139253.692000] yenta_cardbus 0000:02:01.0: EARLY resume
[139253.692000] yenta_cardbus 0000:02:01.1: EARLY resume
[139253.692000] pci 0000:02:03.0: EARLY resume
[139253.692000] pcspkr pcspkr: EARLY resume
[139253.692000] serial8250 serial8250: EARLY resume
[139253.692000] i8042 i8042: EARLY resume
[139253.692000] platform eisa.0: EARLY resume
[139253.692000] platform vesafb.0: EARLY resume
[139253.692000] iTCO_wdt iTCO_wdt: EARLY resume
[139253.692000] platform dock.0: EARLY resume
[139253.692000] platform bluetooth: EARLY resume
[139253.692000] PM: Image restored successfully.
[139253.712000] acpi acpi: resuming
[139253.712000] agpgart-intel 0000:00:00.0: resuming
[139253.712000] pci 0000:00:01.0: resuming
[139253.712000] uhci_hcd 0000:00:1d.0: resuming
[139253.712000] ACPI: PCI Interrupt 0000:00:1d.0[A] -> Link [LNKA] -> GSI 11 (level, low) -> IRQ 11
[139253.712000] PCI: Setting latency timer of device 0000:00:1d.0 to 64
[139253.712000] usb usb1: root hub lost power or was reset
[139253.712000] uhci_hcd 0000:00:1d.1: resuming
[139253.712000] ACPI: PCI Interrupt 0000:00:1d.1[B] -> Link [LNKD] -> GSI 11 (level, low) -> IRQ 11
[139253.712000] PCI: Setting latency timer of device 0000:00:1d.1 to 64
[139253.712000] usb usb2: root hub lost power or was reset
[139253.712000] uhci_hcd 0000:00:1d.2: resuming
[139253.712000] ACPI: PCI Interrupt 0000:00:1d.2[C] -> Link [LNKC] -> GSI 11 (level, low) -> IRQ 11
[139253.712000] PCI: Setting latency timer of device 0000:00:1d.2 to 64
[139253.712000] usb usb3: root hub lost power or was reset
[139253.712000] ehci_hcd 0000:00:1d.7: resuming
[139253.728000] ACPI: PCI Interrupt 0000:00:1d.7[D] -> Link [LNKH] -> GSI 11 (level, low) -> IRQ 11
[139253.728000] PCI: Setting latency timer of device 0000:00:1d.7 to 64
[139253.728000] usb usb4: root hub lost power or was reset
[139253.728000] ehci_hcd 0000:00:1d.7: debug port 1
[139253.728000] PCI: cache line size of 32 is not supported by device 0000:00:1d.7
[139253.728000] pci 0000:00:1e.0: resuming
[139253.728000] PM: Writing back config space on device 0000:00:1e.0 at offset 6 (was 20020200, writing 200a0200)
[139253.732000] PCI: Setting latency timer of device 0000:00:1e.0 to 64
[139253.732000] pci 0000:00:1f.0: resuming
[139253.732000] ata_piix 0000:00:1f.1: resuming
[139253.732000] PM: Writing back config space on device 0000:00:1f.1 at offset 1 (was 2800003, writing 2800007)
[139253.732000] ACPI: PCI Interrupt 0000:00:1f.1[A] -> Link [LNKA] -> GSI 11 (level, low) -> IRQ 11
[139253.732000] PCI: Setting latency timer of device 0000:00:1f.1 to 64
[139253.732000] ata1: ACPI set timing mode failed.
[139253.732000] ata2: ACPI set timing mode failed.
[139253.732000] Intel ICH 0000:00:1f.5: resuming
[139253.732000] PM: Writing back config space on device 0000:00:1f.5 at offset 1 (was 2900007, writing 2900003)
[139253.732000] ACPI: PCI Interrupt 0000:00:1f.5[B] -> Link [LNKB] -> GSI 5 (level, low) -> IRQ 5
[139253.732000] PCI: Setting latency timer of device 0000:00:1f.5 to 64
[139254.736000] pci 0000:00:1f.6: resuming
[139254.736000] pci 0000:01:00.0: resuming
[139254.736000] ACPI: PCI Interrupt 0000:01:00.0[A] -> Link [LNKA] -> GSI 11 (level, low) -> IRQ 11
[139254.736000] pci 0000:02:00.0: resuming
[139254.736000] PM: Writing back config space on device 0000:02:00.0 at offset 1 (was 2b00106, writing 2b00102)
[139254.736000] yenta_cardbus 0000:02:01.0: resuming
[139254.736000] PM: Writing back config space on device 0000:02:01.0 at offset f (was 14001ff, writing 58001ff)
[139254.736000] PM: Writing back config space on device 0000:02:01.0 at offset 3 (was 822000, writing 82a800)
[139254.736000] PM: Writing back config space on device 0000:02:01.0 at offset 1 (was 4100007, writing 4100087)
[139254.736000] Yenta O2: res at 0x94/0xD4: 00/ea
[139254.736000] Yenta O2: enabling read prefetch/write burst
[139254.736000] yenta_cardbus 0000:02:01.1: resuming
[139254.736000] PM: Writing back config space on device 0000:02:01.1 at offset f (was 14001ff, writing 58001ff)
[139254.736000] PM: Writing back config space on device 0000:02:01.1 at offset 3 (was 822000, writing 82a800)
[139254.736000] PM: Writing back config space on device 0000:02:01.1 at offset 1 (was 4100007, writing 4100087)
[139254.736000] pci 0000:02:03.0: resuming
[139254.736000] PM: Writing back config space on device 0000:02:03.0 at offset 1 (was 2900116, writing 2900112)
[139254.736000] system 00:00: resuming
[139254.736000] pnp 00:01: resuming
[139254.736000] system 00:02: resuming
[139254.736000] system 00:03: resuming
[139254.736000] i8042 aux 00:04: resuming
[139254.736000] pnp: Device 00:04 does not support activation.
[139254.736000] i8042 kbd 00:05: resuming
[139254.736000] pnp: Device 00:05 does not support activation.
[139254.736000] pnp 00:06: resuming
[139254.736000] pnp 00:07: resuming
[139254.736000] system 00:08: resuming
[139254.736000] pnp 00:09: resuming
[139254.736000] pnp 00:0a: resuming
[139254.736000] serial 00:0b: resuming
[139254.772000] pnp: Device 00:0b activated.
[139254.772000] parport_pc 00:0c: resuming
[139254.812000] pnp: Device 00:0c activated.
[139254.812000] pnp 00:0d: resuming
[139254.812000] pcspkr pcspkr: resuming
[139254.812000] serial8250 serial8250: resuming
[139254.812000] i8042 i8042: resuming
[139254.816000] atkbd serio0: resuming
[139254.820000] platform eisa.0: resuming
[139254.820000] psmouse serio1: resuming
[139255.240000] platform vesafb.0: resuming
[139255.240000] usb usb1: resuming
[139255.280000] usb usb2: resuming
[139255.320000] usb usb3: resuming
[139255.360000] usb usb4: resuming
[139255.380000] sd 0:0:0:0: resuming
[139255.380000] ata1: soft resetting port
[139255.380000] sr 1:0:0:0: resuming
[139255.380000] ata2: soft resetting port
[139255.380000] iTCO_wdt iTCO_wdt: resuming
[139255.380000] ac97 0-0:STAC9750,51: resuming
[139255.380000] platform dock.0: resuming
[139255.380000] platform bluetooth: resuming
[139255.380000] Restarting tasks ... done.
[139255.468000] Enabling non-boot CPUs ...
[139255.560000] ata1.00: ata_hpa_resize 1: sectors = 58605120, hpa_sectors = 58605120
[139255.584000] ata1.00: ata_hpa_resize 1: sectors = 58605120, hpa_sectors = 58605120
[139255.584000] ata1.00: configured for UDMA/100
[139255.584000] ata1: EH complete
[139255.584000] SCSI device sda: 58605120 512-byte hdwr sectors (30006 MB)
[139255.588000] sda: Write Protect is off
[139255.588000] sda: Mode Sense: 00 3a 00 00
[139255.588000] SCSI device sda: write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[139255.864000] ata2.00: configured for UDMA/33
[139255.864000] ata2: EH complete
[139259.872000] tg3.c:v3.72 (January 8, 2007)
[139259.872000] ACPI: PCI Interrupt 0000:02:00.0[A] -> Link [LNKC] -> GSI 11 (level, low) -> IRQ 11
[139259.924000] eth0: Tigon3 [partno(BCM95705A50) rev 3001 PHY(5705)] (PCI:33MHz:32-bit) 10/100/1000Base-T Ethernet 00:11:43:3b:5e:6b
[139259.924000] eth0: RXcsums[1] LinkChgREG[1] MIirq[1] ASF[0] Split[0] WireSpeed[1] TSOcap[1]
[139259.924000] eth0: dma_rwctrl[763f0000] dma_mask[64-bit]
[139260.064000] ieee80211_crypt: registered algorithm 'NULL'
[139260.200000] ieee80211: 802.11 data/management/control stack, git-1.1.13
[139260.200000] ieee80211: Copyright (C) 2004-2005 Intel Corporation <jketreno@xxxxxxxxxxxxxxx>
[139260.364000] ipw2100: Intel(R) PRO/Wireless 2100 Network Driver, git-1.2.2
[139260.364000] ipw2100: Copyright(c) 2003-2006 Intel Corporation
[139260.368000] ACPI: PCI Interrupt 0000:02:03.0[A] -> Link [LNKB] -> GSI 5 (level, low) -> IRQ 5
[139260.368000] ipw2100: Detected Intel PRO/Wireless 2100 Network Connection
[139261.096000] PM: Writing back config space on device 0000:02:00.0 at offset c (was bff90000, writing 0)
[139261.096000] PM: Writing back config space on device 0000:02:00.0 at offset b (was 165d14e4, writing 865d1028)
[139261.096000] PM: Writing back config space on device 0000:02:00.0 at offset 3 (was 0, writing 2008)
[139261.096000] PM: Writing back config space on device 0000:02:00.0 at offset 2 (was 2000000, writing 2000001)
[139261.096000] PM: Writing back config space on device 0000:02:00.0 at offset 1 (was 2b00000, writing 2b00106)
[139261.388000] ADDRCONF(NETDEV_UP): eth0: link is not ready
[139262.068000] pccard: PCMCIA card inserted into slot 1
[139262.068000] pcmcia: registering new device pcmcia1.0
[139262.388000] ADDRCONF(NETDEV_CHANGE): eth1: link becomes ready
[139262.816000] agpgart: Found an AGP 2.0 compliant device at 0000:00:00.0.
[139262.816000] agpgart: Putting AGP V2 device at 0000:00:00.0 into 1x mode
[139262.816000] agpgart: Putting AGP V2 device at 0000:01:00.0 into 1x mode
[139262.816000] [drm] Loading R200 Microcode
[139263.104000] input: Lid Switch as /class/input/input8
[139263.108000] ACPI: Lid Switch [LID]
[139263.108000] input: Power Button (CM) as /class/input/input9
[139263.108000] ACPI: Power Button (CM) [PBTN]
[139263.108000] input: Sleep Button (CM) as /class/input/input10
[139263.108000] ACPI: Sleep Button (CM) [SBTN]
[139264.472000] ACPI: CPU0 (power states: C1[C1] C2[C2] C3[C3] C4[C3])
[139264.472000] ACPI: Processor [CPU0] (supports 8 throttling states)
[139264.484000] ACPI: Thermal Zone [THM] (30 C)
[139264.612000] ACPI: AC Adapter [AC] (off-line)
[139264.928000] ACPI: Battery Slot [BAT0] (battery present)
[139264.928000] ACPI: Battery Slot [BAT1] (battery absent)
[139272.648000] eth1: no IPv6 routers present
[139569.980000] ADDRCONF(NETDEV_CHANGE): eth1: link becomes ready
[139585.512000] eth1: no IPv6 routers present
Only plain text email is forwarded by the DISCUSS@xxxxxxxxxxxxx List Server.
Do use the following as the email Subject Line:
SomeName, YourCountry kernel 2.6.20-15-generic
This will alert cogent experts, and distinguish cases in the Archives.
YourCountry will enable Country Code guidance.
Occassionally responses are blocked by an Internet Provider mail filters.
So in a day, also check the Archived responses at http://www.linmodems.org .
Local Linux experts can be found through: http://www.linux.org/groups/index.html
-------------------------- System information ----------------------------
CPU=i686,
Linux version 2.6.20-15-generic (root@palmer) (gcc version 4.1.2 (Ubuntu 4.1.2-0ubuntu4)) #2 SMP Sun Apr 15 07:36:31 UTC 2007
scanModem update of: 2007_August_28
There are no blacklisted modem drivers in /etc/modprobe* files
USB modem not detected by lsusb
Several modems are supported by drivers with ALSA, the Advanced Linux Sound Architecture software.
Copying ALSA diagnostics to Modem/ALSAkeng.tgz
ALSAversion = 1.0.13
Modem or candidate host audio card have firmware information and diagnostics:
PCI slot PCI ID SubsystemID Name
---------- --------- --------- --------------
00:1f.6 8086:24c6 14f1:5422 Modem: Intel Corporation 82801DB/DBL/DBM
Modem interrupt assignment and sharing:
5: 17566 XT-PIC-XT Intel 82801DB-ICH4, eth1
--- Bootup diagnostics for card in PCI slot 00:1f.6 ----
[ 9.588695] ACPI: PCI Interrupt 0000:00:1f.6[B] -> Link [LNKB] -> GSI 5 (level, low) -> IRQ 5
[ 9.588706] ACPI: PCI interrupt for device 0000:00:1f.6 disabled
[ 1763.672000] pci 0000:00:1f.6: freeze
[ 1763.692000] pci 0000:00:1f.6: LATE freeze
[139253.692000] pci 0000:00:1f.6: EARLY resume
[139254.736000] pci 0000:00:1f.6: resuming
The PCI slot 00:1f.6 of the modem card may be disabled early in
a bootup process, but then enabled later. If modem drivers load
but the modem is not responsive, read Bootup.txt about possible fixes.
Send dmesg.txt along with ModemData.txt to discuss@xxxxxxxxxxxxx
if help is needed.
=== Finished modem firmware and bootup diagnostics section. ===
=== Next deducing cogent software ===
CodecFiles not found
