Hello,
Summary: have run 'scanmodem', don't know what to do
next.
=====================================================
Recently bought a refurbished Dell Latitude D610 with
XP on it, and then installed Ubuntu from a Linux
users' group CD. Installation and operation of Ubuntu,
no problem. Ubuntu is new to me.
My other home PC has Knoppix/Debian and uses a
softmodem with a Conexant driver over a 56KB dialup
line, for Internet connectivity. Took me a few hours
to get that all set up but after that, no
driver-behavior problems in more than a year. No other
Linux experience apart from these 2 systems.
Now I wish to begin using the built in dialup modem in
this laptop under Ubuntu. (Have not used it under
Windoze and don't want to!) Yes I know there is a
wireless capability in this system, but for the time
being I can only use it at home, where I have only
56KB land line dialup capability.
As a first step I got scanmodem and ran it. It looks
like maybe the next step is providing its
ModemData.txt and dmesg.txt output files (included,
below) here, and asking for help.
Based on my reading of information at
www.linuxant.com, it appears that the (Intel
82801-based) modem in my laptop system is not
supportible with a Conexant driver. But, I may be
wrong about that, --please let me know; I know how to
get and install a Conexant driver already, if there is
one that would work.
I am a bit concerned about the fact that 'scanmodem'
reported 'CodecFiles not found' at the end of its
report. Is this a problem?
Don't know how to determine whether there is already a
modem driver in the system (as part of Ubuntu),
versus, do I need to acquire an executable, versus, do
I need to acquire and compile source code, in order to
have a usable modem driver for Ubuntu?
What do I need to read or do next?
Thanks,
Steve
==================================================
ModemData.txt contents from running 'scanmodem':
==================================================
Only plain text email is forwarded by the
DISCUSS@xxxxxxxxxxxxx List Server.
Do use the following as the email Subject Line:
SomeName, YourCountry kernel
2.6.20-15-generic
This will alert cogent experts, and distinguish
cases in the Archives.
YourCountry will enable Country Code guidance.
Occassionally responses are blocked by an Internet
Provider mail filters.
So in a day, also check the Archived responses at
http://www.linmodems.org .
Local Linux experts can be found through:
http://www.linux.org/groups/index.html
-------------------------- System information
----------------------------
CPU=i686,
Linux version 2.6.20-15-generic (root@palmer) (gcc
version 4.1.2 (Ubuntu 4.1.2-0ubuntu4)) #2 SMP Sun Apr
15 07:36:31 UTC 2007
scanModem update of: 2007_August_27
There are no blacklisted modem drivers in
/etc/modprobe* files
USB modem not detected by lsusb
Several modems are supported by drivers with ALSA, the
Advanced Linux Sound Architecture software.
Copying ALSA diagnostics to Modem/ALSAsteve.tgz
ALSAversion = 1.0.13
Modem or candidate host audio card have firmware
information and diagnostics:
PCI slot PCI ID SubsystemID Name
---------- --------- --------- --------------
00:1e.3 8086:266d 14f1:5423 Modem: Intel Corporation
82801FB/FBM/FR/FW/FRW
Modem interrupt assignment and sharing:
18: 13325 IO-APIC-fasteoi uhci_hcd:usb2,
ipw2200
--- Bootup diagnostics for card in PCI slot 00:1e.3
----
[ 16.846497] ACPI: PCI Interrupt 0000:00:1e.3[B] ->
GSI 17 (level, low) -> IRQ 18
[ 16.846505] ACPI: PCI interrupt for device
0000:00:1e.3 disabled
The PCI slot 00:1e.3 of the modem card may be
disabled early in
a bootup process, but then enabled later. If modem
drivers load
but the modem is not responsive, read Bootup.txt
about possible fixes.
Send dmesg.txt along with ModemData.txt to
discuss@xxxxxxxxxxxxx
if help is needed.
PCI slot PCI ID SubsystemID Name
---------- --------- --------- --------------
03:01.5 104c:8038 1028:0182 Communication controller:
Texas Instruments PCI6515 SmartCard Controller
Modem interrupt assignment and sharing:
15: 1462 IO-APIC-edge libata
--- Bootup diagnostics for card in PCI slot 03:01.5
----
=== Finished modem firmware and bootup diagnostics
section. ===
=== Next deducing cogent software ===
CodecFiles not found
==================================================
dmesg.txt contents from running 'scanmodem':
==================================================
CPU0
0: 94270 IO-APIC-edge timer
1: 584 IO-APIC-edge i8042
7: 0 IO-APIC-edge parport0
8: 3 IO-APIC-edge rtc
9: 3 IO-APIC-fasteoi acpi
12: 2474 IO-APIC-edge i8042
14: 6332 IO-APIC-edge libata
15: 1462 IO-APIC-edge libata
16: 22764 IO-APIC-fasteoi uhci_hcd:usb1,
ehci_hcd:usb5, eth0, Intel ICH6,
radeon@pci:0000:01:00.0
17: 1 IO-APIC-fasteoi uhci_hcd:usb4,
yenta
18: 13327 IO-APIC-fasteoi uhci_hcd:usb2,
ipw2200
19: 0 IO-APIC-fasteoi uhci_hcd:usb3
NMI: 0
LOC: 94154
ERR: 0
MIS: 0
[ 0.000000] Linux version 2.6.20-15-generic
(root@palmer) (gcc version 4.1.2 (Ubuntu
4.1.2-0ubuntu4)) #2 SMP Sun Apr 15 07:36:31 UTC 2007
(Ubuntu 2.6.20-15.27-generic)
[ 0.000000] BIOS-provided physical RAM map:
[ 0.000000] sanitize start
[ 0.000000] sanitize end
[ 0.000000] copy_e820_map() start: 0000000000000000
size: 000000000009f000 end: 000000000009f000 type: 1
[ 0.000000] copy_e820_map() type is E820_RAM
[ 0.000000] copy_e820_map() start: 000000000009f000
size: 0000000000001000 end: 00000000000a0000 type: 2
[ 0.000000] copy_e820_map() start: 0000000000100000
size: 000000003fed1800 end: 000000003ffd1800 type: 1
[ 0.000000] copy_e820_map() type is E820_RAM
[ 0.000000] copy_e820_map() start: 000000003ffd1800
size: 000000000002e800 end: 0000000040000000 type: 2
[ 0.000000] copy_e820_map() start: 00000000e0000000
size: 0000000010007000 end: 00000000f0007000 type: 2
[ 0.000000] copy_e820_map() start: 00000000f0008000
size: 0000000000004000 end: 00000000f000c000 type: 2
[ 0.000000] copy_e820_map() start: 00000000fec00000
size: 0000000000010000 end: 00000000fec10000 type: 2
[ 0.000000] copy_e820_map() start: 00000000fed20000
size: 00000000000f0000 end: 00000000fee10000 type: 2
[ 0.000000] copy_e820_map() start: 00000000ffb00000
size: 0000000000500000 end: 0000000100000000 type: 2
[ 0.000000] BIOS-e820: 0000000000000000 -
000000000009f000 (usable)
[ 0.000000] BIOS-e820: 000000000009f000 -
00000000000a0000 (reserved)
[ 0.000000] BIOS-e820: 0000000000100000 -
000000003ffd1800 (usable)
[ 0.000000] BIOS-e820: 000000003ffd1800 -
0000000040000000 (reserved)
[ 0.000000] BIOS-e820: 00000000e0000000 -
00000000f0007000 (reserved)
[ 0.000000] BIOS-e820: 00000000f0008000 -
00000000f000c000 (reserved)
[ 0.000000] BIOS-e820: 00000000fec00000 -
00000000fec10000 (reserved)
[ 0.000000] BIOS-e820: 00000000fed20000 -
00000000fee10000 (reserved)
[ 0.000000] BIOS-e820: 00000000ffb00000 -
0000000100000000 (reserved)
[ 0.000000] 127MB HIGHMEM available.
[ 0.000000] 896MB LOWMEM available.
[ 0.000000] Entering add_active_range(0, 0, 262097)
0 entries of 256 used
[ 0.000000] Zone PFN ranges:
[ 0.000000] DMA 0 -> 4096
[ 0.000000] Normal 4096 -> 229376
[ 0.000000] HighMem 229376 -> 262097
[ 0.000000] early_node_map[1] active PFN ranges
[ 0.000000] 0: 0 -> 262097
[ 0.000000] On node 0 totalpages: 262097
[ 0.000000] DMA zone: 32 pages used for memmap
[ 0.000000] DMA zone: 0 pages reserved
[ 0.000000] DMA zone: 4064 pages, LIFO batch:0
[ 0.000000] Normal zone: 1760 pages used for
memmap
[ 0.000000] Normal zone: 223520 pages, LIFO
batch:31
[ 0.000000] HighMem zone: 255 pages used for
memmap
[ 0.000000] HighMem zone: 32466 pages, LIFO
batch:7
[ 0.000000] DMI 2.3 present.
[ 0.000000] ACPI: RSDP (v000 DELL
) @ 0x000fc9b0
[ 0.000000] ACPI: RSDT (v001 DELL CPi R
0x27d50302 ASL 0x00000061) @ 0x3ffd1f90
[ 0.000000] ACPI: FADT (v001 DELL CPi R
0x27d50302 ASL 0x00000061) @ 0x3ffd2c00
[ 0.000000] ACPI: MADT (v001 DELL CPi R
0x27d50302 ASL 0x00000047) @ 0x3ffd3400
[ 0.000000] ACPI: ASF! (v016 DELL CPi R
0x27d50302 ASL 0x00000061) @ 0x3ffd3000
[ 0.000000] ACPI: MCFG (v016 DELL CPi R
0x27d50302 ASL 0x00000061) @ 0x3ffd33c0
[ 0.000000] ACPI: SSDT (v001 PmRef Cpu0Ist
0x00003000 INTL 0x20030522) @ 0x3ffd23e6
[ 0.000000] ACPI: SSDT (v001 PmRef Cpu0Cst
0x00003001 INTL 0x20030522) @ 0x3ffd220e
[ 0.000000] ACPI: SSDT (v001 PmRef CpuPm
0x00003000 INTL 0x20030522) @ 0x3ffd2013
[ 0.000000] ACPI: DSDT (v001 INT430 SYSFexxx
0x00001001 MSFT 0x0100000e) @ 0x00000000
[ 0.000000] ACPI: PM-Timer IO Port: 0x1008
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] ACPI: LAPIC (acpi_id[0x00]
lapic_id[0x00] enabled)
[ 0.000000] Processor #0 6:13 APIC version 20
[ 0.000000] ACPI: LAPIC (acpi_id[0x01]
lapic_id[0x01] disabled)
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x00] high
edge lint[0x1])
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x01] high
edge lint[0x1])
[ 0.000000] ACPI: IOAPIC (id[0x01]
address[0xfec00000] gsi_base[0])
[ 0.000000] IOAPIC[0]: apic_id 1, version 32,
address 0xfec00000, GSI 0-23
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0
global_irq 2 dfl dfl)
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9
global_irq 9 high level)
[ 0.000000] ACPI: IRQ0 used by override.
[ 0.000000] ACPI: IRQ2 used by override.
[ 0.000000] ACPI: IRQ9 used by override.
[ 0.000000] Enabling APIC mode: Flat. Using 1 I/O
APICs
[ 0.000000] Using ACPI (MADT) for SMP configuration
information
[ 0.000000] Allocating PCI resources starting at
50000000 (gap: 40000000:a0000000)
[ 0.000000] Detected 1995.068 MHz processor.
[ 14.944968] Built 1 zonelists. Total pages: 260050
[ 14.944972] Kernel command line:
root=UUID=5d71caf6-d53f-4470-8186-cdfdb3365d0c ro
quiet splash
[ 14.945110] mapped APIC to ffffd000 (fee00000)
[ 14.945112] mapped IOAPIC to ffffc000 (fec00000)
[ 14.945115] Enabling fast FPU save and restore...
done.
[ 14.945118] Enabling unmasked SIMD FPU exception
support... done.
[ 14.945126] Initializing CPU#0
[ 14.945195] PID hash table entries: 4096 (order:
12, 16384 bytes)
[ 14.946388] Console: colour VGA+ 80x25
[ 14.946708] Dentry cache hash table entries: 131072
(order: 7, 524288 bytes)
[ 14.947091] Inode-cache hash table entries: 65536
(order: 6, 262144 bytes)
[ 14.973081] Memory: 1027948k/1048388k available
(1992k kernel code, 19696k reserved, 893k data, 328k
init, 130884k highmem)
[ 14.973089] virtual kernel memory layout:
[ 14.973090] fixmap : 0xfff4e000 - 0xfffff000
( 708 kB)
[ 14.973091] pkmap : 0xff800000 - 0xffc00000
(4096 kB)
[ 14.973092] vmalloc : 0xf8800000 - 0xff7fe000
( 111 MB)
[ 14.973093] lowmem : 0xc0000000 - 0xf8000000
( 896 MB)
[ 14.973094] .init : 0xc03d7000 - 0xc0429000
( 328 kB)
[ 14.973095] .data : 0xc02f2264 - 0xc03d16d4
( 893 kB)
[ 14.973097] .text : 0xc0100000 - 0xc02f2264
(1992 kB)
[ 14.973100] Checking if this processor honours the
WP bit even in supervisor mode... Ok.
[ 15.049151] Calibrating delay using timer specific
routine.. 3994.12 BogoMIPS (lpj=7988244)
[ 15.049186] Security Framework v1.0.0 initialized
[ 15.049192] SELinux: Disabled at boot.
[ 15.049206] Mount-cache hash table entries: 512
[ 15.049320] CPU: After generic identify, caps:
afe9fbff 00100000 00000000 00000000 00000180 00000000
00000000
[ 15.049330] CPU: L1 I cache: 32K, L1 D cache: 32K
[ 15.049332] CPU: L2 cache: 2048K
[ 15.049335] CPU: After all inits, caps: afe9fbff
00100000 00000000 00002040 00000180 00000000 00000000
[ 15.049343] Compat vDSO mapped to ffffe000.
[ 15.049346] Remapping vsyscall page to ffffe000
[ 15.049355] Checking 'hlt' instruction... OK.
[ 15.065220] SMP alternatives: switching to UP code
[ 15.065375] Freeing SMP alternatives: 11k freed
[ 15.065524] Early unpacking initramfs... done
[ 15.354385] ACPI: Core revision 20060707
[ 15.362998] ACPI: Looking for DSDT in initramfs...
file /DSDT.aml not found, using machine DSDT.
[ 15.367308] CPU0: Intel(R) Pentium(R) M processor
2.00GHz stepping 08
[ 15.367328] Total of 1 processors activated
(3994.12 BogoMIPS).
[ 15.367517] ENABLING IO-APIC IRQs
[ 15.367708] ..TIMER: vector=0x31 apic1=0 pin1=2
apic2=-1 pin2=-1
[ 15.512955] Brought up 1 CPUs
[ 15.513154] Booting paravirtualized kernel on bare
hardware
[ 15.513222] Time: 21:39:50 Date: 07/27/107
[ 15.513247] NET: Registered protocol family 16
[ 15.513315] EISA bus registered
[ 15.513319] ACPI: bus type pci registered
[ 15.550789] PCI: PCI BIOS revision 2.10 entry at
0xfb5be, last bus=4
[ 15.550790] PCI: Using configuration type 1
[ 15.550792] Setting up standard PCI resources
[ 15.582034] ACPI (exconfig-0455): Dynamic SSDT Load
- OemId [ LMPWR] OemTableId [ DELLLOM] [20060707]
[ 15.582086] ACPI: Interpreter enabled
[ 15.582088] ACPI: Using IOAPIC for interrupt
routing
[ 15.583566] ACPI: PCI Root Bridge [PCI0] (0000:00)
[ 15.583573] PCI: Probing PCI hardware (bus 00)
[ 15.583678] ACPI: Assume root bridge [\_SB_.PCI0]
bus is 0
[ 15.595481] PCI quirk: region 1000-107f claimed by
ICH6 ACPI/GPIO/TCO
[ 15.595485] PCI quirk: region 1080-10bf claimed by
ICH6 GPIO
[ 15.595674] Boot video device is 0000:01:00.0
[ 15.596141] PCI: Transparent bridge - 0000:00:1e.0
[ 15.596200] PCI: Bus #04 (-#07) is hidden behind
transparent bridge #03 (-#04) (try
'pci=assign-busses')
[ 15.596202] Please report the result to
linux-kernel to fix this permanently
[ 15.596241] ACPI: PCI Interrupt Routing Table
[\_SB_.PCI0._PRT]
[ 15.710118] ACPI: PCI Interrupt Link [LNKA] (IRQs 9
10 *11)
[ 15.710330] ACPI: PCI Interrupt Link [LNKB] (IRQs 5
7) *10
[ 15.710540] ACPI: PCI Interrupt Link [LNKC] (IRQs
*9 10 11)
[ 15.710749] ACPI: PCI Interrupt Link [LNKD] (IRQs
*5 7 9 10 11)
[ 15.710949] ACPI: PCI Interrupt Link [LNKE] (IRQs 3
4 5 6 7 9 10 11 12 14 15) *0, disabled.
[ 15.711152] ACPI: PCI Interrupt Link [LNKF] (IRQs 3
4 5 6 7 9 10 11 12 14 15) *0, disabled.
[ 15.711357] ACPI: PCI Interrupt Link [LNKH] (IRQs 3
4 5 6 7 9 10 11 12 14 15) *0, disabled.
[ 15.712898] ACPI: PCI Interrupt Routing Table
[\_SB_.PCI0.AGP_._PRT]
[ 15.713807] ACPI: PCI Interrupt Routing Table
[\_SB_.PCI0.PCIE._PRT]
[ 15.757331] Linux Plug and Play Support v0.97 (c)
Adam Belay
[ 15.757338] pnp: PnP ACPI init
[ 15.821334] pnp: PnP ACPI: found 14 devices
[ 15.821338] PnPBIOS: Disabled by ACPI PNP
[ 15.821367] PCI: Using ACPI for IRQ routing
[ 15.821369] PCI: If a device doesn't work, try
"pci=routeirq". If it helps, post a report
[ 15.837073] NET: Registered protocol family 8
[ 15.837075] NET: Registered protocol family 20
[ 15.851074] pnp: 00:02: ioport range 0x4d0-0x4d1
has been reserved
[ 15.851077] pnp: 00:02: ioport range 0x1000-0x1005
could not be reserved
[ 15.851080] pnp: 00:02: ioport range 0x1008-0x100f
could not be reserved
[ 15.851084] pnp: 00:03: ioport range 0xf400-0xf4fe
has been reserved
[ 15.851087] pnp: 00:03: ioport range 0x1006-0x1007
has been reserved
[ 15.851089] pnp: 00:03: ioport range 0x100a-0x1059
could not be reserved
[ 15.851092] pnp: 00:03: ioport range 0x1060-0x107f
has been reserved
[ 15.851094] pnp: 00:03: ioport range 0x1080-0x10bf
has been reserved
[ 15.851097] pnp: 00:03: ioport range 0x10c0-0x10df
has been reserved
[ 15.851102] pnp: 00:08: ioport range 0x900-0x90f
has been reserved
[ 15.851104] pnp: 00:08: ioport range 0x910-0x91f
has been reserved
[ 15.851106] pnp: 00:08: ioport range 0x920-0x92f
has been reserved
[ 15.851108] pnp: 00:08: ioport range 0x93c-0x93f
has been reserved
[ 15.851111] pnp: 00:08: ioport range 0x940-0x97f
has been reserved
[ 15.851116] pnp: 00:0d: ioport range 0x930-0x93b
has been reserved
[ 15.851326] PCI: Bridge: 0000:00:01.0
[ 15.851329] IO window: d000-dfff
[ 15.851332] MEM window: dfd00000-dfefffff
[ 15.851335] PREFETCH window: d0000000-d7ffffff
[ 15.851338] PCI: Bridge: 0000:00:1c.0
[ 15.851339] IO window: disabled.
[ 15.851345] MEM window: dfc00000-dfcfffff
[ 15.851348] PREFETCH window: disabled.
[ 15.851359] PCI: Bus 4, cardbus bridge:
0000:03:01.0
[ 15.851361] IO window: 00002000-000020ff
[ 15.851366] IO window: 00002400-000024ff
[ 15.851371] PREFETCH window: 50000000-53ffffff
[ 15.851376] MEM window: 54000000-57ffffff
[ 15.851381] PCI: Bridge: 0000:00:1e.0
[ 15.851384] IO window: 2000-2fff
[ 15.851389] MEM window: dfb00000-dfbfffff
[ 15.851393] PREFETCH window: 50000000-53ffffff
[ 15.851408] ACPI: PCI Interrupt 0000:00:01.0[A] ->
GSI 16 (level, low) -> IRQ 16
[ 15.851413] PCI: Setting latency timer of device
0000:00:01.0 to 64
[ 15.851432] ACPI: PCI Interrupt 0000:00:1c.0[A] ->
GSI 16 (level, low) -> IRQ 16
[ 15.851437] PCI: Setting latency timer of device
0000:00:1c.0 to 64
[ 15.851449] PCI: Setting latency timer of device
0000:00:1e.0 to 64
[ 15.851464] PCI: Enabling device 0000:03:01.0 (0000
-> 0003)
[ 15.851469] ACPI: PCI Interrupt 0000:03:01.0[A] ->
GSI 19 (level, low) -> IRQ 17
[ 15.851490] NET: Registered protocol family 2
[ 15.888806] IP route cache hash table entries:
32768 (order: 5, 131072 bytes)
[ 15.888898] TCP established hash table entries:
131072 (order: 8, 1048576 bytes)
[ 15.889612] TCP bind hash table entries: 65536
(order: 7, 524288 bytes)
[ 15.890087] TCP: Hash tables configured
(established 131072 bind 65536)
[ 15.890091] TCP reno registered
[ 15.900884] checking if image is initramfs... it is
[ 16.469249] Freeing initrd memory: 7010k freed
[ 16.469647] audit: initializing netlink socket
(disabled)
[ 16.469661] audit(1188250790.500:1): initialized
[ 16.469726] highmem bounce pool size: 64 pages
[ 16.469783] VFS: Disk quotas dquot_6.5.1
[ 16.469801] Dquot-cache hash table entries: 1024
(order 0, 4096 bytes)
[ 16.469849] io scheduler noop registered
[ 16.469851] io scheduler anticipatory registered
[ 16.469853] io scheduler deadline registered
[ 16.469861] io scheduler cfq registered (default)
[ 16.470106] PCI: Setting latency timer of device
0000:00:01.0 to 64
[ 16.470133] assign_interrupt_mode Found MSI
capability
[ 16.470136] Allocate Port
Service[0000:00:01.0:pcie00]
[ 16.470207] PCI: Setting latency timer of device
0000:00:1c.0 to 64
[ 16.470256] assign_interrupt_mode Found MSI
capability
[ 16.470259] Allocate Port
Service[0000:00:1c.0:pcie00]
[ 16.470281] Allocate Port
Service[0000:00:1c.0:pcie02]
[ 16.470426] isapnp: Scanning for PnP cards...
[ 16.825020] isapnp: No Plug & Play device found
[ 16.845550] Real Time Clock Driver v1.12ac
[ 16.845606] Serial: 8250/16550 driver $Revision:
1.90 $ 4 ports, IRQ sharing enabled
[ 16.845741] serial8250: ttyS0 at I/O 0x3f8 (irq =
4) is a 16550A
[ 16.846349] 00:0b: ttyS0 at I/O 0x3f8 (irq = 4) is
a 16550A
[ 16.846497] ACPI: PCI Interrupt 0000:00:1e.3[B] ->
GSI 17 (level, low) -> IRQ 18
[ 16.846505] ACPI: PCI interrupt for device
0000:00:1e.3 disabled
[ 16.846567] mice: PS/2 mouse device common for all
mice
[ 16.847015] RAMDISK driver initialized: 16 RAM
disks of 65536K size 1024 blocksize
[ 16.847207] input: Macintosh mouse button emulation
as /class/input/input0
[ 16.847234] Uniform Multi-Platform E-IDE driver
Revision: 7.00alpha2
[ 16.847238] ide: Assuming 33MHz system bus speed
for PIO modes; override with idebus=xx
[ 16.847445] PNP: PS/2 Controller
[PNP0303:KBC,PNP0f13:PS2M] at 0x60,0x64 irq 1,12
[ 16.853028] serio: i8042 KBD port at 0x60,0x64 irq
1
[ 16.853033] serio: i8042 AUX port at 0x60,0x64 irq
12
[ 16.853183] EISA: Probing bus 0 at eisa.0
[ 16.853191] Cannot allocate resource for EISA slot
1
[ 16.853193] Cannot allocate resource for EISA slot
2
[ 16.853216] EISA: Detected 0 cards.
[ 16.883292] TCP cubic registered
[ 16.883300] NET: Registered protocol family 1
[ 16.883319] Using IPI No-Shortcut mode
[ 16.883384] ACPI: (supports S0 S3 S4 S5)
[ 16.883424] Magic number: 3:403:703
[ 16.883687] Freeing unused kernel memory: 328k
freed
[ 16.884243] Time: tsc clocksource has been
installed.
[ 16.897791] input: AT Translated Set 2 keyboard as
/class/input/input1
[ 18.064542] Capability LSM initialized
[ 18.093381] ACPI: CPU0 (power states: C1[C1] C2[C2]
C3[C3] C4[C3])
[ 18.093387] ACPI: Processor [CPU0] (supports 8
throttling states)
[ 18.093394] ACPI Exception (acpi_processor-0677):
AE_NOT_FOUND, Processor Device is not present
[20060707]
[ 18.096663] ACPI: Thermal Zone [THM] (47 C)
[ 18.384725] usbcore: registered new interface
driver usbfs
[ 18.384751] usbcore: registered new interface
driver hub
[ 18.384766] usbcore: registered new device driver
usb
[ 18.385446] USB Universal Host Controller Interface
driver v3.0
[ 18.385487] ACPI: PCI Interrupt 0000:00:1d.0[A] ->
GSI 16 (level, low) -> IRQ 16
[ 18.385499] PCI: Setting latency timer of device
0000:00:1d.0 to 64
[ 18.385502] uhci_hcd 0000:00:1d.0: UHCI Host
Controller
[ 18.385644] uhci_hcd 0000:00:1d.0: new USB bus
registered, assigned bus number 1
[ 18.385675] uhci_hcd 0000:00:1d.0: irq 16, io base
0x0000bf80
[ 18.385769] usb usb1: configuration #1 chosen from
1 choice
[ 18.385786] hub 1-0:1.0: USB hub found
[ 18.385791] hub 1-0:1.0: 2 ports detected
[ 18.459706] SCSI subsystem initialized
[ 18.464035] libata version 2.20 loaded.
[ 18.487583] ACPI: PCI Interrupt 0000:00:1d.1[B] ->
GSI 17 (level, low) -> IRQ 18
[ 18.487596] PCI: Setting latency timer of device
0000:00:1d.1 to 64
[ 18.487600] uhci_hcd 0000:00:1d.1: UHCI Host
Controller
[ 18.487617] uhci_hcd 0000:00:1d.1: new USB bus
registered, assigned bus number 2
[ 18.487649] uhci_hcd 0000:00:1d.1: irq 18, io base
0x0000bf60
[ 18.487729] usb usb2: configuration #1 chosen from
1 choice
[ 18.487749] hub 2-0:1.0: USB hub found
[ 18.487754] hub 2-0:1.0: 2 ports detected
[ 18.591535] ACPI: PCI Interrupt 0000:00:1d.2[C] ->
GSI 18 (level, low) -> IRQ 19
[ 18.591548] PCI: Setting latency timer of device
0000:00:1d.2 to 64
[ 18.591552] uhci_hcd 0000:00:1d.2: UHCI Host
Controller
[ 18.591570] uhci_hcd 0000:00:1d.2: new USB bus
registered, assigned bus number 3
[ 18.591600] uhci_hcd 0000:00:1d.2: irq 19, io base
0x0000bf40
[ 18.591680] usb usb3: configuration #1 chosen from
1 choice
[ 18.591702] hub 3-0:1.0: USB hub found
[ 18.591707] hub 3-0:1.0: 2 ports detected
[ 3.500000] Time: acpi_pm clocksource has been
installed.
[ 3.544000] ACPI: PCI Interrupt 0000:00:1d.3[D] ->
GSI 19 (level, low) -> IRQ 17
[ 3.544000] PCI: Setting latency timer of device
0000:00:1d.3 to 64
[ 3.544000] uhci_hcd 0000:00:1d.3: UHCI Host
Controller
[ 3.544000] uhci_hcd 0000:00:1d.3: new USB bus
registered, assigned bus number 4
[ 3.544000] uhci_hcd 0000:00:1d.3: irq 17, io base
0x0000bf20
[ 3.544000] usb usb4: configuration #1 chosen from
1 choice
[ 3.544000] hub 4-0:1.0: USB hub found
[ 3.544000] hub 4-0:1.0: 2 ports detected
[ 3.576000] usb 1-2: new full speed USB device
using uhci_hcd and address 2
[ 3.648000] tg3.c:v3.72 (January 8, 2007)
[ 3.648000] ACPI: PCI Interrupt 0000:02:00.0[A] ->
GSI 16 (level, low) -> IRQ 16
[ 3.648000] PCI: Setting latency timer of device
0000:02:00.0 to 64
[ 3.668000] eth0: Tigon3 [partno(BCM95751) rev 4001
PHY(5750)] (PCI Express) 10/100/1000Base-T Ethernet
00:12:3f:00:6b:d2
[ 3.668000] eth0: RXcsums[1] LinkChgREG[1] MIirq[1]
ASF[0] Split[0] WireSpeed[1] TSOcap[1]
[ 3.668000] eth0: dma_rwctrl[76180000]
dma_mask[64-bit]
[ 3.668000] ata_piix 0000:00:1f.2: version 2.10ac1
[ 3.668000] ata_piix 0000:00:1f.2: MAP [ P0 P2 IDE
IDE ]
[ 3.720000] usb 1-2: configuration #1 chosen from 1
choice
[ 3.724000] hub 1-2:1.0: USB hub found
[ 3.728000] hub 1-2:1.0: 4 ports detected
[ 3.824000] ACPI: PCI Interrupt 0000:00:1f.2[B] ->
GSI 17 (level, low) -> IRQ 18
[ 3.824000] PCI: Setting latency timer of device
0000:00:1f.2 to 64
[ 3.824000] ata1: SATA max UDMA/133 cmd 0x000101f0
ctl 0x000103f6 bmdma 0x0001bfa0 irq 14
[ 3.824000] ata2: PATA max UDMA/100 cmd 0x00010170
ctl 0x00010376 bmdma 0x0001bfa8 irq 15
[ 3.824000] scsi0 : ata_piix
[ 3.988000] ata1.00: ata_hpa_resize 1: sectors =
117210240, hpa_sectors = 117210240
[ 3.988000] ata1.00: ATA-6: HTS548060M9AT00,
MGBOA5EA, max UDMA/100
[ 3.988000] ata1.00: 117210240 sectors, multi 8:
LBA48
[ 3.988000] ata1.00: applying bridge limits
[ 3.996000] ata1.00: ata_hpa_resize 1: sectors =
117210240, hpa_sectors = 117210240
[ 3.996000] ata1.00: configured for UDMA/100
[ 3.996000] scsi1 : ata_piix
[ 4.332000] ata2.00: ATAPI, max UDMA/33
[ 4.528000] ata2.00: configured for UDMA/33
[ 4.528000] scsi 0:0:0:0: Direct-Access ATA
HTS548060M9AT00 MGBO PQ: 0 ANSI: 5
[ 4.564000] scsi 1:0:0:0: CD-ROM _NEC
DVD+-RW ND-6500A 202C PQ: 0 ANSI: 5
[ 4.564000] ACPI: PCI Interrupt 0000:00:1d.7[A] ->
GSI 16 (level, low) -> IRQ 16
[ 4.564000] PCI: Setting latency timer of device
0000:00:1d.7 to 64
[ 4.564000] ehci_hcd 0000:00:1d.7: EHCI Host
Controller
[ 4.564000] ehci_hcd 0000:00:1d.7: new USB bus
registered, assigned bus number 5
[ 4.564000] ehci_hcd 0000:00:1d.7: debug port 1
[ 4.564000] PCI: cache line size of 32 is not
supported by device 0000:00:1d.7
[ 4.564000] ehci_hcd 0000:00:1d.7: irq 16, io mem
0xffa80800
[ 4.568000] ehci_hcd 0000:00:1d.7: USB 2.0 started,
EHCI 1.00, driver 10 Dec 2004
[ 4.572000] usb usb5: configuration #1 chosen from
1 choice
[ 4.572000] hub 5-0:1.0: USB hub found
[ 4.572000] hub 5-0:1.0: 8 ports detected
[ 4.584000] SCSI device sda: 117210240 512-byte
hdwr sectors (60012 MB)
[ 4.584000] sda: Write Protect is off
[ 4.584000] sda: Mode Sense: 00 3a 00 00
[ 4.584000] SCSI device sda: write cache: enabled,
read cache: enabled, doesn't support DPO or FUA
[ 4.584000] SCSI device sda: 117210240 512-byte
hdwr sectors (60012 MB)
[ 4.584000] sda: Write Protect is off
[ 4.584000] sda: Mode Sense: 00 3a 00 00
[ 4.584000] SCSI device sda: write cache: enabled,
read cache: enabled, doesn't support DPO or FUA
[ 4.584000] sda:<6>usb 1-2: USB disconnect,
address 2
[ 4.608000] sda1 sda2 sda3 < sda5 >
[ 4.628000] sd 0:0:0:0: Attached scsi disk sda
[ 4.632000] sd 0:0:0:0: Attached scsi generic sg0
type 0
[ 4.632000] scsi 1:0:0:0: Attached scsi generic sg1
type 5
[ 4.824000] sr0: scsi3-mmc drive: 24x/24x writer
cd/rw xa/form2 cdda tray
[ 4.824000] Uniform CD-ROM driver Revision: 3.20
[ 4.824000] sr 1:0:0:0: Attached scsi CD-ROM sr0
[ 4.904000] Attempting manual resume
[ 4.904000] swsusp: Resume From Partition 8:5
[ 4.904000] PM: Checking swsusp image.
[ 4.908000] PM: Resume from disk failed.
[ 4.928000] kjournald starting. Commit interval 5
seconds
[ 4.928000] EXT3-fs: mounted filesystem with
ordered data mode.
[ 4.964000] usb 5-2: new high speed USB device
using ehci_hcd and address 2
[ 5.096000] usb 5-2: configuration #1 chosen from 1
choice
[ 5.096000] hub 5-2:1.0: USB hub found
[ 5.096000] hub 5-2:1.0: 4 ports detected
[ 16.196000] PM: Writing back config space on device
0000:02:00.0 at offset c (was 3e1e0000, writing 0)
[ 17.180000] pci_hotplug: PCI Hot Plug PCI Core
version: 0.5
[ 17.196000] shpchp: Standard Hot Plug PCI
Controller Driver version: 0.4
[ 17.384000] iTCO_vendor_support: vendor-support=0
[ 17.384000] iTCO_wdt: Intel TCO WatchDog Timer
Driver v1.01 (11-Nov-2006)
[ 17.384000] iTCO_wdt: Found a ICH6-M TCO device
(Version=2, TCOBASE=0x1060)
[ 17.384000] iTCO_wdt: initialized. heartbeat=30 sec
(nowayout=0)
[ 17.412000] NET: Registered protocol family 17
[ 17.440000] intel_rng: FWH not detected
[ 17.728000] Linux agpgart interface v0.102 (c) Dave
Jones
[ 17.736000] agpgart: Detected an Intel 915GM
Chipset.
[ 17.752000] agpgart: AGP aperture is 256M @ 0x0
[ 17.956000] Yenta: CardBus bridge found at
0000:03:01.0 [1028:0182]
[ 17.956000] Yenta: Using CSCINT to route CSC
interrupts to PCI
[ 17.956000] Yenta: Routing CardBus interrupts to
PCI
[ 17.956000] Yenta TI: socket 0000:03:01.0, mfunc
0x01111122, devctl 0x64
[ 18.192000] Yenta: ISA IRQ mask 0x0cf8, PCI irq 17
[ 18.192000] Socket status: 30000006
[ 18.192000] Yenta: Raising subordinate bus# of
parent bus (#03) from #04 to #07
[ 18.192000] pcmcia: parent PCI bridge I/O window:
0x2000 - 0x2fff
[ 18.192000] cs: IO port probe 0x2000-0x2fff: clean.
[ 18.192000] pcmcia: parent PCI bridge Memory
window: 0xdfb00000 - 0xdfbfffff
[ 18.192000] pcmcia: parent PCI bridge Memory
window: 0x50000000 - 0x53ffffff
[ 18.192000] ieee80211_crypt: registered algorithm
'NULL'
[ 18.192000] ieee80211: 802.11
data/management/control stack, git-1.1.13
[ 18.192000] ieee80211: Copyright (C) 2004-2005
Intel Corporation <jketreno@xxxxxxxxxxxxxxx>
[ 18.224000] ipw2200: Intel(R) PRO/Wireless
2200/2915 Network Driver, 1.2.0kmprq
[ 18.224000] ipw2200: Copyright(c) 2003-2006 Intel
Corporation
[ 18.224000] ACPI: PCI Interrupt 0000:03:03.0[A] ->
GSI 17 (level, low) -> IRQ 18
[ 18.224000] ipw2200: Detected Intel PRO/Wireless
2200BG Network Connection
[ 18.328000] input: PC Speaker as
/class/input/input2
[ 18.592000] ipw2200: Detected geography ZZM (11
802.11bg channels, 0 802.11a channels)
[ 18.612000] parport: PnPBIOS parport detected.
[ 18.612000] parport0: PC-style at 0x378 (0x778),
irq 7, dma 1 [PCSPP,TRISTATE,COMPAT,ECP,DMA]
[ 18.760000] ACPI: PCI Interrupt 0000:00:1e.2[A] ->
GSI 16 (level, low) -> IRQ 16
[ 18.760000] PCI: Setting latency timer of device
0000:00:1e.2 to 64
[ 18.936000] cs: IO port probe 0x100-0x3af: clean.
[ 18.940000] cs: IO port probe 0x3e0-0x4ff: clean.
[ 18.940000] cs: IO port probe 0x820-0x8ff: clean.
[ 18.940000] cs: IO port probe 0xc00-0xcf7: clean.
[ 18.940000] cs: IO port probe 0xa00-0xaff: clean.
[ 19.240000] input: ImPS/2 Generic Wheel Mouse as
/class/input/input3
[ 19.580000] intel8x0_measure_ac97_clock: measured
55529 usecs
[ 19.580000] intel8x0: clocking to 48000
[ 19.712000] fuse init (API version 7.8)
[ 19.732000] lp0: using parport0 (interrupt-driven).
[ 19.748000] Adding 1188768k swap on
/dev/disk/by-uuid/398787db-9f95-4e6a-8ed4-dda2f90b9d22.
Priority:-1 extents:1 across:1188768k
[ 19.924000] EXT3 FS on sda2, internal journal
[ 24.360000] ACPI: Battery Slot [BAT0] (battery
present)
[ 24.360000] ACPI: Battery Slot [BAT1] (battery
absent)
[ 24.372000] ACPI: AC Adapter [AC] (on-line)
[ 24.384000] ACPI: Video Device [VID] (multi-head:
yes rom: no post: no)
[ 24.384000] ACPI: Video Device [VID] (multi-head:
yes rom: no post: no)
[ 24.384000] ACPI: Video Device [VID2] (multi-head:
yes rom: no post: no)
[ 24.480000] Using specific hotkey driver
[ 24.532000] input: Lid Switch as
/class/input/input4
[ 24.536000] ACPI: Lid Switch [LID]
[ 24.568000] input: Power Button (CM) as
/class/input/input5
[ 24.568000] ACPI: Power Button (CM) [PBTN]
[ 24.600000] input: Sleep Button (CM) as
/class/input/input6
[ 24.600000] ACPI: Sleep Button (CM) [SBTN]
[ 24.668000] ACPI: ACPI Dock Station Driver
[ 24.724000] ibm_acpi: ec object not found
[ 24.780000] pcc_acpi: loading...
[ 28.844000] [drm] Initialized drm 1.1.0 20060810
[ 28.856000] ACPI: PCI Interrupt 0000:01:00.0[A] ->
GSI 16 (level, low) -> IRQ 16
[ 28.860000] [drm] Initialized radeon 1.25.0
20060524 on minor 0
[ 29.728000] ppdev: user-space parallel port driver
[ 31.072000] apm: BIOS not found.
[ 31.252000] Bluetooth: Core ver 2.11
[ 31.252000] NET: Registered protocol family 31
[ 31.252000] Bluetooth: HCI device and connection
manager initialized
[ 31.252000] Bluetooth: HCI socket layer initialized
[ 31.280000] Bluetooth: L2CAP ver 2.8
[ 31.280000] Bluetooth: L2CAP socket layer
initialized
[ 31.468000] Bluetooth: RFCOMM socket layer
initialized
[ 31.468000] Bluetooth: RFCOMM TTY layer initialized
[ 31.468000] Bluetooth: RFCOMM ver 1.8
[ 31.844000] [drm] Setting GART location based on
new memory map
[ 31.844000] [drm] Loading R300 Microcode
[ 31.844000] [drm] writeback test succeeded in 1
usecs
[ 60.524000] NET: Registered protocol family 10
[ 60.528000] lo: Disabled Privacy Extensions
[ 60.528000] ADDRCONF(NETDEV_UP): eth0: link is not
ready
[ 70.964000] eth1: no IPv6 routers present
[ 94.244000] ISO 9660 Extensions: Microsoft Joliet
Level 3
[ 94.292000] ISOFS: changing to secondary root
======================================================
____________________________________________________________________________________
Moody friends. Drama queens. Your life? Nope! - their life, your story. Play Sims Stories at Yahoo! Games.
http://sims.yahoo.com/
